Journal Articles
Kornienko, V, Oklobia, O, Irvine, S, Jones, S, Munshi, A, Sampath, W, Abbas, A, Curson, K, Robertson, S,
Tse, Y, Barth, K, Bowers, J, Walls, M (2024)
Absorber texture and the efficiency of polycrystalline thin film CdTe solar cells,
Thin Solid Films, 793, 140277, ISSN: 0040-6090. DOI:
10.1016/j.tsf.2024.140277.
Simonelli, M, Zou, Z, Barriobero-Vila, P,
Tse, YY (2023)
The development of ultrafine grain structure in an additively manufactured titanium alloy via high-temperature microscopy,
Materialia, 30, pp.101856-101856, DOI:
10.1016/j.mtla.2023.101856.
Chen, M, Simonelli, M, Van Petegem, S,
Tse, YY, Chang, CST, Makowska, MG, Sanchez, DF, Swygenhoven, HM-V (2022)
A quantitative study of thermal cycling along the build direction of Ti-6Al-4V produced by laser powder bed fusion,
Materials and Design, 225, 111458, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2022.111458.
Chen, M, Van Petegem, S, Zou, Z, Simonelli, M,
Tse, Y, Chang, CST, Makowska, MG, Sanchez, DF, Swygenhoven, HM-V (2022)
Microstructural engineering of a dual-phase Ti-Al-V-Fe alloy via in situ alloying during laser powder bed fusion,
Additive Manufacturing, 59, 103173, ISSN: 2214-8604. DOI:
10.1016/j.addma.2022.103173.
Barman, A, Chatterjee, S, Ou, C,
Tse, Y, Banerjee, N, Kar-Narayan, S, Datta, A, Mukherjee, D (2021)
Large electrocaloric effect in lead-free ferroelectric Ba0.85Ca0.15Ti0.9Zr0.1O3 thin film heterostructure,
APL Materials, 9, 021115, ISSN: 2166-532X. DOI:
10.1063/5.0039143.
Ma, S, Tang, Q, Han, X, Feng, Q, Song, J, Setchi, R, Liu, Y, Liu, Y, Goulas, A, Engstrom, D,
Tse, Y, Zhen, N (2020)
Manufacturability, mechanical properties, mass-transport properties and biocompatibility of triply periodic minimal surface (TPMS) porous scaffolds fabricated by selective laser melting,
Materials & Design, 195, 109034, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2020.109034.
Shi, Q,
Tse, Y, Higginson, R (2020)
Microstructure evolution and microhardness analysis of metastable beta titanium alloy Ti-15V-3Cr-3Al-3Sn consolidated using equal-channel angular pressing from machining chips,
Journal of Materials Engineering and Performance, 29(6), pp.4142-4153, ISSN: 1059-9495. DOI:
10.1007/s11665-020-04913-8.
Simonelli, M, McCartney, DG, Barriobero-Vila, P, Aboulkhair, NT,
Tse, Y, Clare, A, Hague, R (2020)
The influence of iron in minimizing the microstructural anisotropy of Ti-6Al-4V produced by laser powder-bed fusion,
Metallurgical and Materials Transactions A, 51, pp.2444-2459, ISSN: 1073-5623. DOI:
10.1007/s11661-020-05692-6.
Shi, Q,
Tse, YY, Higginson, R, Chen, F, Tao, Q (2018)
Effect of Annealing Treatment on Microstructure and Micro-hardness of Equal Channel Angular Pressing Recycled Ti-6Al-4V,
Cailiao Daobao/Materials Review, 32(5), ISSN: 1005-023X. DOI:
10.11896/j.issn.1005-023X.2018.10.001.
Wang, A, Jones, IP, Landini, G, Mei, J,
Tse, YY, Li, YX, Ke, L, Huang, Y, Liu, L, Wang, C, Sammons, RL (2018)
Backscattered electron imaging and electron backscattered diffraction in the study of bacterial attachment to titanium alloy structure,
Journal of Microscopy, 270(1), pp.53-63, ISSN: 0022-2720. DOI:
10.1111/jmi.12649.
Shi, QA,
Tse, Y, Higginson, R (2018)
Microstructure and texture development during solid consolidation recycling of Ti-6Al-4V,
Materials Characterization, 147, pp.223-232, ISSN: 1044-5803. DOI:
10.1016/j.matchar.2018.10.020.
Shi, Q,
Tse, YY, Muhammad, R, Roy, A, Silberschmidt, VV, Higginson, RL (2016)
Effect of Machining on Shear-Zone Microstructure in Ti-15V-3Cr-3Al-3Sn: Conventional and Ultrasonically Assisted Turning,
Journal of Materials Engineering and Performance, pp.1-8, ISSN: 1544-1024. DOI:
10.1007/s11665-016-2209-y.
Shi, A,
Tse, Y, Higginson, R (2015)
Effects of processing parameters on relative density, microhardness and microstructure of recycled Ti-6Al-4V from machining chips produced by equal channel angular pressing,
Materials Science and Engineering A, 651, pp.248-258, ISSN: 0921-5093. DOI:
10.1016/j.msea.2015.11.002.
Simonelli, M,
Tse, Y, Tuck, C (2014)
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V,
Materials Science and Engineering: A, 616, pp.1-11, ISSN: 0921-5093. DOI:
10.1016/j.msea.2014.07.086.
Simonelli, M,
Tse, YY, Tuck, C (2014)
On the Texture Formation of Selective Laser Melted Ti-6Al-4V,
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, pp.1-10, ISSN: 1073-5623. DOI:
10.1007/s11661-014-2218-0.
Simonelli, M,
Tse, Y, Tuck, C (2014)
The formation of [alpha] + [beta] microstructure in as-fabricated selective laser melting of Ti–6Al–4V,
JOURNAL OF MATERIALS RESEARCH, 29(17), pp.2028-2035, ISSN: 0884-2914. DOI:
10.1557/jmr.2014.166.
Tse, YY, McMitchell, SRC, Jackson, TJ, Jones, IP, Genc, A (2012)
Line defects, planar defects and voids in SrTiO 3 films grown on MgO by pulsed laser and pulsed laser interval deposition,
Thin Solid Films, 520(9), pp.3440-3447, ISSN: 0040-6090. DOI:
10.1016/j.tsf.2011.12.033.
Simonelli, M,
Tse, YY, Tuck, C (2012)
Microstructure and mechanical properties of Ti-6A1-4V fabricated by selective laser melting,
TMS Annual Meeting, 1, pp.863-870, DOI:
10.1002/9781118356074.ch108.
Xu, X,
Tse, YY, West, GD, Huang, A (2012) Three-dimensional investigation of the microtexture near tensile crack tip in Ti-6Al-4V,
TMS Annual Meeting, 1, pp.911-917.
Simonelli, M,
Tse, YY, Tuck, C (2012)
Microstructure of Ti-6Al-4V produced by selective laser melting,
Journal of Physics: Conference Series, 371, ISSN: 1742-6588. DOI:
10.1088/1742-6596/371/1/012084.
Wang, A, Mei, J,
Tse, YY, Jones, IP, Sammons, RL (2012)
Hydroxyapatite synthesis on solid surfaces using a biological approach,
Journal of Physics: Conference Series, 398(1), ISSN: 1742-6588. DOI:
10.1088/1742-6596/398/1/012005.
Simonelli, M,
Tse, YY, Tuck, C (2012) Further undestanding of ti-6al-4v selective laser melting using texture analysis,
23rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2012, pp.480-491.
Tse, YY, McMitchell, SRC, Jackson, TJ, Jones, IP, Genc, A (2012) Line defects, planar defects and voids in SrTiO 3 films grown on MgO by pulsed laser and pulsed laser interval deposition,
Thin Solid Films, ISSN: 0040-6090.
Ng, CKY, Grimer, REJ,
Tse, YY (2011)
Determination of Ultra Light Weight Masses Using AFM and FIB Technology,
HKIE Transactions Hong Kong Institution of Engineers, 18(3), pp.22-26, ISSN: 1023-697X. DOI:
10.1080/1023697X.2011.10668234.
Duggan, BJ,
Tse, YY, Lam, G, Quadir, MZ (2011)
Deformation and recrystallization of interstitial free (IF) steel,
Materials and Manufacturing Processes, 26(1), pp.51-57, ISSN: 1042-6914. DOI:
10.1080/10426910903202237.
Mikheenko, P, Dang, VS,
Tse, YY, Awang Kechik, MM, Paturi, P, Huhtinen, H, Wang, Y, Sarkar, A, Abell, JS, Crisan, A (2010)
Integrated nanotechnology of pinning centers in YBa2Cu 3Ox films,
Superconductor Science and Technology, 23(12), ISSN: 0953-2048. DOI:
10.1088/0953-2048/23/12/125007.
Huhtinen, H, Irjala, M, Paturi, P, Grivel, JC,
Tse, YY, Falter, M, Eickemeyer, J, Zhao, Y (2010)
Growth and BZO-doping of the nanostructured YBCO thin films on buffered metal substrates,
Physica C: Superconductivity and its Applications, 470(SUPPL.1), ISSN: 0921-4534. DOI:
10.1016/j.physc.2010.02.088.
Duggan, BJ,
Tse, YY, Liu, GL (2010)
Deformation banding and origins of rolling and annealing textures in low carbon and interstitial free steels,
Materials Science and Technology, 26(4), pp.404-409, ISSN: 0267-0836. DOI:
10.1179/026708309X12535382371771.
Duggan, BJ,
Tse, YY, Lam, G, Quadir, MZ (2010) Deformation and Recrystallisation of IF Steel,
Materials and Maufacturing Processes, 25.
Tse, YY, McMitchell, SRC, Jackson, TJ, Jones, IP, Genc, A (2010)
Microstructural investigation of strontium titanate films grown by interval pulsed laser deposition,
Journal of Physics: Conference Series, 241, ISSN: 1742-6588. DOI:
10.1088/1742-6596/241/1/012040.
Crisan, A, Dang, VS, Mikheenko, P,
Tse, YY, Sarkar, A, Bowen, J, Abell, JS (2010)
Pinning potential in thick PrBa2Cu3Ox/YBa2Cu3O7-δ quasi-multilayers,
Physica C: Superconductivity and its Applications, 470(1), pp.55-60, ISSN: 0921-4534. DOI:
10.1016/j.physc.2009.10.006.
Nageswaran, C, Carpentier, C,
Tse, YY (2009)
Microstructural quantification, modelling and array ultrasonics to improve the inspection of austenitic welds,
Insight: Non-Destructive Testing and Condition Monitoring, 51(12), pp.660-666, ISSN: 1354-2575. DOI:
10.1784/insi.2009.51.12.660.
Nageswaran, C, Carpenter, C,
Tse, YY (2009) Microstructural qualification modelling and array ultrasonics to improve the inspection of austenitic welds,
Insight - Journal of the British Institute of NDT, 51(12).
Suherman, PM,
Tse, YY, Jackson, TJ, Bouyanfif, H, El Marssi, M, Hriljac, JA, Jones, IP, Lancaster, MJ (2009) Comparison of Structural Microstructural and Electrical Analysis of Barium Strontium Titanate Thin Films,
Journal of Applied Physics, 105, p.061604.
Huhtinen, H, Valimaki, A, Irjala, M, Paturi, P,
Tse, YY, Laiho, R (2009) Effect of BaZrO₃ Dopants in (110)-Oriented YBa₂Cu₃O₆₊ₓ Thin Films,
IEEE Transaction on Applied Superconductivity, 19, p.3412.
McMitchell, SRC,
Tse, YY, Bouyanfif, H, Jackson, TJ, Jones, IP, Lancaster, MJ (2009) Two-dimensional growth of SrTi₀₃ thin films on (001) MgO substrates using pulsed laser deposition and reflection high energy electron diffraction,
Applied Physical Letters, 95, p.174102.
Deng, X, Joshi, M, Chakalova, R, Colclough, MS, Palai, R,
Tse, YY, Jones, IP, Huhtinen, H, Muirhead, CM (2008)
Search for spin-polarization effects in La0.7 Mn0.3 Ca3 O3 /Y Ba2 Cu3 O7-δ thin-film bilayers,
Physical Review B - Condensed Matter and Materials Physics, 77(14), ISSN: 1098-0121. DOI:
10.1103/PhysRevB.77.144528.
Tse, YY, McMitchell, S, Jackson, TJ, Liu, YH, Jones, IP (2008) Growth and micrsostructural studies of strontium titanate films gorwn by standard and interval pulsed laser deposition,
Ferroelectrics, 368, pp.49-59.
Tse, YY, Suherman, PM, Jackson, TJ, Jones, IP (2008) Effect of growth effects on microwave properties in epitaxial Ba_{0.5}Sr_{0.5}TiO₃ thin films on (001 MgO grown by pulsed laser deposition,
Philosophical Magazine, 88(16), p.2505.
Tse, YY, Chakalov, RI, Jones, IP, Muirhead, CM, Huhtinen, H, Palai, R (2008)
Microstructural studies of La10.7Ca0.3MnO3 (LCMO) films on different (110) substrates deposited by pulsed laser deposition,
Journal of Physics: Conference Series, 126, ISSN: 1742-6588. DOI:
10.1088/1742-6596/126/1/012051.
Peurla, M, Huhtinen, H, Shakhov, MA, Traito, K, Stepanov, YP, Safonchik, M, Paturi, P,
Tse, YY, Palai, R, Laiho, R (2007)
Effects of nanocrystalline target and columnar defects on flux pinning in pure and BaZr O3 -doped Y Ba2 Cu3 O6+x films in fields up to 30 T,
Physical Review B - Condensed Matter and Materials Physics, 75(18), ISSN: 1098-0121. DOI:
10.1103/PhysRevB.75.184524.
Peurla, M, Huhtinen, H,
Tse, YY, Rattila, J, Paturi, P (2007) Structural Properties of YBCO Thin Films Deposited from different Kinds of Targets,
IEEE T. Appl. Supercond, 17, p.3608.
Cheung, YL, Maher, EF, Abell, JS, Jones, IP,
Tse, YY (2007) Microstructural study of YBCO multilayer coated conductor cylinder,
Superconductor Science and Technology, 20, p.511.
Peurla, M, Paturi, P, Stepanov, YP, Huhtinen, H,
Tse, YY, Bódi, AC, Raittila, J, Laiho, R (2006)
Optimization of the BaZrO3 concentration in YBCO films prepared by pulsed laser deposition,
Superconductor Science and Technology, 19(8), pp.767-771, ISSN: 0953-2048. DOI:
10.1088/0953-2048/19/8/013.
Suherman, PM, Jackson, TJ,
Tse, YY, Lancaster, MJ (2006)
Temperature dependent dielectric properties of coplanar phase shifters fabricated from Ba0.5Sr0.5TiO3 thin films,
Ferroelectrics, 335, pp.69-78, ISSN: 0015-0193. DOI:
10.1080/00150190600689365.
Tse, YY and Duggan, BJ (2006)
Orientation imaging microscopy studies of recrystallization in interstitial-free steel,
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 37A(3A), pp.1055-1064, ISSN: 1073-5623. DOI:
10.1007/s11661-006-0078-y.
Traito, K, Peurla, M, Huhtinen, H, Stepanov Yu, P, Safonchik, M,
Tse, YY, Paturi, P, Laoho, R (2006) Magnetic field dependence of the critical current and the flux pinning mechanism in YBa₂Cu₃O₆₊ₓ films doped with BaZrO₃,
Physical Review B, 73, p.224522.
Tse, YY, Chakalov, RI, Joshi, MM, Jones, IP, Muirhead, CM, Palai, R (2006) Microstructural Characterisation of Cuprate / Manganate Films on (110) SrTiO₃ Deposited by Laser Ablation,
Journal of Physics, 26, p.115.
Suherman, PM, Jackson, TJ,
Tse, YY, Jones, IP, Chakalova, RI, Lancaster, MJ (2006) Microwave properties of Ba_{0.5}Sr_{0.5}TiO₃ thin film coplanar phase shifters,
Journal of Applied Physics, 99, p.104101.
Tse, YY, Jackson, TJ, Koutsonas, Y, Passerieux, G, Jones, IP (2006) Microstructure of Homoepitaxial SrTiO₃ Films Deposited by Laser Ablation,
Journal of Physics, 26, p.339.
Peurla, M, Paturi, P, Stepanov Yu, P, Huhtinen, H,
Tse, YY, Bodi, AC, Raittila, J, Laiho, R (2006) Optimization of BaZrO₃ concentration in YBCO films prepared by pulse laser deposition,
Superconducting Science and Technology, 19(8), pp.767-771.
Tse, YY, Koutsonas, Y, Jackson, TJ, Passerieux, G, Jones, IP (2006) Microstructure of Homoepitaxial Strontium Titanate Films Grown by Pulsed Laster Deposition,
Thin Solid Films, 515, p.1788.
Tse, YY and Duggan, BJ (2006) Development of recrystallisation texture in IF steel,
Metallurgical and Materials Transaction, 37A, p.1055.
Abadias, G,
Tse, YY, Guerin, P, Pelosin, V (2006) Interdependence between stress, preferred orinetation and surface morphology of nanocrystalline TiN thin films deposited by dual ion beam sputtering,
Journal of Applied Physics, 99, p.113519.
Suherman, PH, Jackson, TJ,
Tse, YY, Lancaster, MJ (2006) Temperature dependent properties of coplanar phase shifters made from Ba_{0.5}Sr_{0.5}TiO₃ thin films,
Journal of Integrated Ferroelectric, 335, p.69.
Tse, YY, Suherman, PM, Jackson, TJ, Jones, IP (2005)
Microwave phase shifters: Epitaxial growth by pulsed laser deposition of dielectric Ba0.5Sr0.5TiO3 thin films on MgO,
Materials Research Society Symposium Proceedings, 902, pp.227-232, ISSN: 0272-9172. DOI:
10.1557/proc-0902-t10-25.
