Journal Articles
Yuan, B, Harvey, C, Shen, K, Thomson, R,
Critchlow, G, Rickerby, D, Yu, S, Wang, S (2021)
Swelling-induced telephone cord blisters in hydrogel films,
Composite Structures, 280, 114909, ISSN: 0263-8223. DOI:
10.1016/j.compstruct.2021.114909.
Bagiatis, V,
Critchlow, G, Price, D, Wang, S, Harvey, C, Yuan, B (2021)
Thermally induced strain in joints with dissimilar adherends bonded with a flexible adhesive,
International Journal of Adhesion and Adhesives, 107, 102853, ISSN: 0143-7496. DOI:
10.1016/j.ijadhadh.2021.102853.
Bagiatis, V,
Critchlow, GW, Price, D, Wang, S (2019)
The effect of atmospheric pressure plasma treatment (APPT) on the adhesive bonding of poly(methyl methacrylate) (PMMA)-to-glass using a polydimethylsiloxane (PDMS)-based adhesive,
International Journal of Adhesion and Adhesives, 95, ISSN: 0143-7496. DOI:
10.1016/j.ijadhadh.2019.102405.
Yuan, B, Harvey, C, Thomson, R,
Critchlow, G, Rickerby, D, Wang, S (2019)
A new spallation mechanism of thermal barrier coatings and a generalized mechanical model,
Composite Structures, 227, 111314, ISSN: 0263-8223. DOI:
10.1016/j.compstruct.2019.111314.
Yuan, B, Harvey, C, Thomson, R,
Critchlow, G, Rickerby, DS, Wang, S (2019)
Spontaneous formation and morphology of telephone cord blisters in thin films: The Ω formulae,
Composite Structures, 225, 111108, ISSN: 0263-8223. DOI:
10.1016/j.compstruct.2019.111108.
Harvey, C, Wang, S, Yuan, B, Thomson, R,
Critchlow, G (2018)
Determination of mode I and II adhesion toughness of monolayer thin films by circular blister tests,
Theoretical and Applied Fracture Mechanics, ISSN: 0167-8442. DOI:
10.1016/j.tafmec.2018.01.006.
Yuan, B, Harvey, C, Thomson, R,
Critchlow, G, Wang, S (2018)
A new spallation mechanism of thermal barrier coatings on aero-engine turbine blades,
Theoretical and Applied Mechanics Letters, ISSN: 2095-0349. DOI:
10.1016/j.taml.2018.01.007.
West, JOF,
Critchlow, GW, Lake, DR, Banks, R (2016)
Development of a superhydrophobic polyurethane-based coating from a two-step plasma-fluoroalkyl silane treatment,
International Journal of Adhesion and Adhesives, 68, pp.195-204, ISSN: 0143-7496. DOI:
10.1016/j.ijadhadh.2016.03.007.
Carbas, RJC, Viana, GMSO, da Silva, LFM,
Critchlow, GW (2015)
Functionally Graded Adhesive Patch Repairs of Wood Beams in Civil Applications,
Journal of Composites for Construction, 19(2), ISSN: 1090-0268. DOI:
10.1061/(asce)cc.1943-5614.0000500.
Carbas, RJC, Da Silva, LFM, Madureira, ML,
Critchlow, GW (2014)
Modelling of functionally graded adhesive joints,
Journal of Adhesion, 90(8), pp.698-716, ISSN: 0021-8464. DOI:
10.1080/00218464.2013.834255.
Carbas, RJC, Da Silva, LFM,
Critchlow, GW (2014)
Adhesively bonded functionally graded joints by induction heating,
International Journal of Adhesion and Adhesives, 48, pp.110-118, ISSN: 0143-7496. DOI:
10.1016/j.ijadhadh.2013.09.045.
Mubashar, A, Ashcroft, IA,
Critchlow, GW, Crocombe, AD (2011)
Strength prediction of adhesive joints after cyclic moisture conditioning using a cohesive zone model,
ENGINEERING FRACTURE MECHANICS, 78(16), pp.2746-2760, ISSN: 0013-7944. DOI:
10.1016/j.engfracmech.2011.07.010.
Mubashar, A, Ashcroft, IA,
Critchlow, GW, Crocombe, AD (2011)
A Method of Predicting the Stresses in Adhesive Joints after Cyclic Moisture Conditioning,
JOURNAL OF ADHESION, 87(9), pp.926-950, ISSN: 0021-8464. DOI:
10.1080/00218464.2011.600675.
Lewis, OD,
Critchlow, GW, Wilcox, GD, deZeeuw, A, Sander, J (2011) A study of the corrosion resistance of a waterborne acrylic coating modified with nano-sized titanium dioxide,
Progress in Organic Coatings, ISSN: 0300-9440.
Yu, S, Tong, MN,
Critchlow, G (2010)
Use of carbon nanotubes reinforced epoxy as adhesives to join aluminum plates,
Materials and Design, 31(SUPPL. 1), ISSN: 0264-1275. DOI:
10.1016/j.matdes.2009.11.045.
Shenoy, V, Ashcroft, IA,
Critchlow, GW, Crocombe, AD (2010)
Fracture mechanics and damage mechanics based fatigue lifetime prediction of adhesively bonded joints,
Engineering Fracture Mechanics, 77(7), pp.1073-1090.
Cree, AM, Devlin, M,
Critchlow, GW, Hirst, T (2010)
Fatigue and fracture assessment of toxic metal replacement coatings for aerospace applications,
Transactions of the Institute of Metal Finishing, 88(6), pp.303-310.
Critchlow, GW and Caborn, A (2010) State-of-the-art surface treatments for structural metal bonding,
Welding and Cutting, 9(3), pp.144-148.
Ashcroft, IA, Shenoy, V,
Critchlow, GW, Crocombe, AD (2010) A comparison of the prediction of fatigue damage and crack growth in adhesively bonded joint using fracture mechanics and damage mechanics progressive damage methods,
Journal of Adhesion, 86(12), pp.1203-1230.
Yu, S, Tong, MN,
Critchlow, GW (2010)
Use of carbon nanotubes reinforced epoxy as adhesives to join aluminium plates,
Materials and Design, 31(Suppl.1), pp.S126-S129.
Ana, UJ,
Critchlow, GW, Ford, KM, Godfrey, NR, Grandy, DB, Spence, MA (2010)
A preliminary investigation into the apparent abhesive effect of stearic acid on cured silicone elastomer,
International Journal of Adhesion and Adhesives, 30(8), pp.781-788.
Shenoy, V, Ashcroft, IA,
Critchlow, GW, Crocombe, AD (2010)
Unified methodology for the prediction of the fatigue behaviour of adhesively bonded joints,
International Journal of Fatigue, 32(8), pp.1278-1288.
Black, K, Jones, AC, Bacsa, J, Chalker, PR, Marshall, PA, Davies, HO, Heys, PN,
Critchlow, GW (2010) Investigation of new 2.5-dimethylpyrrolyl titanium alkylamide and alkoxide complexes as precursors for the liquid injection mocvd of TiO2,
Chemical Vapor Deposition, 16(1-3), pp.93-99.
Yendall, KA and
Critchlow, GW (2009)
Novel methods, incorporating pre- and post-anodising steps, for the replacement of the Bengough-Stuart chromic acid anodising process in structural bonding applications,
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 29(5), pp.503-508, ISSN: 0143-7496. DOI:
10.1016/j.ijadhadh.2008.11.001.
Ansarifar, A,
Critchlow, GW, Ellis, RJ, Haile Meskel, Y, Doyle, B, Guo, R (2009) Assessing Effect of the Migration of a Paraffin Wax on the Surface Free Energy of Natural Rubber,
Rubber Chemistry and Technology, 82, pp.113-120, ISSN: 0035-9475.
Chapaneri, R, Ebbage, AJ, Wilcox, GD,
Critchlow, GW, Chojnicki, A, Pearson, T, Rowan, AJ (2009) Effect of Heat Treatment on Promoting Zinc Whisker Growth from Bright Zinc Electrodeposited Coatings,
Transactions of the Institute of Metal Finishing, 87, pp.159-162.
Lewis, OD,
Critchlow, GW, Wilcox, GD (2009) The Role of Surface Cleaning as a Preliminary to Satisfactory Coating Application,
Corrosion Management, May/June(89), pp.11-16.
da Silva, LFM, Carbas, RJC,
Critchlow, GW, Figueiredo, MAV, Brown, K (2009)
Effect of Material, Geometry, Surface Treatment and Environment on the Shear Strength of Single Lap Joints,
International Journal of Adhesion & Adhesives, 29, pp.621-632.
Mubashar, A, Ashcroft, IA,
Critchlow, GW, Crocombe, AD (2009)
Modelling cyclic moisture uptake in an epoxy adhesive,
Journal of Adhesion, 85(10), pp.711-735.
Mubashar, A, Ashcroft, IA,
Critchlow, GW, Crocombe, AD (2009)
Moisture absorption-desorption effects in adhesive joints,
International Journal of Adhesion and Adhesives, 29(8), pp.751-760, DOI:
10.1016/j.ijadhadh.2009.05.001.
Shenoy, V, Ashcroft, IA,
Critchlow, GW, Abdel Wahab, MM (2009)
An investigation into the crack initiation and propagation behaviour of bonded single lap joints using backface strain,
International Journal of Adhesion and Adhesives, 29(4), pp.361-371, DOI:
10.10126/j.ijadhadh.2008.07.008.
Shenoy, V, Ashcroft, IA,
Critchlow, GW, Crocombe, AD, Abdel Wahab, MM (2009)
Strength wearout of adhesively bonded joints under constant amplitide fatigue,
International Journal of Fatigue, 31(5), pp.820-830, DOI:
10.1016/j.ijfatigue.2008.11.007.
Shenoy, V, Ashcroft, IA,
Critchlow, GW, Crocombe, AD, Abdel Wahab, MM (2009)
An evaluation of strength wearout models for the lifetime prediction of adhesive joints subjected to variable amplitude fatigue,
International Journal of Adhesion and Adhesives, 29(6), pp.639-649, DOI:
10.1016/j.ijadhadh.2009.02.008.
Critchlow, GW, Litchfield, R, Curtis, C, Owen, M (2009)
Hot and cold cleaning methods: CO2 and Nd:YAG laser ablation, sodium hydride immersion and CO2 cryoblasting,
Transactions of the Institute of Metal Finishing, 87(6), pp.284-286.
Yu, S, Tong, MN,
Critchlow, GW (2009) Wedge test of carbon-nanotube-reinforced epoxy adhesive joints,
Journal of Applied Polymer Science, 111(6), pp.2957-2962.
Yu, S, Tong, MN,
Critchlow, G (2009)
Wedge test of carbon‐nanotube‐reinforced epoxy adhesive joints,
Journal of Applied Polymer Science, 111(6), pp.2957-2962, ISSN: 0021-8995. DOI:
10.1002/app.29294.
Chung, PP, Cantwell, PA, Wilcox, GD,
Critchlow, GW (2008)
Electrodeposition of Zinc-Manganese Alloy Coatings from Ionic Liquid Electrolytes,
Transactions of the Institute of Metal Finishing, 86, pp.211-219, DOI:
10.1179/174591908X327473.
Da Silva, LFM,
Critchlow, GW, Figueiredo, MAV (2008) Parametric study of adhesively bonded single lap joints by the taguchi method,
Journal of Adhesion Science and Technology, 22(13), pp.1477-1494.
Ansarifar, A,
Critchlow, GW, Guo, R, Ellis, RJ, Kirtley, SP, Seymour, B (2007) Effect of Rubber Chemicals on the Surface Free Energy of NR and NR-SBR Rubber Blends,
Journal of Rubber Research, 10(3), pp.148-160, ISSN: 1511-1768.
Ansarifar, A,
Critchlow, GW, Guo, R, Ellis, RJ, Kirtley, SP, Seymour, B (2007) Effect of rubber chemicals on the surface free energy of NR and NR-SBR rubber blends,
Journal of Rubber Research, 10(3), pp.148-160.
Critchlow, GW, Litchfield, RE, Sutherland, I, Grandy, DB, Wilson, S (2006)
A Review and Comparative Study of Release Coatings for Optimised Abhesion in Resin Transfer Moulding Applications,
International Journal of Adhesion and Adhesives, 26(8), pp.577-599, ISSN: 0143-7496. DOI:
10.1016/j.ijadhadh.2005.09.003.
Hollingsworth, N, Horley, GA, Mazhar, M, Mahon, MF, Molloy, KC, Haycock, PW, Myers, CP,
Critchlow, GW (2006)
Tin(II) Aminoalkoxides and Heterobimetallic Derivatives: the Stuctures of Sn6(O)4(dmae)(4), Sn6(O)4(OEt)4 and [Sn(dmae)(2)Cd(acac)(2)](2),
Applied Organometallic Chemistry, 20(10), pp.687-695, ISSN: 0268-2605. DOI:
10.1002/aoc.1118.
Critchlow, GW, Yendall, KA, Bahrani, D, Quinn, A, Andrews, F (2006)
Strategies for the Replacement of Chromic Acid Anodising for the Structural Bonding of Aluminium Alloys,
International Journal of Adhesion and Adhesives, 26(6), pp.419-453, ISSN: 0143-7496. DOI:
10.1016/j.ijadhadh.2005.07.001.
Litchfield, RE,
Critchlow, GW, Wilson, S (2006)
Surface Cleaning Technologies for the Removal of Crosslinked Epoxide Resin,
International Journal of Adhesion and Adhesives, 26(5), pp.295-303, ISSN: 0143-7496. DOI:
10.1016/j.ijadhadh.2005.05.001.
Gaskell, JM, Jones, AC, Aspinall, HC, Przybylak, S, Chalker, PR, Black, K, Davies, HO, Taechakumput, P, Taylor, S,
Critchlow, GW (2006) Liquid Injection ALD and MOCVD of Lanthanum Aluminate using a Bimetallic Alkoxide Precursor,
Journal of Materials Chemistry, 16, pp.3854-3860.
Critchlow, GW, Litchfield, RE, Sutherland, I, Grandy, DB, Wilson, S (2006) A review and comparative study of release coatings for optimised abhesion in resin transfer moulding applications,
International Journal of Adhesion and Adhesives, 26(8), pp.577-599.
Aspinall, HC, Gaskall, JM, Loo, YF, Jones, AC, Chalker, PR, Potter, RJ, Smith, LM,
Critchlow, GW (2005) Growth of Gadolinium Thin Films by Liquid Injection MOCVD using a New Gadolinium Alkoxide Precursor,
Chemical Vapor Deposition, 10(6), pp.301-305.
Loo, YF, Potter, RL, Jones, AC, Aspinall, HC, Gaskell, JM, Chalker, PR, Smith, LM,
Critchlow, GW (2005) Growth of Neodymium Oxide Thin films by Liquid Injection MPCVD using a New Neodymium Oxide Precursor,
Chemical Vapour Deposition, 10(6), pp.306-310.
Critchlow, GW (2005) Accelerated Ageing,
Handbook of Adhesion, Second Edition, pp.3-5.
Critchlow, GW (2005) Conversion Coatings,
Handbook of Adhesion, Second Edition, pp.86-88.
Critchlow, GW (2005) Durability:Fundamentals,
Handbook of Adhesion, pp.119-120.
Critchlow, GW (2005) Pretreatment of Aluminium,
Handbook of Adhesion, pp.368-371.
Critchlow, GW (2005) Pretreatment of Metals Prior to Bonding,
Handbook of Adhesion, Second Edition, pp.373-376.
Critchlow, GW (2005) Pretreatment of Titanium,
Handbook of Adhesion, Second Edition, pp.379-380.
Potter, RJ, Chalker, PR, Manning, TD, Aspinall, HC, Loo, YF, Jones, AC, Smith, LM,
Critchlow, GW, Schumacher, M (2005) Deposition of HfO₂, Gd₂O₃ and PrOₓ by Liquid Injection ALD Techniques,
Chemical Vapor Deposition, 11(3), pp.159-169.
Manning, TD, Loo, YF, Jones, AC, Aspinall, HC, Chalker, PR, Bickley, JF, Smith, LM,
Critchlow, GW (2005) Depostion of LaAl03 Films by Liquid Injection MOCVD using a New [La-AL] Precursor,
Journal of Materials Chemistry, 15(33), pp.3384-3387.
Aspinall, HC, Gaskell, JM, Loo, YF, Jones, AC, Chalker, PR, Potter, RJ, Smith, LM,
Critchlow, GW (2004)
Growth of gadolinium oxide thin films by liquid injection MOCVD using a new gadolinium alkoxide precursor,
CHEMICAL VAPOR DEPOSITION, 10(6), pp.301-305, ISSN: 0948-1907. DOI:
10.1002/cvde.200306310.
Loo, YF, Potter, RL, Jones, AC, Aspinall, HC, Gaskell, JM, Chalker, PR, Smith, LM,
Critchlow, GW (2004)
Growth of neodymium oxide thin films by liquid-injection MOCVD using a new neodymium alkoxide precursor,
CHEMICAL VAPOR DEPOSITION, 10(6), pp.306-310, ISSN: 0948-1907. DOI:
10.1002/cvde.200406313.
Jones, AC, Tobin, NL, Marshall, PA, Potter, RJ, Chalker, PR, Bickley, JF, Davies, HO, Smith, LM,
Critchlow, GW (2004) Synthesis and Characterisation of Four New Heterometal Alkoxides: Potential Precursors for the MOCVD of Ferroelectric Oxides,
Journal of Materials Chemistry, 14(5), pp.887-894.
Jones, AC, Tobin, NL, Marshall, PA, Potter, RJ, Chalker, PR, Bickley, JF, Davies, HO, Smith, LM,
Critchlow, GW (2004)
Synthesis and characterisation of four new heterometal alkoxides: potential precursors for the MOCVD of ferroelectric oxides,
JOURNAL OF MATERIALS CHEMISTRY, 14(5), pp.887-894, ISSN: 0959-9428. DOI:
10.1039/b312697h.
Aspinall, HC, Gaskell, J, Williams, PA, Jones, AC, Chalker, PR, Marshall, PA, Smith, LM,
Critchlow, GW (2004)
Growth of Praseodymium Oxide and Praseodymium Silicate Thin Films by Liquid Injection MOCVD,
Chemical Vapor Deposition, 10(2), pp.83-89, ISSN: 0948-1907. DOI:
10.1002/cvde.200306282.
Aspinall, HC, Gaskell, J, Williams, PA, Jones, AC, Chalker, PR, Marshall, PA, Smith, LM,
Critchlow, GW (2004) Growth of Lanthanum Oxide Thin Films by Liquid Injection MOCVD using a Novel Lanthanum Alkoxide Precursor,
Chemical Vapour Deposition, 10(1), pp.13-+.
Roberts, JL, Marshall, PA, Jones, AC, Chalker, PR, Bickley, JF, Williams, PA, Taylor, S, Smith, LM,
Critchlow, GW, Schumacher, M, Lindner, J (2004) Deposition of Hafnium Silicate Films by Liquid Injection MOCVD using a Single Source or Dual Source Approach,
Journal of Materials Chemistry, 14(3), pp.391-395.
Houlton, DJ, Jones, AC, Haycock, PW, Williams, EW, Bull, J,
Critchlow, GW (2004) The Deposition of Platinum-Containing Tin Oxide Thin Films by Metal-Organic CVD,
Chemical Vapor Deposition, 1(1), pp.26-28.
Jones, AC, Houlton, DJ, Rushwarth, SA, Flanagan, JA, Brown, JR,
Critchlow, GW (2004) The Deposition of Aluminium Thin Films by CVD using a Novel Adduct of Dimethylaluminium Hydride,
Chemical Vapor Deposition, 1(1), pp.24-26.
Marshall, PA, Potter, RJ, Jones, AC, Chalker, PR, Taylor, S,
Critchlow, GW, Rushworth, SA (2004) Growth of Hafnium Aluminate Thin Films by Liquid Injection MPCVD using Alkoxide Precursors,
Chemical Vapour Deposition, 10(5), pp.275-279.
Williams, PA, Jones, AC, Tobin, NL, Chalker, PR, Taylor, S, Marshall, PA, Bickley, JF, Smith, LM, Davies, HO,
Critchlow, GW (2003) Growth of Hafnium Dioxide Thin Films by Liquid-Injection MOCVD Using Alkylamide and Hydroxylamide Precursors,
Advanced Materials, 15(24), pp.309-314, ISSN: 0935-9648.
Williams, PA, Jones, AC, Tobin, NL, Chalker, PR, Taylor, S, Marshall, PA, Bickley, JE, Smith, LM, Davies, HO,
Critchlow, GW (2003) Growth of Hafnium Dioxide Thin Films by Liquid-Injection MOCVD using Alkylamide and Hydroxylamide Precursors,
Chemical Vapor Deposition, 9(6), pp.309-314.
Aspinall, HC, Gaskell, J, Williams, PA, Jones, AC, Chalker, PR, Marshall, PA, Bickley, JF, Smith, LM,
Critchlow, GW (2003) Growth of Praseodymium Oxide Thin Films by Liquid Injection MOCVD using a Novel Praseodymium Alkoxide Precursor,
Advanced Materials, 15(20), pp.235-238, ISSN: 0935-9648.
Aspinall, HC, Gaskell, J, Williams, PA, Jones, AC, Chalker, PR, Marshall, PA, Bickley, JF, Smith, LM,
Critchlow, GW (2003) Growth of Praseodymium Oxide Thin Films by Liquid Injection MOCVD using a Novel Praseodymium Alkoxide Precursor,
Chemical Vapor Deposition, 9(5), pp.235-+.
Aspinall, HC, Williams, PA, Gaskell, J, Jones, AC, Roberts, JL, Smith, LM, Chalker, PR,
Critchlow, GW (2003) Growth of lanthanum silicate thin films by liquid injection MOCVD using tris[bis(trimethyisilyl)amido]lanthanum,
Advanced Materials, 15(1), pp.7-10, ISSN: 0935-9648.
Aspinall, HC, Williams, PA, Gaskell, J, Jones, AC, Roberts, JL, Smith, LM, Chalker, PR,
Critchlow, GW (2003) Growth of Lanthanum Silicate Thin Films by Liquid Injection MOCVD using Tris[bis(trimehtylsilyl)amido] Lanthanum,
Chemical Vapor Deposition, 9, pp.7-+.
Brewis, DM and
Critchlow, GW (2002) The use of Surface Analytical Techniques to Understand Adhesion Performance,
Surface Coatings International Part B-Coatings Transactions, 85, pp.39-47.
Williams, PA, Jones, AC, Crosbie, MJ, Wright, PJ, Bickley, JF, Steiner, A, Davies, HO, Leedham, TJ,
Critchlow, GW (2001) Crystal Structure of Bi(OCMe2CH2OMe)(3) and its use in the MOCVD of Bi2O3,
Chemical Vapor Deposition, 7(5), pp.205-209.
Jones, AC, Williams, PA, Bickley, JF, Steiner, A, Davies, HO, Leedham, TJ, Awaluddin, A, Pemble, ME,
Critchlow, GW (2001) Synthesis and Crystal Structures of Two New Titanium Alkoxy-diolate Complexes. Potential Precursors for Oxide Ceramics,
Journal of Materials Chemistry, 11(5), pp.1428-1433.
Critchlow, GW, Webb, PW, Tremlett, CJ, Brown, K (2000) Chemical Conversion Coatings for the Structural Adhesive Bonding of Plain Carbon Steels,
International Journal of Adhesion and Adhesives, 20, pp.113-122, ISSN: 0143-7496.
Smith, B, Brewis, DM,
Critchlow, GW, Dahm, RH (2000) Cleaning Stainless Steel Surfaces to Improve the Adhesion of Photoresist Coatings,
Transactions of the Institute of Metal Finishing, 78(2), pp.56-60.
Critchlow, GW (2000) Surface Analysis for Industry,
Transactions of the Institute of Metal Finishing, 78, B76.
Crosbie, MJ, Wright, PJ, Davies, HO, Jones, AC, Leedham, TJ, O'Brien, P,
Critchlow, GW (1999) MOCVD of Strontium Tantalate Thin Films Using Novel Bimetallic Alkoxide Precursors,
Chemical Vapor Deposition, 5, pp.9-12, ISSN: 0948-1907.
Swallowe, GM,
Critchlow, G, Wimpory, RC, Pirling, T (1999) Direct Measurement of Longitudinal Strains and Stresses Within Single Lap Shear Adhesive Joints Using Neutron Diffraction,
Journal of Adhesion, 70, pp.1-11, ISSN: 0021-8464.
Brewis, DM,
Critchlow, GW, Curtis, CA (1999) Cryoblasting as a Pretreatment to Enhance Adhesion to Aluminium Alloys; an Initial Study,
International Journal of Adhesion and Adhesives, 19, pp.253-255.
Critchlow, GW (1998) Alternatives to Hexavalent Chromium Processes to Enhance the Durability of Bonded Aluminium Joints,
Transactions of the Institute of Metal Finishing, 76(1), pp.B6-B10.
Jensen, JD,
Critchlow, GW, Gabe, DR (1998) A Study on Zn-Fe Alloy Electrodeposition from a Chloride Electrolyte,
Insititute of Metal Finishing Transactions, 76(5), pp.187-191, ISSN: 0020-2967.
Critchlow, G, Bedwell, K, Chamberlain, ME (1998) Pretreatments to Improve the Bondability of Hot Dipped Galvanised Mild Steel,
Transactions of the Institute for Metals Finishing, 76(6), pp.209-212.
Critchlow, G, Bedwell, K, Cottam, CA (1998) The Effectiveness of TEA CO2-Laser Ablation for the Treatment of Hot Dipped Galvanised Mild Steel Prior to Adhesive Bonding,
Transactions of the Institute of Metal Finishing, 76(5), pp.203-206.
Critchlow, GW, Bedwell, K, Chamberlain, ME (1998) Pretreatments to Improve the Bondability of Hot Dipped Galvanised Mild Steel,
Transactions of the Institute of Metal Finishing, 76(6), pp.209-212.
Critchlow, GW, Hampshire, J, Kingdon, RJ, Naeem, Z, Smith, AB, Teer, DG (1997) Adhesion of Wear Resistant Hard Coatings to Steel Substrates,
Tribology International, 30(7), pp.499-506, ISSN: 0301-679X.
Critchlow, GW and Waddilove, A (1997) Adhesion Studies at the Institute of Surface Science and Technology, Loughborough University,
Transactions of the Institute of Metal Finishing, 75(3), pp.B64-B65.
Critchlow, GW, Cottam, CA, Brewis, DM, Emmony, DC (1997) Further Studies into the Effectiveness of CO₂ Laser Treatment of Metals for Adhesive Bonding,
International Journal of Adhesion and Adhesives, 17(2), pp.143-150.
Brewis, DM and
Critchlow, GW (1997) Locus of Failure of T-peel Joints Formed Between Aluminium and Various Adhesives,
International Journal of Adhesion and Adhesives, 17, pp.33-38, ISSN: 0143-7496.
Critchlow, GW and Brewis, DM (1997) A Comparison of Chromate-Phosphate and Chromate-Free Conversion Coatings for Adhesive Bonding,
Journal of Adhesion, 61, pp.213-230, ISSN: 0021-8464.
Racheva, TM and
Critchlow, GW (1997) SnO₂ Thin Films Prepared by the Sol-Gel Process,
Thin Solid Films, 292, pp.299-302, ISSN: 0040-6090.
Jones, AC, Rushworth, SA, Houlton, J, Whitehouse, CR, Roberts, JS, Roberts, V,
Critchlow, GW (1996) Deposition of Aluminium Nitride Thin Films by MOCVD from the Trimethylaluminium Ammonia Adduct,
Chemical Vapor Deposition, 2(1), pp.5-8, ISSN: 0948-1907.
Brewis, DM and
Critchlow, GW (1996) The Influence of Surface Treatment on the Durability of Aluminium Epoxide Lap Joints,
Transactions of the Institute of Metal Finishing, 74(6), pp.198-201, ISSN: 0020-2967.
Critchlow, GW and Brewis, DM (1996) Review of Surface Pretreatments for Aluminium Alloys,
International Journal of Adhesion and Adhesives, 16(4), pp.255-275, ISSN: 0143-7496.
Critchlow, GW (1996) Instrumental Techniques for the Surface Analysis of Materials,
Transactions of the Institute for Metals Finishing, 74(3), pp.108-114, ISSN: 0020-2967.
Maddison, A and
Critchlow, G (1996) Surface Analysis and Impact Testing of Chromate-Phosphate Treated Aluminium Alloys,
Journal of Adhesion, 55, pp.273-284.
Critchlow, GW and Brewis, DM (1996)
Review of surface pretreatments for aluminium alloys,
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 16(4), pp.255-275, ISSN: 0143-7496. DOI:
10.1016/S0143-7496(96)00014-0.
Rushworth, SA, Brown, JR, Houlton, DJ, Jones, AC, Roberts, V, Roberts, JS,
Critchlow, GW (1996) Alternative Precursor Systems for the MOCVD of Aluminium Nitride and Gallium Nitride,
Advanced Materials for Optics and Electronics, 6, pp.119-126, ISSN: 1057-9257.
Critchlow, GW and Brewis, DM (1995) Review of Surface Pretreatments for Titanium Alloys,
International Journal of Adhesion and Adhesives, 15(3), pp.161-172.
CRITCHLOW, GW and BREWIS, DM (1995)
INFLUENCE OF SURFACE MACROROUGHNESS ON THE DURABILITY OF EPOXIDE-ALUMINUM JOINTS,
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 15(3), pp.173-176, ISSN: 0143-7496. DOI:
10.1016/0143-7496(95)91628-J.
Houlton, DJ, Jones, AC, Haycock, PW, Williams, EW, Bull, J,
Critchlow, GW (1995)
The deposition of platinum‐containing tin oxide thin films by metal‐organic CVD,
Chemical Vapor Deposition, 1(1), pp.26-28, ISSN: 0948-1907. DOI:
10.1002/cvde.19950010105.
Jones, AC, Houlton, DJ, Rushworth, SA,
Critchlow, GW (1995) A New Route to the Deposition of Al2O3 by MOCVD,
Journal de Physique IV, 5, pp.557-560.
Jones, AC, Houlton, DJ, Rushworth, SA, Flanagan, JA, Brown, JR,
Critchlow, GW (1995) The Deposition of Aluminium Thin Films by CVD Using a Novel Adduct of Dimethylaluminium Hydride,
Chemical Vapour Deposition, 1(1), pp.24-26.
Houlton, DJ, Jones, AC, Haycock, PW, Williams, EW, Bull, J,
Critchlow, GW (1995) The Deposition of Platinum-containing Tin Oxide Thin films by Metal-Organic CVD,
Chemical Vapour Deposition, 1(1), pp.26-29.
Critchlow, GW and Brewis, DM (1995) Influence of Surface Macroroughness on the Durability of Epoxide-Aluminium Joints,
International Journal of Adhesion and Adhesives, 15(3), pp.173-176.
Brewis, DM and
Critchlow, GW (1995) Adhesion and Surface Analysis,
Journal of Adhesion, 54, pp.175-199, ISSN: 0021-8464.
Critchlow, GW, Brewis, DM, Emmony, DC, Cottam, CA (1995) Initial Investigation into the Effectiveness of CO2-laser Treatment of Aluminium for Adhesive Bonding,
International Journal of Adhesion and Adhesives, 15(4), pp.233-236, ISSN: 0143-7496.
Kingdon, RJ,
Critchlow, GW, Teer, DG, Hampshire, J (1995) Optimisation of Continuous Plasma Nitride-Reactive Magnetron Deposition Process for Titanium Nitriding of M2 Steel,
Surface Engineering, 11(4), pp.315-318.
Kingdon, RJ,
Critchlow, GW, Teer, DG, Hampshire, J (1995)
Optimisation of Continuous Plasma Nitride–Reactive Magnetron Deposition Process for Titanium Nitriding of M2 Steel,
Surface Engineering, 11(4), pp.315-318, ISSN: 0267-0844. DOI:
10.1179/sur.1995.11.4.315.
AULD, J, HOULTON, DJ, JONES, AC, RUSHWORTH, SA,
CRITCHLOW, GW (1994)
INVESTIGATIONS INTO THE GROWTH OF ALN BY MOCVD USING TRIMETHYLSILYLAZIDE AS NITROGEN-SOURCE,
JOURNAL OF MATERIALS CHEMISTRY, 4(8), pp.1245-1247, ISSN: 0959-9428. DOI:
10.1039/jm9940401245.
JONES, AC, AULD, J, RUSHWORTH, SA, WILLIAMS, EW, HAYCOCK, PW, TANG, CC,
CRITCHLOW, GW (1994)
THE DEPOSITION OF ALUMINUM NITRIDE THIN-FILMS BY METAL-ORGANIC CVD - AN ALTERNATIVE PRECURSOR SYSTEM,
ADVANCED MATERIALS, 6(3), pp.229-231, ISSN: 0935-9648. DOI:
10.1002/adma.19940060310.
Jones, AC, Auld, J, Rushworth, SA,
Critchlow, GW (1994) Growth of Aluminium Films by Low Pressure Chemical Vapour Deposition using Tritertiarybutylaluminium,
Journal of Crystal Growth, 135, pp.285-289, ISSN: 0022-0248.
Jones, AC, Auld, J, Rushworth, SA, Williams, EW, Haycock, PW, Tang, CC,
Critchlow, GW (1994) The Deposition of Aluminium Nitride Thin Films by Metal-Organic CVD - An Alternative Precursor System,
Advanced Materials, 6(3), pp.229-231.
Auld, J, Houlton, DJ, Jones, AC, Rushworth, SA,
Critchlow, GW (1994) Investigations into the Growth of AIN by MOCVD using Trimethylsilyazide as Nitrogen Source,
Journal of Materials Chemistry, 4(8), pp.1245-1247, ISSN: 0959-9428.
Auld, J, Houlton, DJ, Jones, AC, Rushworth, SA, Malik, MA, O'Brien, P,
Critchlow, GW (1994) Growth of ZnO by MOCVD using Alkylzinc Alkoxides as Single-source Precursors,
Journal of Materials Chemistry, 4(8), pp.1249-1253, ISSN: 0959-9428.
Jones, AC, Auld, J, Rushworth, SA, Houlton, DJ,
Critchlow, GW (1994) Investigations into the Growth of AIN by MOCVD using Tri-tert-butylaluminium as an Alternative Aluminium Source,
Journal of Materials Chemistry, 4(10), pp.1591-1594, ISSN: 0959-9428.
Naeem, Z, Smith, AB, Lamsehchi, M,
Critchlow, GW (1993) Ceramic Coatings Chemically Vapour Deposited on High Speed Steel Substrates: Scratch Adhesion Test Phenomena,
Surface and Interface Analysis, 20, pp.352-356.
Howson, RP, Hall, GW,
Critchlow, GW, Sykes, DE (1992) DC Reactive Sputtering of Transparent Conducting Oxides of Zinc doped with Indium,
Vacuum, 43, pp.167-169, ISSN: 0042-207X.
Kelly, DA, Barnes, CG, Freeman, RW,
Critchlow, GW (1992) Running-in and the Enhancement of Scuffing Resistance,
Proceedings of the Institute of Mechanical Engineers, 206, pp.425-429.
Critchlow, G and Maddison, A (1991) Durability of Adhesive Joints Under Impact Conditions,
Surface and Interface Analysis, 17(7), pp.539-541.
Maddison, A and
Critchlow, G (1966) Surface Analysis and Impact Testing of Chromate-Phosphate Treated Aluminium Alloys,
Journal of Adhesion, 55, pp.273-284, ISSN: 0021-8464.
Conferences
Hamlyn, FE, Harvey, C,
Critchlow, G (2022)
High-velocity impact simulation of bilayer alumina/steel armor. In
5th International Conference on Advanced Materials and Engineering Applications (AMEA 2022), Handan, China.
Yuan, B, Harvey, C, Shen, K, Thomson, R, Critchlow, G, Rickerby, D, Wang, S (Accepted for publication) Telephone cord blisters driven by pockets of energy concentration in multilayer films. In 4th International Conference on Advanced Materials and Engineering Applications (ICAMEA 2021, School of Mechanical and Equipment Engineering, Hebei University of Engineering, Handan, China.
Jones, L, Bukhari, F,
Critchlow, G, Walls, M (2021)
Degradation of hydrophobic anti-soiling coatings: Correlating indoor and outdoor testing. In
2021 IEEE 48th Photovoltaic Specialists Conference (PVSC); 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC), Fort Lauderdale, FL, USA, pp.912-917, ISBN: 9781665419222. DOI:
10.1109/pvsc43889.2021.9518421.
Yuan, B, Harvey, C, Thomson, R,
Critchlow, G, Rickerby, D, Wang, S (2019)
Telephone cord blisters in multilayer thin films [Abstract]. In
6th International Conference on Mechanics of Composites (MECHCOMP6), Porto, Portugal (Virtual Conference).
Harvey, C, Wang, S, Yuan, B, Thomson, R,
Critchlow, G (2019)
Determination of mode I and II adhesion toughness of Monolayer thin films by circular blister tests. In
, Paphos, Cyprus, pp.167-173, ISBN: 9783319919881. DOI:
10.1007/978-3-319-91989-8_38.
Wang, S, Yuan, B, Harvey, C, Thomson, R,
Critchlow, G, Rickerby, DS (2019)
Formation and morphology of telephone cord blisters: The Ω - formulae [Abstract]. In Fantuzzi, AJMFAAFMCMSJAMN (ed)
MECHCOMP 2019. The 5th International Conference on Mechanics of Composites, Lisbon, Portugal, 1-4 July 2019, pp.54-5.
Wang, S, Harvey, C, Yuan, B,
Critchlow, G, Thomson, R (2018)
Thin film properties by blister tests. In
, Paphos, Cyprus, pp.34-38.
Harvey, C, Wang, S, Yuan, B, Thomson, R,
Critchlow, G (2018)
On spallation of EB-PVD thermal barrier coatings on turbine blades. In
, Paphos, Cyprus, pp.1-5.
Yuan, B, Harvey, C, Thomson, R,
Critchlow, G, Wang, S (2017)
The mechanics of interface fracture in layered composite materials: (6) spallation of thermal barrier coatings of turbine blades. In
21st International Conference on Composite Materials, Xi'an, China.
Skemperi, A, Worrall, D,
Critchlow, G, Jinks, P (2016)
A study on the drug deposition mechanisms of surface-treated pMDI canisters. In
Drug Delivery to the Lungs, Edinburgh.
Carbas, RJC, Silva, LFMD,
Critchlow, GW (2015)
Effect of post-cure on adhesively bonded functionally graded joints by induction heating. In
, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, pp.419-430, DOI:
10.1177/1464420714523579.
Cantwell, PA, Chung, PP, Jiang, H, Wilcox, GD,
Critchlow, GW (2009) Cadmium Replacement using Zinc Alloys Electrodeposited from Ionic Liquid Electolytes. In
Proc. IMFAir 2009, RAF Cosford, p.6.
Yendall, KA,
Critchlow, GW, Shenoy, V, Mubashar, A, Ashcroft, IA, Wilcox, GD (2009) Pretreatments for the Optimised Adhesion of Aluminium in Aerospace Applications. In
Proc. IMFAir 2009, RAF Cosford, pp.1-20.
Cantwell, PA, Chung, PP, Jiang, H, Wilcox, GD,
Critchlow, GW (2009)
The Electrodeposition of Zinc Alloys from Ionic Liquid Electrolytes. In
Proc. Eurocorr 2009, Nice, France, pp.1-8.
Chapaneri, R,
Critchlow, GW, Sutherland, I, Wilcox, GD (2008)
An X-ray Photoelectron Spectroscopy Investigation of Chromium Conversion Coatings and Chromium Compounds. In
Proc. Eurocorr 2008, Edinburgh, pp.1-14.
Jiang, H, Ebbage, AJ, Chapaneri, R, Wilcox, GD,
Critchlow, GW (2008)
Effect of Heat Treatment on Zinc Whisker Growth from Electrodeposited Coatings. In
Proc. Eurocorr 2008, Edinburgh, pp.1-3.
Yendall, KA,
Critchlow, GW, Wilcox, GD (2008) Evalustion of the Joint Strength and corrosion Performance of a Novel Anodising Process for the Replacement of Chromic Acid Anodising in Aerospace Applications. In
Proc. Advanced Computational Engineering and eXperimenting (ACE-X), Barcelona, Spain, pp.88-91.
Da Silva, LF, Carbas, RJC,
Critchlow, GW, Figueiredo, MV (2008) Effect of Material and Geometric Parameters on the Shear Strength of Single Lap Joints. In
Proc. Advanced Computational Engineering and eXperimenting (ACE-X), Barcelona, Spain, p.110.
Critchlow, GW and Ana, U (2008) Controlled Adhesion by Low Level Additives in a PDMS-Based Adhesive. In
Proc. Advanced Computational Engineering and eXperimenting (ACE-X), Barcelona, Spain, p.21.
Critchlow, GW, Yendall, KA, Cartwright, T, Ashcroft, IA (2008)
Environmentally-Friendly Surface Treatments. In
Proc. Int. Conf. on Automotive Adhesives, Sealants and Coatings 2008, Stuttgart, Germany, pp.18.1-18.12.
da Silva, LFM,
Critchlow, GW, Figueiredo, MAV (2008)
Parametric Study of Adhesively Bonded Single Lap Joints by the Taguchi Method. In
International Conference on Advanced Computational Engineering and Experimenting, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, Algarve, PORTUGAL, pp.1477-1494, DOI:
10.1163/156856108X309585.
Critchlow, GW, Yendall, KA, Lu, J (2007)
Friendlier Surface Treatments: for Metals. In
Proc. SAA Meeting on Greener Adhesives and Sealants, London, pp.3.1-3.6.
Critchlow, GW, Yendall, KA, Dahm, RH, Cartwright, T, Ashcroft, IA, Shenoy, V (2007) Mechanisms for the Formation of Duplex Oxides for the Bonding of Aluminium Alloys. In
Proc. Advanced Computational Engineering an eXperimenting (ACE-X), Algarve, Portugal, p.79.
Da Silva, LFM,
Critchlow, GW, Figueiredo, MV (2007) Parametric Study of Adhesively Bonded Single Lap Joints by the Taguchi Method. In
Proc. Advanced Computational Engineering and eXperimenting (ACE-X), Algarve, Portugal, p.115.
Critchlow, GW, Yendall, KA, Dahm, RH (2007)
State-of-the-Art Hexavalent Chromium-Free Surface Pretreatments for Alumium Alloys. In
Proc. Swissbonding '07, Raperswill, Switzerland, pp.223-32.
Critchlow, GW and Yendall, KA (2006) The Development of Novel Anodising Processes for the Replacement of chromium VI Surface Pretreatments. In
Proc. World congress on Adhesion and Related Phenomena (WCARP) III, Beijing, China, p.48.
Ana, U, Jumbo, F, Spence, M,
Critchlow, GW (2006)
The Attainment of Controlled Adhesion by Incorporation of Low Level Additives in a PDMS-Based Adhesive. In
Proc. World Congress on Adhesion and Related Phenomena (WCARP) III, Beijing, China, p.278.
Yendall, KA,
Critchlow, GW, Wilcox, GD, Cantwell, PA (2006) Developing Hexavalent Chromium Free Surface Pretreatments for Aluminium Alloys. In
Proc. Sustainable use of Materials, St. Catherine's College, Oxford, p.15.
Wilcox, GD, Cantwell, PA,
Critchlow, GW, Yendall, KA (2006) Strategies for Replacing Electrodeposited Cadmium Coatings. In
Proc. Sustainable Use of Materials, St. Catherine's College, Oxford, p.14.
Webb, PW and
Critchlow, GW (2005) A Study of the Interphasial Polymer in Epoxide-Metal Structures. In
Int. Conf. on the Science and Technology of Adhesion and Adhesives, Proc. Adhesion '05, Oxford, pp.258-262.
Critchlow, GW, Yendall, KA, Franco, H, Cartwright, T (2005) A strategy for the Replacement of Chromic Acid Anodising in Structural Bonding of Aluminium Alloys. In
Int. Conf. on the Science and Technology of Adhesion and Adhesives, Proc. Adhesions '05, Oxford, pp.29-32.
Webb, PW,
Critchlow, GW, Grandy, DB (2004) The Influence of Contamination on the Performance of Tensile Butt Joints. In
Proc. 27th Meeting of the Adhesion Society, Wilmington, N.Carolina, USA, p.186.
Litchfield, RE and
Critchlow, GW (2004) Surface Cleaning Methods for Improved Coating Adhesion. In
Proc. 27th Meeting of the Adhesion Society, Wilmington, N.Carolina, USA, p.185.
Cartwright, T and
Critchlow, GW (2004) A Two-Stage Anodisation Process for the Production of Bonded Aluminium Structures. In
Proc. 27th Meeting of the Adhesion Society, Wilmington, N.Carolina, USA, p.322.
Brewis, DM and
Critchlow, GW (1999) The Use of Surface Analytical Techniques to Understand Adhesion Performance. In
Proceedings of SURCON 99, Birmingham, pp.1-27.
Critchlow, GW, Webb, PW, Tremlett, CJ, Brown, K (1999) Conversion Coatings for Bonding Plain Carbon Steels. In
Proc. Adhesion '99 7th Int. Conf. on the Science and Technology of Adhesion and Adhesives, Cambridge, pp.1-27.
Critchlow, G and Webb, PW (1999) Novel Chemical Conversion Coatings for the Bonding of Medium Carbon Steel. In
Proc. 37th Conference on Adhesion and Adhesives, Oxford, p.14.
Webb, PW,
Critchlow, G, Brown, K (1999) Pretreatments for Bonding Plain Carbon Steel. In
Proc. 22nd Meeting of the Adhesion Society, Florida, pp.182-184.
Critchlow, GW, Swallowe, GM, Wimpory, RC (1999) Longitudinal Stresses in Lap Joints Measured Using Neutron Strain Scanning. In Speth, DRE (ed)
Proceedings of the 22nd Annual Meeting of the Adhesion Society, Florida, pp.348-350.
Critchlow, G (1998) Metal Hydration: Its Influence on the Long-term Durability of Aluminium Alloy Joints. In
Proc. Euradh'98/WCARP1, Garmisch-Partenkirchen, Germany, pp.23-25.
Critchlow, G and Bedwell, K (1998) Conversion Coatings for the Bonding of Hot Dipped Galvanised Mild Steel. In
Proc. 5th Int. Conf. on Adhesion and Surface Analysis, Loughborough, pp.83-88.
Critchlow, GW, Hampshire, J, Kingdon, R, Naeem, Z, Smith, AB, Teer, DG (1997)
Adhesion of wear resistant hard coatings to steel substrates. In
Meeting on Scratch Testing, TRIBOLOGY INTERNATIONAL, LONDON, ENGLAND, pp.499-506, DOI:
10.1016/S0301-679X(97)00013-3.
Critchlow, GW, Brewis, DM, Brown, K, Bines, EB (1997) Conversion Coatings to Enhance the Durability of Bonded Aluminium. In
Proceedings of Swiss Bonding 97, Raperswill, Switzerland.
Critchlow, G (1997) Conversion Coatings for the Adhesive Bonding of Aluminium. In
Proc. IoM Meeting on Surface Preparation for Adhesive Bonding, London, pp.25-30.
Critchlow, G and Brewis, DM (1997) Conversion Coatings for the Adhesive Bonding of Aluminium. In
Proc. IoP Congress, Leeds, p.93.
Critchlow, GW (1997) Aluminium Pretreatment 2 - To Enhance the Durability of Bonded Aluminium Joints. In
Critchlow, GW (ed)
Proceedings of Seminar on Replacement of Hexavalent Chromium in Surface Treatments, Risley, Derbyshire, UK, p.60, ISBN: 0 9517129 3 4.
Critchlow, GW (1997) Chromate-Phosphate and Chromate-Free Conversion coatings for the Adhesive Bonding of Aluminium. In
Proceedings of 20th Anniversary Meeting of the Adhesion Society, South Carolina, pp.343-345.
Wilcox, GD and
Critchlow, G (1997) Environmental Issues in the Surface Treatment of Metals. In
Proc. IMF/NASURF Conference, East Kilbride, pp.1-9.
Jones, AC, Houlton, DJ, Rushworth, SA,
Critchlow, G (1995) A New Route to the Deposition of A1203 by MOCVD. In
Proc. EuroCVD, Venice, pp.25-31.
Critchlow, GW and Brewis, DM (1995) Aspects of Metal-to-Metal Adhesion. In
Proceedings of SAE IV, Bristol, pp.293-303.
JONES, AC, HOULTON, DJ, RUSHWORTH, SA,
CRITCHLOW, GW (1995)
A NEW ROUTE TO THE DEPOSITION OF AL2O3 BY MOCVD. In
10th European Conference on Chemical Vapour Deposition (EUROCVD 10), JOURNAL DE PHYSIQUE IV, JESOLO LIDO, ITALY, pp.557-560, DOI:
10.1051/jphyscol:1995566.
Brewis, DM,
Critchlow, GW, Maddison, A (1995) Durability of Bonded Metal Joints. In
Swiss Bonding 95, Proceedings of International Symposium, Zurich, pp.105-113.
Smith, AB, Kempster, A, Smith, J,
Critchlow, GW (1995) The Formation of Aluminide Coatings on Inconel 738 by Conventional Chemical Vapour Deposition: An Initial Study. In Sudarshan, TS and Jeandin, ME (ed)
Proceedings of Eighth International Conference on Surface Modification Technologies, Nice, France, pp.875-886, ISBN: 0 901716 69 3.
Brewis, DM,
Critchlow, GW, Maddison, A (1995) Durability of Bonded Metal Joints. In
Proceedings 9th International Symposium Swissbonding, Rapperswil, Switzerland, pp.106-112.
Maddison, A and
Critchlow, GW (1993) The Effect of Pretreatment on the High Strain Rate Behaviour of Adhesively Bonded Aluminium Alloy. In
Proceedings of International Symposium on the Interphase, Williamsburg, Virginia, pp.73-76.
Smith, AB, Mathiesen, B, Koh, J,
Critchlow, GW, Kempster, A, Smith, J (1993) Characteristics of Chromium Carbide Coatings Produced on a Martensitic Stainless Steel by Different Deposition Processes. In Bildstein, H and Eck, RE (ed)
Proceedings of 13th International Plansee Seminar, Reutte, Tirol, Austria, pp.129-144.
HOWSON, RP, HALL, GW,
CRITCHLOW, GW, SYKES, DE (1992)
DIRECT-CURRENT REACTIVE SPUTTERING OF TRANSPARENT CONDUCTING OXIDES OF ZINC DOPED WITH INDIUM. In
CONF OF THE VACUUM GROUP OF THE INST OF PHYSICS ( VACUUM 91 ), VACUUM, UNIV SALFORD, SALFORD, ENGLAND, pp.167-169, DOI:
10.1016/0042-207X(92)90206-C.
CRITCHLOW, GW and MADDISON, A (1991)
DURABILITY OF ADHESIVE JOINTS UNDER IMPACT CONDITIONS. In
INTERNATIONAL CONF ON ADHESION AND SURFACE ANALYSIS, SURFACE AND INTERFACE ANALYSIS, LOUGHBOROUGH UNIV, LOUGHBOROUGH, ENGLAND, pp.539-541, DOI:
10.1002/sia.740170726.
