Journal Articles
Chen, D, Cheng, ZQ,
Cunningham, P, Xiong, JJ (2021)
Fatigue life prediction of 2524‐T3 and 7075‐T62 thin‐sheet aluminium alloy with an initial impact dent under block spectrum loading,
Fatigue & Fracture of Engineering Materials & Structures, ffe.13416, ISSN: 8756-758X. DOI:
10.1111/ffe.13416.
Pouchias, A,
Cunningham, P, Stein, J, Kazilas, M (2019)
Development of a flexible dielectric sensor for flow monitoring of the liquid resin infusion process,
Sensors, 19(23), pp.5292-5292, DOI:
10.3390/s19235292.
Dai, S and
Cunningham, PR (2016)
Multi-scale damage modelling of 3D woven composites under uni-axial tension,
COMPOSITE STRUCTURES, 142, pp.298-312, ISSN: 0263-8223. DOI:
10.1016/j.compstruct.2016.01.103.
Dai, S,
Cunningham, P, Marshall, S, Silva, C (2015)
Open hole quasi-static and fatigue characterisation of 3D woven composites,
Composite Structures, 131, pp.765-774, ISSN: 1879-1085. DOI:
10.1016/j.compstruct.2015.06.032.
Dai, S,
Cunningham, P, Marshall, S, Silva, C (2015)
Influence of fibre architecture on the tensile, compressive, and flexural behaviour of 3D woven composites,
Composites: Part A applied science and manufacturing, ? DOI:
10.1016/j.compositesa.2014.11.012.
James, C, Watson, A,
Cunningham, P (2015)
Experimental and numerical investigation of the effect of asymmetry on the residual strength of a composite sandwich panel,
Journal of Sandwich Structures and Materials, ISSN: 1530-7972. DOI:
10.1177/1099636215577348.
James, C, Watson, A,
Cunningham, P (2015)
Numerical modelling of the compression-after-impact performance of a composite sandwich panel,
Journal of Sandwich Structures and Materials, ISSN: 1530-7972. DOI:
10.1177/1099636215576475.
Harvey, CM,
Cunningham, P, Wang, SS (2013) Fracture mode partitions in layered isotropic and laminated composite straight beam structures,
International Journal of Solids and Structures, 0, pp.0-0.
Römelt, P and
Cunningham, PR (2012)
A multi-scale finite element approach for modelling damage progression in woven composite structures,
Composite Structures, 94(3), pp.977-986, ISSN: 0263-8223. DOI:
10.1016/j.compstruct.2011.10.024.
Loughlan, J, Yidris, N,
Cunningham, PR (2011) The effects of local buckling and materials yielding on the axiel stiffness and failure of uniformly compressed I-section and box-section struts,
Journal of Thin-Walled Structures, 49(2), pp.264-279.
Loughlan, J, Yidris, N,
Cunningham, PR (2011) The effects of local buckling and materials yielding on the axial stiffness and failure of uniformly compressed l-section and box-section struts,
Journal of Thin-Walled Structures, 49(2), pp.264-279.
Loughlan, J, Yidris, N,
Cunningham, PR (2009)
The influence of post-local buckling mechanics on the stress variations, axial stiffness and ultimate failure strength of uniformly compressed thin-walled I-Section struts,
Journal of Physics: Conference Series, 181(1), ISSN: 1742-6588. DOI:
10.1088/1742-6596/181/1/012031.
Walker, SJI, Aglietti, GS,
Cunningham, PR (2008) A Study of the Damping Linearity of Jointed Metal Plates,
AIAA Journal, 46(7), pp.1738-1746, ISSN: 0001-1452.
Walker, SJI, Aglietti, GS,
Cunningham, P (2008)
Study of damping linearity of jointed metal plates,
AIAA Journal, 46(7), pp.1738-1746, ISSN: 0001-1452. DOI:
10.2514/1.34323.
Emery, TR, Dulieu Barton, JM, Earl, JS,
Cunningham, PR (2008)
A generalised approach to the calibration of orthotropic materials for thermoelastic stress analysis,
Composites Science and Technology, 68(3-4), pp.743-752, DOI:
10.1016/j.compscitech.2007.09.002.
Walker, SJI, Aglietti, GS,
Cunningham, PR (2008)
Low Frequency Damping of Metal Plates in Ambient Air,
Proceedings of the Institution of Mechanical Engineerings, Part C: Journal of Mechanical Engineering, 222(8), pp.1413-1420.
Schwingshackl, CW, Aglietti, GS,
Cunningham, P (2007) Experimental Determination of the Dynamic Behavour of a Multifunctional Power Structure,
AIAA Journal, 45(2), pp.491-496.
Schwingshackl, CW, Aglietti, GS,
Cunningham, P (2006)
Parameter Optimisation of the Dynamic Behaviour of Inhomogeneous Multifunctional Power Structures,
AIAA Journal, 44(10), pp.2286-2294, ISSN: 0001-1452. DOI:
10.2514/1.18599.
Schwingshackl, CW, Aglietti, GS,
Cunningham, P (2006) Determination of Honeycomb Material Properties: Existing Theories and an Alternative Dynamic Approach,
Journal of Aerospace Engineering, 19(3), pp.177-183.
Dulieu Barton, JM, Emery, TR, Quinn, S,
Cunningham, P (2006)
A Temperature Correction Methodology for Quantitative Thermoelastic Stress Analysis and Damage Assessment,
Measurement Science and Technology, 17(6), pp.1627-1637, ISSN: 0957-0233. DOI:
10.1088/0957-0233/17/6/047.
Walker, SJI, Aglietti, GS,
Cunningham, P (2006) Experimental Analysis of Damping Across Joints in Metal Plates,
Applied Mechanics and Materials, 5-6(5-6), pp.391-398.
Walker, SJI, Aglietti, GS,
Cunningham, P (2006)
A study of joint damping in metal plates,
AIAA 57th International Astronautical Congress, IAC 2006, 8, pp.5181-5189, DOI:
10.2514/6.iac-06-c2.3.10.
Emery, T, Dulieu Barton, JM,
Cunningham, P (2005) Identification of Damage in Composite Structures using Thermoelastic Stress Analysis,
Key Engineering Materials, 293-294, pp.583-590.
Cunningham, P and White, RG (2004)
A Review of Analytical Methods for Aircraft Structures Subjected to High-Intensity Random Acoustic Loads,
Proceedings of the Institution of Mechanical Engineers Part G: Journal of Aerospace Engineering, 218(3), pp.231-242, ISSN: 0954-4100. DOI:
10.1243/0954410041872898.
Dulieu Barton, JM, Quinn, S, Eyre, C,
Cunningham, P (2004) Development of a Temperature Calibration Device for Thermoelastic Stress Analysis,
Applied Mechanics and Materials, 1-2, pp.197-204.
Cunningham, P and White, RG (2003)
Dynamic Response Prediction of Doubly Curved Honeycomb Sandwich Panels to Random Acoustic Excitation. Part 1: Experimental Study,
Journal of Sound and Vibration, 264(2), pp.579-603, DOI:
10.1016/S0022-460X(02)01210-5.
Cunningham, P, Langley, RS, White, RG (2003)
Dynamic Response Prediction of Doubly Curved Honeycomb Sandwich Panels to Random Acoustic Excitation Part 1: Theoretical Study,
Journal of Sound and Vibration, 264(2), pp.605-637, DOI:
10.1016/S0022-460X(02)01211-7.
Aglietti, GS and
Cunningham, PR (2002)
Is a simple support really that simple?,
JOURNAL OF SOUND AND VIBRATION, 257(2), pp.321-335, ISSN: 0022-460X. DOI:
10.1006/jsvi.2002.5061.
Aglietti, GS and
Cunningham, P (2002)
Is a Simple Support Really that Simple,
Journal of Sound and Vibration, 257(2), pp.321-335, DOI:
10.1006/jsvi.2002.5061.
Aglietti, GS,
Cunningham, P, Langley, RS (2002)
Verification of Various Modelling Techniques for Simply-Supported Piezoelectric Actuated Thin Panels,
Proceedings of the Institution of Mechanical Engineers Part G: Journal of Aerospace Engineering, 216(3), pp.155-164, ISSN: 0954-4100. DOI:
10.1243/095441002760553694.
Cunningham, PR, Dulieu-Barton, JM, Dutton, AG, Shenoi, RA (2002) The effect of ply lay-up upon the thermoelastic response of laminated composites,
Key Engineering Materials, 221-222, pp.325-336, ISSN: 1013-9826.
Cunningham, P and White, RG (2001)
A New Measurement Technique for the Estimation of Core Shear in Closed Sandwich Structures,
Journal of Composite Structures, 51(3), pp.319-334, DOI:
10.1016/S0263-8223(00)00148-3.
Cunningham, P, Dulieu Barton, JM, Dutton, AG, Shenoi, RA (2001) Thermoelastic Characterisation of Damage Around a Circular Hole in a GRP Component,
Key Engineering Materials, 204-205, pp.453-463.
Cunningham, P, White, RG, Aglietti, GS (2000)
The Effects of Various Design Parameters on the Free Vibration of Doubly Curved Composite Sandwich Structures,
Journal of Sound and Vibration, 230(3), pp.617-648, DOI:
10.1006/jsvi.1999.2632.
Cunningham, P, Xiao, Y, White, RG (1998) The Design of Advanced Aircraft Structures to Resist Acoustic Fatigue: Work in Progress,
Strain, 32(2), pp.43-49.
Cunningham, PR, Xiao, Y, White, RG (1998)
The design of advanced aircraft structures to resist acoustic fatigue; work in progress,
STRAIN, 34(2), pp.43-49, ISSN: 0039-2103. DOI:
10.1111/j.1475-1305.1998.tb01079.x.
Conferences
Sanjeev, S, O'Boy, D,
Cunningham, P, Fisher, S (2021)
Impact of mode shapes on experimental loss factor estimation in automotive joints. In
Noise and Vibration Conference and Exhibition, SAE International, 2021; SAE Technical Papers, Grand Rapids, Michigan, USA. DOI:
10.4271/2021-01-1110.
Sanjeev, S, O'Boy, DJ,
Cunningham, PR, Fisher, S (2021)
Influence of the bolt size on the source of damping in automotive joints. In
, Proceedings of INTER-NOISE 2021 - 2021 International Congress and Exposition of Noise Control Engineering,ISBN: 9781732598652. DOI:
10.3397/IN2021-2403.
Sanjeev, S, O'Boy, DJ,
Cunningham, PR, Fisher, S (2021) Effect of the increase in bolted contact area on experimental loss factor estimation in automotive joints. In
, "Advances in Acoustics, Noise and Vibration - 2021" Proceedings of the 27th International Congress on Sound and Vibration, ICSV 2021,ISBN: 9788378807995.
Sanjeev, S, Heaton, N, O'Boy, D,
Cunningham, P, Fisher, S (2020)
Modal analysis of a single-lap joint under dynamic loading. In
Internoise 2020 (49th International Congress and Exposition on Noise Control Engineering); Proceedings of Inter-Noise2020, Seoul (online only).
Pouchias, A,
Cunningham, PR, Stein, J, Kazilas, M (2019) Online flow monitoring system development for the resin transfer moulding process. In
ECCM18, ECCM 2018 - 18th European Conference on Composite Materials, Athens, Greece,ISBN: 9781510896932.
Pouchias, A,
Cunningham, PR, Stein, J, Kazilas, M (2019) Online flow monitoring system development for the resin transfer moulding process. In
, ECCM 2018 - 18th European Conference on Composite Materials,ISBN: 9781510896932.
Cunningham, P and Dai, S (2015)
The characterisation of notched 3D woven composites using Thermo-elastic Stress Analysis and Digital Image Correlation. In
20th International Conference on Composite Materials, Copenhagen, Denmark.
Bhatti, WA, Thring, RH,
Cunningham, PR (2014) Preliminary work associated with the structural integration of a PEM fuel cell into an unmanned aerial vehicle (UAV). In
, 20th World Hydrogen Energy Conference, WHEC 2014, pp.1908-1915, ISBN: 9780000000002.
Cunningham, PR, Dai, S, Marshall, S, Silva, C (2013) MECHANICAL BEHAVIOUR OF 3D WOVEN COMPOSITES
UNDER TENSION, COMPRESSION AND BENDING. In
19th International Conference on Composite Materials, Montreal, Canada, pp.2812-2821.
Cunningham, PR and Romelt, P, (2012) THE NUMERICAL ANALYSIS OF DAMAGE IN TEXTILE
COMPOSITES USING A MULTI-SCALE APPROACH. In
- 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Venice, Italy.
Loughlan, J, Yidris, N,
Cunningham, PR (2009) The Influence of Post-Local Buckling Mechanics on the Stress Variations, Axial Stiffness and Ultimate Strength of Uniformly Compressed Thin-Walled Struts. In
Proceedings of the 7th International Conference on Modern Practice in Stress and Vibration Analysis, Cambridge, UK, pp.1413-1420.
Emery, TR, Dulieu Barton, JM,
Cunningham, PR (2009) Sub-Surface Damage Location and Identification using Infra-red Techniques. In
Proceedings of the 17th International Conference on Composite Materials, Edinburgh, UK, pp.1413-1420.
Loughlan, J, Yidris, N,
Cunningham, PR (2009)
The Influence of Post-Local Buckling Mechanics on the Stress Variations, Axial Stiffness and Ultimate Failure Strength of Uniformly Compressed Thin-Walled I-Section Struts. In DulieuBarton, JM (ed)
7th International Conference on Modern Practice in Stress and Vibration Analysis, 7TH INTERNATIONAL CONFERENCE ON MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS, Murray Edwards Coll, Cambridge, ENGLAND. DOI:
10.1088/1742-6596/181/1/012031.
Emery, TR, Dulieu-Barton, JM,
Cunningham, PR (2009) Sub-surface damage location and identification using infra-red techniques. In
, ICCM International Conferences on Composite Materials.
Walker, SJI, Aglietti, GS,
Cunningham, P (2006) A Study of Joint Damping in Metal Plates. In
Proceedings of the 57th International Astronautical Congress, Velencia, Spain, pp.1353-1363.
Schwingshackl, CW, Aglietti, GS,
Cunningham, P (2006) The Dynamic Behaviour of Multifunctional Power Structures. In
Proceedings of the 57th International Astronautical Congress, Velencia, Spain, pp.1353-1363.
Walker, SJI, Aglietti, GS,
Cunningham, P (2006) Determining the Damping Factors for Jointed Metal Plates. In
Proceedings of the 9th International Conference on Recent Advances in Structural Dynamics, Southampton, UK, pp.1353-1363.
Schwingshackl, CW,
Cunningham, P, Aglietti, GS (2004) Honeycomb Elastic Material Properties: A Review of Some Existing Theories and a New Dynamic Approach. In
International Conference of Noise and Vibration Engineering, Proceedings of ISMA2004, Katholieke Universiteit, Leuven, Belgium, pp.1353-1363.
Cunningham, P, Langley, RS, White, RG (2002) On Predicting the Response of Acoustically-excited Doubly Curved Sandwich Panels. In
International Conference on Noise and Vibration Engineering, Proceedings of ISMA2002, Katholieke Universiteit, Leuven, Belgium, pp.2113-2122.
Thornton, B,
Cunningham, P, Dulieu Barton, JM (2002) Analysis of Transient Loads Using Thermoelastic Stress Analysis. In
International Conference on Advances in Experimental Mechanics, Proceedings of the BSSM International Conference on Advances in Experimental Mechanics, Stratford-upon-Avon, UK, pp.61-64.
Aglietti, GS,
Cunningham, P, Langley, RS (2002) Development and Verification of Modelling Techniques for Piezoelectric Actuated Panels. In
Structures, Structural Dyamics and Materials Conference, 43rd AIAA/ASME/ASCH/AHS, Denver, Colorado, USA, pp.1238-1246.
Cunningham, P, Dulieu Barton, JM, Shenoi, RA (2002) Damage Location and Identification Using Infra-Red Thermography and Thermoelastic Stress Analysis. In
Non-Destructive Evaluation and Health Monitoring of Aerospace Materials, Proceedings of SPIE, Newport Beach, California, USA, pp.93-103.
Cunningham, P, Millar, DMA, White, RG (2000) High Intensity Acoustic Testing of Doubly Curved Composite Sandwich Panels. In
7th International Conference on Recent Advances in Structural Dynamics, Southampton, UK, pp.801-813.
Cunningham, P and White, RG (1999) Free Vibration of Doubly Curved Composite Honeycomb Rectangular Sandwich Panels. In
17th International Modal Analysis Conference, Kissimmee, Florida, USA, pp.65-71.
