Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Research Publications


Publications for Homayoon Rahnejat

From (year): To (year):

Download all publications as Word document


Journal Articles

Leighton, M, Morris, N, Rahnejat, H (2021) Transient nanoscale tribofilm growth: analytical prediction and measurement, Applied Sciences, 11(13), 5890, ISSN: 2076-3417. DOI: 10.3390/app11135890.

Umer, J, Morris, N, Rahmani, R, Rahnejat, H, Howell-Smith, S, Balakrishnan, S (2021) Effect of dispersant concentration with friction modifiers and anti-wear additives on the tribofilm composition and boundary friction, Journal of Tribology, 143(11), 111901, ISSN: 0742-4787. DOI: 10.1115/1.4050017.

Youssef, AM, Calderbank, G, Sherrington, I, Smith, EH, Rahnejat, H (2021) A critical review of approaches to the design of floating-liner apparatus for instantaneous piston assembly friction measurement, Lubricants, 9(1), pp.1-25, ISSN: 2075-4442. DOI: 10.3390/lubricants9010010.

Turnbull, R, Dolatabadi, N, Rahmani, R, Rahnejat, H (2021) Energy loss and emissions of engine compression rings with cylinder deactivation, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 235(7), pp.1930-1943, ISSN: 0954-4070. DOI: 10.1177/0954407020982868.

Johns-Rahnejat, PM, Dolatabadi, N, Rahnejat, H (2020) Analytical elastostatic contact mechanics of highly-loaded contacts of varying conformity, Lubricants, 8(9), 89, ISSN: 2075-4442. DOI: 10.3390/lubricants8090089.

Turnbull, R, Rahmani, R, Rahnejat, H (2020) The effect of outer ring elastodynamics on vibration and power loss of radial ball bearings, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 234(4), pp.707-722, ISSN: 1464-4193. DOI: 10.1177/1464419320951398.

Sivayogan, G, Rahmani, R, Rahnejat, H (2020) Transient analysis of isothermal elastohydrodynamic point contacts under complex kinematics of combined rolling, spinning and normal approach, Lubricants, 8(8), 81, ISSN: 2075-4442. DOI: 10.3390/lubricants8080081.

Morris, N, Johns-Rahnejat, P, Rahnejat, H (2020) Tribology and Dowson, Lubricants, 8(6), 63, DOI: 10.3390/lubricants8060063.

Votsios, V, Johns-Rahnejat, P, Rahnejat, H (2020) Viscoelastic finite line contact of thin bonded layered solids of low elastic modulus, Applied Sciences (Switzerland), 10(10), DOI: 10.3390/APP10103363.

Sivayogan, G, Rahmani, R, Rahnejat, H (2020) Lubricated loaded tooth contact analysis and non-newtonian thermoelastohydrodynamics of high-performance spur gear transmission systems, Lubricants, 8(2), 20, ISSN: 2075-4442. DOI: 10.3390/lubricants8020020.

Dolatabadi, N, Rahmani, R, Rahnejat, H, Garner, C, Brunton, C (2020) Performance of poly alpha olefin nanolubricant, Lubricants, 8(2), 17, DOI: 10.3390/lubricants8020017.

Forder, M, Umer, J, Morris, N, Rahmani, R, Howell-Smith, S, Rahnejat, H (2020) Asperity level frictional interactions of cylinder bore materials and lubricant composition, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235(4), pp.679-686, ISSN: 1350-6501. DOI: 10.1177/1350650120903928.

Umer, J, Morris, N, Rahmani, R, Balakrishnan, S, Rahnejat, H (2019) Nanoscale frictional characterisation of base and fully formulated lubricants based on activation energy components, Tribology International, 144, 106115, ISSN: 0301-679X. DOI: 10.1016/j.triboint.2019.106115.

Dolatabadi, N, Forder, M, Morris, N, Rahmani, R, Rahnejat, H, Howell-Smith, S (2019) Influence of advanced cylinder coatings on vehicular fuel economy and emissions in piston compression ring conjunction, Applied Energy, 259, 114129, ISSN: 0306-2619. DOI: 10.1016/j.apenergy.2019.114129.

Gkinis, T, Rahmani, R, Rahnejat, H (2019) Integrated thermal and dynamic analysis of dry automotive clutch linings, Applied Sciences, 9(20), 4287, ISSN: 2076-3417. DOI: 10.3390/app9204287.

Morris, N, Patel, R, Rahnejat, H (2019) Hydrodynamic lubricant film separation during co-directional and counter-directional rotations of disengaged wet clutch packs, Journal of Fluids Engineering, 142(1), 011104, ISSN: 0098-2202. DOI: 10.1115/1.4044443.

Turnbull, R, Dolatabadi, N, Rahmani, R, Rahnejat, H (2019) An assessment of gas power leakage and frictional losses from the top compression ring of internal combustion engines, Tribology International, 142, 105991, ISSN: 0301-679X. DOI: 10.1016/j.triboint.2019.105991.

Turnbull, R, Rahmani, R, Rahnejat, H (2019) In-plane and out-of-plane elastodynamics of thin rings and seals, Journal of Computational and Nonlinear Dynamics, 14(8), pp.081006-081006, ISSN: 1555-1415. DOI: 10.1115/1.4043526.

Morris, N, Davies, JA, Leighton, M, King, P, Rahnejat, H (2019) Oil film separation and drag torque in disengaged wet brakes, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 234(1), pp.17-27, ISSN: 0954-4070. DOI: 10.1177/0954407019844358.

Oglieve, C, Sivayogan, G, Mohammadpour, M, Rahnejat, H (2019) Lubricated loaded tooth contact analysis for spur gear pair, International Journal of Powertrains, ISSN: 1742-4267. DOI: 10.1504/IJPT.2019.098119.

Fatourehchi, E, Mohammadpour, M, King, P, Rahnejat, H, Trimmer, G, Womersley, B, Williams, A (2019) Effect of tooth profile modification on the durability of planetary hub gears, International Journal of Powertrains, 8(1), pp.40-57, ISSN: 1742-4267. DOI: 10.1504/IJPT.2019.098120.

Dolatabadi, N, Rahmani, R, Rahnejat, H, Garner, C (2019) Thermal conductivity and molecular heat transport of nanofluids, RSC Advances, 9(5), pp.2516-2524, DOI: 10.1039/c8ra08987f.

Humphrey, E, Morris, N, Rahmani, R, Rahnejat, H (2018) Multiscale boundary frictional performance of diamond like carbon coatings, Tribology International, 149, 105539, ISSN: 0301-679X. DOI: 10.1016/j.triboint.2018.12.039.

Bewsher, R, Leighton, M, Mohammadpour, M, Rahnejat, H, Offner, G, Knaus, O (2018) Boundary friction characterisation of a used cylinder liner subject to fired engine conditions and surface deposition, Tribology International, 131, pp.424-437, ISSN: 1879-2464. DOI: 10.1016/j.triboint.2018.11.005.

Umer, J, Morris, N, Leighton, M, Rahmani, R, Balakrishnan, S, Rahnejat, H (2018) Nano and microscale contact characteristics of tribofilms derived from fully formulated engine oil, Tribology International, ISSN: 0301-679X. DOI: 10.1016/j.triboint.2018.11.007.

Kozuch, E, Nomikos, P, Rahmani, R, Morris, N, Rahnejat, H (2018) Effect of shaft surface roughness on the performance of radial lip seals, Lubricants, 6(4), DOI: 10.3390/lubricants6040099.

Teo, WJ, Dolatabadi, N, Rahmani, R, Morris, N, Rahnejat, H (2018) Combined analytical and experimental evaluation of frictional performance of lubricated untextured and partially textured sliders, Lubricants, 6(4), DOI: 10.3390/lubricants6040088.

Patel, R, Rahmani, R, Rahnejat, H (2018) Psychoacoustic analysis of high frequency elasto-acoustic emissions from hollow driveshaft tubes, SAE, DOI: 10.4271/2018-01-1475.

Humphrey, E, Morris, N, Leighton, M, Rahmani, R, Rahnejat, H (2018) Multiscale friction in lubricant-surface systems for high performance transmissions under mild wear, Tribology Letters, 66, 77, ISSN: 1023-8883. DOI: 10.1007/s11249-018-1032-z.

Fatourehchi, E, Shahmohamadi, H, Mohammadpour, M, Rahmani, R, Theodossiades, S, Rahnejat, H (2018) Thermal analysis of an oil jet-dry sump transmission gear under mixed-elastohydrodynamic conditions, Journal of Tribology, 140(5), ISSN: 0742-4787. DOI: 10.1115/1.4039567.

Leighton, M, Morris, N, Trimmer, G, King, P, Rahnejat, H (2018) Efficiency of disengaged wet brake packs, Proc. IMechE, Part D: Journal of Automobile Engineering, ISSN: 0954-4070. DOI: 10.1177/0954407018758567.

Dolatabadi, N, Rahmani, R, Theodossiades, S, Rahnejat, H, Blundell, G, Bernard, G (2018) Tribodynamics of hydraulic actuated clutch system for engine-downsizing in heavy duty off-highway vehicles, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 233(4), pp.976-993, ISSN: 0954-4070. DOI: 10.1177/0954407018756789.

Alevras, P, Theodossiades, S, Rahnejat, H (2018) On the dynamics of a nonlinear energy harvester with multiple resonant zones, Nonlinear Dynamics, 92, pp.1271-1286, ISSN: 0924-090X. DOI: 10.1007/s11071-018-4124-2.

Morris, N, Shahmohamadi, H, Rahmani, R, Rahnejat, H, Garner, C (2018) Combined experimental and multiphase computational fluid dynamics analysis of surface textured journal bearings in mixed regime of lubrication, Lubrication Sciences, ISSN: 0954-0075. DOI: 10.1002/ls.1414.

Morris, N, Mohammadpour, M, Rahmani, R, Johns-Rahnejat, PM, Rahnejat, H, Dowson, D (2018) Effect of cylinder deactivation on tribological performance of piston compression ring and connecting rod bearing, Tribology International, ISSN: 1879-2464. DOI: 10.1016/j.triboint.2017.12.045.

Fatourehchi, E, Mohammadpour, M, King, P, Rahnejat, H, Trimmer, G, Womersley, B, Williams, A (2018) Microgeometrical tooth profile modification influencing efficiency of planetary hub gears, International Journal of Powertrains, ISSN: 1742-4267. DOI: 10.1504/IJPT.2018.10011451.

Gkinis, T, Rahmani, R, Rahnejat, H, O'Mahony, M (2018) Heat generation and transfer in automotive dry clutch engagement, Journal of Zhejiang University Science A, 19(3), pp.175-188, ISSN: 1673-565X. DOI: 10.1631/jzus.A1700481.

Bewsher, R, Mohammadpour, M, Rahnejat, H, Offner, G, Knaus, O (2018) An investigation into the oil transport and starvation of piston-ring pack, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, ISSN: 2041-305X. DOI: 10.1177/1350650118768310.

Eskandarzade, M, Bewsher, R, Mohammadpour, M, Tutunchi, A, Osouli, K, Rahnejat, H (2018) Friction reduction in bulk nanostructured material subjected to severe plastic deformation, Journal of Materials Engineering and Performance, ISSN: 1059-9495.

Fatourehchi, E, Mohammadpour, M, Theodossiades, S, Rahnejat, H (2018) Transient thermal analysis of mixed-elastohydrodynamic contact of high performance transmission in a dry sump environment, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, ISSN: 2041-305X. DOI: 10.1177/1350650118775802.

Bewsher, R, Leighton, M, Mohammadpour, M, Rahnejat, H, Offner, G, Knaus, O (2018) Atomic force microscopic measurement of a used cylinder liner for prediction of boundary friction, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, ISSN: 0954-4070. DOI: 10.1177/0954407018792143.

Paouris, LI, Rahmani, R, Theodossiades, S, Rahnejat, H, Hunt, G, Barton, W (2017) Inefficiency predictions in a hypoid gear pair through tribodynamics analysis, Tribology International, 119, pp.631-644, ISSN: 0301-679X. DOI: 10.1016/j.triboint.2017.11.035.

Rahmani, R and Rahnejat, H (2017) Enhanced performance of optimised partially textured load bearing surfaces, Tribology International, 117, pp.272-282, ISSN: 1879-2464. DOI: 10.1016/j.triboint.2017.09.011.

Umer, J, Morris, N, Leighton, M, Rahmani, R, Howell-Smith, SJ, Wild, R, Rahnejat, H (2017) Asperity level tribological investigation of automotive bore material and coatings, Tribology International, ISSN: 1879-2464. DOI: 10.1016/j.triboint.2017.08.023.

Dolatabadi, N, Rahmani, R, Theodossiades, S, Rahnejat, H, Blundell, G, Bernard, G (2017) Tribodynamics of a new declutch mechanism aimed for engine downsizing in off-road heavy-duty vehicles, SAE Technical Papers, 2017-01-1835, ISSN: 0148-7191. DOI: 10.4271/2017-01-1835.

Oglieve, CJ, Mohammad Pour, M, Rahnejat, H (2017) Optimisation of the vehicle transmission and the gear-shifting strategy for the minimum fuel consumption and the minimum nitrogen oxide emissions, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 231(7), pp.883-899, ISSN: 0954-4070. DOI: 10.1177/0954407017702985.

Gkinis, T, Rahmani, R, Rahnejat, H (2017) Effect of clutch lining frictional characteristics on take-up judder, Proceedings of institution of Mechanical Engineers, Part K: journal of multi-body dynamics, ISSN: 1464-4193. DOI: 10.1177/1464419317708946.

Morris, N, Rahmani, R, Rahnejat, H (2017) A hydrodynamic flow analysis for optimal positioning of surface textures, IMECHE Part J: Journal of Engineering Tribology, 231(9), ISSN: 1350-6501. DOI: 10.1177/1350650117709672.

Elisaus, V, Mohammadpour, M, Theodossiades, S, Rahnejat, H (2017) Effect of teeth micro-geometrical form modification on contact kinematics and efficiency of high performance transmissions, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 231(3), pp.538-555, ISSN: 1464-4193. DOI: 10.1177/1464419317710157.

Rahmani, R, Rahnejat, H, Fitzsimons, B, Dowson, D (2017) The effect of cylinder liner operating temperature on frictional loss and engine emissions in piston ring conjunction, Applied Energy, 191, pp.568-581, ISSN: 0306-2619. DOI: 10.1016/j.apenergy.2017.01.098.

Gore, M, Morris, N, Rahmani, R, Rahnejat, H, King, P, Howell-Smith, SJ (2017) A combined analytical-experimental investigation of friction in cylinder liner inserts under mixed and boundary regimes of lubrication, Lubrication Science, 29(5), pp.293-316, ISSN: 0954-0075. DOI: 10.1002/ls.1369.

Leighton, M, Morris, N, Rahmani, R, Rahnejat, H (2017) Surface specific asperity model for prediction of friction in boundary and mixed regimes of lubrication, Meccanica, pp.1-13, ISSN: 0025-6455. DOI: 10.1007/s11012-016-0397-z.

Baker, CE, Theodossiades, S, Rahmani, R, Rahnejat, H, Fitzsimons, B (2017) On the transient three dimensional tribodynamics of internal combustion engine top compression ring, Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, ISSN: 1528-8919. DOI: 10.1115/1.4035282.

Morris, N, Mohammadpour, M, Rahmani, R, Rahnejat, H (2017) Optimisation of piston compression ring for improved energy efficiency of high performance race engines, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, ISSN: 2041-2991. DOI: 10.1177/0954407016686249.

Mohammadpour, M, Theodossiades, S, Rahnejat, H, Dowson, D (2017) Non-newtonian mixed thermo-elastohydrodynamics of hypoid gear pairs, Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, ISSN: 1350-6501. DOI: 10.1177/1350650117700756.

Alevras, P, Theodossiades, S, Rahnejat, H (2017) Broadband energy harvesting from parametric vibrations of a class of nonlinear Mathieu systems, Applied Physics Letters, ISSN: 0003-6951. DOI: 10.1063/1.4984059.

Haris, A, Motato, E, Mohammadpour, M, Theodossiades, S, Rahnejat, H, O'Mahony, M, Vakakis, AF, Bergman, LA, McFarland, DM (2017) On the effect of multiple parallel nonlinear absorbers in palliation of torsional response of automotive drivetrain, International Journal of Non-Linear Mechanics, ISSN: 0020-7462.

Turnbull, R, Mohammadpour, M, Rahmani, R, Rahnejat, H, Offner, G (2017) Coupled elastodynamics of piston compression ring subject to sweep excitation, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, ISSN: 2041-3068. DOI: 10.1177/1464419317725942.

Fatourehchi, E, Mohammadpour, M, King, P, Rahnejat, H, Trimmer, G, Williams, A, Womersley, B (2017) Effect of mesh phasing on the transmission efficiency and dynamic performance of wheel hub planetary gear sets, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, ISSN: 2041-2983. DOI: 10.1177/0954406217737327.

Shahmohamadi, H, Rahmani, R, Rahnejat, H, Garner, C, Balodimos, N (2016) Thermohydrodynamics of lubricant flow with carbon nanoparticles in tribological contacts, Tribology International, 113, pp.50-57, ISSN: 0301-679X. DOI: 10.1016/j.triboint.2016.12.048.

Bewsher, R, Turnbull, R, Mohammadpour, M, Rahmani, R, Rahnejat, H, Offner, G, Knaus, O (2016) Effect of cylinder de-activation on the tribological performance of compression ring conjunction, Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 231(8), pp.997-1006, ISSN: 1350-6501. DOI: 10.1177/1350650116684985.

Leighton, M, Nicholls, TA, De la Cruz, M, Rahmani, R, Rahnejat, H (2016) Combined lubricant-surface system perspective: multi-scale numerical-experimental investigation, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 231(7), pp.910-924, ISSN: 1350-6501. DOI: 10.1177/1350650116683784.

Motato, E, Haris, A, Theodossiades, S, Mohammadpour, M, Rahnejat, H, Kelly, P, Vakakis, AF, McFarland, DM, Bergman, LA (2016) Targeted energy transfer and modal energy redistribution in automotive drivetrains, Nonlinear Dynamics, 87, pp.169-190, ISSN: 1573-269X. DOI: 10.1007/s11071-016-3034-4.

Paouris, L, Rahmani, R, Theodossiades, S, Rahnejat, H, Hunt, G, Barton, W (2016) An analytical approach for prediction of elastohydrodynamic friction with inlet shear heating and starvation, Tribology Letters, 64(1), ISSN: 1573-2711. DOI: 10.1007/s11249-016-0740-5.

Su, H, Rahmani, R, Rahnejat, H (2016) Thermohydrodynamics of bidirectional groove dry gas seals with slip flow, International Journal of Thermal Sciences, 110, pp.270-284, ISSN: 1290-0729. DOI: 10.1016/j.ijthermalsci.2016.07.011.

Su, H, Rahmani, R, Rahnejat, H (2016) Performance evaluation of bidirectional dry gas seals with special groove geometry, Tribology Transactions, ISSN: 1040-2004. DOI: 10.1080/10402004.2016.1146380.

Leighton, M, Rahmani, R, Rahnejat, H (2016) Surface-specific flow factors for prediction of friction of crosshatched surfaces, Surface Topography: Metrology and Properties, 4(1), DOI: 10.1088/2051-672X/4/2/025002.

Mohammadpour, M, Theodossiades, S, Rahnejat, H (2016) Dynamics and efficiency of planetary gear sets for hybrid powertrains, Proceedings of the IMechE, Part C: Journal of Mechanical Engineering Science, ISSN: 0954-4062. DOI: 10.1177/0954406215590644.

Paouris, L, Theodossiades, S, De la Cruz, M, Rahnejat, H, Kidson, A, Hunt, G, Barton, W (2016) Lubrication analysis and sub-surface stress field of an automotive differential hypoid gear pair under dynamic loading, Proceedings - Institution of Mechanical Engineers, Part C, ISSN: 0020-3483. DOI: 10.1177/0954406215608893.

Fatourehchi, E, Elisaus, V, Mohammadpour, M, Theodossiades, S, Rahnejat, H (2016) Efficiency and durability predictions of high performance racing transmissions, SAE International Journal of Passenger Cars - Mechanical Systems, 125(6), ISSN: 1946-3995. DOI: 10.4271/2016-01-1852.

Turnbull, R, Miknas, OR, Mohammadpour, M, Rahnejat, H (2016) Combined experimental and flexible multibody dynamic investigation of high energy impact-induced driveline vibration, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multibody Dynamics, ISSN: 1464-4193. DOI: 10.1177/1464419316659996.

Leighton, M, Morris, N, Gore, M, Rahmani, R, Rahnejat, H, King, P (2016) Boundary interactions of rough non-gaussian surfaces, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, ISSN: 1350-6501. DOI: 10.1177/1350650116656967.

Haris, A, Motato, E, Theodossiades, S, Rahnejat, H, Kelly, P, Vakakis, AF, Bergman, LA, McFarland, DM (2016) A study on torsional vibration attenuation in automotive drivetrains using absorbers with smooth and non-smooth nonlinearities, Applied Mathematical Modelling, ISSN: 1872-8480. DOI: 10.1016/j.apm.2016.09.030.

Mohammadpour, M, Morris, N, Leighton, M, Rahnejat, H (2015) Effect of surface topography upon micro-impact dynamics, Surface Topography: Metrology and Properties, 4(1), 014001, DOI: 10.1088/2051-672X/4/1/014001.

Morris, N, Rahmani, R, Rahnejat, H, King, P, Howell-Smith, SJ (2015) A numerical model to study the role of surface textures at top dead center reversal in the piston ring to cylinder liner contact, Journal of Tribology, 138(2), 021703, ISSN: 0742-4787. DOI: 10.1115/1.4031780.

Chong, WWF and Rahnejat, H (2015) Nanoscale friction as a function of activation energies, Surface Topography: Metrology and Properties, 3(4), pp.044002-044002, DOI: 10.1088/2051-672x/3/4/044002.

Theodossiades, S, De la Cruz, M, Rahnejat, H (2015) Prediction of airborne radiated noise from lightly loaded lubricated meshing gear teeth, APPLIED ACOUSTICS, 100, pp.79-86, ISSN: 0003-682X. DOI: 10.1016/j.apacoust.2015.06.014.

Dolatabadi, N, Littlefair, B, De la Cruz, M, Theodossiades, S, Rothberg, S, Rahnejat, H (2015) A transient tribodynamic approach for the calculation of internal combustion engine piston slap noise, Journal of Sound and Vibration, 352, pp.192-209, ISSN: 0022-460X. DOI: 10.1016/j.jsv.2015.04.014.

Gore, M, Rahmani, R, Rahnejat, H, King, P (2015) Assessment of friction from compression ring conjunction of a high-performance internal combustion engine: a combined numerical and experimental study, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230(12), pp.2073-2085, ISSN: 0954-4062. DOI: 10.1177/0954406215588480.

Shahmohamadi, H, Mohammadpour, M, Rahmani, R, Rahnejat, H, Garner, C, Howell-Smith, SJ (2015) On the boundary conditions in multi-phase flow through the piston ring-cylinder liner conjunction, Tribology International, 90, pp.164-174, ISSN: 1879-2464. DOI: 10.1016/j.triboint.2015.04.025.

Mohammadpour, M, Johns-Rahnejat, PM, Rahnejat, H (2015) Roller bearing dynamics under transient thermal-mixed non-Newtonian elastohydrodynamic regime of lubrication, Part K: Journal of Multi-body Dynamics, ISSN: 1464-4193. DOI: 10.1177/1464419315569621.

Shahmohamadi, H, Rahmani, R, Rahnejat, H, Garner, C, Dowson, D (2015) Big end bearing losses with thermal cavitation flow under cylinder deactivation, Tribology Letters, 57(2), ISSN: 1023-8883. DOI: 10.1007/s11249-014-0444-7.

Ku, ISY, Chong, WWF, Reddyhoff, T, Rahnejat, H (2015) Frictional characteristics of molecular length ultra-thin boundary adsorbed films, Meccanica, 50(7), pp.1915-1922, ISSN: 0025-6455. DOI: 10.1007/s11012-015-0186-0.

Shahmohamadi, H, Rahmani, R, Rahnejat, H, Garner, CP, Dowson, D (2015) Big End Bearing Losses with Thermal Cavitation Flow Under Cylinder Deactivation, TRIBOLOGY LETTERS, 57(2), ISSN: 1023-8883. DOI: 10.1007/s11249-014-0444-7.

Daliri, M, Jalali-Vahid, D, Rahnejat, H (2015) Magneto-hydrodynamics of couple stress lubricants in combined squeeze and shear in parallel annular disc viscous coupling systems, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 229(5), pp.578-596, ISSN: 1350-6501. DOI: 10.1177/1350650114556398.

Mohammadpour, M, Johns-Rahnejat, PM, Theodossiades, S, Rahnejat, H (2015) Effect of tapered roller bearing supports on the dynamic behaviour of hypoid gear pair differentials, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, ISSN: 2041-2991. DOI: 10.1177/0954407015598677.

Morris, N, Leighton, M, De la Cruz, M, Rahmani, R, Rahnejat, H, Howell-Smith, SJ (2014) Combined numerical and experimental investigation of the micro-hydrodynamics of chevron-based textured patterns influencing conjunctional friction of sliding contacts, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 229(4), pp.316-335, ISSN: 1350-6501. DOI: 10.1177/1350650114559996.

Mohammad pour, M, Rahmani, R, Rahnejat, H (2014) The effect of cylinder de-activation on thermo-friction characteristics of the connecting rod bearing in the new European drive cycle (NEDC), SAE Technical Paper, 2014-01-2089, 2014-01-2089, ISSN: 0148-7191. DOI: 10.4271/2014-01-2089.

Mohammadpour, M, Theodossiades, S, Rahnejat, H, Saunders, T (2014) Non-Newtonian mixed elastohydrodynamics of differential hypoid gears at high loads, Meccanica, 49(5), pp.1115-1138, ISSN: 0025-6455. DOI: 10.1007/s11012-013-9857-x.

Mohammad pour, M, Theodossiades, S, Rahnejat, H (2014) Multi-physics investigations on the dynamics of differential hypoid gears, Journal of Vibration and Acoustics, 136(4), pp.1-35, ISSN: 1048-9002.

Daliri, M, Jalali-Vahid, D, Rahnejat, H (2014) Squeeze film lubrication of coupled stress electrically conducting inertial fluids in wide parallel rectangular conjunctions subjected to a magnetic field, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 228(3), pp.288-302, ISSN: 1350-6501. DOI: 10.1177/1350650113504565.

Howell-Smith, S, Rahnejat, H, King, PD, Dowson, D (2014) Reducing in-cylinder parasitic losses through surface modification and coating, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 228(4), pp.391-402, ISSN: 0954-4070. DOI: 10.1177/0954407013512626.

Mohammad pour, M, Rahmani, R, Rahnejat, H (2014) Effect of Cylinder Deactivation on the Tribo-dynamics and Acoustic Emission of Overlay Big End Bearings, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 10.1177/1464419313519085(10.1177/1464419313519085), DOI: 10.1177/1464419313519085.

Styles, G, Rahmani, R, Rahnejat, H, Fitzsimons, B (2014) In-cycle and Life-time Friction Transience in Piston Ring–Liner Conjunction under Mixed Regime of Lubrication, International Journal of Engine Research, 10.1177/1468087413519783(10.1177/1468087413519783), DOI: 10.1177/1468087413519783.

Chong, WWF, Teodorescu, M, Rahnejat, H (2014) Mixed thermo-elastohydrodynamic cam-tappet power loss in low-speed emission cycles, International Journal of Engine Research, 15(2), pp.153-164, ISSN: 1468-0874. DOI: 10.1177/1468087412461631.

Gore, M, Theaker, M, Howell-Smith, S, Rahnejat, H, King, PD (2014) Direct measurement of piston friction of internal-combustion engines using the floating-liner principle, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 228(3), pp.344-354, ISSN: 0954-4070. DOI: 10.1177/0954407013511795.

Littlefair, B, De La Cruz, M, Mills, R, Theodossiades, S, Rahnejat, H, Dwyer-Joyce, R, Howell-Smith, S (2014) Lubrication of a flexible piston skirt conjunction subjected to thermo-elastic deformation: A combined numerical and experimental investigation, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 228(1), pp.69-81, ISSN: 1350-6501. DOI: 10.1177/1350650113499555.

Baker, CE, Rahmani, R, Theodossiades, S, Rahnejat, H, Fitzsimons, B (2014) On the effect of transient in-plane dynamics of the compression ring upon its tribological performance, Journal of Engineering for Gas Turbines and Power, 137(3), p.032512, ISSN: 0742-4795. DOI: 10.1115/1.4028496.

Mohammadpour, M, Theodossiades, S, Rahnejat, H (2014) Transient mixed non-Newtonian thermo-elastohydrodynamics of vehicle differential hypoid gears with starved partial counter-flow inlet boundary, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 0(0), pp.1-15, ISSN: 1350-6501. DOI: 10.1177/1350650114537805.

Theodossiades, S, Mohammadpour M, Rahnejat H, Saunders T, (2013) Non-Newtonian mixed elastohydrodynamics of differential hypoid gears at high loads, Meccanica, Not assigned to a Volume yet, DOI: 10.1007/s11012-013-9857-x.

Theodossiades, S, De la Cruz, M, Littlefair, B, Mills, R, Howell-Smith, S, Rahnejat, H, Dwyer-Joyce, RS (2013) Transient Tribo-Dynamics of Thermo-Elastic Compliant High-Performance Piston Skirts, Tribology Letters, 53(1), pp.51-70, ISSN: 1023-8883. DOI: 10.1007/s11249-013-0243-6.

Chong, WWF, Teodorescu, M, Rahnejat, H (2013) Nanoscale elastoplastic adhesion of wet asperities, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 227(9), pp.996-1010, ISSN: 1350-6501. DOI: 10.1177/1350650112472142.

Theodossiades, S, Mohammadpour M, Rahnejat H, Kelly P, (2013) Transmission efficiency and noise, vibration and harshness refinement of differential hypoid gear pairs, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, Not assigned to a volume yet, DOI: 10.1177/1464419313496559.

Theodossiades, S, Littlefair, B, De la Cruz, M, Mills, R, Rahnejat, H, Dwyer-Joyce, R, Howell-Smith, S (2013) Lubrication of a flexible piston skirt conjunction subjected to thermo-elastic deformation: A combined numerical and experimental investigation, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 0(0), DOI: 10.1177/1350650113499555.

Von Chappuis, H, Mavros, G, King, PD, Rahnejat, H (2013) Prediction of impulsive vehicle tyre-suspension response to abusive drive-over-kerb manoeuvres, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 227(2), pp.133-149, ISSN: 1464-4193. DOI: 10.1177/1464419312469756.

Morris, NJ, Rahmani, R, Rahnejat, H, King, P, Fitzsimons, B (2013) The influence of piston ring geometry and topography on friction, Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 227(2), pp.141-153, DOI: 10.1177/1350650112463534.

Dwyer-Joyce, R and Rahnejat, H (2013) Special Issue on Automotive Piston-Cylinder Tribology, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 227(J2), pp.99-99, ISSN: 1350-6501. DOI: 10.1177/1350650112470797.

Shahmohamadi, H, Rahmani, R, Rahnejat, H, Garner, CP, King, PD (2013) Thermo-Mixed Hydrodynamics of Piston Compression Ring Conjunction, Tribology Letters, pp.1-18, ISSN: 1023-8883. DOI: 10.1007/s11249-013-0163-5.

Mohammadpour, M, Rahnejat, H, Johns-Rahnejat, PM, Gohar, R (2013) Boundary Conditions for Elastohydrodynamics of Circular Point Contacts, Tribology Letters, pp.1-12, ISSN: 1023-8883. DOI: 10.1007/s11249-013-0249-0.

Chong, W, Teodorescu, M, Martini, A, Rahnejat, H (2012) Mechanisms of entrapment and release of fluid droplets from nano-scale surface features, American Society of Mechanical Engineers, Tribology Division, TRIB, pp.29-31, DOI: 10.1115/IJTC2012-61201.

Gore, M, Howell-Smith, SJ, King, PD, Rahnejat, H (2012) Measurement of incylinder friction using the floating liner principle, Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division, pp.901-906, ISSN: 1529-6598. DOI: 10.1115/ICES2012-81028.

Chong, WWF, Teodorescu, M, Rahnejat, H (2012) Prediction of load and shear of ultra-thin multi-species surface films, Proceedings of the ASME Design Engineering Technical Conference, 5, pp.241-246, DOI: 10.1115/DETC2012-71317.

Baker, CE, Theodossiades, S, Rahnejat, H, Fitzsimons, B (2012) Influence of in-plane dynamics of thin compression rings on friction in internal combustion engines, Journal of Engineering for Gas Turbines and Power, 134(9), ISSN: 0742-4795. DOI: 10.1115/1.4006690.

Chong, WWF, Teodorescu, M, Rahnejat, H (2012) Physio-chemical hydrodynamic mechanism underlying the formation of thin adsorbed boundary films, Faraday Discussions, 156, pp.123-136, ISSN: 1359-6640. DOI: 10.1039/c2fd00118g.

De la Cruz, M, Chong, WWF, Teodorescu, M, Theodossiades, S, Rahnejat, H (2012) Transient mixed thermo-elastohydrodynamic lubrication in multi-speed transmissions, TRIBOLOGY INTERNATIONAL, 49, pp.17-29, ISSN: 0301-679X. DOI: 10.1016/j.triboint.2011.12.006.

Rahmani, R, Theodossiades, S, Rahnejat, H, Fitzsimons, B (2012) Transient elastohydrodynamic lubrication of rough new or worn piston compression ring conjunction with an out-of-round cylinder bore, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 226(4), pp.284-305, ISSN: 1350-6501. DOI: 10.1177/1350650111431028.

Chong, WWF, Teodorescu, M, Rahnejat, H (2012) Formation of ultra-thin bi-molecular boundary adsorbed films, Journal of Physics D: Applied Physics, 45(11), ISSN: 0022-3727. DOI: 10.1088/0022-3727/45/11/115303.

Mohammadpour, M, Theodossiades, S, Rahnejat, H (2012) Elastohydrodynamic lubrication of hypoid gear pairs at high loads, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 226(J3), pp.183-198, ISSN: 1350-6501. DOI: 10.1177/1350650111431027.

Grimble, DW, Theodossiades, S, Rahnejat, H, Wilby, M (2012) Thin film tribology of pharmaceutical elastomeric seals, Applied Mathematical Modelling, ISSN: 0307-904X.

Morris, N, Rahmani, R, Rahnejat, H, King, PD, Fitzsimons, B (2012) Tribology of piston compression ring conjunction under transient thermal mixed regime of lubrication, Tribology International, ISSN: 0301-679X.

Baker, C, Rahnejat, H, Rahmani, R, Theodossiades, S (2011) Analytical evaluation of fitted piston compression ring: Modal behaviour and frictional assessment, SAE International, 2011-01-1535, ISSN: 0148-7191. DOI: 10.4271/2011-01-1535.

Chong, WWF, Teodorescu, M, Rahnejat, H (2011) Effect of lubricant molecular rheology on formation and shear of ultra-thin surface films, Journal of Physics D: Applied Physics, 44(165302), p.11, DOI: 10.1088/0022-3727/44/16/165302.

De la Cruz, M, Theodossiades, S, King, PD, Rahnejat, H (2011) Transmission drive rattle with thermo-elastohydrodynamic impacts: Numerical and experimental investigations, International Journal of Powertrains, (In press).

Koronias, G, Theodossiades, S, Rahnejat, H, Saunders, T (2011) Axle whine phenomenon in light trucks: a combined numerical and experimental investigation, Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering, 225, pp.885-894, DOI: 10.1177/0954407011401302.

Karagiannis, I, Theodossiades, S, Rahnejat, H (2011) On the dynamics of lubricated hypoid gears, Mechanism and Machine Theory, ISSN: 0094-114X.

Teodorescu, M, Brand, M, Rosen, J, Rahnejat, H (2010) The influence of post angioplasty stent implant profile on arterial wall stress, Proceedings of the ASME Design Engineering Technical Conference, 4, pp.413-420, DOI: 10.1115/DETC2010-29233.

Rahnejat, H (2010) An introduction to multi-physics multi-scale approach, pp.3-38, DOI: 10.1533/9781845699932.

Prokopovich, P, Rahnejat, H, Teodorescu, M (2010) Surface phenomena in thin-film tribology, pp.73-104, DOI: 10.1533/9781845699932.

Rahnejat, H (2010) Tribology and dynamics of engine and powertrain: Fundamentals, applications and future trends, Tribology and Dynamics of Engine and Powertrain: Fundamentals, Applications and Future Trends, DOI: 10.1533/9781845699932.

Mishra, PC and Rahnejat, H (2010) Tribology of big-end bearings, pp.635-659, DOI: 10.1533/9781845699932.

Teodorescu, M, Votsios, V, Johns-Rahnejat, PM, Rahnejat, H (2010) Fundamentals of impact dynamics of semi-infinite and layered solids, pp.105-131, DOI: 10.1533/9781845699932.

De la Cruz, M, Theodossiades, S, Rahnejat, H (2010) An investigation of manual transmission drive rattle, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multibody Dynamics, 224(K2), pp.167-181, ISSN: 1464-4193. DOI: 10.1243/14644193JMBD232.

Prokopovich, PP, Theodossiades, S, Rahnejat, H, Hodson, D (2010) Friction in Ultra-thin Conjunction of Valve Seals of Pressurised Metered Dose Inhalers, Wear, 268(4-5), pp.845-852, DOI: 10.1016/j.wear.2009.12.003.

Perera, MSM, Theodossiades, S, Rahnejat, H (2010) Elasto-multi-body Dynamics Internal Combustion Engines with Tribological Conjunctions, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multibody Dynamics, 224(3), pp.261-277, ISSN: 1464-4193. DOI: 10.1243/14644193JMBD242.

Karthikeyan, BK, Teodorescu, M, Rahnejat, H, Rothberg, SJ (2010) Thermoelastohydrodynamics of grease-lubricated concentrated point contacts, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224(3), pp.683-695, ISSN: 0954-4062. DOI: 10.1243/09544062JMES1748.

Rahnejat, H (2010) Tribology and Dynamics of Engine and Powertrain: Fundamentals, Applications and Future Trends, Tribology and Dynamics of Engine and Powertrain: Fundamentals, Applications and Future Trends, pp.1-1018, DOI: 10.1533/9781845699932.

Mishra, PC, Rahnejat, H, King, P (2010) Transient thermo-elastohydrodynamics of rough piston ring conjunction, pp.518-541, DOI: 10.1533/9781845699932.2.518.

Teodorescu, M, Votsios, V, Rahnejat, H (2010) Fundamentals of impact dynamics of semi-infinite and layered solids, pp.105-131, DOI: 10.1533/9781845699932.1.105.

Teodorescu, M, Theodossiades, S, Rahnejat, H (2010) Microengines and microgears, pp.947-959, DOI: 10.1533/9781845699932.3.947.

Rahnejat, H (2010) Preface, Tribology and Dynamics of Engine and Powertrain: Fundamentals, Applications and Future Trends, DOI: 10.1016/B978-1-84569-361-9.50037-5.

Perera, MSM, Theodossiades, S, Rahnejat, H (2010) Tribo-elasto-multi-body dynamics of a single cylinder engine under fired condition, pp.928-945e, DOI: 10.1533/9781845699932.2.928.

Prokopovich, P and Rahnejat, H (2010) Surface phenomena in thin-film tribology, pp.73-104, DOI: 10.1533/9781845699932.1.73.

Balakrishnan, S, Baker, CE, Rahnejat, H (2010) Fundamentals of hydrodynamic journal bearings: an analytical approach, pp.591-614, DOI: 10.1533/9781845699932.2.591.

Rahnejat, H, Johns Rahnejat, PM, Teodorescu, M, Votsios, V, Kushwaha, M (2009) A review of some tribo-dynamics phenomena from micro to nano-scale conjuctions, Tribology International, 42(11-12), pp.1531-1541, DOI: 10.1016/j.triboint.2009.04.044.

Rahnejat, H, Johns-Rahnejat, PM, Teodorescu, M, Votsios, V, Kushwaha, M (2009) A review of some tribo-dynamics phenomena from micro to nano-scale conjunctions Discussion, TRIBOLOGY INTERNATIONAL, 42(11-12), pp.1857-1857, ISSN: 0301-679X.

De La Cruz, M, Theodossiades, S, Rahnejat, H, Kelly, P (2009) The effect of thermo-hydrodynamics on manual automotive transmissions gear rattle, Proceedings of the ASME Design Engineering Technical Conference, 1(PARTS A AND B), pp.373-379, DOI: 10.1115/DETC2009-87226.

Prokopovich, P, Theodossiades, S, Rahnejat, H, Hodson, D (2009) Nano- and component level friction of rubber seals in dispensing devices, Proceedings of the ASME Design Engineering Technical Conference, 6, pp.339-344, DOI: 10.1115/DETC2009-86035.

Teodorescu, M, Theodossiades, S, Rahnejat, H (2009) Nano-scale impact dynamics of ultra-thin bonded layers, Proceedings of the ASME Design Engineering Technical Conference, 6, pp.367-373, DOI: 10.1115/DETC2009-87667.

Teodorescu, M, Rahnejat, H, Gohar, R, Dowson, D (2009) Harmonic decomposition analysis of contact mechanics of bonded layered elastic solids, Applied Mathematical Modelling, 33, pp.467-485, ISSN: 0307-904X. DOI: 10.1016/j.apm.2007.11.025.

Theodossiades, S, Teodorescu, M, Rahnejat, H (2009) From Multi-body to Many-body Dynamics, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223(C12), pp.2835-2847, ISSN: 0954-4062. DOI: 10.1243/09544062JMES1688.

Mishra, PC, Rahnejat, H, King, PD (2009) Tribology of the ring-bore conjunction subject to a mixed regime of lubrication, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 223, pp.987-998, DOI: 10.1243/09544062JMES1220.

Jaiswal, M, Mavros, G, Rahnejat, H, King, PD (2009) Influence of tyre transience on anti-lock braking, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, Vol. 224, pp.1-17, DOI: 10.1243/14644193JMBD225.

Rahnejat, H (2008) SPECIAL ISSUE ON NEWTONIAN MECHANICS, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, 222(4), pp.I-II, ISSN: 1464-4193. DOI: 10.1177/146441930822200401.

Rahnejat, H (2008) Physics of causality and continuum: questioning nature, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, 222(4), pp.255-264, ISSN: 1464-4193. DOI: 10.1243/14644193JMBD166.

Teodorescu, M and Rahnejat, H (2008) Newtonian mechanics in scale of minutia, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, 222(4), pp.393-405, ISSN: 1464-4193. DOI: 10.1243/14644193JMBD163.

Teodorescu, M, Theodossiades, S, Rahnejat, H (2008) Nano-scale impact characteristics of rough surfaces in humid atmosphere with full or partial sam protection, Proceedings of the ASME Design Engineering Technical Conference, 4, pp.561-568, DOI: 10.1115/DETC2008-49949.

Rahnejat, H (2008) Editorial, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 222(4), pp.i-ii, ISSN: 1464-4193. DOI: 10.1177/146441930822200401.

Rahnejat, H and Teodorescu, M (2008) Impact dynamics of rough and surface protected MEMS gears, Tribology International, pp.1-9.

Theodossiades, S, Teodorescu, M, Rahnejat, H (2008) Multi-physics analysis for MEMS meshing micro-gear contacts, Journal of Physics: Conference Series, 105(1), ISSN: 1742-6588. DOI: 10.1088/1742-6596/105/1/012002.

Teodorescu, M and Rahnejat, H (2008) Dry and wet nano-scale impact dynamics of rough surfaces with or without a self-assembled monolayer, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems, 221, pp.49-58, ISSN: 1740-3499. DOI: 10.1243/17403499JNN101.

Mishra, PC, Balakrishnan, S, Rahnejat, H (2008) Tribology of compression ring-to-cylinder contact at reversal, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 222(7), pp.815-826, ISSN: 1350-6501. DOI: 10.1243/13506501JET410.

Sharaf, AM, Mavros, G, Rahnejat, H, King, PD, Mohan, SK (2008) Optimisation of AWD off-road vehicle performance using visco-lock devices, International Journal of Heavy Vehicle Systems, 15(2/3/4), pp.188-207.

Tangasawi, O, Theodossiades, S, Rahnejat, H, Kelly, P (2008) Non-linear vibro-impact phenomenon belying transmission idle rattle, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222(10), pp.1909-1923, ISSN: 0954-4062. DOI: 10.1243/09544062JMES922.

Grimble, DW, Theodossiades, S, Rahnejat, H, Wilby, M (2008) Tribology of rough ultra-film contacts in drug delivery devices, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222(11), pp.2209-2216, ISSN: 0954-4062. DOI: 10.1243/09544062JMES1047.

Sharaf, AM, Rahnejat, H, King, PD (2008) Analysis of handling characteristics of all-wheel-drive off-road vehicles, International Journal of Heavy Vehicle Systems, 15(1), pp.89-106, DOI: 10.1504/IJHVS.2008.017986.

Teodorescu, M, Kushwaha, M, Rahnejat, H, Rothberg, SJ (2007) Multi-physics analysis of valve train systems: from system level to microscale interactions, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 221(3), pp.349-361.

Mavros, G, Rahnejat, H, King, PD (2007) A Framework for the Characterisation of the Transient Handling Responses of Non-linear Vehicles, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 221(1), pp.1-11, ISSN: 1464-4193. DOI: 10.1243/1464419JMBD65.

Azman, M, King, PD, Rahnejat, H (2007) Combined bounce, pitch, and roll dynamics of vehicles negotiating single speed bump events, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 221(1), pp.33-40, ISSN: 1464-4193. DOI: 10.1243/1464419JMBD55.

Tangasawi, O, Theodossiades, S, Rahnejat, H (2007) Lightly loaded lubricated impacts: Idle gear rattle, Journal of Sound and Vibration, p.13, ISSN: 0022-460X. DOI: 10.1016/j.jsv.2007.03.077.

Tangasawi, OAM, Theodossiades, S, Rahnejat, H (2007) Gear teeth impacts in hydrodynamic conjunctions promoting idle gear rattle, Journal of Sound and Vibration, 303(3-5), pp.632-658, ISSN: 0022-460X. DOI: 10.1016/j.jsv.2007.01.034.

Perera, MSM, Theodossiades, S, Rahnejat, H (2007) A multi-physics multi-scale approach in engine design analysis, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 221(3), pp.335-348, ISSN: 1464-4193. DOI: 10.1243/14644193JMBD78.

Hussain, K, Rahnejat, H, Hegazy, S (2007) Transient vehicle handling analysis with aerodynamic interactions, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 221(1), pp.21-32, ISSN: 1464-4193. DOI: 10.1243/1464419JMBD41.

Gnanakumarr, MM, King, PD, Theodossiades, S, Rahnejat, H (2006) Methods of palliation for high frequency elasto-acoustic response of truck drivetrain systems, International Journal of Heavy Vehicle Systems, 13(4), pp.253-262, ISSN: 1744-232X. DOI: 10.1504/IJHVS.2006.010582.

Theodossiades, S, Gnanakumarr, MM, Rahnejat, H, Kelly, P (2006) Effect of a dual-mass flywheel on the impact-induced noise in vehicular powertrain systems, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of automobile Engineering, 220(6), pp.747-761, ISSN: 0954-4070. DOI: 10.1243/09544070JAUTO55.

Balakrishnan, S, King, PD, Howell Smith, S, Rahnejat, H (2006) The measurement of liner-piston skirt oil film thickness by an ultrasonic means, SAE Transactions: Journal of Engines, Paper No 2006-01-0648, 115(3), pp.348-353.

Teodorescu, M and Rahnejat, H (2006) Mathematical modelling of layered contact mechanics of cam-tappet conjunction, Applied Mathematical Modelling, p.18, ISSN: 0307-904X. DOI: 10.1016/j.apm.2006.10.019.

Teodorescu, M, Votsios, V, Rahnejat, H, Taraza, D (2006) Jounce and Impact in Cam-Tappet Conjunction Induced by the Elastodynamics of Valve train System, Meccanica, 41, pp.157-171.

Rahnejat, H, Balakrishnan, S, King, PD, Howell Smith, S (2006) In-cylinder friction reduction using a surface finish optimization technique, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 220(D9), pp.1309-1318, ISSN: 0954-4070. DOI: 10.1243/09544070JAUTO282.

Teodorescu, M, Balakrishnan, S, Rahnejat, H (2006) Physics of ultra-thin surface films on molecularly smooth surfaces, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems, 220(1), pp.7-19, ISSN: 1740-3499. DOI: 10.1243/17403499JNN59.

Tangasawi, O, Theodossiades, S, Rahnejat, H, Kelly, P (2006) Gear teeth impacts in hydrodynamic conjunctions: Idle rattle, IPDS 2006: Integrated Powertrain and Driveline Systems 2006, pp.19-28, DOI: 10.1533/9781845692032.1.19.

Theodossiades, S, Gnanakumarr, MM, Rahnejat, H (2005) Root cause identification and physics of impact-induced driveline noise in vehicular powertrain systems, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219(11), pp.1303-1319, ISSN: 0954-4070. DOI: 10.1243/095440705X34937.

Mavros, G, Rahnejat, H, King, PD (2005) Transient analysis of tyre friction generation using a brush model with interconnected viscoelastic bristles, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 219(3), pp.275-283, ISSN: 1464-4193. DOI: 10.1243/146441905X9908.

Rahnejat, H (2005) Commemorating Einstein's special theory of relativity, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, 219(2), pp.I-II, ISSN: 1464-4193. DOI: 10.1177/146441930521900201.

Rahnejat, H (2005) Editorial: Commemorating Einstein's Special Theory of Relativity, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 219(2), pp.i-ii, ISSN: 1464-4193. DOI: 10.1177/146441930521900201.

Teodorescu, M, Votsios, V, Rahnejat, H (2005) Multiphysics analysis for the determination of valvetrain characteristics, Proceedings of the IMechE Part D: Journal of Automobile Engineering, 219, pp.1109-1117.

Rahnejat, H (2005) Special relativity: interpretation and implications for space-time geometry, Proceedings of IMechE Part K: Journal of Multi-body Dynamics, 219, pp.133-146.

Balakrishnan, S and Rahnejat, H (2005) Isothermal transient analysis of pistion skirt-to-cylinder wall contacts under combined axial, lateral and tilting motion, Journal of Physics D: Applied Physics, 38, pp.787-799, ISSN: 0022-3727.

Mavros, G, Rahnejat, H, King, PD (2005) Analysis of the transient handling properties of a tyre, based on the coupling of a flexible carcass-belt model with a separate tread incorporating transient viscoelastic frictional properties, Vehicle System Dynamics, 43(s1), pp.199-208, ISSN: 0042-3114. DOI: 10.1080/00423110500140658.

Balakrishnan, S and Rahnejat, H (2005) Investigation of reciprocating conformal contact of piston skirt-to-surface modified cylinder liner in high performance engines, Proceedings of the IMechE, Part C: Journal of Mechanical Engineering Science, 219, pp.1235-1247.

Gnanakumarr, MM, Theodossiades, S, Rahnejat, H, Menday, M (2005) Impact-induced vibration in vehicular driveline systems: theoretical and experimental investigations, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 219(1), pp.1-12, ISSN: 1464-4193. DOI: 10.1243/1464419053577626.

Teodorescu, M, Balakrishnan, S, Rahnejat, H (2005) Integrated tribological analysis within a multi- physics approach to system dynamics, Tribology and Interface Engineering Series, 48, pp.725-737, ISSN: 1572-3364. DOI: 10.1016/s0167-8922(05)80074-4.

Coy, RC, Taylor, RI, Maillat, M, Martin, JM, Olver, A, Drouvin, Y, Honda, F, Tung, SC, Rahnejat, H, Vignali, JM, Gurovich, D, Glavatskih, S, Liu, Y, Stoimenov, BL, Hooke, C, Dwyer-Joyce, R, Wilson, W, Dowson, D, Evans, HP, Nakahara, T, Lubrecht, A, Messé, S, Dahm, K, Devaux, N, Poll, G, Kernizan, CF, Priest, M, Li, L, Soom, A, Mordukhovich, G, Torrance, A, Popovici, G, Ohmae, N, Fouvry, S, Ville, F, Robbe-Valloire, F, Tomanik, E (2004) Written discussion - Contributions, Tribology Series, 43, pp.827-857, ISSN: 0167-8922.

Teodorescu, M, Kushwaha, M, Rahnejat, H, Taraza, D (2004) Elastodynamic transient analysis of a four-cylinder valvetrain system with camshaft flexibility, Proceedings of IMechE Part K: J. Multi-body Dynamics, 219, pp.13-25, ISSN: 1464-4193.

Azman, M, Rahnejat, H, King, PD, Gordon, TJ (2004) Influence of anti-dive and anti-squat geometry in combined vehicle bounce and pitch dynamics, Proceedings of the Institution of Mechanical Engineers Part K: Journal of Multi-body Dynamics, 218(4), pp.231-242, ISSN: 1464-4193. DOI: 10.1243/1464419043541464.

Theodossiades, S, Gnanakumarr, MM, Rahnejat, H, Menday, M (2004) Mode identification in impact-induced high-frequency vehicular driveline vibrations using an elasto-multi-body dynamics approach, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 218(2), pp.81-94, ISSN: 1464-4193. DOI: 10.1243/146441904323074549.

Kushwaha, M and Rahnejat, H (2004) Transient concentrated finite line roller-to-race contact under combined entraining, tilting and squeeze film motions, Journal of Physics D: Applied Physics, 37, pp.2018-2034, ISSN: 0022-3727.

Mavros, G, Rahnejat, H, King, PD (2004) Investigation of steady-state tyre force and moment generation under combined longitudinal and lateral slip conditions, Vehicle System Dynamics, Supplement, 41, pp.351-360, ISSN: 0042-3114.

Luo, ACJ, Hamidzadeh, HR, Rahnejat, H (2004) Dynamics, acoustics, and simulation: Introduction, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, 117, p.305.

Al-Samieh, MF, Rahnejat, H, Dowson, D (2004) Molecular-level tribology under transient conditions, Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2004, 1, pp.669-678, DOI: 10.1115/esda2004-58568.

Teodorescu, M, Rahnejat, H, Gohar, R (2004) Harmonic analysis to determine contact characteristics of concentrated counterformal contacts, Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2004, 1, pp.663-668, DOI: 10.1115/esda2004-58544.

Rahnejat, H (2003) Editorial, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 217(1), pp.i-i, ISSN: 1464-4193. DOI: 10.1177/146441930321700101.

Vafaei, S and Rahnejat, H (2003) Indicated Repeatable Runout with Wavelet Decomposition (IRR-WD) for Effective Determination of Bearing Induced Vibration, Journal of Sound & Vibration, 260, pp.67-82.

Rahnejat, H (2003) Untitled, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, 217(1), pp.I-I, ISSN: 1464-4193. DOI: 10.1177/146441930321700101.

Rahnejat, H (2003) Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics - Editorial, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 217(1), ISSN: 1464-4193.

Luo, ACJ, Hamidzadeh, HR, Rahnejat, H (2003) Vibration and Control of Mechanical Systems: Introduction, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, 116(2), p.741, ISSN: 1521-4613.

Teodorescu, M, Kushwaha, M, Rahnejat, H, Taraza, D (2003) Transient analysis of a line of valves with camshaft flexibility and valve-spring surge effects, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, 116(2), pp.1091-1097, ISSN: 1521-4613. DOI: 10.1115/IMECE2003-43819.

Gnanakumarr, M, Theodossiades, S, Rahnejat, H, Menday, M (2003) Elasto-multibody dynamic simulation of impact induced high frequency vehicular driveline vibrations, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, 116(2), pp.1099-1111, ISSN: 1521-4613. DOI: 10.1115/IMECE2003-43820.

Kushwaha, M and Rahnejat, H (2002) Transient elastohydrodynamic lubrication of finite line conjunction of cam to follower concentrated contact, Journal of Physics D: Applied Physics, 35, pp.2872-2890.

Al Samieh, MF and Rahnejat, H (2002) Physics of lubricated impact of a sphere on a plate in a narrow continuum to gaps of molecular dimensions, Journal of Physics D: Applied Physics, 35(18), pp.2311-2326, ISSN: 1361-6463. DOI: 10.1088/0022-3727/35/18/313.

Al-Samieh, MF and Rahnejat, H (2002) Physics of lubricated impact of a sphere on a plate in a narrow continuum to gaps of molecular dimensions, JOURNAL OF PHYSICS D-APPLIED PHYSICS, 35(18), pp.2311-2326, ISSN: 0022-3727. DOI: 10.1088/0022-3727/35/18/313.

Vafaei, S, Rahnejat, H, Aini, R (2002) Vibration monitoring of high speed spindles using spectral analysis techniques, Int. Journal of Machine Tools & Manufacture, 42, pp.1223-1234.

Farshidianfar, A, Ebrahimi, M, Rahnejat, H, Menday, MT (2002) High Frequency Torsional Vibration of Vehicular Driveline Systems in Clonk, Heavy Vehicle Systems, A Series of the Int. J. of Vehicle Design, 9(No. 2), pp.127-149.

Farshidianfar, A, Ebrahimi, M, Rahnejat, H, Menday, MT, Moavenian, M (2002) Optimization of the high-frequency torsional vibration of vehicle driveline systems using genetic algorithms, Proc. Inst. Mech. Engrs, J Multi-body Dynamics, 216(Part K), pp.249-262.

Aini, R, Rahnejat, H, Gohar, R (2002) Vibration Modelling of Rotating Spindles Supported by Lubricated Bearings, Trans. ASME, Journal of Tribology, 124(1), pp.158-165.

Kushwaha, M, Gupta, S, Kelly, P, Rahnejat, H (2002) Elasto-multi-body dynamics of a multicylinder internal combustion engine, Proc. Inst. Mech. Engrs. (Special Issue Paper) Multi-body Dynamics, 216(Part K), pp.281-293.

Kushwaha, M, Rahnejat, H, Gohar, R (2002) Aligned and misaligned contacts of rollers to races in elastohydrodynamic finite line conjunctions, Proc. Inst. Mech. Engrs. Part C: Journal Mechanical Engineering Science, Vol. 216, pp.1051-1070.

Kushwaha, M, Gupta, S, Kelly, P, Rahnejat, H (2002) Elasto-multi-body dynamics of a multicylinder internal combustion engine, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, 216(4), pp.281-293, ISSN: 1464-4193. DOI: 10.1243/146441902320992374.

Gupta, S, Kelly, P, Rahnejat, H (2001) Elasto-multi-body dynamics of multi-cylinder internal combustion engine, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, 111, pp.273-281, ISSN: 1521-4613.

Hamidzadeh, HR, Rahnejat, H, Luo, ACJ (2001) American Society of Mechanical Engineers, Design Engineering Division (Publication) DE: Foreword, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, 111, ISSN: 1521-4613.

Hoffmann, F and Rahnejat, H (2001) Constrained multi-body dynamic analysis of shaft and bearing systems, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, 111, pp.77-85, ISSN: 1521-4613.

Hoffmann, F and Rahnejat, H (2001) Constrained multi-body dynamic analysis of shaft and bearing systems, ASME International Mechanical Engineering Congress and Exposition, Proceedings, 2, pp.79-87.

Hamidzadeh, HR, Rahnejat, H, Luo, ACJ (2001) Vibration and control of mechanical systems - 2001: Foreword, ASME International Mechanical Engineering Congress and Exposition, Proceedings, 2.

Al Samieh, M and Rahnejat, H (2001) Ultra-thin Lubricating Films Under Transient Conditions, Journal of Physics D: Applied Physics, 34(17), pp.2610-2621, ISSN: 1361-6463. DOI: 10.1088/0022-3727/34/17/307.

Abd AlSamieh, MF and Rahnejat, H (2001) Nano-lubricant Film Formation Due to Combined Elastohydrodynamic and Surface Force Action Under Isothermal Conditions, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215(9), pp.1019-1029, ISSN: 0954-4062. DOI: 10.1243/0954406011524388.

Rahnejat, H (2001) Editorial, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 215(1), pp.i-i, ISSN: 1464-4193. DOI: 10.1177/146441930121500101.

Vafaei, S, Menday, M, Rahnejat, H (2001) Transient high-frequency elasto-acoustic response of a vehicular drivetrain to sudden throttle demand, Proc. Instn. Mech. Engrs, 215(Part K), pp.35-52.

Rahnejat, H (2001) Relativity: 300 years from a principle to reality, Proc. Instn. Mech. Engrs, 215(Part K), pp.1-6.

Centea, D, Rahnejat, H, Menday, MT (2001) Non-linear multi-body dynamic analysis for the study of clutch torsional vibrations (judder), Applied Mathematical Modelling, 25, pp.177-192, ISSN: 0307-904X.

Jalali Vahid, D, Rahnejat, H, Jin, ZM, Dowson, D (2001) Transient analysis of isothermal elastohydrodynamic circular point contacts, Proc. Instn. Mech. Engrs, 215(Part C - C02199), pp.1159-1173.

Rahnejat, H (2001) Marking the millennium, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, 215(1), pp.I-I, ISSN: 1464-4193. DOI: 10.1177/146441930121500101.

Vafaei, S, Menday, M, Rahnejat, H (2001) Transient high-frequency elasto-acoustic response of a vehicular drivetrain to sudden throttle demand, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, 215(1), pp.35-52, ISSN: 1464-4193. DOI: 10.1243/1464419011544330.

Kushwaha, M, Rahnejat, H, Jin, ZM (2000) Valve-train Dynamics: A Simplified Tribo-elasto-multi-body Analysis, Proceedings of the Institution of Mechanical Engineers Part K: Journal of Multi-body Dynamics, 214, pp.95-110, ISSN: 1464-4193.

Jalali Vahid, D, Rahnejat, H, Gohar, R, Jin, ZM (2000) Prediction of Oil-Film Thickness and Shape in Elliptical Point Contacts Under Combined Rolling and Sliding Motion, Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 214, pp.427-437, ISSN: 1350-6501.

Rahnejat, H (2000) Multi-body dynamics: historical evolution and application, The Millennium Paper, Proc. Instn. Mech. Engrs. Part C, Journal of Mechanical Engineering Science, The Special Millennium Issue, 214(C1), pp.149-173.

Hegazy, S, Rahnejat, H, Hussain, K (2000) Multi-body dynamics in full-vehicle handling analysis under transient manoeuvre, Vehicle System Dynamics, 34, pp.1-24.

Jalali Vahid, D, Kushwaha, M, Rahnejat, H (2000) Transient concentrated lubricated contact dynamics, International Journal of Gearing and Transmissions, (Issue 3), pp.76-82.

Lynagh, N, Rahnejat, H, Ebrahimi, M, Aini, R (2000) Bearing induced vibration in precision high speed routing spindles, International Journal of Machine Tools & Manufacture, 40, pp.561-577.

Razmi, J, Rahnejat, H, Khan, MK (2000) The new concept of manufacturing 'DNA' within an analytic hierarchy process-driven expert system, European Journal of Innovation Management, 3(4), pp.199-211, ISSN: 1460-1060.

Rahnejat, H (2000) Multi-body dynamics: historical evolution and application, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 214(1), pp.149-173, ISSN: 0954-4062. DOI: 10.1243/0954406001522886.

Centea, D, Rahnejat, H, Menday, MT (1999) The Influence of the Interface Coefficient of Friction Upon the Propensity to Judder in Automotive Clutches, Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering, 213, pp.245-258, ISSN: 0954-4070.

Hegazy, S, Rahnejat, H, Hussain, K (1999) Multi-body dynamics in full-vehicle handling analysis, Proc. Instn. Mech. Engrs, Journal of Multi-body Dynamics, 213(Part K), pp.19-31.

Nagieh, GR, Rahnejat, H, Jin, ZM (1999) Characteristics of frictionless contact of bonded elastic and viscoelastic layered solids, WEAR, 232, pp.243-249.

Menday, MT, Rahnejat, H, Ebrahimi, M (1999) Clonk: an onomatopoeic response in torsional impact of automotive drivelines, Proc. Instn. Mech. Engrs, Journal of Automobile Engineering, 213(Part D), pp.349-357.

Hegazy, S, Rahnejat, H, Hussain, K (1999) Multi-body dynamics in full-vehicle handling analysis, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 213(1), pp.19-31, ISSN: 1464-4193. DOI: 10.1243/1464419991544027.

Ginn, DM, Jones, DV, Rahnejat, H, Zairi, M (1998) The “QFD/FMEA interface”, European Journal of Innovation Management, 1(1), pp.7-20, ISSN: 1460-1060. DOI: 10.1108/14601069810198448.

Jalali Vahid, D, Rahnejat, H, Gohar, R, Jin, ZM (1998) Comparison Between Experiments and Numerical Solutions for Isothermal Elastohydrodynamic Point Contacts, Journal of the Institute of Physics Part D: Applied Physics, 31, pp.2725-2732, ISSN: 0022-3727.

Jalali Vahid, D, Rahnejat, H, Jin, ZM (1998) Elastohydrodynamic Solution for Concentrated Elliptical Point Contact of Machine Elements Under Combined Entraining and Squeeze-Film Motion, Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 212, pp.401-411, ISSN: 1350-6501.

Naghieh, GR, Jin, ZM, Rahnejat, H (1998) Contact Characteristics of Viscoelastic Bonded Layers, Applied Mathematical Modelling, 22, pp.569-581, ISSN: 0307-904X.

Razmi, J, Rahnejat, H, Khan, MK (1998) Use of analytic hierarchy process approach in classification of push-pull systems for production planning, International Journal of Operations & Production Management, 18(11/12), pp.1134-1151.

Ginn, DM, Jones, DV, Rahnejat, H, Zairi, M (1998) The QFD/FMEA Interface, European Journal of Innovation Management, 1(1), pp.7-20, ISSN: 0144-3577.

Razmi, J, Rahnejat, H, Khan, MK (1998) Use of analytic hierarchy process approach in classification of push, pull and hybrid push-pull systems for production planning, INTERNATIONAL JOURNAL OF OPERATIONS & PRODUCTION MANAGEMENT, 18(11-12), pp.1134-+, ISSN: 0144-3577. DOI: 10.1108/01443579810231705.

Boysal, A and Rahnejat, H (1997) Torsional vibration analysis of a multi-body single cylinder internal combustion engine model, J.App.Math.Modelling, 21, pp.481-493.

Mehdian, M and Rahnejat, H (1996) Blood flow measurement using a highly filled carbon polymer sandwich sensor and an elasto-pseudo compressible vascular flow, Proc. Inst. Mech. Engrs. Part H: J. Engng. in Medicine, 210, pp.289-296.

Aini, R, Rahnejat, H, Gohar, R (1995) An experimental investigation into bearing-induced spindle vibration, Proc. Instn. Mech. Engrs. Part C: J. Mech. Engng. Sci, 209, pp.107-114.

Mehdian, M and Rahnejat, H (1994) A dextrous anthropomorphic hand for robotic and prosthetic application, Robotica, 12, pp.455-463.

Mehdian, M, Johns Rahnejat, PM, Rahnejat, H (1993) Elastostatic contact imaging for a mechanoreceptive tactile device, Robotica, 11, pp.329-337.

Mehdian, M and Rahnejat, H (1992) An intelligent part sorting robot in unstructured manufacturing environment, Robotica, 10, pp.155-164.

Aini, R, Rahnejat, H, Gohar, R (1990) A five degrees of freedom analysis of vibrations in precision spindles, Int. J. Mach. Tools, Design & Manuf, 30(No 1), pp.1-18.

Mehdigoli, H, Rahnejat, H, Gohar, R (1990) Vibration response of wavy surfaced disc in elastohydrodynamic rolling contact, Wear, 139, pp.1-15.

Mehdian, M, Hall, AR, Rahnejat, H (1990) Object recognition with tactile sensing using an intelligent local-feature-focus, Int. J. Adv. Manuf. Tech, 5, pp.165-174.

Mehdigoli, H, Rahnejat, H, Gohar, R (1990) Vibration response of wavy surfaced disc in elastohydrodynamic rolling contact, Wear, 139(1), pp.1-15, ISSN: 0043-1648. DOI: 10.1016/0043-1648(90)90206-P.

Mehdian, M and Rahnejat, H (1989) A sensory gripper using tactile sensors for object recognition, orientation control and stable manipulation, Trans. IEEE, Sys. Man. & Cyber, 30(No 1), pp.1250-1261.

Chaharbaghi, K, Davies, BL, Rahnejat, H (1989) Intelligent policy-making for computer-integrated manufacturing systems, Exploitable UK Research for Manufacturing Industry, Peter Peregrinus Ltd, Chapter 2, pp.11-19.

Shams, I, Rahnejat, H, Greening, D (1988) A Non-Contact Opto-Electronic Sensing Device for Precision Linear and Angular Positioning of Robotic Manipulators, Proceedings of the Institution of Mechanical Engineers, Part B: Management and engineering manufacture, 202(4), pp.261-265, ISSN: 0263-7146. DOI: 10.1243/pime_proc_1988_202_076_02.

Rahnejat, H and Bera, H (1988) Sensors, Special purpose, Encyclopaedia of Robotics, R.C. Dorf (Editor), John Wiley & Sons Inc, pp.1536-1544.

Benhadj, R, Sadeque, S, Rahnejat, H (1988) A knowledge-based system for sensor interaction and real-time component control, The International Journal of Advanced Manufacturing Technology, 3(1), pp.77-102, ISSN: 0268-3768. DOI: 10.1007/bf02601503.

Benhadj, R, Sadeque, S, Rahnejat, H (1988) A knowledge-based system for sensor interaction and real-time computer control, Int. J. Adv. Manuf. Tech, 3(No 1), pp.77-102.

Chaharbaghi, K, Rahnejat, H, Davies, BL, Dobbs, PJ (1988) An expert system approach to discrete-change simulation, Int. J. Opers. & Prod. Manag, 8(No 2), pp.14-34.

Matsubara, M, Rahnejat, H, Gohar, R (1988) Computational modelling of precision spindles supported by ball bearings, Int. J. Mach. Tools, Design & Manuf, 28(No 4), pp.429-442.

Shams, L, Rahnejat, H, Greening, D (1988) A non-contact opto-electronic sensing device for precision linear and angular positioning of robotic manipulators, Proc. Inst. Mech. Engrs. Part B: J.Manuf, 20(B4), pp.261-265.

MATSUBARA, M, RAHNEJAT, H, GOHAR, R (1988) COMPUTATIONAL MODELING OF PRECISION SPINDLES SUPPORTED BY BALL-BEARINGS, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 28(4), pp.429-442, ISSN: 0890-6955. DOI: 10.1016/0890-6955(88)90056-9.

Benhadj, R, Rahnejat, H, Safa, MMA (1987) A high resolution pneumatic proximity to tactile sensing device, Int. J. Adv. Manuf. Tech, 2(No 3), pp.59-72.

Mehdian, M and Rahnejat, H (1987) A tactile sensor with automatic learning capability for industrial parts inspection, Int. J. Adv. Manuf. Tech, 2(No 4), pp.11-26.

Foroughi, F, Rahnejat, H, Bera, H (1987) Tactile sensors for robot handling, Proc. Inst. Mech. Engrs, Part B: J. Manuf, 201(B1), pp.51-58.

Chaharbaghi, K, Davies, BL, Rahnejat, H (1986) APPLICATION OF SIMULATION IN PLANNING THE DESIGN OF FLEXIBLE ASSEMBLY SYSTEMS, I Mech E Conference Publications (Institution of Mechanical Engineers), pp.95-110, ISSN: 0144-0799.

Rahnejat, H (1986) Simulating for 'resource optimisation' in robot-assisted automatic assembly, Proc. Instn. Mech. Engrs, Part B, J. Manuf, 200(B3), pp.181-186.

Rahnejat, H (1986) Simulation Aids Design for Flexible Automation, Int. J. Adv. Manuf. Tech, 1(No. 2), pp.91-108.

Rezvani, AR and Rahnejat, H (1986) Reliability analysis of a flexible machining cell, Int. J. Adv. Manuf. Tech, 1(No. 4), pp.55-68.

Mejtsky, GJ and Rahnejat, H (1985) Introducing GPSL: A flexible manufacturing simulator, CAD, 17(No. 5), pp.219-224.

Rahnejat, H (1985) Computational Modelling of Problems in Contact Dynamics, Engng. Analysis, Computational Mechanics, 2(No. 4), pp.192-197.

Rahnejat, H and Gohar, R (1985) The Vibrations of Radial Ball Bearings, Proc. Instn. Mech. Engrs. Part C: J. Mech. Engng. Sci, 199(C3), pp.181-193.

RAHNEJAT, H (1985) COMPUTATIONAL MODELING OF PROBLEMS IN CONTACT DYNAMICS, ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS, 2(4), pp.192-197, ISSN: 0955-7997. DOI: 10.1016/0955-7997(85)90003-7.

Rahnejat, H and Gohar, R (1985) The vibrations of radial ball bearings, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 199(3), pp.181-193, ISSN: 0954-4062. DOI: 10.1243/PIME_PROC_1985_199_113_02.

Rahnejat, H and Gohar, R (1979) Design of profiled taper roller bearings, Tribology International, 11, pp.269-275.



Conferences

Dolatabadi, N, Rahmani, R, Rahnejat, H (2020) Prediction of acoustic emissions of turbocharger bearings. In 11th International Styrian Noise, Vibration & Harshness Congress: The European Automotive Noise Conference; SAE Technical Paper, Graz, Austria. DOI: 10.4271/2020-01-1504.

Gkinis, T, Rahmani, R, Rahnejat, H (2020) On predicting automotive clutch torsional vibrations. In 11th International Styrian Noise, Vibration & Harshness Congress: The European Automotive Noise Conference; SAE Technical Paper, Graz, Austria. DOI: 10.4271/2020-01-1508.

Humphrey, E, Morris, N, Rahmani, R, Rahnejat, H (2020) Multiscale analysis of lubricant-surface combinations for reduced frictional losses within high performance automotive transmissions [Abstract]. In STEM for Britain 2020. Exhibition of posters by early-career research scientists, engineers and mathematicians, Houses of Parliament, Westminster, UK [Online conference].

Humphrey, E, Morris, N, Rahmani, R, Rahnejat, H (2019) Tribological performance of surface-lubricant systems for automotive transmissions [Abstract]. In 7th European Conference on Tribology (EcoTrib 2019), Vienna, Austria.

Umer, J, Morris, N, Leighton, M, Rahmani, R, Howell-Smith, SJ, Rahnejat, H (2018) Characterisation of automotive bore material and coatings using atomic force microscopy [Abstract]. In TriboUK2018, University of Sheffield.

Umer, J, Leighton, M, Morris, N, Rahmani, R, Rahnejat, H, Balakrishnan, S (2018) Tribological investigation of organic and inorganic friction modifiers with varying quantities of dispersants [Abstract]. In Leeds Lyon 2018, University of Leeds.

Martinez-Insua-Rodriguez, A, Rahnejat, H, Smith, MB, Rahmani, R, Morris, N, Umer, J, Howell-Smith, SJ (2018) Study of the lubricant-surface system for in-cylinder applications [Abstract]. In TriboUK2016, Univeristy of Leeds.

Kozuch, E, Nomikos, P, Morris, N, Rahmani, R, Rahnejat, H (2018) Performance evaluation of radial shaft seals of automotive transmission systems [Abstract]. In 24th International Conference on Fluid Sealing (FS 2018), Manchester.

Humphrey, E, Morris, N, Rahmani, R, Rahnejat, H (2018) Lubricant-surface system characterisation for high performance transmissions [abstract]. In 45th Leeds-Lyon Symposium on Tribology: Smart Tribology Systems, University of Leeds.

Kozuch, E, Nomikos, P, Morris, N, Rahmani, R, Rahnejat, H (2018) Shaft surface as a factor affecting lip seal performance. In TriboUK 2018, University of Sheffield.

Forder, M, Umer, J, Morris, N, King, P, Howell-Smith, SJ, Rahnejat, H (2018) Lubricant base stock-surface interaction. In 3rd International Brazilian Conference on Tribology-TriboBR 2018, Florinopolis Brazil.

Umer, J, Morris, N, Rahmani, R, Rahnejat, H, Balakrishnan, S (2018) Interaction of dispersants with anti-wear and friction modifiers in contacts representative of piston-ring liner interface [Abstract]. In 3rd International Conference on Tribology-TriboBR 2018, Florianopolis, Brazil.

Sivayogan, G, Rahmani, R, Rahnejat, H (2018) Prediction of friction in EHL contacts for drivetrain applications. In 4th Biennial International Conference on Powertrain Modelling and Control (PMC 2018), Loughborough University.

Nomikos, P, Kozuch, E, Morris, N, Rahmani, R, Rahnejat, H (2018) Measurement of vibrations affecting the power transmission seals. In 4th Biennial International Conference on Powertrain Modelling and Control (PMC 2018), Loughborough University.

Kozuch, E, Nomikos, P, Rahmani, R, Morris, N, Rahnejat, H (2018) Evaluating leakage from radial lip seals affected by bearing area of shaft topography. In 20th ISC – International Sealing Conference Stuttgart 2018, University of Stuttgart.

Alevras, P, Theodossiades, S, Rahnejat, H, Saunders, T (2017) Parametric resonance of a nonlinear energy harvester for torsional vibrations. In European Nonlinear Dynamics Conference, Budapest, Hungary.

Bewsher, R, Mohammadpour, M, Rahnejat, H, Offner, G (2017) Influence of boundary conditions on starvation of piston ring conjunction. In World Tribology Congress 2017, Beijing, China.

Bewsher, R, Hildyard, R, Mohammadpour, M, Leighton, M, Rahnejat, H, Knaus, O, Offner, G (2017) Results of measured data from atomic force microscope on ring pack performance. In 2017 International Conference on Advaced Vehicle Powertrains, Hangzhou, China.

Humphrey, E, Morris, N, Rahmani, R, Rahnejat, H, Rapson, G (2017) A test procedure to investigate lubricant-surface combination for high performance racing transmissions. In World Tribology Congress 2017, Beijing, China.

Umer, J, Morris, N, Leighton, M, Rahmani, R, Rahnejat, H, Howell-Smith, SJ, Balakrishnan, S (2017) Nano-scale investigation of frictional characteristics of tribo-films in sliding contacts of representative in-cylinder conditions. In 6th World Tribology Congress, Beijing, China.

Leighton, M, Davies, JA, Morris, N, Rahnejat, H, Trimmer, G (2017) A combined numerical and experimental investigation of disengaged wet clutch system power loss. In World Tribology Congress 2017, Bejing.

Sivayogan, G, Mohammadpour, M, Rahnejat, H, Sopouch, M, Offner, G (2017) Elastohydrodynamic analysis of hypoid gear contacts with variable geometry and kinematics. In World Tribology Congress, Beijing, China.

Oglieve, C, Sivayogan, G, Mohammadpour, M, Rahnejat, H (2017) Lubricated Loaded Tooth Contact Analysis (LLTCA) for Spur Gear Pairs. In International Conference on Advance Vehicle Powertrains, Hangzhou, China.

Fatourehchi, E, Mohammadpour, M, Theodossiades, S, Rahnejat, H (2017) Thermal modelling of mixed non-Newtonian thermo-elastohydrodynamics in dry sump lubrication systems. In The 6th World Tribology Congress, Beijing, China.

Alevras, P, Theodossiades, S, Rahnejat, H, Saunders, T (2017) Torsional vibration energy harvesting through transverse vibrations of a passively tuned beam. In Dynamical Systems – Theory and Applications, Lodz, Poland.

Alevras, P, Theodossiades, S, Rahnejat, H, Saunders, T (2017) Parametric resonance of a nonlinear energy harvester for torsional vibrations. In 9th European Nonlinear Dynamics Conference, Budapest, Hungary.

Bewsher, R, Mohammadpour, M, Rahmani, R, Rahnejat, H, Offner, G (2017) A study into the effects of cylinder de-activation on the tribological performance of piston ring-liner conjunction. In TriboUK 2017, Imperial College.

Sivayogan, G, Mohammadpour, M, Rahmani, R, Rahnejat, H, Offner, G, Sopouch, M (2017) Elastohydrodynamic analysis in a multi-physics finite element environment. In TriboUK 2017, Imperial College London.

Fatourehchi, E, Elisaus, V, Mohammadpour, M, Theodossiades, S, Rahnejat, H (2016) Efficiency and durability predictions of high performance racing transmissions. In 9th International Styrian Noise, Vibration & Harshness Congress: The European Automotive Noise Conference, Graz, Austria. DOI: 10.4271/2016-01-1852.

Turnbull, R, Bewsher, R, Mohammadpour, M, Rahmani, R, Rahnejat, H, Offner, G (2016) Elastodynamics of the compression ring for evaluation of ring-liner conformance. In TriboUK 2016, University of Leeds.

Bewsher, R, Turnbull, R, Mohammadpour, M, Rahmani, R, Rahnejat, H, Offner, G (2016) A 2D hydrodynamic solver of the Reynolds equation for the piston ring-liner conjunction. In TriboUK 2016, University of Leeds.

Turnbull, R, Bewsher, R, Mohammadpour, M, Rahmani, R, Rahnejat, H (2016) Tribodynamics of the piston compression ring conjunction. In Powertrain Modelling and Control, Loughborough University.

Savva, K, Haris, A, Motato, E, Mohammadpour, M, Theodossiades, S, Rahnejat, H, Kelly, P, Vakakis, AF, Bergman, LA, McFarland, DM (2016) Damping effects introduced by a nonlinear vibration absorber in automotive drivelines at idle engine speeds. In 9th International Styrian Noise, Vibration & Harshness Congress: The European Automotive Noise Conference, Graz, Austria. DOI: 10.4271/2016-01-1765.

Fatourehchi, E, Mohammadpour, M, King, P, Rahnejat, H, Trimmer, G, Womersley, B (2016) Effects of gear modification and surface finish on planetary gear systems efficiency. In TriboUK 2016, University of Leeds.

Paouris, L, Theodossiades, S, Rahmani, R, Rahnejat, H, Hunt, G, Barton, W (2016) Effect of lubricant rheology on hypoid gear pair efficiency. In 3rd Biennial International Conference on Powertrain Modelling and Control (PMC 2016), Loughborough University.

Humphrey, E, Gkinis, T, Morris, N, Leighton, M, Rahmani, R, Rahnejat, H (2016) Clutch lining frictional characteristics under thermal tribodynamic conditions. In 3rd Biennial International Conference on Powertrain Modelling and Control (PMC 2016), Loughborough University.

Leighton, M, Morris, N, Rahmani, R, Trimmer, G, King, P, Rahnejat, H (2016) A combined numerical and experimental investigation of disengaged wet brake plate power loss. In 3rd Biennial International Conference on Powertrain Modelling and Control (PMC 2016), Loughborough University.

Harris, A, Motato, E, Mohammadpour, M, Theodossiades, S, Rahnejat, H, Kelly, P, O'Mahony, M, Struve, B (2016) Concept selection for clutch nonlinear absorber using PUGH matrix. In PMC2016, Powertrain Modelling and Control, Loughborough University.

Oglieve, C, Mohammadpour, M, Rahnejat, H (2016) Optimisation of vehicle transmission and shifting strategy for minimum fuel consumption under EU and US legislated drive cycles. In PMC2016, Powertrain Modelling and Control, Loughborough University.

Fatourehchi, E, Mohammadpour, M, King, PD, Rahnejat, H, Trimmer, G, Womersley, B, Williams, A (2016) Effect of tooth microgeometry profile modification on the efficiency of planetary hub gears. In PMC2016, Powertrain Modelling and Control, Loughborough University.

Huerta, IM, Mohammadpour, M, Rahnejat, H (2016) Analysis of lubricated contact in continuously variable transmissions (CVT). In PMC2016, Powertrain Modelling and Control, Loughborough University.

Elisaus, V, Mohammadpour, M, Theodossiades, S, Rahnejat, H (2016) Tribological investigation of truncated thermo-elastohydrodynamic elliptical point contacts in high performance transmissions. In PMC2016, Powertrain Modelling and Control, Loughborough University.

Morris, N, Suzuki, H, Shahmohamadi, H, Dwyer-Joyce, RS, Rahnejat, H (2016) Combined numerical and experimental investigation of surface textured journal bearings [Abstract]. In Leeds-Lyon Symposium, Leeds Trinity University.

Morris, N, Leighton, M, Rahmani, R, Rahnejat, H (2016) Hydrodynamic flow analysis for determination of the location of surface texture features. In 43rd Leeds-Lyon Symposium on Tribology, University of Leeds.

St-John, J, Alevras, P, Theodossiades, S, Rahnejat, H, Kelly, P (2016) Nonlinear energy harvesting from base excitation in automotive applications. In 3rd Biennial International Conference on Powertrain Modelling and Control Testing, Mapping and Calibration, Loughborough.

Gkinis, T, Rahmani, R, Rahnejat, H (2016) Influence of clutch lining frictional characteristics upon cold and hot take-up judder. In 3rd Biennial International Conference on Powertrain Modelling and Control (PMC 2016), Loughborough University.

Umer, J, Rahnejat, H, Rahmani, R, King, P, Martinez-Insua-Rodriguez, A, Morris, N (2016) Lubricant-surface system mitigating in-cylinder friction. In TriboUK 2016, University of Leeds, UK.

Shahmohamadi, H, Rahmani, R, Rahnejat, H, Garner, C, Balodimos, N (2016) Thermo-hydrodynamic analysis of nano-lubricant flow with carbon nano-particles in tribological contacts. In 43rd Leeds-Lyon Symposium on Tribology, Leeds.

Gkinis, T, Rahmani, R, Rahnejat, H (2016) Effects of sliding velocity and clamp load on the coefficient of friction in the study of self-exited vibrations (judder) in automotive clutches [abstract]. In 13th TriboUK 2016, University of Leeds.

Paouris, L, Theodossiades, S, De la Cruz, M, Rahnejat, H, Kidson, A, Hunt, G, Barton, W (2015) Isothermal elastohydrodynamic lubrication analysis of heavily loaded hypoid gear pairs. In TriboUK 2015, Loughborough University.

Chong, WWF and Rahnejat, H (2015) Atomic scale friction in the function of modified Eyring activation energies. In , Key Engineering Materials, pp.3-7, DOI: 10.4028/www.scientific.net/KEM.642.3.

Paouris, L, De la Cruz, M, Theodossiades, S, Rahnejat, H, Kidson, A, Hunt, G, Barton, W (2015) Film thickness investigation in heavily loaded hypoid gear pair elastohydrodynamic conjunctions. In 70th STLE Annual Meeting & Exhibition, Dallas, TX, USA.

Paouris, L, Theodossiades, S, Rahnejat, H, Kidson, A, Hunt, G, Barton, W (2015) Nonlinear dynamics of an automotive differential hypoid gear pair. In ASME 2015 International Design Engineering Technical Conferences & Computer and Information in Engineering Conference, Boston, Massachusetts, USA,ISBN: 9780791857205. DOI: 10.1115/DETC2015-47324.

Leighton, M, Morris, N, Rahmani, R, Rahnejat, H (2015) Asperity contact modelling for measured surfaces. In 11th International Tribology Conference, presented by The South African Institute of Tribology (SAIT), Pretoria, South Africa.

Morris, N, Shahmohamadi, H, Rahmani, R, Rahnejat, H (2015) A CFD study comparing surface texture features on stationary and entraining surfaces. In 42nd Leeds-Lyon Symposium on Tribology, Lyon, France.

Leighton, M, Morris, N, Rahmani, R, Rahnejat, H (2015) An averaged approach to asperity contact interactions for non-gaussian lubricated surfaces. In 42nd Leeds-Lyon Symposium on Tribology, Lyon, France.

Shahmohamadi, H, Rahmani, R, Rahnejat, H, Garner, C (2015) CFD modeling of cavitation flow in journal bearing lubrication. In , Lugano, Switzerland,ISBN: 9788890767036.

Paouris, L, Theodossiades, S, Rahmani, R, Rahnejat, H, Hunt, G (2015) A hypoid gear pair tribo-dynamic model taking into account the rheological behaviour of fully formulated gear lubricants. In , Lodz, Poland.

Theodossiades, S, De la Cruz, M, Rahnejat, H (2015) Prediction of airborne radiated noise from lightly loaded lubricated meshing gear teeth. In , Applied Acoustics. DOI: 10.1016/j.apacoust.2015.06.014.

Theodossiades, S, Rahnejat, , Mohammad pour, (2014) Dynamic and efficiency modelling of the planetary gear sets for hybrid powertrains. In Powertrain Modelling and Control (PMC 2014) conference, Bradford, UK.

Theodossiades, S, Mohammad pour, rahnejat, (2014) Tribodynamics of differential hypoid gears. In International Gear Conference, Lyon, France.

Mohammad pour, M, Rahmani, R, Rahnejat, H (2014) The effect of cylinder de-activation on thermo-friction characteristics of the connecting rod bearing in the New European Drive Cycle (NEDC). In 8th International Styrian Noise, Vibration & Harshness Congress: The European Automotive Noise Conference, SAE Technical Series: 2014-01-2089, Graz, Austria.

Baker, C, Rahmani, R, Karagiannis, I, Theodossiades, S, Rahnejat, H, Frendt, A (2014) Effect of compression ring elastodynamics behaviour upon blowby and power loss. In , SAE Technical Papers. DOI: 10.4271/2014-01-1669.

Morris, N, Leighton, M, Rahmani, R, De-La-Cruz, M, Rahnejat, H (2014) Friction reduction in piston ring cylinder liner contact using textured surfaces. In LUBMAT 2014, Manchester, UK.,ISBN: 978-1-909755-02-4.

Leighton, M, Morris, N, Rahmani, R, Rahnejat, H (2014) The influence of large scale surface roughness on flow factors. In , Sinaia, Romania, pp.217-223.

Theodossiades, S, Rahnejat H, Mohammadpour M, (2013) Differential hypoid gears: the necessity for a multi-physics approach. In NAFEMS European Conference "Coupled MBS-FE Applications: A New Trend in Simulation", Frankfurt, Germany.

Shahmohamadi, H, Rahmani, R, Rahnejat, H, King, PD, Garner, CP (2013) Cavitating Flow in Engine Piston Ring-Cylinder Liner Conjunction. In ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE2013-62395, San Diego, California, USA.

Mohammad pour, M, Theodossiades, S, Rahnejat, H (2013) Tribo-dynamics of differential hypoid gear pairs. In PMC 2012, Powertrain Modelling and Conference, Bradford, UK, pp.1-10.

Mohammad pour, M, Theodossiades, S, Rahnejat, H (2013) TRIBO-DYNAMICS OF DIFFERENTIAL HYPOID GEARS. In Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2013, Portland, Oregon, USA. DOI: 10.1115/DETC2013-12890.

Morris, NJ, Rahnejat, H, Rahmani, R, King, P, Leighton, M, De la Cruz, M (2013) A Numerical and Experimental Approach in Understanding the Performance of Textured Surfaces in Sliding Contacts. In World Tribology Congress, Torino, Italy, pp.1-4.

Theodossiades, S, Rahnejat H, Mohammadpour M, (2013) Interactions between Tribology and Dynamics of Automotive Differential Hypoid Gears Considering Thermal Non-Newtonian Mixed Lubrication Effects. In World Tribology Congress, Torino, Italy.

Theodossiades, S, Littlefair B, De la Cruz M, Mills R, Rahnejat H, Dwyer-Joyce R, (2013) Film thickness predictions and measurements of a flexible piston skirt. In World Tribology Congress 2013, Torino, Italy.

Theodossiades, S, Rahnejat H, Mohammadpour M, (2013) Tribo-dynamics of differential hypoid gears. In ASME IDETC 2013 Conference, Portland, Oregon, USA.

Shahmohamadi, H, Rahmani, R, Rahnejat, H, Garner, CP, King, PD (2013) CFD Modelling of Cavitation Phenomenon in Piston Ring/Cylinder Liner Conjunction. In 5th World Tribology Congress (WTC 2013), Tornio, Italy.

De La Cruz, M, Gore, M, Morris, N, Rahnejat, H (2012) The role of laser surface textured patterns on friction in reciprocating contacts. In , American Society of Mechanical Engineers, Tribology Division, TRIB, pp.71-73, ISBN: 9780791845080. DOI: 10.1115/IJTC2012-61149.

Baker, CE, Theodossiades, S, Rahnejat, H (2012) Friction under transient mixed regime of lubrication in conjunction of an elastic ring within a real cylinder. In , Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division, pp.667-672, ISBN: 9780791844663. DOI: 10.1115/ICES2012-81045.

Karagiannis, I, Theodossiades, S, Rahnejat, H (2012) The Effect of vehicle cruising speed on the dynamics of automotive hypoid gears. In , SAE Technical Papers. DOI: 10.4271/2012-01-1543.

Mohammad-Pour, M, Rahnejat, H, Theodossiades, S (2012) Elastohydrodynamics of hypoid gears in axle whine conditions. In , SAE Technical Papers. DOI: 10.4271/2012-01-1538.

Gore, M, Howell-Smith, SJ, King, PD, Rahnejat, H (Accepted for publication) Measurement of in-cylinder friction using the floating liner principle. In ICES 2012 (Internal Combustion Engine Division) Spring Technical Conference, Proceedings of the ASME 2012 Internal Combustion Engine Division Spring Technical Conference, Torino, Italy.

Littlefair, B, Howell-Smith, SJ, Rahnejat, H, Theodossiades, S (2012) Assessment of thermo-structural effects on ehl piston skirt lubrication. In ICES 2012 Internal Combustion Engine Division Spring Technical Conference, Proceedings of the ASME 2012 Internal Combustion Engine Division Spring Technical Conference, Torino, Italy.

Morris, NJ, Rahnejat, H, Rahmani, R, King, PD, Fitzsimons, B (2012) Performance Evaluation of Piston Compression Ring through Accelerated Wear in Engine Tests. In ASME Internal Combustion Engine Division Spring Technical Conference, ASME 2012 International Engine Division Spring Technical Conference, Turin, pp.1003-1008, ISBN: 978-0-7918-4466-3. DOI: 10.1115/ICES2012-81201.

Theaker, M, Rahmani, R, Rahnejat, H (2012) Prediction of Ring-Bore Conformance and Contact Condition and Experimental Validation. In ASME 2012 International Engine Division Spring Technical Conference, Torino, Italy, pp.885-892, ISBN: 978-0-7918-4466-3. DOI: 10.1115/ICES2012-81021.

Turturro, A, Rahmani, R, Rahnejat, H, Delprete, C, Magro, L (2012) Assessment of Friction for Cam-Roller Follower Valve Train System Subjected to Mixed Non-Newtonian Regime of Lubrication. In ASME 2012 International Engine Division Spring Technical Conference, Torino, Italy, pp.917-923, ISBN: 978-0-7918-4466-3. DOI: 10.1115/ICES2012-81050.

Styles, G, Rahmani, R, Rahnejat, H, Fitzsimons, B (2012) Assessment of Asperity Coefficient of Friction for Various Coating Materials used in Piston Ring/Liner Conjunction using AFM. In 15th Nordic Symposium on Tribology (NORDTRIB 2012), Trondheim, Norway.

Rahmani, R, Styles, G, Rahnejat, H (2012) Meniscus Formation in the Piston Compression Ring-Cylinder Liner Inlet Zone. In ASME 2012 Internal Combustion Engine Division Fall Technical Conference, Vancouver, BC, Canada, pp.935-939, ISBN: 978-0-7918-5509-6. DOI: 10.1115/ICEF2012-92123.

Baker, CE, Rahmani, R, Theodossiades, S, Rahnejat, H, Fitzsimons, B (2011) Thermo-elastohydrodynamics of a rough piston compression ring-to-cylinder bore conjunction (Engine & drivetrain II). In , Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2011, pp.182-188, ISBN: 9781618391056.

Morris, N, Rahmani, R, Rahnejat, H, King, PD, Fitzsimons, B (2011) Tribology of Piston Compression Ring Conjunction under Transient Thermal Mixed Regime of Lubrication. In 38th Leeds-Lyon Symposium on Tribology, Lyon, France.

Morris, N, Rahmani, R, Rahnejat, H (2011) Tribology of Partial Pad Journal Bearings with Textured Surfaces. In 3rd European Conference on Tribology, Vienna, Austria, pp.645-650.

Littlefair, B, Howell Smith, S, Theodossiades, S, King, PD, Rahnejat, H (2011) Tribology of Piston Skirt Conjunction. In 3rd European Conference on Tribology, Vienna, Austria, pp.739-744.

De La Cruz, M, Theodossiades, S, Rahnejat, H (2011) Transmission Rattle: An Air and Structure-borne Phenomenon (refereed extended abstract). In Proceedings of the 7th European Nonlinear Oscillations Conference (ENOC-2011), Rome, Italy, 2p.

Karagiannis, I, Theodossiades, S, Rahnejat, H (2011) Tribodynamics of hypoid gear pairs. In Proceedings of the 201 STLE Annual Meeting and Exhibition, Atlanda, Georgia, USA.

Perera, M, Theodossiades, S, Rahnejat, H, Kelly, P (2011) Drive rattle elastodynamic response of manual automotive transmissions. In SAE 2011 Noise and Vibration Conference and Exhibition, Grand Rapids, Michigan, USA.

Theodossiades, S, Rahnejat, H, Hodson, D (2011) Tribological Studies in Pressurized Metered Dose Inhalers. In Respiratory Drug Delivery (RDD) 2011, Berlin, Germany.

Baker, CE, Rahmani, R, Theodossiades, S, Rahnejat, H (2011) Analytical evaluation of fitted piston compression ring modal behaviour and frictional assessment. In SAE 2011 Noise and Vibration Conference and Exhibition, SAE Paper No. 2011-01-1535, Grand Rapids, Michigan, USA.

Chong, WWF, Teodorescu, M, Rahnejat, H (2011) INFLUENCE OF ULTRA-THIN FILM TRIBOLOGY ON HARD DISK AREAL STORAGE CAPACITY. In STLE/ASME International Joint Tribology Conference, PROCEEDINGS OF THE STLE/ASME INTERNATIONAL JOINT TRIBOLOGY CONFERENCE, 2010, San Francisco, CA, pp.17-19, ISBN: 978-0-7918-4419-9.

Teodorescu, M, Rahnejat, H, Brand, M, Rosen, J (2011) POST-ANGIOPLASTIC CONTACT MECHANICS WITH DIFFERENT LEVELS OF ARTHEROSCLEROTIC PLAQUE. In STLE/ASME International Joint Tribology Conference, PROCEEDINGS OF THE STLE/ASME INTERNATIONAL JOINT TRIBOLOGY CONFERENCE, 2010, San Francisco, CA, pp.41-43, ISBN: 978-0-7918-4419-9.

Morris, N, Rahmani, R, Rahnejat, H, King, PD (2011) Optimizing Piston Ring Topography to Minimize Running-in Wear in Mixed Regime of Lubrication. In ASME/STLE 2011 International Joint Tribology Conference (IJTC2011), Paper No. IJTC2011-61090, Los Angeles, California, USA.

Chong, WWF, Teodorescu, M, Rahnejat, H (2010) Rupture and reformation of ultra-thin surface films. In , Proceedings of the ASME Design Engineering Technical Conference, pp.401-407, ISBN: 9780791844120. DOI: 10.1115/DETC2010-28427.

De la Cruz, M, Theodossiades, S, Rahnejat, H (2010) Analysis of non-linear impact dynamics in automotive transmissions - gear rattle. In The Seventh International Conference on Engineering Computational Technology, Valencia, Spain.

Koronias, G, Theodossiades, S, Rahnejat, H, Saunders, T (2010) Vibrations of differential units in light trucks. In The 1st International Conference on Multibody System Dynamics, Lappeenranta, p.6.

Perera, MSM, De la Cruz, M, Theodossiades, S, Rahnejat, H, Kelly, P (2010) Elastodynamic response of automotive transmissions to impact induced vibrations. In The 1st International Conference on Multibody System Dynamics, Lappeenranta, Finland, p.6.

Karagiannis, I, Theodossiades, S, Rahnejat, H (2010) Dynamics of Hypoid Gears in Automotive Differential Units (refereed abstract). In 2nd International Conference on Vibro-Impact Systems, Sanya, P.R. China, 1p.

Grimble, D, Theodossiades, S, Rahnejat, H, Hodson, D (2010) Predicion of Tribological Phenomena in Drug Delivery Devices. In Drug Delivery to the Lungs 21 (DDL21) The Aerosol Society, Edinburgh, UK, pp.272-275.

De la Cruz, M, Theodossiades, S, Rahnejat, H, Kelly, P (2010) THE EFFECT OF THERMO-HYDRODYNAMICS ON MANUAL AUTOMOTIVE TRANSMISSIONS GEAR RATTLE. In ASME International Design Engineering Technical Conferences/Computers and Information in Engineering Conference, PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, VOL 1, PTS A AND B, San Diego, CA, pp.373-379, ISBN: 978-0-7918-4898-2.

Teodorescu, M, Theodossiades, S, Rahnejat, H (2009) Prediction for MEMS micro-gears frictional impact degradation. In World Tribology Congress, Kyoto, Japan, p.6.

De la Cruz, M, Theodossiades, S, Rahnejat, H, Kelly, P (2009) Numerical and experimental analysis of manual transmissions - gear ratle. In SAE Proceedings, SAE 2009 World Congress, Detroit, USA, p.6.

Perera, MSM, Theodossiades, S, Rahnejat, H (2009) Effect of offsetting crankshaft on engine efficiency. In 12th EAEC European Automotive Congress, EAEC 2009, Bratislava, p.6.

De la Cruz, M, Theodossiades, S, Rahnejat, H (2009) The effect of thermo-hydrodynamics on manual automotive transmissions gear rattle. In 22nd Biennial Conference on Mechanical Vibration and Noise, ASME International Design Engineering Technical Conference and Computers and Information in Engineering Conference, San Diego, USA, p.6.

De la Cruz, M, Theodossiades, S, Rahnejat, H, King, PD (2009) Transient lubricant conjunctional behaviour in transmission rattle. In 2nd European Conference on Tribology, ECOTRIB 2009, Pisa, Italy, p.6.

Prokopovich, PP, Theodossiades, S, Rahnejat, H, Hodson, H (2009) Nano- and component level friction of rubber seals in dispensing devices. In 3rd International Conference on Micro- and Nanosystems, ASME International Design Engineering Technical Conference & Computers and Information in Engineering Conference, San Diego, USA, p.6.

Teodorescu, M, Theodossiades, S, Rahnejat, H (2009) Nano-scale Impact dynamics of ultra-thin bonded layers. In 3rd International Conference on Micro- and Nanosystems, ASME International Design Engineering Technical Conference & Computers and Information in Engineering Conference, San Diego, p.6.

Teodorescu, M, Majidi, C, Rahnejat, H, Fearing, RS (2009) EFFECT OF SURFACE ROUGHNESS ON ADHESION AND FRICTION OF MICROFIBERS IN SIDE CONTACT. In STLE/ASME 2008 International Joint Tribology Conference, PROCEEDINGS OF THE STLE/ASME INTERNATIONAL JOINT TRIBOLOGY CONFERENCE 2008, Miami, FL, pp.79-+, ISBN: 978-0-7918-4336-9.

Teodorescu, M and Rahnejat, H (2009) NANO-SCALE CONTACT MODEL FOR MICROFIBER TIP ATTACHMENT, DETACHMENT AND FRICTION. In STLE/ASME 2008 International Joint Tribology Conference, PROCEEDINGS OF THE STLE/ASME INTERNATIONAL JOINT TRIBOLOGY CONFERENCE 2008, Miami, FL, pp.83-+, ISBN: 978-0-7918-4336-9.

Teodorescu, M, Theodossiades, S, Rahnejat, H (2008) Nano-scale impact characteristics of rough surfaces in humid atmosphere with full or partial sam protection. In Proceedings of the 2nd International Conference on Micro- and Nanosystems (MNS), IDETC2008, Paper no DETC2008-49949, New York City, New York, USA, pp.1-8.

Grimble, D, Theodossiades, S, Rahnejat, H, Wilby, M (2008) Tribology of elastomeric seals in drug delivery devices. In Institution of Mechanical Engineers Event, Proceedings of the 2008 Focus on Reciprocating Seals - Exploring the latest developments and their applications, London, UK, p.6.

Tangasawi, O, Theodossiades, S, Rahnejat, H, Kelly, P (2008) Simulating idle gear rattle conditions in manual automotive transmissions. In Proceedings of the 2008 NAFEMS UK, Cheltenham, UK, p.6.

De la Cruz, M, Theodossiades, S, Rahnejat, H, Kelly, P (2008) Impact dynamic behaviour of meshing loaded teeth in transmission drive rattle. In (ENOC-2008), Proceedings of the Sixth EUROMECH Nonlinear Dynamics Conference, St Petersburg, Russia, p.6.

Theodossiades, S, Teodorescu, M, Rahnejat, H (2008) Impact dynamics of MEMS gear teeth. In ENOC-2008, Proceedings of the Sixth EUROMECH Nonlinear Dynamics Conference, St Petersburg, Russia, p.6.

Koronias, G, Theodossiades, S, Rahnejat, H, Saunders, T (2008) Rear axle whine investigations in light trucks (refereed abstract). In 4th International Conference on Advanced Computational Methods in Engineering (ACOMEN), Leige, Belgium, 1p.

Teodorescu, M, Theodossiades, S, Rahnejat, H (2008) Influence of SAM Degradation on MEMS-Gear Dynamics (referred abstract). In Proceedings of the 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, Italy, 1p.

Al Hossein, S, Mavros, G, Rahnejat, H, King, PD, Mohan, SK (2007) Directional Control and Stability of AWD Off-Road Vehicles fitted with Visco-Lock Devices. In IAVSD 20th Symposium, Proceedings IAVSD 2007, Berkeley, California, USA, pp.1-19.

Jaiswal, M, Rahnejat, H, King, PD, Mavros, G (2007) A multi-body dynamics approach for the study of critical handling manoeuvres on surfaces with uneven friction. In Bottasso, L, C, Masarati, P, Trainelli, eds, L (ed) Proceedings of the ECCOMAS Thematic Conference, Multibody Dynamics 2007, Milano, Italy, pp.1-19.

Teodorescu, M, Theodossiades, S, Rahnejat, H (2007) Multi-physics approach to design analysis of powertrain sub-systems. In Proceedings of the 12th IFToMM World Congress, Besan\,{c}on, France.

Theodossiades, S, Rahnejat, H, Kelly, P (2007) On the effect of cardboard liners on impact-induced high frequency vehicular driveline vibrations. In Proceedings of the 2007 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 21st Biennial Conference on Mechanical Vibration and Noise, Paper No VIB18-35692, Las Vegas, USA, p.6.

Grimble, D, Theodossiades, S, Rahnejat, H, Wilby, M (2007) An Understanding of the Dynamic Interactions between Elastomeric Components and Formulation in Pressurized Metered Dose Inhalers (refereed abstract). In Investing in Medical Nanotechnologies II, Royal College of Surgeons of England, London, UK, 1p.

Al Hossein, S, Mavros, G, King, PD, Rahnejat, H (2006) Multi-physics Modelling Approach in All-terrain Vehicle Dynamics. In Proceedings of the ASME International Mechanical Engineering Congress & Exposition (reviewed and accepted), Chicago, Illinois, USA, tba.

Sharaf, AM, Mavros, G, Rahnejat, H, King, PD (2006) Multi-Physics Modelling Approach in All Terrain Vehicle Longitudinal Dynamics, Paper IMECE2006-13578. In Proceedings of the 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE06, Chicago, Illinois, USA, p.10.

Tangasawi, O, Theodossiades, S, Rahnejat, H (2006) Lightly loaded lubricated impacts: idle gear rattle (refereed abstract). In Proceedings of the 1st International Conference on Vibro-Impact Systems, Loughborough, UK, 1p.

Theodossiades, S, Tangasawi, O, Rahnejat, H, Kelly, P (2006) The effect of hydrodynamic conjunctions on gear teeth oscillations. In Proceedings of the 2nd International Conference on Nonlinear Normal Modes and Localization in Vibrating Systems (NNMS), Samos, Greece, p.6.

Dwyer Joyce, RS, Green, DA, Balakrishnan, S, Harper, P, Lewis, R, Howell Smith, S, King, PD, Rahnejat, H (2006) The Measurement of Liner-Piston Skirt Oil Film Thickness by an Ultrasonic Means, Paper No P5-06P-596. In Proceedings of the SAE Congress, Detroit, Michigan, USA, p.6.

Tangasawi, O, Theodossiades, S, Rahnejat, H, Kelly, P (2006) Gear Teeth Impacts in Hydrodynamic Conjunctions: Idle Rattle. In Proceedings of the IMechE Integrated Powertrain & Driveline Systems Conference, Dunton, UK, p.10.

Theodossiades, S, Teodorescu, M, Rahnejat, H (2006) Multi-physics analysis for MEMS meshing micro-gear contacts (referred abstract). In Proceedings of Engineering and Physics - Synergy for Success, London, UK, 1p.

Tangasawi, OAM, Theodossiades, S, Rahnejat, H (2006) Gear Teeth Oscillations in Manual Transmissions Promoting Idle Gear Rattle. In Proceedings of the BGA GEARS 2006 Technical Awareness Seminar, Manchester, UK, p.14.

Tangasawi, OAM, Theodossiades, S, Rahnejat, H, Kelly, P (2006) Theoretical and Experimental Analysis of Automotive Idle Gears Rattle (refereed abstract). In Proceedings of the 6th European Solid Mechanics Conference, ESMC, Budapest, Hungary, 1p.

Sharaf, AM, Rahnejat, H, Mavros, G, King, PD (2006) Multi-physics modelling approach in all terrain vehicle longitudinal dynamics. In , American Society of Mechanical Engineers, Design Engineering Division (Publication) DE,ISBN: 9780791837900.

Tangasawi, O, Theodossiades, S, Rahnejat, H, Kelly, P (2005) Gear teeth impact dynamics in manual transmissions promoting idle rattle. In Proceedings of the 5th EUROMECH Nonlinear Dynamics Conference, Eindhoven,ISBN: 90-386-2667-3.

Perera, M, Theodossiades, S, Rahnejat, H (2005) Determination of Engine Roughness Using Multi-Physics Numerical Predications. In 20th Biennial Conference on Mechanical Vibration and Noise, Proceedings of the 2005 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Long Beach, USA.

Teodorescu, M, Kushwaha, M, Rahnejat, H, Rothberg, S (2005) Integrated multi-body dynamic and cam-tappet contact analysis for a single cylinder IC engine. In 20th Biennial Conference on Mechanical Vibration and Noise, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Vol 1, Pts A-C, Long Beach, CA, pp.849-857, ISBN: 0-7918-4738-1.

Teodorescu, M, Rahnejat, H, Howell Smith, S, Dowson, D (2004) Tribological analysis within a multi-physics framework. In Proceedings of the 31st Leeds-Lyon Symposium, Leeds, UK.

Jackson, MR, Rahnejat, H, Parkin, RM, Rothberg, SJ, Kerr, D, Bamforth, PE, Hynek, P, Brown, N, Shi, F, Bouazza Marouf, K (2004) Intelligent Machinery. In Proceedings of the IMS International Forum 2004 - Global Challenges in Manufacturing, Cernobbio, Italy, pp.432-440, ISBN: 88-901168-9-7.

Teodorescu, M, Rahnejat, H, Rothberg, SJ (2004) Multi-body Analysis and Measurement of Valve Train Motions. In Rahnejat, H and eds, SJR (ed) Multi-body Dynamics: Monitoring and Simulation Techniques - III, Loughborough, UK, pp.273-284, ISBN: 1-86058-463-2.

Theodossiades, S, Gnanakumarr, MM, Rahnejat, H, Menday, M (2004) Combined Multi-body Dynamics, Structural Modal Analysis, and Boundary Element Method to Predict Multi-physics Interactions of Driveline Clonk. In Rahnejat, H and eds, SJR (ed) Multi-body Dynamics: Monitoring and Simulation Techniques - III, Loughborough, UK, pp.373-387, ISBN: 1-86058-463-2.

Kushwaha, M and Rahnejat, H (2004) Determination of the Effect of Contact Kinematics of Squeeze Caving Phenomenon through General Covariance. In Rahnejat, H and Rothberg, SJ (ed) Multi-body Dynamics: Monitoring and Simulation Techniques III, Loughborough, UK, pp.507-519, ISBN: 1-86058-463-2.

Teodorescu, M, Theodossiades, S, Rahnejat, H (2004) Multi-body Dynamics: An evolution from constrained inertial dynamics to a multi-physics interactive framework. In Proceedings of the ASI on Engineering-Design: Eco-design, Technologies and Green Energy, Brasov, pp.273-298, ISBN: 1-4020-2932-2.

Rahnejat, H (2004) Foreword - a tribute to Jean D'Alembert and Albert Einstein Geometrical interpretation of motion: an ironic legacy of apparently irreconcilable atomistic and continuum philosophies. In Rahnejat, H and Rothberg, S (ed) 3rd International Symposium on Multi-Body Dynamics -Monitoring and Simulation Techniques, MULTIBODY DYNAMICS: MONITORING AND SIMULATION TECHNIQUES - III, Loughborough Univ, Loughborough, ENGLAND, pp.XIII-XIV, ISBN: 1-86058-463-2.

Balakrishnan, S, Theodossiades, S, Howell-Smith, S, Rahnejat, H (2004) Conrod big-end friction characterisation under transient lubricated condition. In FISITA 2004 World Automotive Congress, Barcelona, Spain, pp.-.

Balakrishnan, S, Rahnejat, H, Howell Smith, S, Dowson, D (2003) Transient phenomenon of piston and ring pack lubrication at reversal. In Proceedings of the 30th Leeds-Lyon Symposium, Lyon, France.

Balakrishnan, S and Rahnejat, H (2003) Impact dynamic analysis of piston against cylinder bore in internal combustion due to secondary motions. In Proceedings of EUROMECH 5, Thessaloniki, Greece.

Gnanakumarr, MM, Theodossiades, S, Rahnejat, H, Menday, M (2003) Impact Induced High Frequency Vibration of Vehicular Driveline Systems with Elasto-Acoustic Waves Coincidence. In Abstract Proceedings of the 5th Euromech Solid Mechanics Conference, Thessaloniki, Greece.

Theodossiades, S, Gnanakumarr, MM, Rahnejat, H, Menday, M (2003) Elasto-Multibody Dynamic Simulation of Impact Induced High Frequency Vehicular Driveline Vibrations. In Proceedings of the ASME International Mechanical Engineering Congress and R&D Expo, Washington, USA, p.13.

Al Samieh, MF, Rahnejat, H, Dowson, D (2002) Boundary Changes Between Rigid and Elastic Isco-Viscous Lubrication Due to Structural Forces in Ultra-Thin Conjunctions. In 3rd AIMETA Int. Tribology Conference, AITC 2002, Vietri Sul Mare, Salerno, Italy, p.11.

Gupta, S, Rahnejat, H, Dowson, D (2002) Thin Shell Engine Bearings Under Transient Elastrohydrodynamic Regime of Lubrication. In 3rd AIMETA International Tribology Conference, AITC 2002, Vietri Sul Mare, Salerno, Italy, p.10.

Balakrishnan, S and Rahnejat, H (2002) Combined secondary piston dynamics and transient elastohydrodynamic analysis of piston skirt to cylinder contact conjunctions. In Proceedings of the AIMETA Symposium, Salerno, Italy.

Gnanakumarr, MM, Theodossiades, S, Rahnejat, H (2002) The Tribo-Contact Dynamics Phenomenon in Torsional Impact of Loose Gears - Promoting Gear Rattle. In Proceedings of the Society of Automotive Engineers (SAE)-ATT Congress, Paris, France.

Balakrishnan, S and Rahnejat, H (2002) Transient Elastohydrodynamic Lubrication of Piston Skirt to Cylinder Liner Under Combined Reciprocating and Slapping Motions. In 3rd AIMETA Int. Tribology Conference, Proceedings of AITC 2002, Vietri Sul Mare, Salerno, Italy, p.9.

Hoffman, F and Rahnejat, H (2001) Constrained multi-body dynamic analysis of shaft and bearing systems. In Proceedings of 2001 ASME International Mechanical Engineering Congress and Exposition, New York, USA, pp.1-9.

Gupta, S, Kelly, P, Rahnejat, H (2001) Elasto-Multi-Body Dynamics of Multi-Cylinder Internal Combustion Engine. In Proceedings of the 2001 ASME International Mechanical Engineering Congress and Exposition, New York, USA, pp.9DE-23234.

Rahnejat, H (2001) Multi-body Dynamics Analysis: Linking the Past to the Future. In Proc. AVL List Conf. Advanced Simulation Technologies (AST), Graz, Austria, pp.1-19.

Al Samieh, MF, Balakrishnan, S, Rahnejat, H (2001) Multi-physics of lubricated impact dynamics problem. In Proceedings of the EUROMECH 425 Conference, Aberdeen, UK.

Aleyaasin, M, Ebrahimi, M, Rahnejat, H (2000) A mathematical model for a 6-3 Stewart Platform as a parallel machine. In Proc. of Parallel Kinematic Machines International Conference 2000, Ann Arbor, Michigan, USA, pp.224-235.

Menday, M and Rahnejat, H (2000) Spectral resolution of highly coupled non-linear drivetrain elasto-acoustic vibration. In Proc. ISATA-2000, Electric/Powertrain, Dublin, pp.495-503.

Vafaei, S, Rahnejat, H, Ebrahimi, M, Menday, MT (2000) Monitoring of impact induced high-frequency vibrations in vehicular drivetrain systems. In Proc. Int. Conf. Gearing, Transmissions and Mechanical Systems, Nottingham, pp.853-860.

Hegazy, S, Rahnejat, H, Hussain, K (2000) Dynamic tyre testing for vehicle handling studies. In Eds, HREA (ed) Proc. of Multi-body Dynamics: Monitoring and Simulation Techniques II, Bradford, pp.135-154.

Arrundale, D, Gupta, S, Rahnejat, H (2000) Multi-body dynamics for the assessment of engine induced inertial imbalance and torsional-deflection vibration. In Eds, HREA (ed) Proc. of Multi-body Dynamics: Monitoring and Simulation Techniques II, Bradford, pp.207-234.

Jalali Vahid, D, Kushwaha, M, Rahnejat, H, Jin, ZM (2000) Transient elastohydrodynamic analysis in concentrated contact conjunctions. In Proc. Int. Conf. Gearing, Transmissions and Mechanical Systems, Nottingham, England, pp.749-759.

Farshidianfar, A, Ebrahimi, M, Rahnejat, H, Menday, M (2000) Low-frequency torsional vibration of vehicular driveline systems in shuffle. In Rahnejat, H, Ebrahimi, M, Whalley, R (ed) 2nd International Symposium on Multi-Body Dynamics: Monitoring and Simulation Techniques (MBD-MST 2000), MULTI-BODY DYNAMICS: MONITORING AND SIMULATION TECHNIQUES II, BRADFORD, ENGLAND, pp.269-282, ISBN: 1-86058-258-3.

Rahnejat, H (2000) Foreword - A tribute to Daniel Bernoulli (1700-1782) mathematical-physical renaissance in mechanics of motion. In Rahnejat, H, Ebrahimi, M, Whalley, R (ed) 2nd International Symposium on Multi-Body Dynamics: Monitoring and Simulation Techniques (MBD-MST 2000), MULTI-BODY DYNAMICS: MONITORING AND SIMULATION TECHNIQUES II, BRADFORD, ENGLAND, pp.XIII-XVI, ISBN: 1-86058-258-3.

Rahnejat, H (1999) Multi-body Dynamics in UK: A perspective. In Swedish National Seminar in Multi-body Dynamics, Skane, Sweden, pp.1079-1094.

Kelly, P, Menday, MT, Rahnejat, H, Ebrahimi, M (1999) Powertrain refinement: A combined experimental and multi-body dynamics analysis approach. In Aachener Kolloquium, Ika, Aachen, Germany, pp.1079-1094.

Arrundale, P, Rahnejat, H, Menday, MT (1999) Multi-body dynamics of automobile drivelines: An investigation into the Interaction between Shuffle and Clonk. In 32nd ISATA, Vienna, Austria, pp.397-405.

Kelly, P, Rahnejat, H, Biermann, JW (1999) A parametric study of clutch pedal whoop: Numerical prediction and experimental Verification. In 32nd ISATA, Vienna, Austria, pp.387-396.

Kushwaha, M, Rahnejat, H, Jin, ZM, Johns, PM (1998) Tribo-multibody dynamic analysis of valve-train systems. In I.Mech.E. Trans. Conf. on Multi-body Dynamics, London, pp.83-101.

Arrundale, D, Hussain, K, Rahnejat, H, Menday, MT (1998) Acoustic response of driveline pieces under impacting loads (Clonk). In Proc. 31st ISATA, Dusseldorf, pp.319-331.

Naghieh, GR, Jin, ZM, Rahnejat, H (1998) Contact mechanics analysis for layered elasto-plastic and viscoelastic coatings. In Proc. 8th NordTrib, Ebeltoft, Denmark, pp.95-104.

Kelly, P, Rahnejat, H, Biermann, JW, Hagerodt, B (1998) Combining design of experiments and modelling techniques to resolve complex clutch pedal noise and vibration. In IMechE Conf. Trans. on European Conf. on Vehicle Noise and Vibration, London, pp.297-309.

Lynagh, N, Rahnejat, H, Ebrahimi, M (1998) Diagnostics for real-time vibration monitoring of precision spindles. In Proc. 6th Int. Sympos. AMST, Inst. Measurement & Control, Bradford, UK, pp.299-310.

Razmi, J, Rahnejat, H, Khan, MK (1998) The analytic hierarchy process and knowledge-based system in classification of push, pull and hybrid push-pull systems. In Proc. Pacific Conference on Manufacturing, Brisbane, Australia, pp.230-236.

Kelly, P, Rahnejat, H, Biermann, JW (1998) Multi-body dynamics investigation of clutch pedal in-cycle vibration (whoop). In International Conference on Multi-Body Dynamics - New Techniques and Applications, INTERNATIONAL CONFERENCE ON MULTI-BODY DYNAMICS, LONDON, ENGLAND, pp.167-178, ISBN: 1-86058-152-8.

Naghieh, GR, Rahnejat, H, Jin, ZM (1997) Contact mechanics of viscoelastic layered surface. In Contact Mechanics 97, Madrid, Spain, pp.59-68.

Rahnejat, H, Centea, D, Kelly, P (1997) Non-linear multi-body dynamic analysis for the study of in-cycle vibrations (whoop) of cable operated clutch systems. In Proc. 30th ISATA, Florence, Italy, pp.245-252.

Kushwaha, M, Rahnejat, H, Rahnejat, PM (1997) Tribo-dynamic multi-body analysis of vehicular valve-train systems. In Proc. ADAMS Int. Users' Conf.97 in Multi-body Dyn.,, Yipsilanti, USA, pp.1-26.

Jalali Vahid, D, Rahnejat, H, Jin, ZM (1997) Elastohydrodynamic lubrication of point contact under combined rolling and squeeze film motion. In Proc. Inst. Sympos. on Multi-body Dyn.: Monitoring & Simul. Techniques (Inst. MC), Bradford, UK, pp.179-188.

Rade, P, Kushwaha, M, Rahnejat, H (1997) Virtual prototype testing applied for non-linear dynamic analysis of a vehicle tailgate. In Proc. Int. Sympos. on Multi-body Dyn.: Monitoring & Simul. Techniques (Inst.MC), Bradford, UK, pp.315-325.

Kelly, P and Rahnejat, H (1997) Clutch pedal dynamic noise and vibration investigation. In Proc. Int. Sympos. on Multi-body Dyn.: Monitoring & Simul. Techniques (Inst. MC), Bradford, UK, pp.23-31.

Boysal, A and Rahnejat, H (1996) ADAMS Generic Engine: A tribo-dynamic Analysis Tool. In Proc. ADAMS Int. User's Conf. 96 in Multi-body Dyn, Yipsilanti, USA, pp.1-19.

Razmi, J, Rahnejat, H, Khan, MK (1996) A model to define hybrid systems at the interface between push and pull systems. In Khan, MK, Wright, CS, Whalley, R, Ma, X, Kochhar, AK, Burns, ND, Cooke, J, Cessford, S, Whitworth, J (ed) International Symposium on Advanced Manufacturing Processes, Systems and Technologies (AMPST 96), ADVANCED MANUFACTURING PROCESSES, SYSTEMS, AND TECHNOLOGIES (AMPST 96), UNIV BRADFORD, BRADFORD, ENGLAND, pp.653-663, ISBN: 0-85298-989-X.



Books

Gohar, R and Rahnejat, H (2012) Fundamentals of tribology: 2nd edition,ISBN: 9781848168602. DOI: 10.1142/P836.

Rahnejat, H (2010) Tribology and Dynamics of Engine and Powertrain, Woodhead Pub Ltd, ISBN: 9781845693619.

Gohar, R and Rahnejat, H (2008) Fundamentals Of Tribology, Imperial College Press, ISBN: 9781848161849.

Rahnejat, H and Rothberg, SJ (ed) (2004) Multi-body Dynamics: Monitoring and Simulation Techniques - III, Professional Engineering Publishing Ltd, ISBN: 1-86058-463-2.

Rahnejat, H, Ebrahimi, M, Whalley, R (ed) (2000) Multi-body Dynamics: Monitoring and Simulation Techniques II, Professional Engineering Publishing (IMechE).

Champoussin, JC, Kelly, P, Larson, R, Rahnejat, H (ed) (2000) ISATA 2000: Powertrain Technology - Developments in petrol/diesel engines and transmissions, Professional Engineering Publications (IMechE).

Rahnejat, H (1998) Multi-body Dynamics: Vehicles, Machines and Mechanisms, Professional Engineering Publications (IMechE).

Rahnejat, H, Brookes, P, Eickhoff, B, Kelly, P, Mostofi, A, Gupta, S (ed) (1998) IMechE Conf. Trans. on Multi-body Dynamics: New Techniques and Applications, Professional Engineering Publications (IMechE).

Rahnejat, H and Whalley, R (ed) (1997) Multi-body Dynamics: Monitoring and Simulation Techniques, Mechanical Engineering Publications (IMechE).

Prabhu, V, Bera, H, Rahnejat, H, Gill, R (ed) (1991) 6th Symposium on Computer Aided Design, Robotics and Factories of the Future, International Society for Productivity Enhancement (ISPE).



CD Objects

Karagiannis, I, Theodossiades, S, Rahnejat, H (2011) Tribodynamics of hypoid gear pairs,.

Perera, M, Theodossiades, S, Rahnejat, H, Kelly, P (2011) Drive rattle elastodynamic response of manual automotive transmissions,.

Theodossiades, S, Rahnejat, H, Hodson, D (2011) Tribological Studies in Pressurized Metered Dose Inhalers,.

De la Cruz, M, Theodossiades, S, Rahnejat, H (2010) Analysis of non-linear impact dynamics in automotive transmissions - gear rattle,.

Koronias, G, Theodossiades, S, Rahnejat, H, Saunders, T (2010) Vibrations of differential units in light trucks,.

Perera, MSM, De la Cruz, M, Theodossiades, S, Rahnejat, H, Kelly, P (2010) Elastodynamic response of automotive transmissions to impact induced vibrations,.

Theodossiades, S, Rahnejat, H, Kelly, P (2007) On the effect of cardboard liners on impact-induced high frequency vehicular driveline vibrations,.

Sharaf, AM, Mavros, G, Rahnejat, H, King, PD (2006) Multi-Physics Modelling Approach in All Terrain Vehicle Longitudinal Dynamics, Paper IMECE2006-13578,.

Theodossiades, S, Gnanakumarr, MM, Rahnejat, H, Menday, M (2003) Elasto-Multibody Dynamic Simulation of Impact Induced High Frequency Vehicular Driveline Vibrations,.

Al Samieh, MF, Rahnejat, H, Dowson, D (2002) Boundary Changes Between Rigid and Elastic Isco-Viscous Lubrication Due to Structural Forces in Ultra-Thin Conjunctions,.

Gupta, S, Rahnejat, H, Dowson, D (2002) Thin Shell Engine Bearings Under Transient Elastrohydrodynamic Regime of Lubrication,.

Balakrishnan, S and Rahnejat, H (2002) Transient Elastohydrodynamic Lubrication of Piston Skirt to Cylinder Liner Under Combined Reciprocating and Slapping Motions,.

Gupta, S, Kelly, P, Rahnejat, H (2001) Elasto-Multi-Body Dynamics of Multi-Cylinder Internal Combustion Engine,.



Chapters

Rahmani, R (2018) Surface texturing for enhanced tribological performance. In Fundamentals of Tribology, World Scientific Europe Ltd, pp.413-413, ISBN: 978-1786345172. DOI: 10.1142/9781786345189_0015.

Rahnejat, H, Rahmani, R, Mohammadpour, M, Johns-Rahnejat, PM (2017) Tribology of power train systems. In Unknown Parent Title, © ASM International, pp.916-916, ISBN: 9781627081412.

Mavros, G (2010) Contact mechanics of tyre-road interactions and its role in vehicle shuffle. In Rahnejat, (ed) Tribology and Dynamics of Engine and Powertrain Fundamentals, Applications and Future Trends, Elsevier, pp.703-734, ISBN: 9781845699932.

Theodossiades, S, Tangasawi, O, Rahnejat, H (2010) Multi-physics approach for analysis of transmission rattle. In ed, HR (ed) in Tribology and Dynamics of Engine and Powertrain: Fundamentals, Applications and Future Trends (Chapter 29), Woodhead Publishing Ltd, pp.878-913, ISBN: 978-1-84569-715-0.

Perera, MSM, Theodossiades, S, Rahnejat, H (2010) Tribo-elasto-multi-body Dynamics of a Single Cylinder Engine Under Fired Condition. In ed, HR (ed) in Tribology and Dynamics of Engine and Powertrain: Fundamentals, Applications and Future Trends (Chapter 31), Woodhead Publishing Ltd, pp.928-946, ISBN: 978-1-84569-715-0.

Teodorescu, M, Theodossiades, S, Rahnejat, H (2010) Micro-engines and micro-gears. In ed, HR (ed) in Tribology and Dynamics of Engine and Powertrain: Fundamentals, Applications and Future Trends (Chapter 32), Woodhead Publishing Ltd, pp.947-959, ISBN: 978-1-84569-715-0.

Mishra, PC, Rahnejat, H, King, PD (2010) Transient thermo-elastohydrodynamics of rough piston ring conjunction. In Rahnejat, HE (ed) Tribology and Dynamics of Engine and Powertrain; Fundamentals, applications and future trends, Woodhead Publishing, pp.518-541, ISBN: 978-1-84569-361-9.

Rahmani, R, Shirvani, A, Shirvani, H (2010) Optimised textured surfaces with application in piston-ring/cylinder liner contact. In Rahnejat, H (ed) Tribology and dynamics of engine and powertrain: Fundamentals, applications and future trends, Woodhead Publishing Limited, pp.470-517, ISBN: 978-1-84569-361-9.

Mishra, PC and Rahnejat, H (2010) Tribology of Big-End-Bearings. In Rahnejat, H (ed) Tribology and dynamics of engine and power train, pp.635-659, ISBN: 978-1-84569-361-9.

Menday, M and Rahnejat, H (2010) Friction Lining characteristics and the clutch take up judder phenomenon with manual transmission. In Rahnejat, H (ed) Tribology and dynamics of engine and power train, pp.680-702, ISBN: 978-1-84569-361-9.

Prokopovich, P, Teodorescu, M, Rahnejat, H (2010) Surface phenomena in tribology. In Rahnejat, H (ed) Tribology and dynamics of engine and power train, pp.73-104, ISBN: 978-1-84569-361-9.

Rahnejat, H (2010) An introduction to multi-physics multi-scale approach. In Rahnejat, H (ed) Tribology and dynamics of engine and power train, pp.3-38, ISBN: 978-1-84569-361-9.

Teodorescu, M, Theodossiades, S, Rahnejat, H (2004) Multi-body Dynamics: An evolution from constrained inertial dynamics to a multi-physics interactive framework. In Talaba, D and Rochy, TE (ed) in PRODUCT ENGINEERING: Eco-design, Technologies and Green Energy, Springer, pp.273-298, ISBN: 1-4020-2932-2.



Posters

Humphrey, E, Morris, N, Rahmani, R, Rahnejat, H (2018) Lubricant-surface system characterisation for high performance transmissions, TriboUK2018.

Humphrey, E, Morris, N, Rahmani, R, Rahnejat, H, Rapson, G (2017) A test procedure to investigate lubricant-surface combinations for high-performance racing transmissions [abstract], TriboUK 2017.



Other

Rahnejat, H (2015) Obituary: Doru Talaba (1959–2014). DOI: 10.1177/1464419315590291.

Rahmani, R and Rahnejat, H (2015) Guest editorial [Special Issue: Textured Surfaces], Guest editorial [Special Issue: Textured Surfaces]. DOI: 10.1177/1350650115572210.



Getting in touch

Research Office
Loughborough University
Loughborough
Leicestershire
LE11 3TU
researchpolicy@lboro.ac.uk
+44 (0)1509 222453

Research Repository
University Library
Loughborough University
Loughborough
LE11 3TU
repository@lboro.ac.uk
+44 (0)1509 222338 / 222414