Journal Articles

Bin-Mat-Arishad, I, Wimarshana, B, Fly, A (2023) Influence of voltage profile and fitting technique on the accuracy of lithium-ion battery degradation identification through the Voltage Profile Model, Journal of Energy Storage, 70, DOI: 10.1016/j.est.2023.107884.

He, H, Chen, X, Fly, A, Saini, V (2023) A Fast Activation Energy Derivation (FAED) approach for Lumped Single Particle model in lithium-ion battery module-level heat generation prediction, Journal of Power Sources, 580, pp.233431-233431, ISSN: 0378-7753. DOI: 10.1016/j.jpowsour.2023.233431.

Roy, PK, Shahjalal, M, Shams, T, Fly, A, Stoyanov, S, Ahsan, M, Haider, J (2023) A Critical Review on Battery Aging and State Estimation Technologies of Lithium-Ion Batteries: Prospects and Issues, Electronics, 12(19), pp.4105-4105, DOI: 10.3390/electronics12194105.

Wimarshana, B, Bin-Mat-Arishad, I, Fly, A (2023) A multi-step parameter identification of a physico-chemical lithium-ion battery model with electrochemical impedance data, Journal of Power Sources, 580, 233400, ISSN: 0378-7753. DOI: 10.1016/j.jpowsour.2023.233400.

Kumaresan, T, Palaniswamy, K, Fly, A, Sundaram, S (2022) Studies on anode mass composition and cathode flow field design for small-scale to large-scale direct methanol fuel cell stack systems, AIP Advances, 12(12), 125316, DOI: 10.1063/5.0121729.

Chakraborty, S, Elangovan, D, Palaniswamy, K, Fly, A, Ravi, D, Seelan, DAS, Rajagopal, TKR (2022) A review on the numerical studies on the performance of proton exchange membrane fuel cell (PEMFC) flow channel designs for automotive applications, Energies, 15(24), 9520, DOI: 10.3390/en15249520.

Huang, Z, Best, M, Knowles, J, Fly, A (2022) Adaptive piecewise equivalent circuit model with SOC/SOH estimation based on extended Kalman filter, IEEE Transactions on Energy Conversion, 38(2), pp.959-970, ISSN: 0885-8969. DOI: 10.1109/TEC.2022.3218613.

Broad, R and Fly, A (2022) Influence of geometrical manufacturing tolerances on lithium‐ion battery performance, International Journal of Energy Research, 46(15), pp.23824-23838, ISSN: 0363-907X. DOI: 10.1002/er.8680.

Fly, A, Senake-Ralalage, B, Bin-Mat-Arishad, I, Sarmiento-Carnevali, M (2022) Temperature dependency of diagnostic methods in lithium-ion batteries, Journal of Energy Storage, 52(Part A), 104721, ISSN: 2352-152X. DOI: 10.1016/j.est.2022.104721.

Senake-Ralalage, B, Bin-Mat-Arishad, I, Fly, A (2022) Parameter sensitivity analysis of a physico-chemical lithium-ion battery model with combined discharge voltage and electrochemical impedance data, Journal of Power Sources, 527, 231125, ISSN: 0378-7753. DOI: 10.1016/j.jpowsour.2022.231125.

Shahjalal, M, Roy, PK, Shams, T, Fly, A, Chowdhury, JI, Ahmed, MR, Liu, K (Accepted for publication) A review on second-life of Li-ion batteries: prospects, challenges, and issues, Energy, 241, ISSN: 0360-5442. DOI: 10.1016/j.energy.2021.122881.

Fly, A, Kirkpatrick, I, Chen, R (2021) Low temperature performance evaluation of electrochemical energy storage technologies, Applied Thermal Engineering, 189, 116750, ISSN: 1359-4311. DOI: 10.1016/j.applthermaleng.2021.116750.

Kumaresan, T, Velumani, T, Chandran, M, Palaniswamy, K, Thirkell, A, Fly, A, Chen, R, Sundaram, S (2020) Effect of Nafion loading and the novel flow field designs on innovative anode electrocatalyst for improved Direct Methanol Fuel cells performance, Materials Letters, 276, 128222, ISSN: 0167-577X. DOI: 10.1016/j.matlet.2020.128222.

Steffen, T, Fly, A, Mitchell, W (2020) Optimal electric vehicle charging considering the effects of a financial incentive on battery ageing, Energies, 13(18), 4742, DOI: 10.3390/en13184742.

Fly, A and Chen, R (2020) Rate dependency of incremental capacity analysis (dQ/dV) as a diagnostic tool for lithium-ion batteries, Journal of Energy Storage, 29, 101329, ISSN: 2352-152X. DOI: 10.1016/j.est.2020.101329.

Thiagarajan, V, Karthikeyan, P, Thanarajan, K, Neelakrishnan, S, Manoharan, R, Chen, R, Fly, A, Anand, R, Raj, TRK, Kumar, NS (2019) Experimental investigation on DMFCs using reduced noble metal loading with NiTiO3 as supportive material to enhance cell performances, International Journal of Hydrogen Energy, ISSN: 0360-3199. DOI: 10.1016/j.ijhydene.2019.03.244.

Fly, A, Kim, K, Gordon, J, Butcher, D, Chen, R (2019) Liquid water transport in porous metal foam flow-field fuel cells: a two-phase numerical modelling and ex-situ experimental study, Energies, 12, ISSN: 1996-1073. DOI: 10.3390/en12071186.

Fly, A, Meyer, Q, Whiteley, M, Iacoviello, F, Neville, T, Shearing, PR, Brett, DJL, Kim, C, Chen, R (2019) X-ray tomography and modelling study on the mechanical behaviour and performance of metal foam flow-fields for polymer electrolyte fuel cells, International Journal of Hydrogen Energy, ISSN: 0360-3199. DOI: 10.1016/j.ijhydene.2019.01.206.

Fly, A, Butcher, D, Meyer, Q, Whiteley, M, Spencer, A, Kim, CS, Shearing, P, Brett, DJL, Chen, R (2018) Characterisation of the diffusion properties of metal foam hybrid flow-fields for fuel cells using optical flow visualisation and x-ray computed tomography, Journal of Power Sources, 395, pp.171-178, ISSN: 0378-7753. DOI: 10.1016/j.jpowsour.2018.05.070.

Fly, A, Chen, R, Wang, X (2018) Equivalent stiffness model of a proton exchange membrane fuel cell stack including hygrothermal effects and dimensional tolerances, Journal of Electrochemical Energy Conversion and Storage, 15(3), ISSN: 2381-6872. DOI: 10.1115/1.4039141.

Jinuntuya, F, Whiteley, M, Chen, R, Fly, A (2017) The effects of gas diffusion layers structure on water transportation using X-ray computed tomography based Lattice Boltzmann method, Journal of Power Sources, 378, pp.53-65, ISSN: 0378-7753. DOI: 10.1016/j.jpowsour.2017.12.016.

Fly, A and Thring, R (2016) A comparison of evaporative and liquid cooling methods for fuel cell vehicles, International Journal of Hydrogen Energy, 41(32), pp.14217-14229, ISSN: 0360-3199. DOI: 10.1016/j.ijhydene.2016.06.089.

Dunnett, SJ, Whiteley, M, Fly, A, Leigh, J, jackson, L (2015) Advanced reliability analysis of Polymer Electrolyte Membrane Fuel Cells using Petri-Net analysis and Fuel Cell modelling techniques., International Journal of Hydrogen Energy, 40(35), pp.11550-1158, DOI: 10.1016/j.ijhydene.2015.01.154.

Fly, A and Thring, R (2015) Temperature regulation in an evaporatively cooled proton exchange membrane fuel cell stack, International Journal of Hydrogen Energy, ISSN: 0360-3199. DOI: 10.1016/j.ijhydene.2015.04.086.

Fly, A and Thring, RH (2013) System thermal and water balance in an evaporatively cooled PEM fuel cell vehicle, Institution of Mechanical Engineers - VTMS 2011, Vehicle Thermal Management Systems Conference Proceedings, pp.267-277, DOI: 10.1533/9780857094735.6.267.

Conferences

Mickelson, S, Steffen, T, Fly, A, Jiang, J (2023) Electric Vehicle Smart Charging Considering Fluctuating Electrical Grid Pricing and Extreme Weather. In , SAE Technical Papers. DOI: 10.4271/2023-01-0709.

Steffen, T, Fly, A, Stobart, R (2022) Project-Based Learning for Control of Hybrid Powertrains using a Simulation Model. In IFAC Advances in Control Education, Hamburg.

Sarmiento-Carnevali, M, Fly, A, Piecha, P (2020) Electric vehicle cold start range estimation through battery-in-loop simulations within a virtual driving environment. In SAE Technical Papers, pp.2020-01, DOI: 10.4271/2020-01-0453.

Sarmiento-Carnevali, ML, Fly, A, Batlle, C, Serra, M, Thring, RH (2016) Model predictive control for water balance in an evaporatively cooled PEM fuel cell system. In , WHEC 2016 - 21st World Hydrogen Energy Conference 2016, Proceedings, pp.638-639.

Whiteley, M, Leigh, J, Fly, A, Jackson, LM, Dunnett, SJ (2015) Using Petri-Net analysis for advanced reliability analysis of polymer electrolyte membrane fuel cells. In , Safety and Reliability: Methodology and Applications - Proceedings of the European Safety and Reliability Conference, ESREL 2014, pp.2147-2154, ISBN: 9781138026810. DOI: 10.1201/b17399-293.

Whiteley, M, Fly, A, Leigh, J, Jackson, L, Dunnett, S (2015) Reliability modelling using Petri-Net simulation of polymer electrolyte membrane fuel cell degradation in automotive applications. In 2015 Annual Reliability and Maintainability Symposium (RAMS). DOI: 10.1109/rams.2015.7105164.

Fly, A and Thring, RH (2015) Model based investigation of liquid water injection strategies for evaporatively cooled PEM fuel cells. In , ASME 2015 13th International Conference on Fuel Cell Science, Engineering and Technology, FUELCELL 2015, collocated with the ASME 2015 Power Conference, the ASME 2015 9th International Conference on Energy Sustainability, and the ASME 2015 Nuclear Forum,ISBN: 9780791856611. DOI: 10.1115/FUELCELL201549196.

Fly, A and Thring, RH (2014) Temperature regulation of an evaporatively cooled PEMFC stack. In , 20th World Hydrogen Energy Conference, WHEC 2014, pp.667-674, ISBN: 9780000000002.

Whiteley, M, Leigh, J, Fly, A, Jackson, L, Dunnett, S (2014) Advanced reliability analysis of Polymer Electrolyte Membrane Fuel Cells using Petri-Net analysis and Fuel Cell modelling techniques. In 20th World Hydrogen Energy Conference, WHEC 2014, pp.675-682, ISBN: 9781634396554.

Fly, A and Thring, RH (2014) Condensation of water from saturated air in a compact plate condenser with application to water balance in proton exchange membrane fuel cell systems. In , Proceedings of the 15th International Heat Transfer Conference, IHTC 2014.

Chapters

Whiteley, M, Leigh, J, Fly, A, Jackson, LM, Dunnett, SJ (2014) Using Petri-Net analysis for advanced reliability analysis of polymer electrolyte membrane fuel cells. In Safety and Reliability: Methodology and Applications, pp.2147-2154, ISBN: 9781138026810.

Internet Publications

Fly, A, Ralalage, BS, Bin-Mat-Arishad, I (Accepted for publication) Underlying data: A Multi-Step Parameter Identification of a Physico-Chemical Lithium-ion Battery Model with Electrochemical Impedance Data.

Software

Fly, A and Broad, R (Accepted for publication) Underlying data: Influence of geometrical manufacturing tolerances on lithium-ion battery performance.

Thesis/Dissertation

Fly, A (2015) Thermal and water management of evaporatively cooled fuel cell vehicles.

Datasets

Fly, A, Senake-Ralalage, B, Bin-Mat-Arishad, I, Sarmiento-Carnevali, M (2023) Supplementary information files for Temperature dependency of diagnostic methods in lithium-ion batteries, DOI: 10.17028/rd.lboro.23593530.

Fly, A, Senake-Ralalage, B, Bin-Mat-Arishad, I, Sarmiento-Carnevali, M (2023) Supplementary information files for Temperature dependency of diagnostic methods in lithium-ion batteries, DOI: 10.17028/rd.lboro.23652792.

Fly, A, Arishad, IBM, Senake-Ralalage, B (2023) Underlying data: Influence of voltage profile and fitting technique on the accuracy of lithium-ion battery degradation identification through an Open-Circuit-Voltage Model, DOI: 10.17028/rd.lboro.22093589.

Kumaresan, T, Palaniswamy, K, Fly, A, Sundaram, S (2023) Supplementary information files for Studies on anode mass composition and cathode flow field design for small-scale to large-scale direct methanol fuel cell stack systems, DOI: 10.17028/rd.lboro.21961055.

Broad, R and Fly, A (2022) Supplementary information files for Influence of geometrical manufacturing tolerances on lithium‐ion battery performance, DOI: 10.17028/rd.lboro.21408786.

Fly, A, Senake-Ralalage, B, Bin-Mat-Arishad, I, Sarmiento-Carnevali, M (2022) Underlying data: Temperature dependency of diagnostic methods in lithium-ion batteries, DOI: 10.17028/rd.lboro.14883903.

Senake-Ralalage, B, Fly, A, Bin-Mat-Arishad, I (2022) Parameter Sensitivity Analysis of a Physico-Chemical Lithium-ion Battery Model with Combined Discharge Voltage and Electrochemical Impedance Data - Dataset, DOI: 10.17028/rd.lboro.17064491.

Fly, A, Kirkpatrick, I, Chen, R (2021) Supplementary data for: Low temperature performance evaluation of electrochemical energy storage technologies, DOI: 10.17028/rd.lboro.12662330.

Fly, A and Chen, R (2020) Rate dependency of incremental capacity analysis (dQ/dV) as a diagnostic tool for lithium-ion batteries (supplementary information), DOI: 10.17028/rd.lboro.7637921.

Fly, A, Chen, R, Gordon, J, Butcher, D, Kim, K (2019) Supplementary information files for article: 'Liquid water transport in porous metal foam flow-field fuel cells: a two-phase numerical modelling and ex-situ experimental study', DOI: 10.17028/rd.lboro.7775843.

Fly, A, Meyer, Q, Whiteley, M, Iacoviello, F, Neville, T, Shearing, PR, Dan J. L. Brett, DJLB, Kim, C-S, Chen, R (2019) Supplementary data for: "X-ray tomography and modelling study on the mechanical behaviour and performance of metal foam flow-fields for polymer electrolyte fuel cells", DOI: 10.17028/rd.lboro.7560476.

Filesets

Fly, A, Butcher, D, Meyer, Q, Whiteley, M, Spencer, A, Kim, C-S, Shearing, PR, Dan J. L. Brett, DJLB, Chen, R (2019) Supporting video files: "Characterisation of the diffusion properties of metal foam hybrid flow-fields for fuel cells using optical flow visualisation and X-ray computed tomography", DOI: 10.17028/rd.lboro.5794656.

Fly, A and Chen, R (2018) Equivalent Stiffness Model of a PEM Fuel Cell, DOI: 10.17028/rd.lboro.5011631.