Journal Articles
Xiang, Y, Yan, J, Bao, X,
Gleadall, A, Sun, T (2024)
Investigation of cell infiltration and colonization in 3D porous scaffolds via integrated experimental and computational strategies,
Journal of Biotechnology, 382, pp.78-87, ISSN: 0168-1656. DOI:
10.1016/j.jbiotec.2024.01.015.
Biasetto, L,
Gleadall, A, Gastaldi, V (2023)
Ink Tuning for Direct Ink Writing of Planar Metallic Lattices,
Advanced Engineering Materials, 25(20), ISSN: 1438-1656. DOI:
10.1002/adem.202201858.
Kayali, Y,
Gleadall, A, Silberschmidt, V, Demirci, E (2023)
Advance algorithm for two-dimensional fibrous-network generation,
Journal of Computational Design and Engineering, 10(4), pp.1790-1803, DOI:
10.1093/jcde/qwad074.
Yan, J, Demirci, E,
Gleadall, A (2023)
Single-filament-wide tensile-testing specimens reveal material-independent fibre-induced anisotropy for fibre-reinforced material extrusion additive manufacturing,
Rapid Prototyping Journal, 29(7), pp.1453-1470, ISSN: 1355-2546. DOI:
10.1108/RPJ-09-2022-0301.
Yan, J, Demirci, E,
Gleadall, A (2023)
3D short fibre orientation for universal structures and geometries in material extrusion additive manufacturing,
Additive Manufacturing, 69, 103535, ISSN: 2214-8604. DOI:
10.1016/j.addma.2023.103535.
Xiang, Y, Yan, J, Bao, X,
Gleadall, A, Roach, P, Sun, T (2023)
Evaluation of polymeric particles for modular tissue cultures in developmental engineering,
International Journal of Molecular Sciences, 24(6), 5234, ISSN: 1661-6596. DOI:
10.3390/ijms24065234.
Hewavidana, Y, Balci, MN,
Gleadall, A, Pourdeyhimi, B, Silberschmidt, V, Demirci, E (2023)
Assessing crimp of fibres in random networks with 3D imaging,
Polymers, 15(4), 1050, DOI:
10.3390/polym15041050.
Soyarslan, C,
Gleadall, A, Yan, J, Argeso, H, Sozumert, E (2023)
Elastostatics of star-polygon tile-based architectured planar lattices,
Materials and Design, 226(2023), 111580, ISSN: 0261-3069. DOI:
10.1016/j.matdes.2022.111580.
Yan, J, Demirci, E,
Gleadall, A (2022)
Are classical fibre composite models appropriate for material extrusion additive manufacturing? A thorough evaluation of analytical models,
Additive Manufacturing, 62(2023), 103371, ISSN: 2214-7810. DOI:
10.1016/j.addma.2022.103371.
Allum, J, Moetazedian, A,
Gleadall, A, Mitchell, N, Marinopoulos, T, McAdam, I, Li, S, Silberschmidt, V (2022)
Extra-wide deposition in extrusion additive manufacturing: A new convention for improved interlayer mechanical performance,
Additive Manufacturing, 61(2023), 103334, ISSN: 2214-7810. DOI:
10.1016/j.addma.2022.103334.
Lu, Y, Han, X,
Gleadall, A, Chen, F, Zhu, W, Zhao, L (2022)
Continuous fibre reinforced Vat photopolymerisation (CONFIB-VAT),
Additive Manufacturing, 60(Part A), 103233, ISSN: 2214-8604. DOI:
10.1016/j.addma.2022.103233.
Kayali, Y, Ding, M, Hamdallah, S, Qi, S, Bibb, R,
Gleadall, A (2022)
Effect of printing parameters on microscale geometry for 3D printed lattice structures,
Materials Today: Proceedings, 70, pp.31-37, DOI:
10.1016/j.matpr.2022.08.487.
Zhang, B, Teoh, XY, Yan, J,
Gleadall, A, Belton, P, Bibb, R, Qi, S (2022)
Development of combi-pills using the coupling of semi-solid syringe extrusion 3D printing with fused deposition modelling,
International Journal of Pharmaceutics, 625(2022), 122140, ISSN: 0378-5173. DOI:
10.1016/j.ijpharm.2022.122140.
Kayali, Y, Balci, MN,
Gleadall, A, Silberschmidt, V, Demirci, E (2022)
Numerical characterisation of uniformity of fibrous networks,
Powder Technology, 408(2022), 117783, ISSN: 0032-5910. DOI:
10.1016/j.powtec.2022.117783.
Hewavidana, Y, Balci, M,
Gleadall, A, Pourdeyhimi, B, Silberschmidt, V, Demirci, E (2022)
Algorithm to determine orientation distribution function from microscopic images of fibrous networks: Validation with X-ray microtomography,
Micron, 160(2022), 103321, ISSN: 0968-4328. DOI:
10.1016/j.micron.2022.103321.
Moetazedian, A,
Gleadall, A, Silberschmidt, V (2022)
Fracture mechanisms of additively manufactured polylactide: Effect of in vitro hydrolytic degradation,
Engineering Fracture Mechanics, 269, 108572, ISSN: 0013-7944. DOI:
10.1016/j.engfracmech.2022.108572.
Thomas, D and
Gleadall, A (2022)
Advanced metal transfer additive manufacturing of high temperature turbine blades,
The International Journal of Advanced Manufacturing Technology, 120(9-10), pp.6325-6335, ISSN: 0268-3768. DOI:
10.1007/s00170-022-09176-2.
Ekinci, A, Johnson, A,
Gleadall, A, Han, X (2021)
The effect of geometry on tensile strength of biodegradable polylactic-acid tensile-test specimens by material extrusion,
International Journal of Rapid Manufacturing, 10(1), pp.23-35, ISSN: 1757-8817. DOI:
10.1504/IJRAPIDM.2021.11993.
Moetazedian, A, Allum, J,
Gleadall, A, Silberschmidt, V (2021)
Bulk-material bond strength exists in extrusion additive manufacturing for a wide range of temperatures, speeds, and layer times,
3D Printing and Additive Manufacturing, 10(3), pp.514-523, ISSN: 2329-7662. DOI:
10.1089/3dp.2021.0112.
Yan, J, Demirci, E, Ganesan, A,
Gleadall, A (2021)
Extrusion width critically affects fibre orientation in short fibre reinforced material extrusion additive manufacturing,
Additive Manufacturing, 49, 102496, ISSN: 2214-8604. DOI:
10.1016/j.addma.2021.102496.
Allum, J, Moetazedian, A,
Gleadall, A, Silberschmidt, V (2021)
Discussion on the microscale geometry as the dominant factor for strength anisotropy in material extrusion additive manufacturing,
Additive Manufacturing, 48(Part A), 102390, ISSN: 2214-8604. DOI:
10.1016/j.addma.2021.102390.
Vega, G, Paz, R,
Gleadall, A, Monzón, M, Alemán-Domínguez, ME (2021)
Comparison of CAD and voxel-based modelling methodologies for the mechanical simulation of extrusion-based 3D printed scaffolds,
Materials, 14(19), 5670, DOI:
10.3390/ma14195670.
Chen, F, Ekinci, A, Li, L, Cheng, M, Johnson, A,
Gleadall, A, Han, X (2021)
How do the printing parameters of fused filament fabrication and structural voids influence the degradation of biodegradable devices?,
Acta Biomaterialia, 136, pp.254-265, ISSN: 1742-7061. DOI:
10.1016/j.actbio.2021.09.020.
Moetazedian, A, Allum, J,
Gleadall, A, Mele, E, Silberschmidt, V (2021)
MaTrEx AM: A new hybrid additive manufacturing process to selectively control mechanical properties,
Additive Manufacturing, 47, 102337, ISSN: 2214-7810. DOI:
10.1016/j.addma.2021.102337.
Daniel, F,
Gleadall, A, Radadia, AD (2021)
Influence of interface in electrical properties of 3D printed structures,
Additive Manufacturing, 46, 102206, ISSN: 2214-8604. DOI:
10.1016/j.addma.2021.102206.
Zhang, B,
Gleadall, A, Belton, P, Mcdonagh, T, Bibb, R, Qi, S (2021)
New insights into the effects of porosity, pore length, pore shape and pore alignment on drug release from extrusion-based additive manufactured pharmaceuticals,
Additive Manufacturing, 46, 102196, ISSN: 2214-7810. DOI:
10.1016/j.addma.2021.102196.
Gleadall, A (2021)
FullControl GCode Designer: Open-source software for unconstrained design in additive manufacturing,
Additive Manufacturing, 46, 102109, ISSN: 2214-7810. DOI:
10.1016/j.addma.2021.102109.
Ekinci, A, Han, X,
Gleadall, A, Johnson, A (2021)
Improving the shape stability and enhancing the properties of layer dependent material extruded biodegradable polylactic acid for thin implants,
Rapid Prototyping Journal, 27(6), pp.1101-1107, ISSN: 1355-2546. DOI:
10.1108/RPJ-05-2020-0108.
Lu, Y, Han, XX,
Gleadall, A, Zhao, L (2021)
Fracture toughness of three-dimensional stereolithography printed polymer reinforced with continuous carbon fibres,
3D Printing and Additive Manufacturing, 9(4), pp.278-287, ISSN: 2329-7662. DOI:
10.1089/3dp.2020.0310.
Zhang, B, Nasereddin, J, McDonagh, T, von Zeppelin, D,
Gleadall, A, Alqahtani, F, Bibb, R, Belton, P, Qi, S (2021)
Effects of porosity on drug release kinetics of swellable and erodible porous pharmaceutical solid dosage forms fabricated by hot melt droplet deposition 3D printing,
International Journal of Pharmaceutics, 604, 120626, ISSN: 0378-5173. DOI:
10.1016/j.ijpharm.2021.120626.
Moetazedian, A,
Gleadall, A, Mele, E, Silberschmidt, V (2021)
Damage in extrusion additive manufactured biomedical polymer: effects of testing direction and environment during cyclic loading,
Journal of the Mechanical Behavior of Biomedical Materials, 118, 104397, ISSN: 1751-6161. DOI:
10.1016/j.jmbbm.2021.104397.
de Macedo, RQ, Ferreira, RTL,
Gleadall, A, Ashcroft, I (2021)
VOLCO-X: Numerical simulation of material distribution and voids in extrusion additive manufacturing,
Additive Manufacturing, 40, 101900, ISSN: 2214-7810. DOI:
10.1016/j.addma.2021.101900.
Moetazedian, A,
Gleadall, A, Han, X, Ekinci, A, Mele, E, Silberschmidt, V (2020)
Mechanical performance of 3D printed polylactide during degradation,
Additive Manufacturing, 38, 101764, ISSN: 2214-8604. DOI:
10.1016/j.addma.2020.101764.
Allum, J, Kitzinger, J, Li, Y, Silberschmidt, V,
Gleadall, A (2020)
ZigZagZ: Improving mechanical performance in extrusion additive manufacturing by nonplanar toolpaths,
Additive Manufacturing, 38, 101715, ISSN: 2214-8604. DOI:
10.1016/j.addma.2020.101715.
Allum, J,
Gleadall, A, Silberschmidt, V (2020)
Fracture of 3D-printed micro-tensile specimens: filament-scale geometry-induced anisotropy,
Procedia Structural Integrity, 28, pp.591-601, ISSN: 2452-3216. DOI:
10.1016/j.prostr.2020.10.069.
Moetazedian, A,
Gleadall, A, Mele, E, Silberschmidt, V (2020)
Damage in extrusion additive manufactured parts: effect of environment and cyclic loading,
Procedia Structural Integrity, 28, pp.452-457, ISSN: 2452-3216. DOI:
10.1016/j.prostr.2020.10.053.
Ekinci, A,
Gleadall, A, Johnson, A, Li, L, Han, X (2020)
Mechanical and hydrolytic properties of thin polylactic acid films by fused filament fabrication,
Journal of the Mechanical Behavior of Biomedical Materials, 114, 104217, ISSN: 1751-6161. DOI:
10.1016/j.jmbbm.2020.104217.
Moetazedian, A, Budisuharto, AS, Silberschmidt, V,
Gleadall, A (2020)
CONVEX (CONtinuously Varied EXtrusion): a new scale of design for additive manufacturing,
Additive Manufacturing, 37, 101576, ISSN: 2214-8604. DOI:
10.1016/j.addma.2020.101576.
Allum, J, Moetazedian, A,
Gleadall, A, Silberschmidt, V (2020)
Interlayer bonding has bulk-material strength in extrusion additive manufacturing: New understanding of anisotropy,
Additive Manufacturing, 34, 101297, ISSN: 2214-8604. DOI:
10.1016/j.addma.2020.101297.
Ekinci, A, Johnson, A,
Gleadall, A, Engstrom, D, Han, X (2020)
Layer-dependent properties of material extruded biodegradable polylactic acid,
Journal of the Mechanical Behavior of Biomedical Materials, 104, 103654, ISSN: 1751-6161. DOI:
10.1016/j.jmbbm.2020.103654.
Allum, J,
Gleadall, A, Silberschmidt, V (2020)
Fracture of 3D-printed polymers: Crucial role of filament-scale geometric features,
Engineering Fracture Mechanics, 224, 106818, ISSN: 0013-7944. DOI:
10.1016/j.engfracmech.2019.106818.
Ruiz-Cantu, L,
Gleadall, A, Faris, C, Segal, J, Shakesheff, K, yang, J (2019)
Multi-material 3D bioprinting of porous constructs for cartilage regeneration,
Materials Science and Engineering C, 109, 110578, ISSN: 0928-4931. DOI:
10.1016/j.msec.2019.110578.
Moetazedian, A,
Gleadall, A, Han, X, Silberschmidt, V (2019)
Effect of environment on mechanical properties of 3D printed polylactide for biomedical applications,
Journal of the Mechanical Behavior of Biomedical Materials, 102, 103510, ISSN: 1751-6161. DOI:
10.1016/j.jmbbm.2019.103510.
Abdo, D,
Gleadall, A, Silberschmidt, V (2019)
Damage and damping of short-glass-fibre-reinforced PBT composites under dynamic conditions: Effect of matrix behaviour,
Composite Structures, 226, 111286, ISSN: 0263-8223. DOI:
10.1016/j.compstruct.2019.111286.
Abdo, D,
Gleadall, A, Silberschmidt, V (2019)
Failure behaviour of short-fibre-reinforced PBT composites: Effect of strain rate,
Engineering Failure Analysis, 105, pp.466-476, ISSN: 1350-6307. DOI:
10.1016/j.engfailanal.2019.07.028.
Abdo, D,
Gleadall, A, Sprengel, D, Silberschmidt, V (2018)
Experimental and morphological investigations of fracture behavior of PBT/TPEE,
Procedia Structural Integrity, 13, pp.511-516, ISSN: 2452-3216. DOI:
10.1016/j.prostr.2018.12.084.
Gleadall, A, Ashcroft, IA, Segal, J (2018)
VOLCO: A predictive model for 3D printed microarchitecture,
Additive Manufacturing, 21, pp.605-618, ISSN: 2214-8604. DOI:
10.1016/j.addma.2018.04.004.
Gleadall, A, Visscher, DO, Yang, J, Thomas, D, Segal, J (2018)
Review of additive manufactured tissue engineering scaffolds: relationship between geometry and performance,
Burns Trauma, 6, pp.19-19, ISSN: 2321-3876. DOI:
10.1186/s41038-018-0121-4.
Gretzinger, S, Beckert, N,
Gleadall, A, Lee-Thedieck, C, Hubbuch, J (2018)
3D bioprinting – Flow cytometry as analytical strategy for 3D cell structures,
Bioprinting, 11, ISSN: 2405-8866. DOI:
10.1016/j.bprint.2018.e00023.
Visscher, DO,
Gleadall, A, Buskermolen, JK, Burla, F, Segal, J, Koenderink, GH, Helder, MN, van Zuijlen, PPM (2018)
Design and fabrication of a hybrid alginate hydrogel/poly(ε-caprolactone) mold for auricular cartilage reconstruction,
Journal of Biomedical Materials Research Part B: Applied Biomaterials, ISSN: 1552-4973. DOI:
10.1002/jbm.b.34264.
Gleadall, A, Vladov, N, Segal, J, Ratchev, S, Plasch, M, Kimmig, D, Dickerhof, M (2016)
A decision support methodology for embodiment design and process chain selection for hybrid manufacturing platforms,
International Journal of Advanced Manufacturing Technology, pp.1-17, ISSN: 0268-3768. DOI:
10.1007/s00170-016-8514-7.
Ruiz-Cantu, L,
Gleadall, A, Faris, C, Segal, J, Shakesheff, K, Yang, J (2016)
Characterisation of the surface structure of 3D printed scaffolds for cell infiltration and surgical suturing,
Biofabrication, 8(1), ISSN: 1758-5082. DOI:
10.1088/1758-5090/8/1/015016.
Gleadall, A, Pan, J, Kruft, M-A (2015)
An atomic finite element model for biodegradable polymers. Part 2. A model for change in Young’s modulus due to polymer chain scission,
Journal of the Mechanical Behavior of Biomedical Materials, 51, pp.237-247, ISSN: 1751-6161. DOI:
10.1016/j.jmbbm.2015.07.010.
Gleadall, A, Pan, J, Ding, L, Kruft, M-A, Curco, D (2015)
An atomic finite element model for biodegradable polymers. Part 1, Formulation of the finite elements,
Journal of the Mechanical Behavior of Biomedical Materials, 51, pp.409-420, ISSN: 1751-6161. DOI:
10.1016/j.jmbbm.2015.07.008.
Gleadall, A, Pan, J, Kruft, M-A, Kellomaki, M (2014)
Degradation mechanisms of bioresorbable polyesters. Part 2, Effects of initial molecular weight and residual monomer,
Acta Biomaterialia, 10(5), pp.2233-2240, ISSN: 1742-7061. DOI:
10.1016/j.actbio.2014.01.017.
Gleadall, A, Pan, J, Kruft, M-A, Kellomaki, M (2014)
Degradation mechanisms of bioresorbable polyesters. Part 1, Effects of random scission, end scission and autocatalysis,
Acta Biomaterialia, 10(5), pp.2223-2232, ISSN: 1742-7061. DOI:
10.1016/j.actbio.2013.12.039.
Gleadall, A and Pan, J (2013)
Computer Simulation of Polymer Chain Scission in Biodegradable Polymers,
Journal of Biotechnology & Biomaterials, 03(01).
Gleadall, A, Pan, J, Atkinson, H (2012)
A simplified theory of crystallisation induced by polymer chain scissions for biodegradable polyesters,
Polymer Degradation and Stability, 97(9), pp.1616-1620, ISSN: 0141-3910. DOI:
10.1016/j.polymdegradstab.2012.06.023.
