Journal Articles
Ibrahim, P, Liogas, K, Naeem, M, Korsunsky, AM, Moat, RJ,
Attallah, MM (2025)
Rationalising the effect of post-additive manufacturing heat treatment on the deformation behaviour in Ti-34Nb-13Ta-5Zr-0.3O alloy using synchrotron diffraction,
Materials & Design, pp.115407-115407, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2025.115407.
Appleby, A, Khan, RHU, Teather, E, Hughes, L, Chiu, YL,
Attallah, M (2025)
Irradiation damage and powder quality impact on the strength of hot isostatically pressed ODS ferritic steel,
Materials Science & Engineering: A, A 949(2026), 149436, ISSN: 0921-5093. DOI:
10.1016/j.msea.2025.149436.
Aberkane, S, Mehdi, B, Badji, R,
Attallah, M, Fenineche, N, Alili, B (2025)
Effect of Reduction in Heat Input on the Behavior of 316LSi Thin Wall Fabricated by Wire Arc Additive Manufacturing,
Journal of Materials Engineering and Performance, 34(21), pp.25007-25020, ISSN: 1059-9495. DOI:
10.1007/s11665-025-11065-0.
Ersoz, TT, Mohamed, AE-MA, Bourhill, J, Goryachev, M, Mahmud, U, Jeong, M, Chiu, Y-L, Tobar, ME,
Attallah, MM (2025)
Innovative 3D Printed Nb47Ti superconducting microwave cavity: Manufacturing and performance,
Materials Research Bulletin, 195, pp.113825-113825, ISSN: 0025-5408. DOI:
10.1016/j.materresbull.2025.113825.
Ersoz, TT, Mohamed, AEMA, Jeong, M,
Attallah, MM (2025)
Tailored superconducting properties of laser powder bed fusion NbTi by nanosized artificial pinning centres,
Progress in Additive Manufacturing, ISSN: 2363-9512. DOI:
10.1007/s40964-025-01380-2.
Faizan Mohamed, AM, Careri, F, Khan, RHU,
Attallah, MM, Stella, L (2025)
A novel porosity prediction framework based on reinforcement learning for process parameter optimization in additive manufacturing,
Scripta Materialia, 255, pp.116377-116377, ISSN: 1359-6462. DOI:
10.1016/j.scriptamat.2024.116377.
Ersoz, TT, Mohamed, AE-MA, Mahmud, U, Jeong, M, Chiu, Y-L,
Attallah, MM (2025)
Exceptional superconducting properties in laser powder bed fusion Nb47Ti superconductors employing heat treatment post-processes,
Materials & Design, 258, pp.114681-114681, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2025.114681.
Heidary, H, de Lisi, M,
Attallah, MM, Cox, SC, El-kharouf, A, Steinberger-Wilckens, R (2025)
Developing lightweight porous distributors for polymer electrolyte fuel cells via laser powder bed fusion,
Journal of Power Sources, 656, ISSN: 0378-7753. DOI:
10.1016/j.jpowsour.2025.238066.
Ibrahim, P, Jameekornkul, P, Panesar, A,
Attallah, MM (2025)
The utility of additively manufactured β-Ti latticed hip implants in reducing femoral stress shielding: A finite element study,
Journal of the Mechanical Behavior of Biomedical Materials, 168, pp.106999-106999, ISSN: 1751-6161. DOI:
10.1016/j.jmbbm.2025.106999.
Fouad, DM, Panwisawas, C, Ge, H, Chiu, Y-L,
Attallah, MM (2025)
Achieving the strength-ductility balance through the control of the prior β-grain size in laser beam powder bed fusion of Ti-6Al-4V,
Additive Manufacturing, 109, pp.104842-104842, ISSN: 2214-8604. DOI:
10.1016/j.addma.2025.104842.
Careri, F, Khan, RHU, Alshammari, T,
Attallah, MM (2025)
Development of a novel heat treatment in L-PBF fabricated high strength A205 Al alloy: Impact on microstructure-mechanical properties,
Materials Science and Engineering: A, 933, pp.148278-148278, ISSN: 0921-5093. DOI:
10.1016/j.msea.2025.148278.
Duan, R, Liang, D, Ren, F, Daisenberger, D, Magdysyuk, OV, Luan, J, Jiao, Z,
Attallah, MM, Cai, B (2025)
Mechanical properties and deformation mechanisms of metastable β Ti-12Mo alloy fabricated by in-situ alloying-based additive manufacturing,
Additive Manufacturing, 107, pp.104819-104819, ISSN: 2214-8604. DOI:
10.1016/j.addma.2025.104819.
Mostaani, A, Wang, Y, Qian, L, Mohamed, AA,
Attallah, MM (2025)
Synthesis, design, and fabrication of filters with dual/multiple dangling nodes,
AEU - International Journal of Electronics and Communications, 195, pp.155785-155785, ISSN: 1434-8411. DOI:
10.1016/j.aeue.2025.155785.
Careri, F, Stella, L, Khan, RHU,
Attallah, MM (2025)
Application of machine learning in additive manufacturing of a novel Al alloy heat exchanger,
The International Journal of Advanced Manufacturing Technology, 137(9-10), pp.4557-4572, ISSN: 0268-3768. DOI:
10.1007/s00170-025-15389-y.
Ersoz, TT, Mohamed, AE-MA,
Attallah, MM (2025)
Additive manufacturing of superconductors: Opportunities and challenges,
Materials Research Bulletin, 189, pp.113448-113448, ISSN: 0025-5408. DOI:
10.1016/j.materresbull.2025.113448.
Li, S, Mao, Y, Chen, Z, Sun, K, Wang, J, Guo, C, Huang, Z, Wang, D,
Attallah, MM, Wang, C (2025)
Investigation of the segregation mechanism and mechanical properties of laser powder bed fusioned CM247LC Ni-superalloy,
Scripta Materialia, 257, pp.116482-116482, ISSN: 1359-6462. DOI:
10.1016/j.scriptamat.2024.116482.
Skaik, T, Hayward, E, Mohamed, AE-MA,
Attallah, MM, Qian, L, España, CM, Booth, P, Wang, Y (2024)
3D-Printed Dual-Mode Invar Channel Filters for Ku-Band Satellite Payloads,
IEEE Journal of Microwaves, 5(1), pp.170-179, DOI:
10.1109/jmw.2024.3509956.
Sun, K, Zhang, Y, Li, S, Gao, Z, Cao, X, Peng, Z, Huang, P, Mohamed, AE-MA, Zheng, Z, Jeong, M, Chiu, Y-L, Lu, Y,
Attallah, MM (2024)
Laser powder bed fusion processed LaCe(Fe, Mn, Si)₁₃ lattices for magnetic refrigeration: Process optimization, microstructure, and magnetocaloric performance,
Journal of Materials Research and Technology, 34, pp.297-310, ISSN: 2238-7854. DOI:
10.1016/j.jmrt.2024.12.049.
Sergi, A, Khan, RHU, Careri, F, Hamilton, H, Meisnar, M, Makaya, A,
Attallah, MM (2024)
Diffusion bonding of dissimilar materials for space applications via hot isostatic pressing,
Materials Letters, 376, pp.137260-137260, ISSN: 0167-577X. DOI:
10.1016/j.matlet.2024.137260.
Milleret, A, Laitinen, V, Ullakko, K, Fenineche, N,
Attallah, MM (2024)
In-situ alloying laser powder bed fusion of Ni-Mn-Ga magnetic shape memory alloy using liquid Ga,
Progress in Additive Manufacturing, 9(6), pp.2363-2373, ISSN: 2363-9512. DOI:
10.1007/s40964-024-00589-x.
Ibrahim, P, Garrard, R, Penchev, P, Man, K, Cox, SC, Dimov, S,
Attallah, MM (2024)
Hybrid manufacturing and performance evaluation of β Ti-alloy stents,
Materials & Design, 247, pp.113420-113420, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2024.113420.
Talha Ersoz, T, El-Moez A. Mohamed, A, Jeong, M, Morrison, K, Hughes, L, Chiu, Y-L,
Attallah, MM (2024)
Laser powder bed fusion of NbTi low-temperature superconductors,
Journal of Alloys and Compounds, 1008, 176502, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2024.176502.
Careri, F, Sergi, A, Shashkov, P, Khan, RHU,
Attallah, MM (2024)
Plasma electrolytic oxidation (PEO) as surface treatment for high strength Al alloys produced by L-PBF: Microstructure, performance, and effect of substrate surface roughness,
Surface and Coatings Technology, 489, pp.131122-131122, ISSN: 0257-8972. DOI:
10.1016/j.surfcoat.2024.131122.
Cardozo, EP, D'Oliveira, ASCM,
Attallah, MM (2024)
Laser powder bed fusion of pure Nb and Nb + WC powder mixture,
International Journal of Refractory Metals and Hard Materials, 122, pp.106687-106687, ISSN: 0263-4368. DOI:
10.1016/j.ijrmhm.2024.106687.
Ibrahim, P, Garrard, R,
Attallah, MM (2024)
Laser powder bed fusion of a β titanium alloy: Microstructural development, post-processing, and mechanical behaviour,
Materials Science and Engineering: A, 905, pp.146617-146617, ISSN: 0921-5093. DOI:
10.1016/j.msea.2024.146617.
Vashishtha, H, Jamshidi, P, Vrettou, A, Kareer, A, Goode, M, Deyhle, H, James, A, Ahmad, S, Reinhard, C,
Attallah, MM, Collins, DM (2024)
Microscale stress-geometry interactions in an additively manufactured NiTi cardiovascular stent: A synchrotron dual imaging tomography and diffraction study,
Materials Characterization, 213, pp.114016-114016, ISSN: 1044-5803. DOI:
10.1016/j.matchar.2024.114016.
Laitinen, V, Milleret, A, Namvari, M, De Vecchis, PR,
Attallah, MM, Chmielus, M, Ullakko, K (2024)
Powder-blown laser-based directed energy deposition of (14M) Ni-Mn-Ga magnetic shape memory alloy,
Additive Manufacturing, 90, pp.104328-104328, ISSN: 2214-8604. DOI:
10.1016/j.addma.2024.104328.
Avateffazeli, M, Shakil, SI, Behvar, A,
Attallah, MM, Simsiriwong, J, Tridello, A, Paolino, DS, Haghshenas, M (2024)
Very high cycle fatigue of laser powder bed fused Al-Cu-Mg-Ag-TiB2 (A20X) Alloy: Stress relief and aging treatments,
International Journal of Fatigue, 183, pp.108281-108281, ISSN: 0142-1123. DOI:
10.1016/j.ijfatigue.2024.108281.
Cullaz, T, Nematollahi, M, Safaei, K, Saint-Sulpice, L, Pino, L, Vanaei, S, Jamshidi, P,
Attallah, M, Benafan, O, Arbab Chirani, S, Elahinia, M (2024)
Effect of Post-treatments on the Thermomechanical Behavior of NiTiHf High-Temperature Shape Memory Alloy Fabricated with Laser Powder Bed Fusion,
Shape Memory and Superelasticity, 10(1), pp.45-54, ISSN: 2199-384X. DOI:
10.1007/s40830-023-00472-8.
Shakil, SI, Beamer, C,
Attallah, MM, Haghshenas, M (2024)
The Effect of Heat Treatment on Local Mechanical Properties of Laser Powder Bed Fused and Hot Isostatically Pressed Al-Cu-Mg-Ag-TiB2 (A20X) Aluminum Alloy,
JOM, 76(1), pp.31-41, ISSN: 1047-4838. DOI:
10.1007/s11837-023-06233-3.
Sun, K, Mohamed, AE-MA, Jeong, M, Head, J, Lewis, ER, Ibrahim, P, Brooks, OP, Sheridan, RS,
Attallah, MM (2023)
On the origin of cracking in laser powder bed fusion processed LaCe(Fe,Mn,Si)13, and the impact of post-processing,
Journal of Alloys and Compounds, 968, pp.172017-172017, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2023.172017.
Mostaani, A, Wang, Y, Qian, L, Mohamed, AE-MA,
Attallah, MM, Skaik, T (2023)
Compact Self-Supportive Filters Suitable for Additive Manufacturing,
IEEE Transactions on Components, Packaging and Manufacturing Technology, 13(12), pp.1966-1972, ISSN: 2156-3950. DOI:
10.1109/tcpmt.2023.3332678.
Careri, F, Khan, RHU, Todd, C,
Attallah, MM (2023)
Additive manufacturing of heat exchangers in aerospace applications: a review,
Applied Thermal Engineering, 235, pp.121387-121387, ISSN: 1359-4311. DOI:
10.1016/j.applthermaleng.2023.121387.
Sun, K, Li, S, Mohamed, AE-MA, Ma, K, Duan, R, Brooks, OP, Jeong, M, Head, J, Sheridan, RS,
Attallah, MM (2023)
The effect of thermal post-processing treatment on laser powder bed fusion processed NiMnSn-based alloy for magnetic refrigeration,
Journal of Alloys and Compounds, 961, pp.171063-171063, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2023.171063.
Tombakti, IA, Adesina, AY, Alharith, A,
Attallah, MM, AlMangour, B (2023)
Effect of Laser Mode and Power on the Tribological Behavior of Additively Manufactured Inconel 718 Alloy,
Journal of Tribology, 145(10), 101703, ISSN: 0742-4787. DOI:
10.1115/1.4062361.
Leo, JRO, Zabeen, S, Fitzpatrick, ME, Zou, J,
Attallah, MM (2023)
A study on the effects of laser shock peening on the microstructure and substructure of Ti–6Al–4V manufactured by Selective Laser Melting,
Journal of Materials Processing Technology, 316, pp.117959-117959, ISSN: 0924-0136. DOI:
10.1016/j.jmatprotec.2023.117959.
Qian, L, Martinez, R, Salek, M, Skaik, T,
Attallah, M, Wang, Y (2023)
Compact Monolithic 3D-Printed Wideband Filters Using Pole-Generating Resonant Irises,
IEEE Journal of Microwaves, 3(3), pp.1028-1039, DOI:
10.1109/jmw.2023.3271433.
Jiang, F, Tang, L, Li, S, Ye, H,
Attallah, MM, Yang, Z (2023)
Achieving strength-ductility balance in a laser powder bed fusion fabricated TiB2/Al–Cu-Mg-Ag alloy,
Journal of Alloys and Compounds, 945, pp.169311-169311, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2023.169311.
Sun, K, Mohamed, AE-MA, Li, S, Jeong, M, Head, J,
Attallah, MM (2023)
Laser powder bed fusion of the Ni-Mn-Sn Heusler alloy for magnetic refrigeration applications,
Additive Manufacturing, 69, pp.103536-103536, ISSN: 2214-8604. DOI:
10.1016/j.addma.2023.103536.
Li, Y,
Attallah, MM, Coules, H, Martinez, R, Pavier, M (2023)
Fatigue of octet-truss lattices manufactured by Laser Powder Bed Fusion,
International Journal of Fatigue, 170, pp.107524-107524, ISSN: 0142-1123. DOI:
10.1016/j.ijfatigue.2023.107524.
Mahmud, RH, Jarjees, RS, Yu, Y, Nugoolcharoenlap, E, Skaik, T,
Attallah, MM, Wang, Y (2023)
A Monolithically Printed Filtering Waveguide Aperture Antenna,
IEEE Antennas and Wireless Propagation Letters, 22(5), pp.1154-1158, ISSN: 1536-1225. DOI:
10.1109/lawp.2023.3235275.
Thomas-Seale, LEJ, Kanagalingam, S, Kirkman-Brown, JC,
Attallah, MM, Espino, DM, Shepherd, DET (2023)
Teaching design for additive manufacturing: efficacy of and engagement with lecture and laboratory approaches,
International Journal of Technology and Design Education, 33(2), pp.585-622, ISSN: 0957-7572. DOI:
10.1007/s10798-022-09741-6.
Li, W,
Attallah, MM, Essa, K (2023)
Heat-assisted incremental sheet forming for high-strength materials — a review,
The International Journal of Advanced Manufacturing Technology, 124(7-8), pp.2011-2036, ISSN: 0268-3768. DOI:
10.1007/s00170-022-10561-0.
Kong, W, Villapun, VM, Lu, Y, Carter, LN, Kuang, M, Cox, S,
Attallah, MM (2022)
The influence of thermal oxidation on the microstructure, fatigue properties, tribological and in vitro behaviour of laser powder bed fusion manufactured Ti-34 Nb-13Ta-5Zr-0.2O alloy,
Journal of Alloys and Compounds, 929, pp.167264-167264, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2022.167264.
Milleret, A, Laitinen, V, Ullakko, K, Fenineche, N,
Attallah, MM (2022)
Laser powder bed fusion of (14 M) Ni-Mn-Ga magnetic shape memory alloy lattices,
Additive Manufacturing, 60, pp.103231-103231, ISSN: 2214-8604. DOI:
10.1016/j.addma.2022.103231.
Abedi, H, Baghbaderani, KS, Alafaghani, A, Nematollahi, M, Kordizadeh, F,
Attallah, MM, Qattawi, A, Elahinia, M (2022)
Neural Network Modeling of NiTiHf Shape Memory Alloy Transformation Temperatures,
Journal of Materials Engineering and Performance, 31(12), pp.10258-10270, ISSN: 1059-9495. DOI:
10.1007/s11665-022-06995-y.
Li, S, Essa, K, Carr, J, Chiwanga, S, Norton, A,
Attallah, MM (2022)
The development of a high-performance Ni-superalloy additively manufactured heat pipe,
Advances in Manufacturing, 10(4), pp.610-624, ISSN: 2095-3127. DOI:
10.1007/s40436-022-00407-z.
Tan, C, Deng, C, Li, S, Abena, A, Jamshidi, P, Essa, K, Wu, L, Xu, G,
Attallah, MM, Liu, J (2022)
Mechanical property and biological behaviour of additive manufactured TiNi functionally graded lattice structure,
International Journal of Extreme Manufacturing, 4(4), pp.045003-045003, ISSN: 2631-8644. DOI:
10.1088/2631-7990/ac94fa.
Li, W, Shu, C, Hassan, A,
Attallah, MM, Essa, K (2022)
Application of machine learning on tool path optimisation and cooling lubricant in induction heating-assisted single point incremental sheet forming of Ti-6Al-4V sheets,
The International Journal of Advanced Manufacturing Technology, 123(3-4), pp.821-838, ISSN: 0268-3768. DOI:
10.1007/s00170-022-10213-3.
Li, W, Li, S, Li, X, Xu, D, Shao, Y,
Attallah, MM, Essa, K (2022)
Crystal plasticity model of induction heating-assisted incremental sheet forming with recrystallisation simulation in cellular automata,
The International Journal of Advanced Manufacturing Technology, 123(3-4), pp.903-925, ISSN: 0268-3768. DOI:
10.1007/s00170-022-10203-5.
He, R, Langi, E, Garrard, R,
Attallah, MM, Silberschmidt, V, Vogt, F, Zhao, L (2022)
In silico evaluation of additively manufactured 316L stainless steel stent in a patient-specific coronary artery,
Medical Engineering and Physics, 109, 103909, ISSN: 1350-4533. DOI:
10.1016/j.medengphy.2022.103909.
Villapun Puzas, VM, Carter, LN, Schröder, C, Colavita, PE, Hoey, DA, Webber, MA, Addison, O, Shepherd, DET,
Attallah, MM, Grover, LM, Cox, SC (2022)
Surface Free Energy Dominates the Biological Interactions of Postprocessed Additively Manufactured Ti-6Al-4V,
ACS Biomaterials Science & Engineering, 8(10), pp.4311-4326, ISSN: 2373-9878. DOI:
10.1021/acsbiomaterials.2c00298.
McGee, OM, Geraghty, S, Hughes, C, Jamshidi, P, Kenny, DP,
Attallah, MM, Lally, C (2022)
An investigation into patient-specific 3D printed titanium stents and the use of etching to overcome Selective Laser Melting design constraints,
Journal of the Mechanical Behavior of Biomedical Materials, 134, pp.105388-105388, ISSN: 1751-6161. DOI:
10.1016/j.jmbbm.2022.105388.
Chen, P, Yao, X,
Attallah, MM, Yan, M (2022)
In-situ alloyed CoCrFeMnNi high entropy alloy: Microstructural development in laser powder bed fusion,
Journal of Materials Science & Technology, 123, pp.123-135, ISSN: 1005-0302. DOI:
10.1016/j.jmst.2021.11.083.
Tosi, R, Leung, CLA, Tan, X, Muzangaza, E,
Attallah, MM (2022)
Revealing the microstructural evolution of electron beam powder bed fusion and hot isostatic pressing Ti-6Al-4V in-situ shelling samples using X-ray computed tomography,
Additive Manufacturing, 57, pp.102962-102962, ISSN: 2214-8604. DOI:
10.1016/j.addma.2022.102962.
Salem, H, Ibrahim, P,
Attallah, MM, Salem, HG (2022)
Effect of Oxygen Diffusion During the Post-Processing of Ti6Al4V Lattice Structures Fabricated by the Selective Laser Melting Process,
Journal of Engineering Materials and Technology, 144(3), 031006, ISSN: 0094-4289. DOI:
10.1115/1.4053870.
Tang, L, Jiang, FQ, Wróbel, JS, Liu, B, Kabra, S, Duan, RX, Luan, JH, Jiao, ZB,
Attallah, MM, Nguyen-Manh, D, Cai, B (2022)
In situ neutron diffraction unravels deformation mechanisms of a strong and ductile FeCrNi medium entropy alloy,
Journal of Materials Science & Technology, 116, pp.103-120, ISSN: 1005-0302. DOI:
10.1016/j.jmst.2021.10.034.
Kong, W, Cox, SC, Lu, Y, Villapun, V, Xiao, X, Ma, W, Liu, M,
Attallah, MM (2022)
Microstructural Evolution, Mechanical Properties, and Preosteoblast Cell Response of a Post-Processing-Treated TNT5Zr β Ti Alloy Manufactured via Selective Laser Melting,
ACS Biomaterials Science & Engineering, 8(6), pp.2336-2348, ISSN: 2373-9878. DOI:
10.1021/acsbiomaterials.1c01277.
Ansari, MA, Crampton, A, Garrard, R, Cai, B,
Attallah, M (2022)
A Convolutional Neural Network (CNN) classification to identify the presence of pores in powder bed fusion images,
The International Journal of Advanced Manufacturing Technology, 120(7-8), pp.5133-5150, ISSN: 0268-3768. DOI:
10.1007/s00170-022-08995-7.
Anis, G,
Attallah, MM, Youssef, M, Salem, H (2022)
Temperature-dependent enthalpy and entropy stabilization of solid solution phases in non-equiatomic CoCrFeNiTi high entropy alloys: computational phase diagrams and thermodynamics,
Modelling and Simulation in Materials Science and Engineering, 30(4), pp.045013-045013, ISSN: 0965-0393. DOI:
10.1088/1361-651x/ac6687.
Kong, W, Francis, EM, Shi, Q, Cox, SC, Wang, F, Kuang, M,
Attallah, MM (2022)
The influence of advanced hot isostatic pressing on phase transformations, mechanical properties of Ti-34Nb-13Ta-5Zr-0.2O alloy manufactured by In-situ alloying via selective laser melting,
Journal of Alloys and Compounds, 903, pp.163974-163974, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2022.163974.
Skaik, T, Wang, Y, Salek, M, Hunyor, P, Wang, H, Huggard, PG, Starke, T,
Attallah, M, Martinez, R (2022)
A 3-D Printed 300 GHz Waveguide Cavity Filter by Micro Laser Sintering,
IEEE Transactions on Terahertz Science and Technology, 12(3), pp.274-281, ISSN: 2156-342X. DOI:
10.1109/tthz.2022.3147042.
Mohammed, AM, Wang, Y, Skaik, T, Li, S,
Attallah, M (2022)
Conductivity measurement using 3D printed re-entrant cavity resonator,
Measurement Science and Technology, 33(5), pp.055017-055017, ISSN: 0957-0233. DOI:
10.1088/1361-6501/ac5134.
Qian, L, Wang, Y, Li, S, Mohamed, AE-MA,
Attallah, MM, Skaik, T, Booth, P, Pambaguian, L, Espana, CM, Martin-Iglesias, P (2022)
A Narrowband 3-D Printed Invar Spherical Dual-Mode Filter With High Thermal Stability for OMUXs,
IEEE Transactions on Microwave Theory and Techniques, 70(4), pp.2165-2173, ISSN: 0018-9480. DOI:
10.1109/tmtt.2022.3152795.
Sergi, A, Khan, RHU, Georgilas, K, Meisnar, M, Makaya, A,
Attallah, MM (2022)
Powder HIP of pure Nb and C-103 alloy: The influence of powder characteristics on mechanical properties,
International Journal of Refractory Metals and Hard Materials, 104, pp.105803-105803, ISSN: 0263-4368. DOI:
10.1016/j.ijrmhm.2022.105803.
Garrard, R, Lynch, D, Carter, LN, Adkins, NJE, Gie, R, Chouteau, E, Pambaguian, L,
Attallah, MM (2022)
Comparison of LPBF processing of AlSi40 alloy using blended and pre-alloyed powder,
Additive Manufacturing Letters, 2, pp.100038-100038, ISSN: 2772-3690. DOI:
10.1016/j.addlet.2022.100038.
Jamshidi, P, Panwisawas, C, Langi, E, Cox, SC, Feng, J, Zhao, L,
Attallah, MM (2022)
Development, characterisation, and modelling of processability of nitinol stents using laser powder bed fusion,
Journal of Alloys and Compounds, 909, 164681, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2022.164681.
Langi, E, Zhao, L, Jamshidi, P,
Attallah, M, Silberschmidt, V, Willcock, H, Vogt, F (2022)
A comparative study of microstructures and nanomechanical properties of additively manufactured and commercial metallic stents,
Materials Today Communications, 31, 103372, ISSN: 2352-4928. DOI:
10.1016/j.mtcomm.2022.103372.
Mohamed, AE-MA, Jeong, M, Sheridan, RS,
Attallah, MM (2022)
Enabling high efficiency magnetic refrigeration using laser powder bed fusion of porous LaCe(Fe,Mn,Si)13 structures,
Additive Manufacturing, 51, pp.102620-102620, ISSN: 2214-8604. DOI:
10.1016/j.addma.2022.102620.
Lewis, ER, Taylor, MP, Attard, B, Cruchley, N, Morrison, APC,
Attallah, MM, Cruchley, S (2022)
Microstructural characterisation and high-temperature oxidation of laser powder bed fusion processed Inconel 625,
Materials Letters, 311, pp.131582-131582, ISSN: 0167-577X. DOI:
10.1016/j.matlet.2021.131582.
Tosi, R, Muzangaza, E, Tan, XP, Wimpenny, D,
Attallah, MM (2022)
Hybrid Electron Beam Powder Bed Fusion Additive Manufacturing of Ti–6Al–4V: Processing, Microstructure, and Mechanical Properties,
Metallurgical and Materials Transactions A, 53(3), pp.927-941, ISSN: 1073-5623. DOI:
10.1007/s11661-021-06565-2.
Kong, W, Shi, Q, Cox, SC, Kuang, M,
Attallah, MM (2022)
Microstructure, tensile properties of SLMed TNT5Zr-0.2O alloys without/with keyholes produced by different Post-processing treatments,
Materials Letters, 309, pp.131448-131448, ISSN: 0167-577X. DOI:
10.1016/j.matlet.2021.131448.
Sergi, A, Khan, RHU, Irukuvarghula, S, Meisnar, M, Makaya, A,
Attallah, MM (2022)
Development of Ni-base metal matrix composites by powder metallurgy hot isostatic pressing for space applications,
Advanced Powder Technology, 33(2), pp.103411-103411, ISSN: 0921-8831. DOI:
10.1016/j.apt.2021.103411.
Li, S, Wang, M, Essa, K, Gan, C, Liu, C,
Attallah, M (2022)
Effect of Stoichiometry on Shape Memory Properties of Ti-Ni-Hf-Cu-Nb Shape Memory Alloys Manufactured by Suspended Droplet Alloying,
Solids, 3(1), pp.1-21, DOI:
10.3390/solids3010001.
Li, W,
Attallah, MM, Essa, K (2022)
Experimental and numerical investigations on the process quality and microstructure during induction heating assisted incremental forming of Ti-6Al-4V sheet,
Journal of Materials Processing Technology, 299, pp.117323-117323, ISSN: 0924-0136. DOI:
10.1016/j.jmatprotec.2021.117323.
Li, S, Cai, B, Duan, R, Tang, L, Song, Z, White, D, Magdysyuk, OV,
Attallah, MM (2022)
Synchrotron Characterisation of Ultra-Fine Grain TiB2/Al-Cu Composite Fabricated by Laser Powder Bed Fusion,
Acta Metallurgica Sinica (English Letters), 35(1), pp.78-92, ISSN: 1006-7191. DOI:
10.1007/s40195-021-01317-y.
Mohamed, AE-MA, Sheridan, RS, Bongs, K,
Attallah, MM (2021)
Microstructure-magnetic shielding development in additively manufactured Ni-Fe-Mo soft magnet alloy in the as fabricated and post-processed conditions,
Journal of Alloys and Compounds, 884, pp.161112-161112, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2021.161112.
Wang, D, Li, S, Deng, G, Liu, Y,
Attallah, MM (2021)
A Melt Pool Temperature Model in Laser Powder Bed Fabricated CM247LC Ni Superalloy to Rationalize Crack Formation and Microstructural Inhomogeneities,
Metallurgical and Materials Transactions A, 52(12), pp.5221-5234, ISSN: 1073-5623. DOI:
10.1007/s11661-021-06457-5.
Kong, W, Cox, SC, Lu, Y, Villapun, V, Xiao, X, Ma, W, Liu, M,
Attallah, MM (2021)
The influence of zirconium content on the microstructure, mechanical properties, and biocompatibility of in-situ alloying Ti-Nb-Ta based β alloys processed by selective laser melting,
Materials Science and Engineering: C, 131, pp.112486-112486, ISSN: 0928-4931. DOI:
10.1016/j.msec.2021.112486.
Alhuzaim, A, Imbrogno, S,
Attallah, MM (2021)
Direct laser deposition of crack-free CM247LC thin walls: Mechanical properties and microstructural effects of heat treatment,
Materials & Design, 211, pp.110123-110123, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2021.110123.
Piglione, A, Attard, B, Vieira Rielli, V, Santos Maldonado, C-T,
Attallah, MM, Primig, S, Pham, M-S (2021)
On the constitutive relationship between solidification cells and the fatigue behaviour of IN718 fabricated by laser powder bed fusion,
Additive Manufacturing, 47, pp.102347-102347, ISSN: 2214-8604. DOI:
10.1016/j.addma.2021.102347.
Wen, X, Guo, C, Shang, X, Yu, Y, Shu, M, Yang, Q, Li, S,
Attallah, MM, Liu, H, Zhang, A (2021)
SLM Printed Waveguide Dual-Mode Filters With Reduced Sensitivity to Fabrication Imperfections,
IEEE Microwave and Wireless Components Letters, 31(11), pp.1195-1198, ISSN: 1531-1309. DOI:
10.1109/lmwc.2021.3096977.
Duan, R, Li, S, Cai, B, Tao, Z, Zhu, W, Ren, F,
Attallah, MM (2021)
In situ alloying based laser powder bed fusion processing of β Ti–Mo alloy to fabricate functionally graded composites,
Composites Part B: Engineering, 222, pp.109059-109059, ISSN: 1359-8368. DOI:
10.1016/j.compositesb.2021.109059.
Guo, C, Yu, Y, Li, S, Wen, X, Zhang, A, Wang, Y,
Attallah, M (2021)
Monolithic 3D printed waveguide filters with wide spurious‐free stopbands using dimpled spherical resonators,
IET Microwaves, Antennas & Propagation, 15(12), pp.1657-1670, ISSN: 1751-8725. DOI:
10.1049/mia2.12178.
Alhuzaim, A, Imbrogno, S,
Attallah, MM (2021)
Controlling microstructural and mechanical properties of direct laser deposited Inconel 718 via laser power,
Journal of Alloys and Compounds, 872, pp.159588-159588, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2021.159588.
Tan, C, Zou, J, Li, S, Jamshidi, P, Abena, A, Forsey, A, Moat, RJ, Essa, K, Wang, M, Zhou, K,
Attallah, MM (2021)
Additive manufacturing of bio-inspired multi-scale hierarchically strengthened lattice structures,
International Journal of Machine Tools and Manufacture, 167, pp.103764-103764, ISSN: 0890-6955. DOI:
10.1016/j.ijmachtools.2021.103764.
Hastie, JC, Koelblin, J, Kartal, ME,
Attallah, MM, Martinez, R (2021)
Evolution of internal pores within AlSi10Mg manufactured by laser powder bed fusion under tension: As-built and heat treated conditions,
Materials & Design, 204, pp.109645-109645, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2021.109645.
Hassanin, H, Zweiri, Y, Finet, L, Essa, K, Qiu, C,
Attallah, M (2021)
Laser Powder Bed Fusion of Ti-6Al-2Sn-4Zr-6Mo Alloy and Properties Prediction Using Deep Learning Approaches,
Materials, 14(8), pp.2056-2056, DOI:
10.3390/ma14082056.
Careri, F, Umbrello, D, Essa, K,
Attallah, MM, Imbrogno, S (2021)
The effect of the heat treatments on the tool wear of hybrid Additive Manufacturing of IN718,
Wear, 470-471, pp.203617-203617, ISSN: 0043-1648. DOI:
10.1016/j.wear.2021.203617.
Imbrogno, S, Alhuzaim, A,
Attallah, MM (2021)
Influence of the laser source pulsing frequency on the direct laser deposited Inconel 718 thin walls,
Journal of Alloys and Compounds, 856, pp.158095-158095, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2020.158095.
Sergi, A, Khan, RHU,
Attallah, MM (2021)
The role of powder atomisation route on the microstructure and mechanical properties of hot isostatically pressed Inconel 625,
Materials Science and Engineering: A, 808, pp.140950-140950, ISSN: 0921-5093. DOI:
10.1016/j.msea.2021.140950.
Langi, E, Zhao, L, Jamshidi, P,
Attallah, M, Silberschmidt, V, Willcock, H, Vogt, F (2021)
Microstructural and mechanical characterization of thin-walled tube manufactured with selective laser melting for stent application,
Journal of Materials Engineering and Performance, 30(1), pp.696-710, ISSN: 1059-9495. DOI:
10.1007/s11665-020-05366-9.
Careri, F, Imbrogno, S, Umbrello, D,
Attallah, MM, Outeiro, J, Batista, AC (2021)
Machining and heat treatment as post-processing strategies for Ni-superalloys structures fabricated using direct energy deposition,
Journal of Manufacturing Processes, 61, pp.236-244, ISSN: 1526-6125. DOI:
10.1016/j.jmapro.2020.11.024.
Duan, R, Li, S, Cai, B, Zhu, W, Ren, F,
Attallah, MM (2021)
A high strength and low modulus metastable β Ti-12Mo-6Zr-2Fe alloy fabricated by laser powder bed fusion in-situ alloying,
Additive Manufacturing, 37, DOI:
10.1016/j.addma.2020.101708.
Attard, B, Cruchley, S, Beetz, C, Megahed, M, Chiu, YL,
Attallah, MM (2020)
Microstructural control during laser powder fusion to create graded microstructure Ni-superalloy components,
Additive Manufacturing, 36, pp.101432-101432, ISSN: 2214-8604. DOI:
10.1016/j.addma.2020.101432.
Ge, R, Humbert, G, Martinez, R,
Attallah, MM, Sciacovelli, A (2020)
Additive manufacturing of a topology-optimised multi-tube energy storage device: Experimental tests and numerical analysis,
Applied Thermal Engineering, 180, pp.115878-115878, ISSN: 1359-4311. DOI:
10.1016/j.applthermaleng.2020.115878.
Chen, P, Yang, C, Li, S,
Attallah, MM, Yan, M (2020)
In-situ alloyed, oxide-dispersion-strengthened CoCrFeMnNi high entropy alloy fabricated via laser powder bed fusion,
Materials & Design, 194, pp.108966-108966, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2020.108966.
Jamshidi, P, Aristizabal, M, Kong, W, Villapun, V, Cox, SC, Grover, LM,
Attallah, MM (2020)
Selective Laser Melting of Ti-6Al-4V: The Impact of Post-processing on the Tensile, Fatigue and Biological Properties for Medical Implant Applications,
Materials, 13(12), pp.2813-2813, DOI:
10.3390/ma13122813.
Wang, X, Carter, LN, Adkins, NJE, Essa, K,
Attallah, MM (2020)
Novel Hybrid Manufacturing Process of CM247LC and Multi-Material Blisks,
Micromachines, 11(5), pp.492-492, DOI:
10.3390/mi11050492.
Hastie, JC, Kartal, ME, Carter, LN,
Attallah, MM, Mulvihill, DM (2020)
Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: Influence of processing parameters and heat treatment,
Materials Characterization, 163, pp.110225-110225, ISSN: 1044-5803. DOI:
10.1016/j.matchar.2020.110225.
Chen, P, Li, S, Zhou, Y, Yan, M,
Attallah, MM (2020)
Fabricating CoCrFeMnNi high entropy alloy via selective laser melting in-situ alloying,
Journal of Materials Science & Technology, 43, pp.40-43, ISSN: 1005-0302. DOI:
10.1016/j.jmst.2020.01.002.
Tang, L, Yan, K, Cai, B, Wang, Y, Liu, B, Kabra, S,
Attallah, MM, Liu, Y (2020)
Deformation mechanisms of FeCoCrNiMo0.2 high entropy alloy at 77 and 15 K,
Scripta Materialia, 178, pp.166-170, ISSN: 1359-6462. DOI:
10.1016/j.scriptamat.2019.11.026.
Osman, MM, Shazly, M, El-Danaf, EA, Jamshidi, P,
Attallah, MM (2020)
Compressive behavior of stretched and composite microlattice metamaterial for energy absorption applications,
Composites Part B: Engineering, 184, pp.107715-107715, ISSN: 1359-8368. DOI:
10.1016/j.compositesb.2019.107715.
Mohamed, AE-MA, Zou, J, Sheridan, RS, Bongs, K,
Attallah, MM (2020)
Magnetic shielding promotion via the control of magnetic anisotropy and thermal Post processing in laser powder bed fusion processed NiFeMo-based soft magnet,
Additive Manufacturing, 32, pp.101079-101079, ISSN: 2214-8604. DOI:
10.1016/j.addma.2020.101079.
Field, AC, Carter, LN, Adkins, NJE,
Attallah, MM, Gorley, MJ, Strangwood, M (2020)
The Effect of Powder Characteristics on Build Quality of High-Purity Tungsten Produced via Laser Powder Bed Fusion (LPBF),
Metallurgical and Materials Transactions A, 51(3), pp.1367-1378, ISSN: 1073-5623. DOI:
10.1007/s11661-019-05601-6.
Hunter, LW, Brackett, D, Brierley, N, Yang, J,
Attallah, MM (2020)
Assessment of trapped powder removal and inspection strategies for powder bed fusion techniques,
The International Journal of Advanced Manufacturing Technology, 106(9-10), pp.4521-4532, ISSN: 0268-3768. DOI:
10.1007/s00170-020-04930-w.
Aristizabal, M, Jamshidi, P, Saboori, A, Cox, SC,
Attallah, MM (2020)
Laser powder bed fusion of a Zr-alloy: Tensile properties and biocompatibility,
Materials Letters, 259, pp.126897-126897, ISSN: 0167-577X. DOI:
10.1016/j.matlet.2019.126897.
Gu, H, Li, S, Pavier, M,
Attallah, MM, Paraskevoulakos, C, Shterenlikht, A (2019)
Fracture of three-dimensional lattices manufactured by selective laser melting,
International Journal of Solids and Structures, 180-181, pp.147-159, ISSN: 0020-7683. DOI:
10.1016/j.ijsolstr.2019.07.020.
Salem, H, Carter, LN,
Attallah, MM, Salem, HG (2019)
Influence of processing parameters on internal porosity and types of defects formed in Ti6Al4V lattice structure fabricated by selective laser melting,
Materials Science and Engineering: A, 767, pp.138387-138387, ISSN: 0921-5093. DOI:
10.1016/j.msea.2019.138387.
Boswell, JH, Clark, D, Li, W,
Attallah, MM (2019)
Corrigendum to “Cracking during thermal post-processing of laser powder bed fabricated CM247LC Ni-superalloy” [Materials & Design, 174, 15 July 2019, 107793],
Materials & Design, 179, pp.107996-107996, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2019.107996.
Ahmed, MMZ, El-Sayed Seleman, MM, Shazly, M,
Attallah, MM, Ahmed, E (2019)
Microstructural Development and Mechanical Properties of Friction Stir Welded Ferritic Stainless Steel AISI 409,
Journal of Materials Engineering and Performance, 28(10), pp.6391-6406, ISSN: 1059-9495. DOI:
10.1007/s11665-019-04365-9.
Boswell, JH, Clark, D, Li, W,
Attallah, MM (2019)
Cracking during thermal post-processing of laser powder bed fabricated CM247LC Ni-superalloy,
Materials & Design, 174, pp.107793-107793, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2019.107793.
Hanemann, T, Carter, LN, Habschied, M, Adkins, NJE,
Attallah, MM, Heilmaier, M (2019)
In-situ alloying of AlSi10Mg+Si using Selective Laser Melting to control the coefficient of thermal expansion,
Journal of Alloys and Compounds, 795, pp.8-18, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2019.04.260.
MacDonald, JE, Khan, RHU, Aristizabal, M, Essa, KEA, Lunt, MJ,
Attallah, MM (2019)
Influence of powder characteristics on the microstructure and mechanical properties of HIPped CM247LC Ni superalloy,
Materials & Design, 174, pp.107796-107796, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2019.107796.
Irukuvarghula, S, Hassanin, H, Cayron, C, Aristizabal, M,
Attallah, MM, Preuss, M (2019)
Effect of powder characteristics and oxygen content on modifications to the microstructural topology during hot isostatic pressing of an austenitic steel,
Acta Materialia, 172, pp.6-17, ISSN: 1359-6454. DOI:
10.1016/j.actamat.2019.03.038.
Tan, C, Li, S, Essa, K, Jamshidi, P, Zhou, K, Ma, W,
Attallah, MM (2019)
Laser Powder Bed Fusion of Ti-rich TiNi lattice structures: Process optimisation, geometrical integrity, and phase transformations,
International Journal of Machine Tools and Manufacture, 141, pp.19-29, ISSN: 0890-6955. DOI:
10.1016/j.ijmachtools.2019.04.002.
Li, J, Li, S, Huang, G, Yuan, T,
Attallah, MM (2019)
Monolithic 3D‐printed slotted hemisphere resonator bandpass filter with extended spurious‐free stopband,
Electronics Letters, 55(6), pp.331-333, ISSN: 0013-5194. DOI:
10.1049/el.2018.7850.
Zhou, N, Gan, C, Song, D, Qi, W,
Attallah, MM (2019)
Influence of Forging Pressure on Microstructural and Mechanical Properties Development in Linear Friction Welded Al-Cu Dissimilar Joint,
Soldagem & Inspeção, 24, e2401, ISSN: 0104-9224. DOI:
10.1590/0104-9224/si2304.08.
Thomas-Seale, LEJ, Kirkman-Brown, JC, Kanagalingam, S,
Attallah, MM, Espino, DM, Shepherd, DET (2019)
The analogies between human development and additive manufacture: Expanding the definition of design,
Cogent Engineering, 6(1), 1662631, DOI:
10.1080/23311916.2019.1662631.
Burton, HE, Eisenstein, NM, Lawless, BM, Jamshidi, P, Segarra, MA, Addison, O, Shepherd, DET,
Attallah, MM, Grover, LM, Cox, SC (2019)
The design of additively manufactured lattices to increase the functionality of medical implants,
Materials Science and Engineering: C, 94, pp.901-908, ISSN: 0928-4931. DOI:
10.1016/j.msec.2018.10.052.
Zhang, F, Gao, S, Li, J, Yu, Y, Guo, C, Li, S,
Attallah, M, Shang, X, Wang, Y, Lancaster, MJ, Xu, J (2019)
3-D Printed Slotted Spherical Resonator Bandpass Filters With Spurious Suppression,
IEEE Access, 7, pp.128026-128034, DOI:
10.1109/access.2019.2938972.
Mohammed-Ali, HB, Street, SR,
Attallah, MM, Davenport, AJ (2018)
Effect of Microstructure on the Morphology of Atmospheric Corrosion Pits in Type 304L Stainless Steel,
Corrosion, 74(12), pp.1373-1384, ISSN: 0010-9312. DOI:
10.5006/2935.
Larrosa, NO, Wang, W, Read, N, Loretto, MH, Evans, C, Carr, J, Tradowsky, U,
Attallah, MM, Withers, PJ (2018)
Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy,
Theoretical and Applied Fracture Mechanics, 98, pp.123-133, ISSN: 0167-8442. DOI:
10.1016/j.tafmec.2018.09.011.
Li, S, Adkins, NJE, McCain, S,
Attallah, MM (2018)
Suspended droplet alloying: A new method for combinatorial alloy synthesis; nitinol-based alloys as an example,
Journal of Alloys and Compounds, 768, pp.392-398, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2018.07.260.
Zou, J, Gaber, Y, Voulazeris, G, Li, S, Vazquez, L, Liu, L-F, Yao, M-Y, Wang, Y-J, Holynski, M, Bongs, K,
Attallah, MM (2018)
Controlling the grain orientation during laser powder bed fusion to tailor the magnetic characteristics in a Ni-Fe based soft magnet,
Acta Materialia, 158, pp.230-238, ISSN: 1359-6454. DOI:
10.1016/j.actamat.2018.07.064.
Bidare, P, Bitharas, I, Ward, RM,
Attallah, MM, Moore, AJ (2018)
Laser powder bed fusion in high-pressure atmospheres,
The International Journal of Advanced Manufacturing Technology, 99(1-4), pp.543-555, ISSN: 0268-3768. DOI:
10.1007/s00170-018-2495-7.
Bidare, P, Bitharas, I, Ward, RM,
Attallah, MM, Moore, AJ (2018)
Laser powder bed fusion at sub-atmospheric pressures,
International Journal of Machine Tools and Manufacture, 130-131, pp.65-72, ISSN: 0890-6955. DOI:
10.1016/j.ijmachtools.2018.03.007.
Thomas-Seale, LEJ, Kirkman-Brown, JC,
Attallah, MM, Espino, DM, Shepherd, DET (2018)
The barriers to the progression of additive manufacture: Perspectives from UK industry,
International Journal of Production Economics, 198, pp.104-118, ISSN: 0925-5273. DOI:
10.1016/j.ijpe.2018.02.003.
Zhou, N, Song, D, Qi, W, Li, X, Zou, J,
Attallah, MM (2018)
Influence of the kissing bond on the mechanical properties and fracture behaviour of AA5083-H112 friction stir welds,
Materials Science and Engineering: A, 719, pp.12-20, ISSN: 0921-5093. DOI:
10.1016/j.msea.2018.02.011.
Hassanin, H, Finet, L, Cox, SC, Jamshidi, P, Grover, LM, Shepherd, DET, Addison, O,
Attallah, MM (2018)
Tailoring selective laser melting process for titanium drug-delivering implants with releasing micro-channels,
Additive Manufacturing, 20, pp.144-155, ISSN: 2214-8604. DOI:
10.1016/j.addma.2018.01.005.
Jamshidi, P, Lu, N, Liu, G, Herny, E,
Attallah, MM (2018)
Netshape centrifugal gel-casting of high-temperature sialon ceramics,
Ceramics International, 44(3), pp.3440-3447, ISSN: 0272-8842. DOI:
10.1016/j.ceramint.2017.11.143.
Vovrosh, J, Voulazeris, G, Petrov, PG, Zou, J, Gaber, Y, Benn, L, Woolger, D,
Attallah, MM, Boyer, V, Bongs, K, Holynski, M (2018)
Additive manufacturing of magnetic shielding and ultra-high vacuum flange for cold atom sensors,
Scientific Reports, 8(1), 2023, DOI:
10.1038/s41598-018-20352-x.
Bidare, P, Bitharas, I, Ward, RM,
Attallah, MM, Moore, AJ (2018)
Fluid and particle dynamics in laser powder bed fusion,
Acta Materialia, 142, pp.107-120, ISSN: 1359-6454. DOI:
10.1016/j.actamat.2017.09.051.
Essa, K, Jamshidi, P, Zou, J,
Attallah, MM, Hassanin, H (2018)
Porosity control in 316L stainless steel using cold and hot isostatic pressing,
Materials & Design, 138, pp.21-29, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2017.10.025.
Cox, SC, Jamshidi, P, Eisenstein, NM, Webber, MA, Burton, H, Moakes, RJA, Addison, O,
Attallah, M, Shepherd, DET, Grover, LM (2017)
Surface Finish has a Critical Influence on Biofilm Formation and Mammalian Cell Attachment to Additively Manufactured Prosthetics,
ACS Biomaterials Science & Engineering, 3(8), pp.1616-1626, ISSN: 2373-9878. DOI:
10.1021/acsbiomaterials.7b00336.
Irukuvarghula, S, Hassanin, H, Cayron, C,
Attallah, MM, Stewart, D, Preuss, M (2017)
Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing,
Acta Materialia, 133, pp.269-281, ISSN: 1359-6454. DOI:
10.1016/j.actamat.2017.04.068.
Essa, K, Hassanin, H,
Attallah, MM, Adkins, NJ, Musker, AJ, Roberts, GT, Tenev, N, Smith, M (2017)
Development and testing of an additively manufactured monolithic catalyst bed for HTP thruster applications,
Applied Catalysis A: General, 542, pp.125-135, ISSN: 0926-860X. DOI:
10.1016/j.apcata.2017.05.019.
Hassanin, H, Essa, K, Qiu, C, Abdelhafeez, AM, Adkins, NJE,
Attallah, MM (2017)
Net-shape manufacturing using hybrid selective laser melting/hot isostatic pressing,
Rapid Prototyping Journal, 23(4), pp.720-726, ISSN: 1355-2546. DOI:
10.1108/rpj-02-2016-0019.
Guo, Y,
Attallah, MM, Chiu, Y, Li, H, Bray, S, Bowen, P (2017)
Spatial variation of microtexture in linear friction welded Ti-6Al-4V,
Materials Characterization, 127, pp.342-347, ISSN: 1044-5803. DOI:
10.1016/j.matchar.2017.03.019.
Wang, X, Carter, LN, Pang, B,
Attallah, MM, Loretto, MH (2017)
Microstructure and yield strength of SLM-fabricated CM247LC Ni-Superalloy,
Acta Materialia, 128, pp.87-95, ISSN: 1359-6454. DOI:
10.1016/j.actamat.2017.02.007.
Panwisawas, C, Qiu, C, Anderson, MJ, Sovani, Y, Turner, RP,
Attallah, MM, Brooks, JW, Basoalto, HC (2017)
Mesoscale modelling of selective laser melting: Thermal fluid dynamics and microstructural evolution,
Computational Materials Science, 126, pp.479-490, ISSN: 0927-0256. DOI:
10.1016/j.commatsci.2016.10.011.
Qiu, C, Fones, A, Hamilton, HGC, Adkins, NJE,
Attallah, MM (2016)
A new approach to develop palladium-modified Ti-based alloys for biomedical applications,
Materials & Design, 109, pp.98-111, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2016.07.055.
Attallah, MM, Jennings, R, Wang, X, Carter, LN (2016)
Additive manufacturing of Ni-based superalloys: The outstanding issues,
MRS Bulletin, 41(10), pp.758-764, ISSN: 0883-7694. DOI:
10.1557/mrs.2016.211.
Ravi, GA, Qiu, C,
Attallah, MM (2016)
Microstructural control in a Ti-based alloy by changing laser processing mode and power during direct laser deposition,
Materials Letters, 179, pp.104-108, ISSN: 0167-577X. DOI:
10.1016/j.matlet.2016.05.038.
Wu, J, Wang, XQ, Wang, W,
Attallah, MM, Loretto, MH (2016)
Microstructure and strength of selectively laser melted AlSi10Mg,
Acta Materialia, 117, pp.311-320, ISSN: 1359-6454. DOI:
10.1016/j.actamat.2016.07.012.
Tradowsky, U, White, J, Ward, RM, Read, N, Reimers, W,
Attallah, MM (2016)
Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development,
Materials & Design, 105, pp.212-222, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2016.05.066.
(2016)
Superalloys 2016, DOI:
10.1002/9781119075646.
Cox, SC, Jamshidi, P, Eisenstein, NM, Webber, MA, Hassanin, H,
Attallah, MM, Shepherd, DET, Addison, O, Grover, LM (2016)
Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants,
Materials Science and Engineering: C, 64, pp.407-415, ISSN: 0928-4931. DOI:
10.1016/j.msec.2016.04.006.
Carter, LN, Wang, X, Read, N, Khan, R, Aristizabal, M, Essa, K,
Attallah, MM (2016)
Process optimisation of selective laser melting using energy density model for nickel based superalloys,
Materials Science and Technology, 32(7), pp.657-661, ISSN: 0267-0836. DOI:
10.1179/1743284715y.0000000108.
Essa, K, Khan, R, Hassanin, H,
Attallah, MM, Reed, R (2016)
An iterative approach of hot isostatic pressing tooling design for net-shape IN718 superalloy parts,
The International Journal of Advanced Manufacturing Technology, 83(9-12), pp.1835-1845, ISSN: 0268-3768. DOI:
10.1007/s00170-015-7603-3.
Li, S, Hassanin, H,
Attallah, MM, Adkins, NJE, Essa, K (2016)
The development of TiNi-based negative Poisson's ratio structure using selective laser melting,
Acta Materialia, 105, pp.75-83, ISSN: 1359-6454. DOI:
10.1016/j.actamat.2015.12.017.
Qiu, C, Adkins, NJE,
Attallah, MM (2016)
Selective laser melting of Invar 36: Microstructure and properties,
Acta Materialia, 103, pp.382-395, ISSN: 1359-6454. DOI:
10.1016/j.actamat.2015.10.020.
Sophie, C, Hany, H, Parastoo, J, Moataz, A, Duncan, S, Owen, A, Liam, G (2016)
Making the most of additive layer manufacture - development of tailored titanium implants with embedded therapeutics,
Frontiers in Bioengineering and Biotechnology, 4, DOI:
10.3389/conf.fbioe.2016.01.02017.
Qiu, C, Adkins, NJE, Hassanin, H,
Attallah, MM, Essa, K (2015)
In-situ shelling via selective laser melting: Modelling and microstructural characterisation,
Materials & Design, 87, pp.845-853, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2015.08.091.
Liu, G,
Attallah, MM, Loretto, M, Herny, E, Jiang, Y, Button, TW (2015)
Gel casting of sialon ceramics based on water soluble epoxy resin,
Ceramics International, 41(9), pp.11534-11538, ISSN: 0272-8842. DOI:
10.1016/j.ceramint.2015.05.081.
Schroeder, F, Ward, RM, Turner, RP, Walpole, AR,
Attallah, MM, Gebelin, J-C, Reed, RC (2015)
Validation of a Model of Linear Friction Welding of Ti6Al4V by Considering Welds of Different Sizes,
Metallurgical and Materials Transactions B, 46(5), pp.2326-2331, ISSN: 1073-5615. DOI:
10.1007/s11663-015-0396-9.
Qiu, C, Ravi, GA,
Attallah, MM (2015)
Microstructural control during direct laser deposition of a β-titanium alloy,
Materials & Design, 81, pp.21-30, ISSN: 0261-3069. DOI:
10.1016/j.matdes.2015.05.031.
Qiu, C, Panwisawas, C, Ward, M, Basoalto, HC, Brooks, JW,
Attallah, MM (2015)
On the role of melt flow into the surface structure and porosity development during selective laser melting,
Acta Materialia, 96, pp.72-79, ISSN: 1359-6454. DOI:
10.1016/j.actamat.2015.06.004.
Panwisawas, C, Qiu, CL, Sovani, Y, Brooks, JW,
Attallah, MM, Basoalto, HC (2015)
On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting,
Scripta Materialia, 105, pp.14-17, ISSN: 1359-6462. DOI:
10.1016/j.scriptamat.2015.04.016.
Carter, LN, Essa, K,
Attallah, MM (2015)
Optimisation of selective laser melting for a high temperature Ni-superalloy,
Rapid Prototyping Journal, 21(4), pp.423-432, ISSN: 1355-2546. DOI:
10.1108/rpj-06-2013-0063.
Qiu, C, Yue, S, Adkins, NJE, Ward, M, Hassanin, H, Lee, PD, Withers, PJ,
Attallah, MM (2015)
Corrigendum to ‘‘Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting’’ [Mater. Sci. Eng. A 628(2015)188–197],
Materials Science and Engineering: A, 638, pp.228-231, ISSN: 0921-5093. DOI:
10.1016/j.msea.2015.04.074.
Qiu, C, Ravi, GA, Dance, C, Ranson, A, Dilworth, S,
Attallah, MM (2015)
Fabrication of large Ti–6Al–4V structures by direct laser deposition,
Journal of Alloys and Compounds, 629, pp.351-361, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2014.12.234.
Qiu, C, Yue, S, Adkins, NJE, Ward, M, Hassanin, H, Lee, PD, Withers, PJ,
Attallah, MM (2015)
Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting,
Materials Science and Engineering: A, 628, pp.188-197, ISSN: 0921-5093. DOI:
10.1016/j.msea.2015.01.031.
Schröder, F, Ward, RM, Walpole, AR, Turner, RP,
Attallah, MM, Gebelin, J-C, Reed, RC (2015)
Linear friction welding of Ti6Al4V: Experiments and modelling,
Materials Science and Technology, 31(3), pp.372-384, ISSN: 0267-0836. DOI:
10.1179/1743284714y.0000000575.
Read, N, Wang, W, Essa, K,
Attallah, MM (2015)
Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development,
Materials & Design (1980-2015), 65, pp.417-424, ISSN: 0261-3069. DOI:
10.1016/j.matdes.2014.09.044.
Carter, LN, Martin, C, Withers, PJ,
Attallah, MM (2014)
The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy,
Journal of Alloys and Compounds, 615, pp.338-347, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2014.06.172.
Liu, G,
Attallah, MM, Jiang, Y, Button, TW (2014)
Rheological characterization and shape control in gel-casting of nano-sized zirconia powders,
Ceramics International, 40(9), pp.14405-14412, ISSN: 0272-8842. DOI:
10.1016/j.ceramint.2014.06.036.
Eldesouky, A, Johnsson, M, Svengren, H,
Attallah, MM, Salem, HG (2014)
Effect of grain size reduction of AA2124 aluminum alloy powder compacted by spark plasma sintering,
Journal of Alloys and Compounds, 609, pp.215-221, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2014.04.136.
Parimi, LL, A, RG, Clark, D,
Attallah, MM (2014)
Microstructural and texture development in direct laser fabricated IN718,
Materials Characterization, 89, pp.102-111, ISSN: 1044-5803. DOI:
10.1016/j.matchar.2013.12.012.
Attallah, MM, Strangwood, M, Davis, CL (2014)
Stereological Analysis of the Microstructural Inhomogeneities in Direct-Chill Cast and Continuous-Cast Aluminium-Magnesium Alloy (AA5754),
Practical Metallography, 51(2), pp.77-94, ISSN: 0032-678X. DOI:
10.3139/147.110258.
Bennett, CJ,
Attallah, MM, Preuss, M, Shipway, PH, Hyde, TH, Bray, S (2013)
Finite Element Modeling of the Inertia Friction Welding of Dissimilar High-Strength Steels,
Metallurgical and Materials Transactions A, 44(11), pp.5054-5064, ISSN: 1073-5623. DOI:
10.1007/s11661-013-1852-2.
Haenschke, T, Davis, CL,
Attallah, MM (2013)
Influence of the microstructural inhomogeneities on the martensite-to-austenite phase transformation temperatures in TiNiCu-based shape-memory alloys,
Materials Chemistry and Physics, 141(1), pp.272-277, ISSN: 0254-0584. DOI:
10.1016/j.matchemphys.2013.05.010.
Qiu, C, Adkins, NJE,
Attallah, MM (2013)
Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V,
Materials Science and Engineering: A, 578, pp.230-239, ISSN: 0921-5093. DOI:
10.1016/j.msea.2013.04.099.
Ravi, GA, Hao, XJ, Wain, N, Wu, X,
Attallah, MM (2013)
Direct laser fabrication of three dimensional components using SC420 stainless steel,
Materials & Design, 47, pp.731-736, ISSN: 0261-3069. DOI:
10.1016/j.matdes.2012.12.062.
Qiu, CL,
Attallah, MM, Wu, XH, Andrews, P (2013)
Influence of hot isostatic pressing temperature on microstructure and tensile properties of a nickel-based superalloy powder,
Materials Science and Engineering: A, 564, pp.176-185, ISSN: 0921-5093. DOI:
10.1016/j.msea.2012.11.084.
Attallah, MM, Preuss, M, Boonchareon, C, Steuwer, A, Daniels, JE, Hughes, DJ, Dungey, C, Baxter, GJ (2012)
Microstructural and Residual Stress Development due to Inertia Friction Welding in Ti-6246,
Metallurgical and Materials Transactions A, 43(9), pp.3149-3161, ISSN: 1073-5623. DOI:
10.1007/s11661-012-1116-6.
Guo, Y, Chiu, Y,
Attallah, MM, Li, H, Bray, S, Bowen, P (2012)
Characterization of Dissimilar Linear Friction Welds of α-β Titanium Alloys,
Journal of Materials Engineering and Performance, 21(5), pp.770-776, ISSN: 1059-9495. DOI:
10.1007/s11665-012-0129-z.
Loretto, MH, Wu, Z, Chu, MQ, Saage, H, Hu, D,
Attallah, MM (2012)
Deformation of microstructurally refined cast Ti46Al8Nb and Ti46Al8Ta,
Intermetallics, 23, pp.1-11, ISSN: 0966-9795. DOI:
10.1016/j.intermet.2011.12.012.
Attallah, MM, Terasaki, H, Moat, RJ, Bray, SE, Komizo, Y, Preuss, M (2011)
In-Situ observation of primary γ′ melting in Ni-base superalloy using confocal laser scanning microscopy,
Materials Characterization, 62(8), pp.760-767, ISSN: 1044-5803. DOI:
10.1016/j.matchar.2011.05.001.
Cernik, RJ, Hansson, CCT, Martin, CM, Preuss, M,
Attallah, M, Korsunsky, AM, Belnoue, JP, Jun, TS, Barnes, P, Jacques, S, Sochi, T, Lazzari, O (2011)
A synchrotron tomographic energy-dispersive diffraction imaging study of the aerospace alloy Ti 6246,
Journal of Applied Crystallography, 44(1), pp.150-157, ISSN: 0021-8898. DOI:
10.1107/s0021889810050077.
Attallah, MM, Strangwood, M, Davis, CL (2010)
Influence of the heating rate on the initiation of primary recrystallization in a deformed Al–Mg alloy,
Scripta Materialia, 63(4), pp.371-374, ISSN: 1359-6462. DOI:
10.1016/j.scriptamat.2010.04.016.
Attallah, MM, Zabeen, S, Cernik, RJ, Preuss, M (2009)
Comparative determination of the α/β phase fraction in α+β-titanium alloys using X-ray diffraction and electron microscopy,
Materials Characterization, 60(11), pp.1248-1256, ISSN: 1044-5803. DOI:
10.1016/j.matchar.2009.05.006.
Romero, J,
Attallah, MM, Preuss, M, Karadge, M, Bray, SE (2009)
Effect of the forging pressure on the microstructure and residual stress development in Ti–6Al–4V linear friction welds,
Acta Materialia, 57(18), pp.5582-5592, ISSN: 1359-6454. DOI:
10.1016/j.actamat.2009.07.055.
Attallah, MM, Davis, CL, Strangwood, M (2007)
Microstructure-microhardness relationships in friction stir welded AA5251,
Journal of Materials Science, 42(17), pp.7299-7306, ISSN: 0022-2461. DOI:
10.1007/s10853-007-1585-y.
Attallah, MM, Davis, CL, Strangwood, M (2007)
Influence of base metal microstructure on microstructural development in aluminium based alloy friction stir welds,
Science and Technology of Welding and Joining, 12(4), pp.361-369, ISSN: 1362-1718. DOI:
10.1179/174329307x164238.
Attallah, MM and Salem, HG (2005)
Friction stir welding parameters: a tool for controlling abnormal grain growth during subsequent heat treatment,
Materials Science and Engineering: A, 391(1-2), pp.51-59, ISSN: 0921-5093. DOI:
10.1016/j.msea.2004.08.059.
Attallah, MM and Salem, HG (2004)
Influence of process parameters on superplasticity of friction stir processed nugget in high strength Al – Cu – Li alloy,
Materials Science and Technology, 20(11), pp.1370-1376, ISSN: 0267-0836. DOI:
10.1179/026708304x3962.
Conferences
Mostaani, A, Skaik, T, Mohamed, AE-MA,
Attallah, MM, Booth, P, Miquel-España, C, Wang, Y (2023)
A 3D-Printed Monolithic Inline Filter Fabricated With Titanium Alloy. In
2023 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference (IMOC), pp.58-60, DOI:
10.1109/imoc57131.2023.10379785.
Qian, L, Martinez, R, Salek, M,
Attallah, M, Wang, Y, Lancaster, MJ (2022)
Compact Monolithic SLM 3D-Printed Filters using Pole-Generating Resonant Irises. In
2021 51st European Microwave Conference (EuMC), pp.118-121, DOI:
10.23919/eumc50147.2022.9784337.
Qian, L, Li, S,
Attallah, M, Skaik, T, Booth, P, Pambaguian, L, Espana, CM, Martin-Iglesias, P, Wang, Y (2022)
Thermal Stability Analysis of 3D Printed Resonators Using Novel Materials. In
2021 51st European Microwave Conference (EuMC), pp.334-337, DOI:
10.23919/eumc50147.2022.9784368.
Abdulsalam, M, Feng, J, Garrard, R,
Attallah, MM, Serracino-Inglott, F, Zhao, L (2022)
In vitro study of the deployment performance of 3D printed stents in the diseased artery with the lipid arterial plaques. In
, Procedia Structural Integrity, pp.608-613, DOI:
10.1016/j.prostr.2022.12.077.
Mostaani, A, Qian, L, Martinez, R, Wilson, PF,
Attallah, M, Wang, Y, Williams, MA (2021)
Investigation of a 3D-Printed Narrowband Filter with Non-Resonating Nodes. In
2021 IEEE MTT-S International Microwave Filter Workshop (IMFW), pp.316-318, DOI:
10.1109/imfw49589.2021.9642309.
Ginestra, P, Riva, L, Ceretti, E, Lobo, D, Mountcastle, S, Villapun, V, Cox, S, Grover, L,
Attallah, M, Addison, O, Shepherd, D, Webber, M (2021)
Surface finish of Additively Manufactured Metals: biofilm formation and cellular attachment. In
, ESAFORM 2021. DOI:
10.25518/esaform21.2089.
Crocco, B, Imbrogno, S, Tamimi, S,
Attallah, M, Butler, D (2021) Optimization of Selective Laser Melting process for zirconium lattices as orthopaedic implants. In
, Euro Pm2021 Congress Proceedings.
Koelblin, J, Hastie, JC, Kartal, ME, Siddiq, A,
Attallah, MM (2021)
Deformation of AlSi10Mg parts manufactured by Laser Powder Bed Fusion: In-situ measurements incorporating X-ray micro computed tomography and a micro testing stage. In
, Procedia Structural Integrity, pp.168-172, DOI:
10.1016/j.prostr.2021.12.061.
Freer, S, Martinez, R, Perez-Quintana, D, Beruete, M, Hanham, SM,
Attallah, MM, Navarro-Cia, M (2020)
Metal 3D Printed D-Band Waveguide to Surface Wave Transition. In
2020 45th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz), 2020 45th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), pp.1-2, DOI:
10.1109/irmmw-thz46771.2020.9370639.
Cortes, J, Aristizabal, M,
Attallah, MM, Iturriza, I (2020) Effect of hip cooling rate and post-hip heat treatments on IN718 microstructure and mechanical properties. In
, Euro Pm 2018 Congress and Exhibition.
Careri, F, Imbrogno, S,
Attallah, MM, Essa, K, Umbrello, D (2020)
Finite Element Modeling of Machining Nickel Superalloy Produced By Direct Energy Deposition Process. In
, Procedia Manufacturing, pp.525-529, DOI:
10.1016/j.promfg.2020.04.120.
Khan, RHU, Sergi, A,
Attallah, MM (2020) Hot Isostatic Pressing of IN625: Effect of Powder Production Type on Microstructure and Mechanical Properties. In
, Proceedings Euro Pm2020 Congress and Exhibition.
Ginestra, P, Ceretti, E, Lobo, D, Lowther, M, Cruchley, S, Kuehne, S, Villapun, V, Cox, S, Grover, L, Shepherd, D,
Attallah, M, Addison, O, Webber, M (2020)
Post Processing of 3D Printed Metal Scaffolds: a Preliminary Study of Antimicrobial Efficiency. In
, Procedia Manufacturing, pp.1106-1112, DOI:
10.1016/j.promfg.2020.04.126.
Guo, C, Li, J, Yu, Y, Zhang, F, Li, S,
Attallah, MM, Shang, X, Zhang, A, Wang, Y, Lancaster, MJ (2019)
Shaping and Slotting High-Q Spherical Resonators for Suppression of Higher Order Modes. In
2019 IEEE/MTT-S International Microwave Symposium - IMS 2019, 2019 IEEE MTT-S International Microwave Symposium (IMS), pp.1205-1208, DOI:
10.1109/mwsym.2019.8700752.
Kendall, J, Serracino-Inglott, F, Banks, C, Jamshidi, P,
Attallah, M, Feng, J (2019)
In-vitro Study of Effect of the Design of the Stent on the Arterial Waveforms. In
, Procedia Structural Integrity, pp.33-40, DOI:
10.1016/j.prostr.2019.07.007.
Anis, G,
Attallah, M, Salem, H, Youssef, M (2019)
Phase Diagram and Mechanical Properties of a CoCrFeNi1??Ti? High Entropy Alloy Fabricated by Mechanical Alloying. In
MS&T19, Contributed Papers from MS&T19, pp.1202-1207, DOI:
10.7449/2019/mst_2019_1202_1207.
Kampouridou, D, Churm, J, Denyer, C,
Attallah, M, Lancaster, M, Feresidis, A (2019)
Design of a Metal 3-D Printed Corrugated Antenna. In
Antennas and Propagation Conference 2019 (APC-2019), pp.3 pp.-3 pp, DOI:
10.1049/cp.2019.0722.
Salem, H,
Attallah, M, Carter, L, Salem, H (2018)
The Influence of Processing Parameters on Strut Diameter and Internal Porosity in Ti6Al4V Cellular Structure. In
MS&T18, Contributed Papers from MS&T17, pp.71-77, DOI:
10.7449/2018/mst_2018_71_77.
Salem, H, Salem, HG,
Attallah, MM (2017)
Composite Powder Consolidation Using Selective Laser Melting: Input Energy/Porosity Morphology/Balling Effect Relation. In
, pp.169-180, ISBN: 9783319514925. DOI:
10.1007/978-3-319-51493-2_17.
Wang, X, Read, N, Carter, LN, Ward, RM,
Attallah, MM (2016)
Defect formation and its mitigation in selective laser melting of high γ′ Ni-base superalloys. In
, Proceedings of the International Symposium on Superalloys, pp.351-358, DOI:
10.1002/9781119075646.ch38.
Aristizabal, M, Cortes, J, Loretto, MH,
Attallah, MM, Iturriza, I (2016) Effect of HIP temperature and post-HIP heat treatments on coincidence site lattices and twin boundaries in IN718. In
, World Pm 2016 Congress and Exhibition.
Sun, W, Brown, S, Woolliams, P, McCarthy, M, White, J,
Attallah, M (2016) Applications and systematic errors of X-ray computed tomography associated with dimensional metrology. In
, 55th Annual Conference of the British Institute of Non Destructive Testing NDT 2016, pp.337-345.
MacDonald, JE, Aristizabal, M, Lunt, MJ,
Attallah, MM (2015) Influence of heat treatment on the microstructure and tensile properties of HIPped CM247LC. In
, Advances in Powder Metallurgy and Particulate Materials Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials Powdermet 2015.
Aristizabal, M, Cortes, J, Loretto, MH,
Attallah, MM, Iturriza, I, Khan, RHU (2015) Study of the influence of outgassing parameters, powder particle size and HIP temperature in the mechanical properties of IN718. In
, Proceedings Euro Pm 2015 International Power Metallurgy Congress and Exhibition.
Li, S, Liu, S, Adkins, NJE,
Attallah, MM (2014)
Analysis of Microstructural Inhomogeneities of Ti‐Based Alloys Produced via Laser‐Based Combinatorial Synthesis. In
, pp.65-71, ISBN: 9781118889725. DOI:
10.1002/9781118889879.ch9.
White, JP, Read, N, Ward, RM, Mellor, R,
Attallah, MM (2014) Prediction of melt pool profiles for selective laser melting of AlSi10Mg alloy. In
, Materials Science and Technology Conference and Exhibition 2014 MS and T 2014, pp.1985-1992.
Schroeder, F, Ward, RM, Turner, RP,
Attallah, MM, Gebelin, JC, Reed, RC, Walpole, AR (2013) Linear friction welding of titanium alloys for aeroengine applications: Modelling and validation. In
, ASM Proceedings of the International Conference Trends in Welding Research, pp.886-892.
Konaraddi, V, Jarvis, T, Clark, D,
Attallah, MM (2012) Effect of interface surface profile on the microstructure and tensile properties of hot isostatically diffusion bonded Ti-6Al-4V. In
, Advances in Powder Metallurgy and Particulate Materials 2012 Proceedings of the 2012 International Conference on Powder Metallurgy and Particulate Materials Powdermet 2012, pp.388-3101.
Guo, Y, Chiu, Y, Li, H,
Attallah, MM, Bray, S, Bowen, P (2012) Microstructure and microtexture of linear friction welded Ti-6Al-4V. In
, Ti 2011 Proceedings of the 12th World Conference on Titanium, pp.1995-1999.
Carter, LN,
Attallah, MM, Reed, RC (2012)
Laser Powder Bed Fabrication of Nickel‐Base Superalloys: Influence of Parameters; Characterisation, Quantification and Mitigation of Cracking. In
, pp.577-586, ISBN: 9780470943205. DOI:
10.1002/9781118516430.ch64.
Parimi, LL,
Attallah, MM, Gebelin, JC, Reed, RC (2012)
Direct laser fabrication of inconel-718: Effects on distortion and microstructure. In
, Proceedings of the International Symposium on Superalloys, pp.511-519, DOI:
10.7449/2012/superalloys_2012_511_519.
Attallah, MM, Davis, CL, Strangwood, M (2009)
Microstructure-property development in friction stir welds of Al-Mg alloys. In
, ASM Proceedings of the International Conference Trends in Welding Research, pp.358-363, DOI:
10.1361/cp2008twr358.
Attallah, MM, Preuss, M, Bray, S (2009)
Microstructural development during Linear Friction Welding of titanium alloys. In
, ASM Proceedings of the International Conference Trends in Welding Research, pp.486-491, DOI:
10.1361/cp2008twr486.
Attallah, MM, Preuss, M, Withers, PJ, Bray, S (2009)
Influence of Linear Friction Welding parameters on the residual stress development in Ti-6246. In
, ASM Proceedings of the International Conference Trends in Welding Research, pp.751-757, DOI:
10.1361/cp2008twr751.
Salem, HG, Sadek, A,
Attallah, MM (2009) Nanocrystalline powder consolidation in AA2124 using uniaxial compaction and severe plastic deformation. In
, TMS Annual Meeting, pp.495-502.
Attallah, MM, Davis, CL, Strangwood, M (2005) Microstructural development during friction stir welding of work hardenable Al-Mg alloys. In
, Proceedings of an International Conference on Solid Solid Phase Transformations in Inorganic Materials 2005, pp.849-854.
