Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Research Publications


Publications for Robert Young

From (year): To (year):

Download all publications as Word document


Journal Articles

Tsalapati, E, Tribe, J, Goodall, P, Young, RIM, Jackson, T, West, A (2021) Enhancing RFID system configuration through semantic modelling, The Knowledge Engineering Review, 36, e11, ISSN: 0269-8889. DOI: 10.1017/S0269888921000096.

Pease, S, Sharpe, R, Van-Lopik, K, Tsalapati, E, Goodall, P, Young, RIM, Conway, P, West, A (2020) An interoperable semantic service toolset with domain ontology for automated decision support in the end-of-life domain, Future Generation Computer Systems, 112, pp.848-858, ISSN: 0167-739X. DOI: 10.1016/j.future.2020.06.008.

Sanfilippo, EM, Kitamura, Y, Young, RIM (2019) Formal ontologies in manufacturing, Applied Ontology, 14(2), pp.119-125, ISSN: 1570-5838. DOI: 10.3233/ao-190209.

Palmer, C, Usman, Z, Canciglieri Junior, O, Malucelli, A, Young, RIM (Accepted for publication) Interoperable manufacturing knowledge systems, International Journal of Production Research, pp.1-20, ISSN: 0020-7543. DOI: 10.1080/00207543.2017.1391416.

Palmer, C, Urwin, EN, Niknejad, A, Petrovic, D, Popplewell, K, Young, RIM (2017) An ontology supported risk assessment approach for the intelligent configuration of supply networks, Journal of Intelligent Manufacturing, ISSN: 0956-5515. DOI: 10.1007/s10845-016-1252-8.

Palmer, C, Urwin, EN, Young, RIM, Marilungo, E (2017) A reference ontology approach to support global product-service production, International Journal of Product Lifecycle Management, ISSN: 1743-5129. DOI: 10.1504/IJPLM.2017.083003.

Young, RIM, Palmer, C, Urwin, EN, Pinazo-Sanchez, JM, Sanchez Cid, F, Rodriguez, ER, Pajkovska-Goceva, S (2016) Reference ontologies to support the development of global production network systems, Computers in Industry, 77, pp.48-60, ISSN: 1872-6194. DOI: 10.1016/j.compind.2015.11.002.

Imran, M and Young, B (2015) The application of common logic based formal ontologies to assembly knowledge sharing, Journal of Intelligent Manufacturing, 26(1), pp.139-158, ISSN: 0956-5515. DOI: 10.1007/s10845-013-0768-4.

Imran, M and Young, RIM (2015) Reference ontologies for interoperability across multiple assembly systems, International Journal of Production Research, ISSN: 1366-588X. DOI: 10.1080/00207543.2015.1087654.

Okumura, MLM, Canciglieri, O, de Souza, TM, Young, RIM (2014) Integration Definition Methods to Support Product Design for Assistive Technology, Advanced Materials Research, 945-949, pp.434-437, DOI: 10.4028/www.scientific.net/amr.945-949.434.

Nerone, MA, Canciglieri, O, Arns Steiner, MT, Young, RIM (2014) Mapping the Open Innovation Ecosystem: An Analysis of the Technical and Strategic Level, Advanced Materials Research, 945-949, pp.450-460, DOI: 10.4028/www.scientific.net/amr.945-949.450.

Chungoora, N, Young, RI, Gunendran, G, Palmer, C, Usman, Z, Anjum, NA, Cutting-Decelle, AF, Harding, JA, Case, K (2013) A model-driven ontology approach for manufacturing system interoperability and knowledge sharing, Computers in Industry, 64(4), pp.392-401, ISSN: 0166-3615. DOI: 10.1016/j.compind.2013.01.003.

Chungoora, N, Cutting-Decelle, A-F, Young, RIM, Gunendran, G, Usman, Z, Harding, JA, Case, K (2013) Towards the ontology-based consolidation of production-centric standards, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 51(2), pp.327-345, ISSN: 0020-7543. DOI: 10.1080/00207543.2011.627885.

Palmer, C, Chungoora, N, Young, RIM, Gunendran, AG, Usman, Z, Case, K, Harding, JA (2013) Exploiting unified modelling language (UML) as a preliminary design tool for Common Logic-based ontologies in manufacturing, International Journal of Computer Integrated Manufacturing, 26(3), pp.267-283, ISSN: 0951-192X. DOI: 10.1080/0951192X.2012.688142.

Imran, M and Young, B (Accepted for publication) The application of common logic based formal ontologies to assembly knowledge sharing, Journal of Intelligent Manufacturing, pp.1-20, ISSN: 0956-5515. DOI: 10.1007/s10845-013-0768-4.

Anjum, N, Harding, J, Young, R, Case, K, Usman, Z, Changoora, T (2013) Verification of knowledge shared across design and manufacture using a foundation ontology, International Journal of Production Research, ISSN: 0020-7543. DOI: 10.1080/00207543.2013.798051.

Usman, Z, Young, RIM, Chungoora, N, Palmer, C, Case, K, Harding, JA (2013) Towards a formal manufacturing reference ontology, International Journal of Production Research, ISSN: 0020-7543. DOI: 10.1080/00207543.2013.801570.

Urwin, EN and Young, RIM (2013) The reuse of machining knowledge to improve designer awareness through the configuration of knowledge libraries in PLM, International Journal of Production Research, ISSN: 0020-7543. DOI: 10.1080/00207543.2013.839894.

Chungoora, N, Gunendran, GA, Young, RIM, Usman, Z, Anjum, NA, Palmer, C, Harding, JA, Case, K, Cutting-Decelle, A-F (2012) Extending product lifecycle management for manufacturing knowledge sharing, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 226(A12), pp.2047-2063, ISSN: 0954-4054. DOI: 10.1177/0954405412461741.

Cutting-Decelle, AF, Barraud, JL, Veenendaal, B, Young, RI (2012) Production information interoperability over the Internet: A standardised data acquisition tool developed for industrial enterprises, Computers in Industry, 63(8), pp.824-834, ISSN: 0166-3615. DOI: 10.1016/j.compind.2012.08.010.

Swarnkar, R, Choudhary, AK, Harding, JA, Das, BP, Young, RI (2012) A framework for collaboration moderator services to support knowledge based collaboration, Journal of Intelligent Manufacturing, 23(5), pp.2003-2023, ISSN: 0956-5515. DOI: 10.1007/s10845-011-0528-2.

Anjum, NA, Harding, JA, Young, RI, Case, K (2012) Mediation of foundation ontology based knowledge sources, Computers in Industry, 63(5), pp.433-442, ISSN: 0166-3615. DOI: 10.1016/j.compind.2012.01.009.

Anjum, N, Harding, JA, Young, RIM, Case, K (2012) Manufacturability verification through feature-based ontological product models, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 226(B6), pp.1086-1098, ISSN: 0954-4054. DOI: 10.1177/0954405412437125.

Costa, CA, Luciano, MA, Lima, CP, Young, RIM (2012) Assessment of a Product Range Model concept to support design reuse using rule based systems and case based reasoning, Advanced Engineering Informatics, 26(2), pp.292-305, ISSN: 1474-0346. DOI: 10.1016/j.aei.2011.11.001.

Costa, CA, Luciano, MA, Lima, CP, Young, RIM (2012) Assessment of a Product Range Model concept to support design reuse using rule based systems and case based reasoning, Advanced Engineering Informatics, ISSN: 1474-0346.

Anjum, NA, Harding, JA, Young, RI, Case, K (2012) Mediation of foundation ontology based knowledge sources, Computers in Industry, ISSN: 0166-3615.

Cutting-Decelle, AF, Barraud, JL, Veenendaal, B, Young, RI (2012) Production information interoperability over the Internet: A standardised data acquisition tool developed for industrial enterprises, Computers in Industry, ISSN: 0166-3615.

Liu, S, Young, RIM, Ding, L (2011) An integrated decision support system for global manufacturing co-ordination in the automotive industry, INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 24(4), pp.285-301, ISSN: 0951-192X. DOI: 10.1080/0951192X.2011.554869.

Chungoora, N and Young, RIM (2011) The configuration of design and manufacture knowledge models from a heavyweight ontological foundation, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 49(15), pp.4701-4725, ISSN: 0020-7543. DOI: 10.1080/00207543.2010.504754.

Palmer, C, Harding, JA, Swarnkar, R, Das, BP, Young, RIM (2011) Generating rules from data mining for collaboration moderator services, Journal of Intelligent Manufacturing, pp.1-18, ISSN: 0956-5515. DOI: 10.1007/s10845-011-0589-2.

Swarnkar, R, Choudhary, AK, Harding, JA, Das, BP, Young, RI (2011) A framework for collaboration moderator services to support knowledge based collaboration, Journal of Intelligent Manufacturing, pp.1-21, ISSN: 0956-5515.

Chungoora, N, Canciglieri, OJ, Young, RIM (2010) Towards expressive ontology-based approaches to manufacturing knowledge representation and sharing, International Journal of Computer Integrated Manufacturing, 23(12), pp.1059-1070, DOI: 10.1080/0951192X.2010.518976.

Canciglieri, OJ and Young, RIM (2010) Information mapping across injection moulding design and manufacture domains, International Journal of Production Research, 48(15), pp.4437-4462, ISSN: 1366-588X. DOI: 10.1080/00207540902824974.

Gunendran, G and Young, RIM (2010) Methods for the Capture of Manufacture Best Practice in Product Lifecycle Management, International Journal of Production Research, 48(20), pp.5885-5904, ISSN: 1366-588X. DOI: 10.1080/00207540903104210.

Cochrane, SD, Young, RIM, Case, K, Harding, JA, Gao, J, Dani, S, Baxter, D (2009) Manufacturing knowledge verification in design support systems, International Journal of Production Research, 47(12), pp.3179-3204, ISSN: 1366-588X. DOI: 10.1080/00207540701802452.

Cochrane, SD, Young, RI, Case, K, Harding, JA, Gao, J, Dani, S, Baxter, D (2008) Knowledge reuse in manufacturability analysis, International Journal of Robotics and Computer-Integrated Manufacturing, 24(4), pp.508-513, ISSN: 0736-5845. DOI: 10.1016/j.rcim.2007.07.003.

Baxter, DI, Gao, JX, Case, K, Harding, JA, Young, RI, Cochrane, SD, Dani, S (2008) A framework to integrate design knowledge reuse and requirements management in engineering design, International Journal of Robotics and Computer-Integrated Manufacturing, 24(4), pp.585-593, ISSN: 0736-5845. DOI: 10.1016/j.rcim.2007.07.010.

Guerra Zubiaga, D and Young, RIM (2008) Design of a Manufacturing Knowledge Model, International Journal of Computer Integrated Manufacturing, 21(5), pp.526-539, ISSN: 0951-192X.

Baxter, D, Gao, J, Case, K, Harding, JA, Young, RI, Cochrane, SD, Dani, S (2007) An engineering design knowledge reuse methodology using process modelling, International Journal of Research in Engineering Design, 18(1), pp.37-48, ISSN: 0934-9839. DOI: 10.1007/s00163-007-0028-8.

Young, RI, Gunendran, AG, Cutting Decelle, AF, Gruninger, M (2007) Manufacturing knowledge sharing in PLM: a progression towards the use of heavy weight ontologies, International Journal of Production Research, 45(7), pp.1505-1519, ISSN: 1366-588X. DOI: 10.1080/00207540600942268.

Cutting Decelle, AF, Das, BP, Young, RI, Case, K, Rahimifard, S, Anumba, CJ, Bouchlaghem, NM (2007) A review of approaches to supply chain communications: from manufacturing to construction, International Journal of IT in Construction, 12, pp.73-102, ISSN: 1874-4753.

Das, BP, Cutting Decelle, AF, Young, RI, Case, K, Rahimifard, S, Anumba, CJ, Bouchlaghem, NM (2007) Towards the understanding of the requirements for a communication language to support interoperation in cross disciplinary supply chains, International Journal of Computer Integrated Manufacturing, 20(4), pp.396-410, ISSN: 0951-192X. DOI: 10.1080/09511920600873741.

Cutting Decelle, AF, Young, RI, Michel, JJ, Grangel, R, Le Cardinal, J, Bourey, JP (2007) ISO 15531 MANDATE: A Product-process-resource based Approach for Managing Modularity in Production Management, Concurrent Engineering Research and Applications, 15(2), pp.217-235, DOI: 10.1177/1063293X07079329.

Liu, S and Young, RI (2007) An Exploration of Key Information Models and their Relationships in Global Manufacturing Decision Support, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221(4), pp.711-724, ISSN: 0954-4054. DOI: 10.1243/09544054JEM531.

Guerra Zubiaga, D and Young, RIM (2007) Information and Knowledge Interrelationships in a Manufacturing Model, International Journal of Advanced Manufacturing Technology, ISSN: 1433-3015. DOI: 10.1007/s00170-007-1194-6.

Gunendran, AG and Young, RI (2006) An information and knowledge framework for multi-perspective design and manufacture, International Journal of Computer Integrated Manufacture, 19(4), pp.326-338, ISSN: 0951-192X. DOI: 10.1080/09511920500399508.

Dani, S, Harding, JA, Case, K, Young, RI, Gao, J, Cochrane, SD, Baxter, D (2006) A methodology for best practice knowledge management, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220(B10), pp.1717-1728, ISSN: 0954-4054. DOI: 10.1243/09544054JEM651.

Cutting Decelle, AF, Das, BP, Young, RI, Case, K, Rahimifard, S, Anumba, CJ, Bouchlaghem, NM (2006) Building supply chain communication systems: a review of methods and techniques, The Data Science Journal, 5, pp.29-51, ISSN: 1683-1470. DOI: 10.2481/dsj.5.29.

Costa, CA and Young, RI (2006) Interaction Elements: utilising knowledge to provide high quality information in a decision support system, International Journal of Advanced Manufacturing Systems, 9(1), pp.1-11, ISSN: 1536-2647.

Guerra Zubiaga, DA and Young, RI (2006) A Manufacturing Model to Enable Knowledge Maintenance in Decision Support Systems, Journal of Manufacturing Systems, 25(2), pp.122-136, ISSN: 0278-6125.

Cutting-Decelle, AF, Das, BP, Young, RI, Case, K, Bouchlaghem, NM, Anumba, CJ (2006) Information exchanges in a cross-disciplinary supply chain: Formal strategy and application, IFAC Proceedings Volumes (IFAC-PapersOnline), 12(PART 1), ISSN: 1474-6670. DOI: 10.3182/20060517-3-fr-2903.00307.

Liu, S and Young, RI (2004) Utilising information/knowledge models to support global manufacturing coordination decisions, International Journal of Computer Integrated Manufacture, 17(6), pp.479-492, ISSN: 0951-192X.

Young, RI (2003) Informing Decision-Makers in Product Design and Manufacture, International Journal of Computer Integrated Manufacture, 16(6), pp.428-438, ISSN: 1362-3052. DOI: 10.1080/0951192031000080876.

Cutting Decelle, AF, Young, RI, Anumba, CJ, Baldwin, AN, Bouchlaghem, NM (2003) The Application of PSL to Product Design across Construction and Manufacturing, Concurrent Engineering: Research and Applications (CERA), 11(1), pp.65-75, ISSN: 1063-293X.

Canciglieri, OJ and Young, RI (2003) Information Sharing in Multiviewpoint Injection Moulding Design and Manufacture, International Journal of Production Research, 45(7), pp.1565-1586, ISSN: 0020-7543.

Wang, S, Jian, Y, Liu, F, Young, R (2003) Novel structure for distributed numerical control, Chinese Journal of Mechanical Engineering (English Edition), 16(4), pp.437-440, ISSN: 1000-9345. DOI: 10.3901/cjme.2003.04.437.

Costa, CA and Young, RI (2001) Product Range Models Supporting Design Knowledge Reuse, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215(3), pp.323-337, ISSN: 0954-4054. DOI: 10.1243/0954405011515406.

Costa, CA, Harding, JA, Young, RI (2001) The Application of UML and an Open Distributed Process Framework to Information System Design, Computers in Industry, 46(1), pp.33-48, ISSN: 0166-3615.

Dorador, JM and Young, RIM (2000) Application of IDEF0, IDEF3 and UML methodologies in the creation of information models, INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 13(5), pp.430-445, ISSN: 0951-192X. DOI: 10.1080/09511920050117928.

Dorador, JM and Young, RI (2000) The Application of IDEF0, IDEF3 and UML Methodologies in the Creation of Information Models, International Journal of Computer Integrated Manufacture, 13(5), pp.430-445, ISSN: 0951-192X.

Young, RI, Canciglieri Jnr, O, Costa, CA (1999) Manufacturing Information Interactions in Data Model Driven Design, Proceedings of the IMechE Part B: Journal of Engineering Manufacture, 213(B), pp.527-532, ISSN: 0954-4054.

Zhao, J, Cheung, WM, Young, RI (1999) A Consistent Manufacturing Data Model to Support Virtual Enterprises, International Journal of Agile Management Systems, 1(3), pp.150-159, ISSN: 1465-4652.

Bugtai, N and Young, RI (1998) Information Models in an Integrated Fixture Decision Support Tool, Journal of Materials Processing Technology, 76, pp.29-35, ISSN: 0924-0136.

Lee, RJV and Young, RI (1998) Information Supported Design for Manufacture of Injection-Moulded Rotational Products, International Journal of Production Research, 36(12), pp.3347-3366, ISSN: 0020-7543.

Al Ashaab, AH and Young, RI (1997) Modelling Manufacturing Process Information Using EXPRESS, Concurrent Engineering: Research and Applications (CERA), 5(1), pp.27-35, ISSN: 1063-293X.

Molina, A, Ellis, TI, Young, RI, Bell, R (1995) Modelling Manufacturing Capability to Support Concurrent Engineering, Concurrent Engineering: Research and Applications (CERA) Journal, 13(1), pp.29-42, ISSN: 1063-293X.

Molina, A, Al Ashaab, AH, Ellis, TI, Young, RI, Bell, R (1995) A Review of Computer Aided Simultaneous Engineering Systems, International Journal of Research in Engineering Design, 7, pp.38-63, ISSN: 0934-9839.

Al Ashaab, AH and Young, RI (1995) Design for Injection Moulding in a Manufacturing Model Environment, Journal of Design and Manufacturing, 5, pp.45-54, ISSN: 0962-4694.

Young, RI and Bell, R (1993) Design by Features - Advantages and Limitations in Machine Planning Integration, International Journal of Computer Integrated Manufacture, 6(1/2), pp.105-112.

YOUNG, RIM and BELL, R (1992) MACHINE PLANNING IN A PRODUCT MODEL ENVIRONMENT, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 30(11), pp.2487-2513, ISSN: 0020-7543. DOI: 10.1080/00207549208948173.

Young, RI and Bell, R (1992) Machine Planning in a Product Model Environment, International Journal of Production Research, 30(11), pp.2487-2514, ISSN: 0020-7543.

Corrigal, MS, Lee, MS, Young, RI, Bell, R (1992) Manufacturing Code Generation in a Product Model Environment, Proceedings of Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 206, pp.165-175, ISSN: 0954-4054.

Young, RI and Bell, R (1991) Fixturing Strategies and Geometric Queries in Set-Up Planning, International Journal of Production Research, 29(3), pp.537-550, ISSN: 0020-7543.

BELL, R and YOUNG, RIM (1989) MACHINE PLANNING - ITS ROLE IN THE GENERATION OF MANUFACTURING CODE FROM SOLID MODEL DESCRIPTIONS, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 27(5), pp.847-867, ISSN: 0020-7543. DOI: 10.1080/00207548908942591.

Young, RI and Bell, R (1989) Machine Planning: Its Role in the Generation of Manufacturing Code from Solid Model Descriptions, International Journal of Production Research, 27(5), pp.847-867, ISSN: 0020-7543.

Chungoora, N and Young, RIM Semantic reconciliation across design and manufacturing knowledge models: A logic-based approach, Applied Ontology, 6(4), pp.295-315, DOI: 10.3233/AO-2011-0092.



Conferences

Williamson, R, Carlin, H, Hayward, S, Goodall, P, van Lopik, K, Young, B, West, A (2022) Predicting the Unpredictable through Realism in Interoperable Digital Twins. In , CEUR Workshop Proceedings.

Carlin, H, Williamson, R, Goodall, P, Young, B, West, A (2022) Modelling Realism in Digital Twins: Issues and Solutions for Interoperable Manufacture. In , CEUR Workshop Proceedings.

Goodall, P, Van-Lopik, K, Stilo, L, Hayward, S, Tribe, J, Pease, S, Schnieder, M, West, A, Young, B (2020) An embedded intelligence future vision of flexible configurable manufacturing. In , CEUR Workshop Proceedings.

Goodall, PA, Lugo, H, Sharpe, R, van Lopik, KAJ, Pease, S, West, A, Young, RIM (2018) Exploiting embedded intelligence in manufacturing decision support. In I-ESA, Berlin.

Palmer, C, Urwin, E, Rodriguez, EP, Cid, FS, Pinazo-Sanchez, JM, Pajkovska-Goceva, S, Cutting-Decelle, A-F, Young, RIM (2015) Standardised semantic models to support the configuration of global production networks. In International IFIP Working Conference on Enterprise Interoperability, Nimes, France.

Shin, F, Colwill, J, Young, RIM (2015) Expanding the scope of LCA to include 'societal value': A framework and methodology for assessing positive product impacts. In , Univ New S Wales, Sydney, AUSTRALIA, pp.366-371, DOI: 10.1016/j.procir.2015.02.076.

Palmer, C, Urwin, E, Rodriguez, EP, Cid, FS, Pinazo-Sanchez, JM, Pajkovska-Goceva, S, Young, RIM (2015) An ontology for global production network design and reconfiguration. In 7th Workshop on Formal Ontologies meet Industry (FOMI), Berlin, Germany, pp.113-125, ISBN: 9783319215440. DOI: 10.1007/978-3-319-21545-7_10.

Chen, D, Van Sinderen, M, De Sabbata, P, Young, B, Zelm, M, Hofman, W, Ramaekers, J, Shishkov, B, Ivanov, I, Karnouskos, S, Nativi, S, Folmer, E, Gani, A, Iacob, M, Kosanke, K, Van Maanen, T (2015) International program committee. In , CEUR Workshop Proceedings.

Cuel, R and Young, R (2015) Formal ontologies meet industry: 7th international workshop, FOMI 2015 Berlin, Germany, august 5, 2015 proceedings. In , Lecture Notes in Business Information Processing,ISBN: 9783319215440.

El Kadiri, S, Terkaj, W, Urwin, EN, Palmer, C, Kiritsis, D, Young, R (2015) Ontology in Engineering Applications. In , pp.126-137, ISBN: 9783319215440. DOI: 10.1007/978-3-319-21545-7_11.

Palmer, C, Urwin, EN, Pinazo-Sánchez, JM, Cid, FS, Pajkovska-Goceva, S, Young, RIM (2014) Reference Ontologies to Support the Development of New Product-Service Lifecycle Systems. In , pp.642-649, ISBN: 9783319125671. DOI: 10.1007/978-3-662-44736-9_78.

Urwin, EN, Palmer, C, Cutting-Decelle, AF, Sánchez Cid, F, Pinazo-Sánchez, JM, Pajkovska-Goceva, S, Young, RIM (2014) Reference ontologies for Global Production Networks. In , KMIS 2014 - Proceedings of the International Conference on Knowledge Management and Information Sharing, pp.133-139, ISBN: 9789897580505. DOI: 10.5220/0005026001330139.

Young, R, Hastilow, N, Imran, M, Chungoora, N, Usman, Z, Cutting-Decelle, A-F (2013) Reference Ontologies for Manufacturing. In , ENTERPRISE INTEROPERABILITY: RESEARCH AND APPLICATIONS IN THE SERVICE-ORIENTED ECOSYSTEM, pp.143-152, ISBN: 978-1-84821-662-4.

Urwin, EN, Young, B, Frazer, L, Hunt, D (2012) Improving product performance through manufacturing knowledge reuse in PLM. In , ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012, pp.409-416, ISBN: 9780791844861. DOI: 10.1115/ESDA2012-82391.

Urwin, EN, young, RI, Frazer, L, Hunt, D (2012) Improving Design Performance through Manufacturing Knowledge Reuse in PLM. In Biennial Conference on Engineering Systems Design and Analysis (ESDA2012), Proceedings of the 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA2012), Nantes, France, pp.409-416, ISBN: 978-0-7918-4486-1.

Chungoora, N and Young, RIM (2011) An ontological approach to consolidate standards-based concepts in production engineering. In , Proceedings - 5th IEEE International Conference on Semantic Computing, ICSC 2011, pp.514-521, ISBN: 9780769544922. DOI: 10.1109/ICSC.2011.14.

Young, RIM, Chungoora, N, Usman, Z, Anjum, NA, Gunendran, AG, Palmer, C, Harding, JA, Case, K, Cutting-Decelle, A-F (2011) Reference ontologies for manufacturing-based ecosystems. In Zelm, M, Johnson, P, Doumeingts, G, van Sinderen, M (ed) Third International Working Conference on Enterprise Interoperability, IWEI 2011, 'Enterprise Interoperability', the Proceedings of the Third International Working Conference on Enterprise Interoperability, IWEI 2011, Stockholm, Sweden, pp.61-72, ISBN: 9781848213173.

Anjum, NA, Harding, JA, Young, RIM (2011) Shape Feature Based Ontological Engineering Product Models. In IWEI 2011, The International IFIP Working Conference on Enterprise Interoperability, Stockholm, Sweden.

Usman, Z, Young, RIM, Chungoora, N, Palmer, C, Case, K, Harding, JA (2011) A Manufacturing Core Concepts Ontology for Product Lifecycle Interoperability. In IWEI 2011, The International IFIP Working Conference on Enterprise Interoperability, Stockholm, Sweden.

Usman, Z, Young, RIM, Chungoora, N, Palmer, C, Case, K, Harding, J (2011) A Manufacturing Core Concepts Ontology for Product Lifecycle Interoperability. In VanSinderen, M and Johnson, P (ed) 3rd International IFIP Working Conference on Enterprise Interoperability, ENTERPRISE INTEROPERABILITY, Royal Inst Technol, Stockholm, SWEDEN, pp.5-18, ISBN: 978-3-642-19679-9.

Urwin, EN, Frazer, L, Hunt, D, Young, R (2011) Manufacturing knowledge reuse for product design. In 9th International Conference on Manufacturing Research (ICMR 2011), Advances in Manufacturing Technoloby XXV: Proceedings of the 9th International Conference on Manufacturing Research (ICMR2011), Glasgow, pp.145-150, ISBN: 978-1-905-86656-4.

Anjum, NA, Harding, JA, Young, RIM, Case, K (2011) Shape Feature-Based Ontological Engineering Product Models. In Zelm, M, Johnson, P, Doumeingts, G, van Sinderen, M (ed) Third International IFIP Working Conference on Enterprise Interoperability, IWEI 2011, Enterprise Interoperability, Stockholm, Sweden, pp.223-242, ISBN: 9781848213173.

Choudhary, AK, Harding, JA, Swarnkar, R, Das, BP, Young, RIM (2010) Learning Collaboration Moderator Services: Supporting Knowledge based Collaboration. In Camarinha-Matos, LM, Boucher, X, eds, HA (ed) Collaborative Networks for a Sustainable World, 11th IFIP WG 5.5 Working Conference on Virtual Enterprises, PRO-VE 2010, Proceedings Series: IFIP Advances in Information and Communication Technology, St Etienne, France, pp.593-600, ISBN: 978-3-642-15960-2.

Anjum, NA, Harding, JA, Young, RIM (2010) Cross domain knowledge verification: Verifying knowledge in foundation based domain ontologies. In International Conference on Knowledge Engineering and Ontolgy Development (KEOD 2010), Valencia, Spain.

Choudhary, AK, Harding, JA, Swarnkar, R, Das, BP, Young, RIM (2010) Learning Collaboration Moderator Services: Supporting Knowledge based Collaboration. In Camarinha-Matos, LM, Boucher, X, Afsarmanesh, H (ed) PRO-VE 2010, 11th IFIP WG 5.5 Working Conference on Virtual Enterprises, Collaborative Networks for a Sustainable World, Proceedings Series: IFIP Advances in Information and Communication Technology, St. Etienne, France, pp.593-600, ISBN: 978-3-642-15960-2.

Das, BP, Shah, A, Harding, JA, Palmer, C, Swarnkar, R, Young, RIM, Popplewell, K (2010) An application of a rule-based system towards resolving exception events of business processes within a small Virtual Organization, Paper number 1053. In Proceedings of FAIM 2010 (20th International Conference: Flexible Automations and Intelligent Manufacturing), California State University, USA, pp.20-28.

Anjum, NA, Harding, JA, Young, RIM, Case, K (2010) Gap analysis of ontology mapping tools and techniques. In Popplewell, K, Harding, JA, Poler, R, Chalmeta, R (ed) International Conference on Interoperability for Enterprise Software and Applications, I-ESA 2010, 'Enterprise Interoperability IV', the Proceedings of the International Conference on Interoperability for Enterprise Software and Applications, I-ESA 2010, Coventry University, UK, pp.303-312, ISBN: 978-1-84996-256-8. DOI: 10.1007/978-1-84996-257-5_28.

Usman, Z, Young, RIM, Case, K, Harding, JA (2010) A manufacturing foundation ontology for product life cycle interoperability. In Popplewell, K, Harding, JA, Poler, R, Chalmeta, R (ed) International Conference on Interoperability for Enterprise Software and Applications, I-ESA 2010, 'Enterprise Interoperability IV', the Proceedings of the International Conference on Interoperability for Enterprise Software and Applications, I-ESA 2010, Coventry University, UK, pp.147-155, ISBN: 978-1-84996-256-8. DOI: 10.1007/978-1-84996-257-5_14.

Young, RIM, Chungoora, N, Usman, Z, Anjum, N, Gunendran, AG, Palmer, C, Harding, JA, Case, K (2010) An exploration of foundation ontologies and verification methods for manufacturing knowledge sharing. In Panetto, H and Boudjlida, N (ed) Workshop on Interoperability for Enterprise Software and Applications, I-ESA 2010, 'Interoperability for Enterprise Software and Applications', the Proceedings of the Workshops and Doctorial Symposium of the I-ESA International Conference, Coventry University, UK, pp.83-92, ISBN: 978-1-84821-270-1.

Chungoora, N (2010) A framework to support semantic interoperability in product design and manufacture. In .

Anjum, NA, Harding, J, Young, B (2010) CROSS DOMAIN KNOWLEDGE VERIFICATION Verifying Knowledge In Foundation Ontology Based Domain Ontologies. In , KEOD 2010: PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON KNOWLEDGE ENGINEERING AND ONTOLOGY DEVELOPMENT, pp.339-342, ISBN: 978-989-8425-29-4.

Palmer, C, Das, BP, Swarnkar, R, Harding, JA, Young, RIM, Wulan, M, Dai, X, Popplewell, K (2009) A Demonstration of Collaboration Pattern Applications in Virtual Organizations. In ICMR09, (7th International Conference on Manufacturing Research, proceedings of ICMR09, (7th International Conference on Manufacturing Research, Warwick, UK, pp.193-197.

Young, RIM, Gunendran, AG, Chungoora, N, Harding, JA, Case, K (2009) Enabling interoperable manufacturing knowledge sharing in PLM. In McMahon, C, Dutta, D, Huang, G (ed) Sixth International Product Life Cycle Management Conference, PLM09, 'Supporting the Extended Enterprise', Proceedings of the Sixth International Product Life Cycle Management Conference, PLM09, University of Bath, Bath, UK, pp.130-138, ISBN: 9780907776499.

Baxter, D, Gao, J, Case, K, Harding, J, Young, B, Cochrane, S, Dani, S (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. In 3rd International Conference on Manufacturing Research, ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, Cranfield Univ, Cranfield, ENGLAND, pp.585-593, DOI: 10.1016/j.rcim.2007.07.010.

Gunendran, AG and Young, RIM (2008) Methods for the Capture and Reuse of Manufacturing Best Practice in Product Lifecycle Management. In Proceedings of the 5th International Conference on Product Lifecycle Management (PLM-08), Seoul, Korea.

Chungoora, N and Young, RIM (2008) Ontology Mapping to Support Semantic Interoperability in Product Design and Manufacture. In Proceedings of the 1st International Workshop on Model Driven Interoperability for Sustainable Information Systems (MDISIS'08) in conjuction with the CAiSE '08 Conference, Montpellier, France, pp.1-15.

Chungoora, N and Young, RIM (2008) Semantic Interoperability Requirements for Manufacturing Knowledge Sharing. In Mertins, K, Ruggaber, R, Popplewell, K, Xu, eds, X (ed) Enterprise Interoperability III - New Challenges and Industrial Approaches, Berlin, pp.411-422, ISBN: 978-1-84800-220-3. DOI: 10.1007/978-1-84800-221-0.

Gunendran, AG, Young, RIM, Geiss, M, McMahon, CA (2007) Organising structured and unstructured information for long term retrieveability. In Proceedings of the 4th International Conference on Digital Enterprise Technology (DET 2007), Bath, UK, pp.19-21.

Gunendran, AG, Young, RIM, Cutting Decelle, AF, Bourey, JP (2007) Information organisation in design: the application of formal ontologies. In Proceedings of the 16th International Conference on Engineering Design ICED 07, Paris, France, pp.28-31.

Gunendran, AG, Young, RI, Cutting Decelle, AF, Bourey, JP (2007) Organising Manufacturing Information for Engineering Interoperability. In Goncalves, J, R, Muller, P, J, Mertins, K, Zelm, eds, M (ed) Proceedings of IESA 2007, Enterprise Interoperability II New challenges and Approaches, Madeira, pp.587-598, ISBN: 978-1-84628-857-9.

Young, RI and Das, BP (2006) Flexible Integration Architectures: ground work on approaches for AV interoperability. In Proceedings of Systems Engineering for Autonomous systems Defence Technology Centre (SEAS DTC), Section B1, Edinburgh, Scotland, UK.

Cutting Decelle, AF, Das, BP, Young, RI, Case, K, Bouchlaghem, NM, Anumba, CJ (2006) Information exchanges in a cross-disciplinary supply chain: formal strategy and application. In Dolgui, A, Morel, G, Pereira, C (ed) Information systems, control and interoperability, INCOM 2006, Proceedings of INCOM 2006: Information systems, control and interoperability, St-Etienne, France, pp.603-613, DOI: 10.1016/B978-008044654-7/50228-4.

Cutting-Decelle, AF, Young, RI, Bourey, JP, Michel, JJ, Pouchard, LC (2006) A Standardised Data Model for Process and Flow Management: ISO 15531-43 – A Step Towards CE in Manufacturing. In , Frontiers in Artificial Intelligence and Applications, pp.371-378, ISBN: 9781586036515.

Young, RI, Gunendran, AG, Cutting Decelle, AF (2005) Sharing manufacturing knowledge in PLM: are manufacturing ontologies the answer?. In Gao, JX, Baxter, DI, Sackett, PJ (ed) Proceedings of the 3rd International Conference on Manufacturing Research, Advances in Manufacturing Technology and Management, Cranfield University, UK,ISBN: 1-861941-22-6.

Cochrane, SD, Case, K, Young, RI, Harding, JA, Dani, S (2005) Knowledge reuse in manufacturability analysis. In Gao, JX, Baxter, DI, Sackett, PJ (ed) Third International Conference on Manufacturing Research 2005, 'Advances in Manufacturing Technology and Management', the Proceedings of the Third International Conference on Manufacturing Research, ICMR 2005, Cranfield University, UK, pp.1-5, ISBN: 1-861941-22-6.

Cochrane, SD, Case, K, Young, RI, Harding, JA, Dani, S (2005) Knowledge sharing between design and manufacture. In Khosla, R, Howlett, RJ, Jain, LC (ed) Ninth International Conference on Knowledge-Based Intelligent Information & Engineering Systems, KES 2005, Proceedings of the Ninth International Conference on Knowledge Engineering Systems, KES 2005, 'Knowledge-based Intelligent Information and Engineering Systems’, Melbourne, Australia, pp.221-227, ISBN: 9783540288978. DOI: 10.1007/11554028_32.

Young, RI (2005) Views of Manufacturing Information: Organisational Issues in PLM. In MDT Europe 2005, Manufacturing Data Technology Conference and Workshop, Gothenburg, Sweden.

Cochrane, SD, Case, K, Young, RI, Harding, JA, Dani, S (2004) Knowledge sharing between design and manufacture. In Phelan, P (ed) Twenty-first International Manufacturing Conference, IMC21, 'Servicing Manufacturing', the Proceedings of the Twenty-first International Manufacturing Conference, IMC21, University of Limerick, Ireland, pp.3-10, ISBN: 1-8746537-7-1.

Cochrane, SD, Case, K, Young, RI, Harding, JA, Dani, S (2004) Sharing manufacturing knowledge. In Saad, S and Perera, T (ed) Second International Manufacturing Research, ICMR2004, 'Advances in Manufacturing Technology XVIII', the Proceedings of the Second International Conference on Manufacturing Research, ICMR 2004, Sheffield Hallam University, UK, pp.105-109, ISBN: 9781843870883.

Young, RI, Guerra, D, Gunendran, G, Das, B, Cochrane, SD, Cutting Decelle, AF (2004) Sharing Manufacturing Information and Knowledge in Design Decision Support. In Proceedings of the 5th International conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME), Bath, UK, pp.CD-ROM.

Cutting Decelle, AF, Young, RI, Das, B, Anumba, CJ, Bouchlaghem, NM (2004) A multi-disciplinary representation of supply chain information in construction: an innovate approach to project management. In Tools and Methods of Competetive Engineering (TMCE), Lausane, Switzerland, pp.465-474, ISBN: 9-0596-60188.

Das, B, Cutting Decelle, AF, Young, RI, Bouchlaghem, NM, Anumba, CJ (2004) Towards the development of a language for cross-disciplinary interoperability for supply chain management. In Wang, L, Xi, J, sullivan, W, Ahmad, M (ed) Flexible automation and intelligent manufacturing (FAIM2004), Canada, pp.1325-1332, ISBN: 0-662-37241-7.

Cutting Decelle, AF, Pouchard, L, Michel, JJ, Young, RI, Das, B (2004) Unilising Standards based approaches to information sharing and interoperability in manufacturing decision support. In Wang, L, Xi, J, Sullivan, W, ahmad, M (ed) Flexible automation and intelligent manufacturing (FAIM2004), Canada, pp.1128-1137, ISBN: 0-662-37241-7.

Costa, CA and Young, RI (2003) Interaction Elements: utilising knowledge to provide high quality information in a decision support system. In Proceedings of the 10th ISPE International Conference on Concurrent Engineering: Research Applications, Funchal, Maderia, pp.727-34, ISBN: 90-5809-622X.

Young, RI, Espinosa, A, Gunendran, G, Guerra, D, Liu, S (2003) Information and knowledge sharing in design decision support. In Proceedings of the 10th ISPE International Conference on concurrent Engineering: Research and Applications, Funchal, Maderia, pp.147-153, ISBN: 90-5809-622X.

Espinosa Bautista, A and Young, RI (2002) The Use and Representation of Design Intent to Support Engineering Designer. In Proceedings of the EDC Conference, "Computer Based Design", London, UK, pp.447-456, ISBN: 186058-3725.

Gunendran, AG and Young, RI (2002) A Framework for Interoperability in Team Based Software. In Proceedings of the 9th ISPE International Conference on Concurrent Engineering: Research and Applications, "Advances in Concurrent Engineering", Cranfield, UK, pp.925-931, ISBN: 90-5809-502-9.

Cutting Decelle, AF, Young, RI, Anumba, CJ, Baldwin, AN, Bouchlaghem, NM (2002) A New Challenge of CE: PSL, a Standardised Language for an Integrated Supply Chain Management. In Proceedings of the 9th ISPE International Conference on Concurrent Engineering: Research and Applications, "Advances in Concurrent Engineering", Cranfield, UK, pp.1051-1055, ISBN: 90-5809-502-9.

Guerra, D and Young, RI (2002) Knowledge Maintenance in Knowledge-Based Product Development Systems. In Marik, V, Camarinha-Matos, LM, Eds, HA (ed) Proceedings of the Knowledge and TEchnology Integration in Production and Services Conference, Cancun, Mexico, pp.403-410, ISBN: 1-4020-7211-2.

Young, RI, Dorador, JM, Zhao, J, Wang, S, Costa, CA (2001) A Shared Information/Knowledge Environment to Support Concurrent Engineering. In Proceedings of the 8th ISPE International Conference on Concurrent Engineering: Research and Applications, "Advances in Concurrent Engineering", California, USA, pp.Paper IS-5, ISBN: 0-9710461-0-7.

Cutting Decelle, AF, Young, RI, Anumba, CJ, Baldwin, AN, Bouchlaghem, NM (2001) The Application of PSL to Product Design Across Construction and Manufacture. In Proceedings of the 8th ISPE International Conference on Concurrent Engineering: Research and Applications, "Advances in Concurrent Engineering", California, USA, pp.Paper IS-2, ISBN: 0-9710461-0-7.

Liu, S and Young, RI (2001) Information Models for the Global Manufacturing Enterprise. In Proceedings of the 17th National Conference on Manufacturing Research, "Advances in Manufacturing Technology", Cardiff University, UK, pp.307-312, ISBN: 1-86058-325-3.

Young, RI, Dorador, JM, Cheung, WM, Zhao, J (2000) A manufacturing infrastructure to link team based design to global manufacture. In The 4th International Conference on Design of Information Infrastructure Systems for Manufacture, Melbourne, Australia, p.4 14:00.

Cheung, WM, Zhao, J, Dorador, JM, Young, RI (2000) Linking Product Design and Manufacturing Capability Through a Manufacturing Strategy Representation. In ed, JAM (ed) Proceedings of the 16th International Conference on Computer-Aided Production Engineering (CAPE2000), Edinburgh, pp.615-622, ISBN: 1-86058-263-X.

Young, RI, Canciglieri Jnr, O, Costa, CA, Dorador, JM, Zhao, J, Cheung, WM (2000) Information Support in an Integrated Product Development System. In Proceedings of the 3rd International Conference on Integrated Design and Manufacture in Mechanical Engineering (IDMME'2000), Montreal, Canada, Paper MA3.1, ISBN: 2-553-00803-1.

Zhao, J, Cheung, WM, Young, RI (2000) The Influence of Manufacturing Information Models on Product Development Systems. In Sivaloganathan, S and eds, PTJA (ed) Proceedings of the Engineering Design Conference 2000, Design for Excellence, Brunel University, UK, pp.763-770, ISBN: 1-86058-259-1.

Dorador, JM and Young, RI (1999) Information Models to Support the Interaction Between Design for Assembly and Assembly Process Planning. In Proceedings of the 1999 IEEE International Symposium on Assembly and Task Planning (ISATP '99), Porto, Portugal, pp.39-44, ISBN: 0-7803-5704-3.

Zhao, J, Cheung, WM, Young, RI, Bell, R (1999) An Object Oriented Manufacturing Data Model for a Global Enterprise. In Proceedings of the 15th International Conference on Computer-Aided Production Engineering (CAPE '99), Durham, UK, pp.582-588, ISBN: 0-9535558-0-1.

Young, RI, Canciglieri Jnr, O, Costa, CA (1998) Information Interactions in Data Model Driven Design for Manufacture. In Proceedings of the 10th IFIP WG5.2/5.3 International Conference 'PROLAMAT 98', Trento, Italy, paper #53.

Costa, C and Young, RI (1998) Product Range Models: Linking Functional Design to the Reuse of Manufacturing Information. In Sivaloganathan, DS and Eds, DTMMS (ed) Proceedings of the Engineering Design Conference '98 - Design Reuse, Brunel University, pp.621-628, ISBN: 1 86058 132 3.

Bugtai, N and Young, RI (1997) Information Models in an Integrated Fixture Decision Support Tool. In Proceedings of the 13th International Conference on Computer-Aided Production Engineering, Warsaw, Poland, pp.87-94.

Canciglieri, O and Young, RI (1997) A Multi-Viewpoint Reasoning System in Design for Injection Moulding. In Proceedings of the CIRP International Conference on Design and Production of Dies and Moulds, Istanbul, Turkey, pp.21-26, ISBN: 975-429-106-3.

Young, RI (1996) Supporting Multiple Views in Design for Manufacture. In IFIP WG 5.2 Workshop, Proceedings of Knowledge Intensive CAD II, Carnegie Mellon University, Pittsburg, USA, pp.259-268, ISBN: 0-412-81450-1.

Molina, A, Ellis, TI, Young, RI, Bell, R (1995) An Integrated Framework for the Development of Computer Aided Engineering Systems. In Camarinha-Matos, and eds, HA (ed) Proceedings of the International Conference on Architectures and Design Methods for Balanced Automation Systems, BASYS '95, Victoria, ES, Brazil, pp.327-335.

Karacali, O, Young, RI, Bell, R (1994) Concurrent Design Expert Planner (CDEP) for Turned Parts: Software Information Aids to Support Design for Manufacturing in Concurrent Engineering Environment. In Paul, A and Sobolewski, ME (ed) First International Conference on Concurrent Engineering (CE94), Research and Applications: A Global Perspective, Pittsburgh, PA, USA, pp.433-444, ISBN: 0 96424490 X.

Backhouse, CJ, Fletcher, NP, Young, RI (1994) A Product Focused Miniproject Programme for First Year "Product Design and Manufacture" Students. In Proceedings of the Second International Symposium in Engineering Education, Limerick, Ireland, pp.267-272.

Ellis, TI, Molina, A, Young, RI, Bell, R (1994) The Development of an Information Sharing Platform for Concurrent Engineering. In Proceedings of European Workshop on Integrated Manufacturing Systems Engineering (IMSE '94), Grenoble, France, pp.501-510.

Lee, RJV and Young, RI (1994) Design for Manufacture: An Approach to Software Support in a Concurrent Engineering Environment. In Proceedings of Factory 2000, 4th International Conference on Advanced Factory Automation, York, pp.593-600.

Lee, RJV, Al Ashaab, A, Young, RI (1994) Resolving Feature Interactions in Design for Injection Moulding. In 10th National Conference on Manufacturing Research, Advances in Manufacturing Technology VIII, Loughborough, pp.274-278.

Molina, A, Ellis, TI, Young, RI, Bell, R (1994) Modelling Manufacturing Resources, Processes and Strategies to Support Concurrent Engineering. In Proceedings of CE94, Conference on Concurrent Engineering: Research and Applications, Pittsburgh, PA, USA, pp.51-60.

Al Ashaab, A and Young, RI (1994) A Manufacturing Model: Supporting Concurrency in Injection Moulded Products Design. In Proceedings of the 1994 Engineering Systems Design and Analysis Conference (ASME/ESDA), London, pp.33-43.

Young, RI (1994) Manufacturing Models. In Proceedings of Seminar on Information Systems for Competitive Manufacture, Loughborough University of Technology, pp.13-20.

Ellis, TI, Bell, R, Young, RI (1993) A Design for Manufacture Software Environment to Support Simultaneous Engineering. In Advances in Manufacturing Technology VII, Bath, pp.301-305.

Ellis, TI, Young, RI, Bell, R (1993) Modelling Manufacturing Process Information to Support Simultaneous Engineering. In Proceedings of 9th International Conference on Engineering Design 1993, The Hague, pp.1081-1084.

Young, RI (1992) The Pole of Product and Manufacturing Models in Concurrent Engineering. In eds, I (ed) Information Technology and Product Design, SERC/IMech Annual Expert Meeting, Sopwell House, St Albans, England, pp.69-73.



Books

Young, B, Goodall, P, Sharpe, R, Van-Lopik, K, Pease, S, Bhullar, G (2018) Part 1 Summary: Embedded intelligence discussion,ISBN: 9781786303738. DOI: 10.1002/9781119564034.part1.

Cuel, R and Young, R (2015) Preface,ISBN: 9783319215440.



CD Objects

Gunendran, AG and Young, RIM (2008) Methods for the Capture and Reuse of Manufacturing Best Practice in Product Lifecycle Management,Available on data stick, session E1, paper 109.

Young, RI, Gunendran, AG, Cutting Decelle, AF (2005) Sharing manufacturing knowledge in PLM: are manufacturing ontologies the answer?,, ISBN: 1-861941-22-6.

Young, RI, Guerra, D, Gunendran, G, Das, B, Cochrane, SD, Cutting Decelle, AF (2004) Sharing Manufacturing Information and Knowledge in Design Decision Support,.

Young, RI, Dorador, JM, Zhao, J, Wang, S, Costa, CA (2001) A Shared Information/Knowledge Environment to Support Concurrent Engineering,Balkema, ISBN: 0-9710461-0-7.

Cutting Decelle, AF, Young, RI, Anumba, CJ, Baldwin, AN, Bouchlaghem, NM (2001) The Application of PSL to Product Design Across Construction and Manufacture,Balkema, ISBN: 0-9710461-0-7.

Young, RI, Dorador, JM, Cheung, WM, Zhao, J (2000) A manufacturing infrastructure to link team based design to global manufacture,.

Young, RI, Canciglieri Jnr, O, Costa, CA, Dorador, JM, Zhao, J, Cheung, WM (2000) Information Support in an Integrated Product Development System,Presses Internationales Polytechnique, ISBN: 2-553-00803-1.

Young, RI, Canciglieri Jnr, O, Costa, CA (1998) Information Interactions in Data Model Driven Design for Manufacture,.



Chapters

Usman, Z and Young, RIM (2016) A metameta level formal manufacturing ontology for meta level production methods. In Proceedings of the I-ESA Conferences, pp.227-237, DOI: 10.1007/978-3-319-30957-6_18.

Junior, OC, Okumura, MLM, Young, RIM (2015) The application of an integrated product development process to the design of medical equipment. In Concurrent Engineering in the 21st Century: Foundations, Developments and Challenges, pp.735-759, ISBN: 9783319137759. DOI: 10.1007/978-3-319-13776-6_25.

Swarnkar, R, Harding, JA, Das, BP, Young, RI, Kumar, SK (2012) Application of collaboration moderator service in pharmaceutical industry: A collaborative drug discovery use case. In Proceedings of the I-ESA Conferences, pp.15-24, DOI: 10.1007/978-1-4471-2819-9_2.

Hastilow, NK and Young, RI (2012) Understanding ‘manufacturing intelligence’: A precursor to interoperable manufacturing systems. In Proceedings of the I-ESA Conferences, pp.49-57, DOI: 10.1007/978-1-4471-2819-9_5.

Cutting Decelle, AF, Young, RIM, Das, BP, Anumba, CJ, Stal Le Cardinal, J (2009) Standards based approaches to interoperability in supply chain management: overview and case study using the ISO 18629 PSL standard. In O'Brian, W, Formoso, C, Vrijhoef, R, London, eds, K (ed) In: Construction Supply Chain Management Handbook (Chapter 18), CRC Press Taylor Francis, pp.1-20, ISBN: 978-1-4200-4745-5.

Cutting-Decelle, AF, Barraud, JL, Young, B, Michel, JJ, Bigand, M (2009) Information modeling in production management: The ISO 15531 MANDATE standard. In Handbook of Enterprise Integration, pp.493-510, ISBN: 9781420078213. DOI: 10.1201/9781420078220.

Cutting-Decelle, AF, Young, RI, Das, BP, Anumba, CJ, Cardinal, JSL (2008) Standards-Based approaches to interoperability in supply chain management: Overview and case study using the iso 18629 psl standard. In Construction Supply Chain Management Handbook,18-1-18-20, ISBN: 9781420047455.

Young, RI, Gunendran, AG, Cutting Decelle, AF (2007) Manufacturing Information Organisation in Product Lifecycle Management. In Li, D, W, Ong, K, S, Nee, C, AY, McMahon, eds, C (ed) Collaborative Product Design and Manufacture, Springer-Verlag, pp.235-252, ISBN: 978-1-84628-801-2.

Grangel, R, Metral, C, Cutting Decelle, AF, Bourey, JP, Young, RI (2007) Ontology Based Communications Through Model Driven Tools: Feasibility of the MDA Approach in Urban Engineering Projects. In Teller, J, Lee, R, J, Roussey, eds, C (ed) Ontologies for Urban Development, Vol 61, Springer-Berlin/Heidelberg, pp.181-196, DOI: 10.1007/978-3-540-71976-2.

Young, RI, Guerra, D, Gunendran, G, Das, B, Cochrane, SD (2005) Sharing Manufacturing Information and Knowledge in Design Decision Support. In Bramley, A, Brissaud, D, Coutellier, D, McMahon, C (ed) Advances in integrated design and manufacturing in mechanical engineering, Springer, pp.173-188, ISBN: 1-4020-3481-4.

Guerra, D and Young, RIM (2005) A Manufacturing Model to Enable Knowledge Maintenance in Decision Support Systems. In Transactions on the North America Manufacturing Research Institution of SME 2005, The Society of Manufacturing Engineers in cooperation with the NAMRI of SME, pp.203-210, ISBN: 0-87263-777-8.

Canciglieri Jnr, O and Young, RI (2002) Product Model Based Multiple Viewpoint Information Sharing Using Features Technology. In Soenen, R and Eds, GJO (ed) Feature Based Product Life Cycle Modelling, Kluwer Academic Publishers, pp.109-128, ISBN: 1-4020-7327-5.

Young, RI, Canciglieri Jnr, O, Costa, CA, Dorador, JM, Zhao, J, Cheung, WM (2002) Information Support in an Integrated Product Development System. In Chedmail, Cognet, Fortin, Mascle, Eds, P (ed) Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publishers, pp.139-146, ISBN: 1-4020-0979-8.

Costa, CA and Young, RI (2001) A Combined Knowledge and Information Infrastructure to Support Product Development. In Camarinha-Matos, M, L, Afasarmanesh, H, Rabelo, J, R, Eds, (ed) E-Bussiness and Virtual Enterprises: Managing Business to Business Cooperation, Kluwer Academic Publishers, pp.507-514.

Young, RI, Dorador, JM, Zhao, J, Cheung, WM (2001) A Manufacturing Infrastructure to Link Team Based Design to Global Manufacture. In Mo, J and Eds, LN (ed) Global Engineering, Manufacturing and Enterprise Networks, Kluwer Academic Publishers, pp.283-290, ISBN: 0-7923-7358-8.

Young, RI, Canciglieri Jnr, O, Costa, CA (1998) Information Interactions in Data Model Driven Design for Manufacture. In Jacucci, G, Olling, GJ, Preiss, K, eds, MW (ed) Globalization of Manufacturing in the Digital Communications Era of the 21st Century, Kluwer Academic Publishers, pp.313-324.

Ellis, TI, Molina, A, Young, RI, Bell, R (1995) An Information Sharing Platform for Concurrent Engineering. In Ladet, P and Vernadat, FE (ed) Integrated Manufacturing Systems Engineering, Chapman and Hall on behalf of IFIP, pp.262-276.

Young, RI (1994) Machine Tool Programming: Techniques and Trends. In Kusiak, AE (ed) Handbook of Design, Manufacturing and Automation, Wiley, pp.297-312.



Other

Costa, CA and Young, RI (1999) Uma revidao em sistemas baseados em inteligencia artificial para suporte ao projecto de moldes de injecao.

Young, RI (1999) Business Process Engineering: Reference Models for Industrial Enterprises by August-Wilhelm Scheer.

Costa, CA and Young, RI (1999) Uma revidao em sistemas baseados em inteligencia artificial para suporte ao projecto de moldes de injecao.

Young, RI (1996) Balanced Automation Systems Architectures and Design Methods, edited by Camarinha-Matos, L.M. and Asfarmanesh, H.

Al Ashaab, AH, Molina, AM, Ellis, TI, Young, RIM (1995) Modelamento de Capabilidade de Manufactura: Suporte Para CAE.

Young, RI (1994) Parsaei, H.R. and Sullivan, W.G. "Concurrent Engineering: Contemporary Issues and Modern Design Tools".

Young, RI (1993) Wall, R.A. ''Engineer Guide to Product Information: Sources and Use''.

Backhouse, CJ and Young, RI (1993) Design Evaluation of Ejector Mechanism for MSH/11.



Getting in touch

Research Office
Loughborough University
Loughborough
Leicestershire
LE11 3TU
researchpolicy@lboro.ac.uk
+44 (0)1509 222453