Journal Articles
Zhang, X, Robertson, S,
Hogg, S, Jepson, M (2024)
Evaluation of metallurgical risk factors in post-test, advanced 9% Cr creep strength enhanced ferritic (CSEF) steel,
Materials at High Temperatures, 41(1), pp.73-83, ISSN: 0960-3409. DOI:
10.1080/09603409.2024.2319992.
Hu, J, Green, G,
Hogg, S, Higginson, R, Cocks, ACF (2019)
Effect of microstructure evolution on the creep properties of a polycrystalline 316H austenitic stainless steel,
Materials Science and Engineering: A, 772, 138787, ISSN: 0921-5093. DOI:
10.1016/j.msea.2019.138787.
Liotti, E, Kirk, C, Todd, I, Knight, KS,
Hogg, S (2018)
Synchrotron X-ray and neutron investigation of the structure and thermal expansion of the monoclinic Al13Cr2 phase,
Journal of Alloys and Compounds, 781, pp.1198-1208, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2018.12.132.
Stephenson, O, Higginson, R,
Hogg, S, Knight, J, Spindler, S (2018)
Characterisation of long term aging in Esshete 1250 welds,
Journal of Materials Science Forum, ISSN: 1662-9752. DOI:
10.4028/www.scientific.net/MSF.941.589.
Faulkner, RG, Vujic, S, Di Martino, F,
Hogg, SC (2016)
Modelling of creep and fracture properties of nickel based alloys,
Materials Science and Technology, pp.1-8, ISSN: 0267-0836. DOI:
10.1080/02670836.2016.1164959.
Di Martino, SF, Faulkner, RG,
Hogg, SC (2016)
High-temperature microstructural evolution and quantification for alloys IN740 and IN740H: comparative study,
Materials Science and Technology, pp.1-10, ISSN: 0267-0836. DOI:
10.1080/02670836.2016.1159002.
Di Martino, SF, Faulkner, RG,
Hogg, SC (2015)
Characterisation of microstructure and creep predictions of alloy IN740 for ultrasupercritical power plants,
Materials Science and Technology, 31(1), pp.48-58, ISSN: 0267-0836. DOI:
10.1179/1743284714y.0000000567.
Lay, V, Higginson, R,
Hogg, S, Kirk, C, Davis, C (2015)
Analysis of deposits formed during biomass co-firing on 15Mo3 under different gas and temperature conditions,
MATERIALS AT HIGH TEMPERATURES, 32(1-2), pp.230-237, ISSN: 0960-3409. DOI:
10.1179/0960340914Z.00000000105.
Di Martino, SF, Faulkner, RG,
Hogg, SC (2015)
Characterisation of microstructure and creep predictions of alloy IN740 for ultrasupercritical power plants,
Energy Materials: Materials Science and Engineering for Energy Systems, 10(1), pp.48-58, ISSN: 1748-9237. DOI:
10.1179/1743284714Y.0000000567.
Lay, V, Kirk, C,
Hogg, S, Higginson, R, Davis, C (2015)
Characterisation, analysis and comparison of multiple biomass fuels used in co-firing trials, 2015(2AO.5.1), pp.464-474, ISSN: 2282-5819. DOI:
10.5071/23rdEUBCE2015-2AO.5.1.
Carrick, DM,
Hogg, SC, Wilcox, GD (2014) Investigation into the impact of lithium additions on the corrosion response of Al-Cu alloys for aerospace applications,
Corrosion Management, (122), pp.14-18, ISSN: 1355-5243.
Martino, FD, Faulkner, RG,
Hogg, S, Vujic, S, Tassa, O (2014)
Characterisation of microstructure and creep properties of alloy 617 for high-temperature applications,
Materials Science and Engineering A, 619, pp.77-86, ISSN: 0921-5093. DOI:
10.1016/j.msea.2014.09.046.
Carrick, DM,
Hogg, SC, Wilcox, GD (2014)
Influence of Li Additions on the Microstructure and Corrosion Response of 2XXX Series Aluminium Alloys,
Materials Science Forum, 794-796, pp.193-198, DOI:
10.4028/www.scientific.net/msf.794-796.193.
Vujic, S, Di Martino, F, Matera, S, Tassa, O,
Hogg, SC, Zurek, J, Beal, C, Sommitsch, C (2014)
Microstructure evolution and Precipitation modelling in Ni-based alloy C-263,
Materials Science Forum, 783-786, pp.2219-2224, DOI:
10.4028/www.scientific.net/MSF.783-786.2219.
Green, G, Higginson, R,
Hogg, SC, Spindler, S, Hamm, C, Najorka, J (2014)
Analysis of ferrite formed in 321 grade austenitic stainless steel,
Materials Science and Technology, 31(4), pp.418-425, DOI:
10.1179/1743284714Y.0000000564.
Green, G, Higginson, R,
Hogg, SC, Spindler, S, Hamm, C (2014)
Evolution of sigma phase in 321 grade austenitic stainless steel parent and weld metal with duplex microstructure,
Materials Science and Technology, 30(12), pp.1392-1398, DOI:
10.1179/1743284713Y.0000000452.
Norman, RL, Dann, SE,
Hogg, SC, Kirk, CA (2013)
Synthesis and structural characterisation of new ettringite and thaumasite type phases: Ca₆[Ga(OH)₆·12H₂O]₂(SO₄)₃·2H₂O and Ca₆[M(OH)₆·12H₂O]₂(SO₄)₂(CO₃)₂, M = Mn, Sn,
Solid State Sciences, 25, pp.110-117, ISSN: 1293-2558. DOI:
10.1016/j.solidstatesciences.2013.08.006.
Carrick, DM,
Hogg, SC, Wilcox, GD (2013)
Corrosion of an advanced Al-Cu-Li alloy for aerospace applications,
Materials Science Forum, 765, pp.629-633, ISSN: 0255-5476. DOI:
10.4028/www.scientific.net/MSF.765.629.
Banjongprasert, C,
Hogg, SC, Liotti, E, Kirk, CA, Thompson, SP, Mi, J, Grant, PS (2010)
Spray Forming of Bulk Ultrafine-Grained Al-Fe-Cr-Ti,
Metallurgical and Materials Transactions, 41A, p.3208, DOI:
10.1007/s11661-010-0386-0.
Agyakwa, PA, Corfield, MR, Li, JF, Loh, WS, Liotti, E,
Hogg, SC, Johnson, CM (2010) Unusual Observations in the Wear-Outs of High-Purity Aluminium Wire Bonds Under Extended Range Passive Thermal Cycling,
IEEE Transactions on Device and Materials Reliability, 10(2), p.254.
Schofield, PF, Smith, AD, Mosselmans, JFW, Ohldag, H, Scholl, A, Raoux, S, Cressey, G, Cressey, BA, Quinn, PD, Kirk, CA,
Hogg, SC (2010) X-Ray Spectromicroscopy of Mineral Intergrowths in the Santa Catharina Meteorite,
Geostandards and Geoanalytical Research, 34(2), pp.145-159.
Hogg, SC, Mi, J, Nilsen, KE, Liotti, E, Grant, PS (2010)
Microstructure and Property Development in Spray Formed and Extruded Al-Mg-Li-Zr Alloys for Aerospace Applications,
Mat. -wiss. u. Werkstofftech, 41(7), p.562, DOI:
10.1002/mawe.201000643.
Loh, WS, Agyakwa, PA,
Hogg, SC, Ikujeniya, RJ, Corfield, MR, Johnson, CM (2008) Effect of bonding temperature, post-bond annealing and extended range thermal cycling on the reliability of al wire bonds,
International Conference and Exhibition on High Temperature Electronics 2008, HiTEC 2008, pp.40-47.
Moore, KL, Sykes, JM,
Hogg, SC, Grant, PS (2008) Pitting Corrosion of Spray Formed Al-Li-Mg Alloys,
Corrosion Science, 50, pp.3221-3226.
Hogg, SC, Palmer, IG, Thomas, LG, Grant, PS (2007)
Processing, Microstructure and Property Aspects of a Spraycast Al-Mg-Li-Zr Alloy,
Acta Materialia, 55(6), pp.1885-1894, ISSN: 1359-6454. DOI:
10.1016/j.actamat.2006.10.057.
Banjongprasert, C,
Hogg, SC, Palmer, IG, Grennan Heaven, N, Stone, IC, Grant, PS (2007) Spray Forming of Al-Fe-Cr-Ti and Al-Si-Li Alloys,
Materials Science Forum, 561-565, pp.1075-1078.
Venning, L,
Hogg, SC, Sinclair, I, Reed, PAS (2006)
Fatigue Crack Growth and Closure in Fine-Grained Aluminium Alloys,
Materials Science and Engineering: A, 428(1-2), pp.247-255, ISSN: 0921-5093. DOI:
10.1016/j.msea.2006.05.020.
Hogg, SC, Lambourne, A, Ogilvy, A, Grant, PS (2006)
Microstructural Characterisation of Spray Formed Si-30Al for Thermal Management Applications,
Scripta Materialia, 55(1), pp.111-114, ISSN: 1359-6462. DOI:
10.1016/j.scriptamat.2006.02.051.
Hogg, SC, Palmer, IG, Grant, PS (2006) An Investigation of Novel Spraycast Al-Mg-Li-Zr-(Sc) Alloys,
Materials Science Forum, 519-521, pp.1629-1634.
Hogg, SC and Atkinson, HV (2005)
Inhibited Coarsening of a Spray-Formed and Extruded Hypereutectic Aluminium-Silicon Alloy in the Semisolid State,
Metallurgical and Materials Transactions A, 36(1), pp.149-159, ISSN: 1073-5623. DOI:
10.1007/s11661-005-0147-7.
Hogg, SC, Atkinson, HV, Kapranos, P (2004) Semi-Solid Rapid Compression Testing of Spray-Formed Hypereutectic Al-Si Alloys,
Metallurgical and Materials Transactions A, 35A, pp.899-910.
Liu, TY, Atkinson, HV, Kapranos, P, Kirkwood, DH,
Hogg, SC (2003) Rapid Compression of Aluminium Aloys and its Relationship to Thixoformability,
Metallurgical and Materials Transactions A, 34A, pp.1545-1554.
Hogg, SC, Hetherington, CJD, Atkinson, HV (2000) Aluminium Precipitates in the Primary Silcon of As-Spray-Formed Hypereutectic Aluminium-Silicon Alloys,
Philosophical Magazine Letters, 80(7), pp.477-482, ISSN: 1362-3036.
Conferences
Hogg, S (Accepted for publication) Developing Excellent in Independent Learning. In Centre for Academic Practice Third Conference on Learning and Teaching, Loughborough University.
Higginson, R, Green, G,
Hogg, S, Spindler, S, Hamm, C (2015)
The microstructural development of type 321 Austenitic Stainless Steel with long term ageing. In
8th Stainless Steel and Duplex Steel Conference and Exhibition, Graz, Austria, pp.581-590.
Jackson, C, Higginson, R,
Hogg, S, Spindler, S, Hamm, C, Spindler, M, Abbott, K (2015)
The effect of long term ageing on the autogenous welding of dissimilar austenitic stainless steels. In
8th European Stainless Steel and Duplex Stainless Steel Conference and Exhibition, Graz, Austria, pp.77-86.
Jackson, C, Higginson, R,
Hogg, S, Spindler, S, Hamm, C, Spindler, M, Abbott, K (2015) The effect of long term ageing on the autogenous welding of dissimilar austenitic stainless steels. In
, 8th European Stainless Steel and Duplex Stainless Steel Conference 2015, pp.45-54.
Higginson, R, Green, G,
Hogg, S, Spindler, S, Hamm, C (2015) The microstructural development of type 321 austenitic stainless steel with long term ageing. In
, 8th European Stainless Steel and Duplex Stainless Steel Conference 2015, pp.549-558.
Liotti, E,
Hogg, SC, Kirk, CA, Quinn, P, Grant, PS (2011)
Micro-EXAFS and Micro-XRD Study of Selected Regions of a Al-Fe-Cr-Ti Complex Alloy. In e132, (ed)
Diamond Light Source Proc, Oxford, pp.1-3, DOI:
10.1017/S2044820110000870.
Hogg, SC, Liotti, E, Kirk, CA, Thompson, SP, Parker, JE, Grant, PS (2011)
High-Resolution Synchotron X-Ray Diffraction Studies of Size and Strain Effects in a Complex Al-Fe-Cr-Ti Alloy. In e133, (ed)
Diamond Light Source Proc, Oxford, pp.1-4, DOI:
10.1017/S2044820110000882.
Banjongprasert, C,
Hogg, SC, Liotti, E, Smith, GWD, Mi, J, Grant, PS (2009) Spray Forming of Bulk Nanostructured Al-Fe-Cr-Ti. In
Proc. Int. Conf. on Sprayforming, Bremen, Germany, p.16.
Hogg, SC, Mi, J, Liotti, E, Grant, PS (2009) Microstructure-Property in SF and Extruded Al-Mg-Li-Zr. In
Proc. Int. Conf. on Sprayforming, Bremen, Germany, p.533.
Agyakwa, PA, Loh, WS, Corfield, MR, Liotti, E,
Hogg, SC, Johnson, CM (2008) Anomalous Reliability Behaviour of 99.99% and 99.999% Pure Aluminium Wire Bonds Under Thermal Cycling. In
The 41st International Symposium on Microelectronics, Proc. IMAPS 2008, Rhode Island, USA, pp.658-665.
Liotti, E,
Hogg, SC, Banjongprasert, C, Palmer, IG, Grant, PS (2008) An Investigation of a Al-Fe-Cr-Ti Alloy Produced in Bulk Form by Spraycasting. In Hirsch, J, Skrozki, B, Gottstein, eds, G (ed)
Proc. ICAA11, Aachen, Germany, p.2355.
Hogg, SC, Banjongprasert, C, Palmer, IG, Grant, PS (2008) Processing-Structure-Property Relationship in a High Strength Spray Formed Al-Cu-Li-Mg-Ag-Zr Alloy. In Hirsch, J, Skrozki, B, Gorrsten, eds, G (ed)
Proc. ICAA11, Aachen, Germany, p.189.
Loh, WS,
Hogg, SC, Ikujeniya, RJ, Corfield, MR, Agyakwa, P, Johnson, CM (2008) Effect of Bonding Temperature, Post-Bond Heat Treatment and Extended Range Thermal Cycling on the Reliability of Al wire Bonds. In
International Conference on High Temperature Electronics (HiTEC 2008), Albuquerque, New Mexico, USA, pp.1-5.
Hogg, SC, Atkinson, HV, Kapranos, P (2007) Thixoforming of Stellite Powder Compacts. In
10th ESAFORM Conference on Materials Forming, AIP Conference Proc, Zaragoza, Spain, pp.1191-1198.
Banjongprasert, C,
Hogg, SC, Palmer, IG, Grant, PS (2007) Macrosegregation in Novel Spray Formed Al-Li Based Alloys. In
Proc. Conf. Solidification Processing 2007, Sheffield, pp.636-640.
Loh, WS, Corfield, M, Lu, H,
Hogg, SC, Tilford, T, Johnson, CM (2007) Wire Bond Reliability for Power Electronic Modules - Effect of Bonding Temperature. In
EuroSimE 2007, International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, London, pp.427-432.
Loh, WS, Corfield, M,
Hogg, SC, Johnson, CM (2006) Thermal Cycling Reliability of Heavy-Gauge Aluminium Wires Ultrasonically Bonded at Elevated Temperature. In
IMAPS 2006, 39th International Symposium on Microelectronics, San Diego, USA, pp.1-5.
Jirattiticharoean, W,
Hogg, SC, Kirk, CA, Jones, H (2004) Formation and Effects of Al₂Si₂Ce Type Phase in Hypereutectic Al-Si Alloy Castings Containing Additions of Phosphide Inoculant and Rare Earths. In
TMS Annual Meeting, Symposium on Solidification Processes and Microstructures in Honor of Wilfried Kurz, Charlotte, N. Carolina, USA, pp.269-274.
Jirattiticharoean, W,
Hogg, SC, Kirk, CA, Jones, H (2004) Formation and effects of Al₂Si₂Ce type phase in hypereutectic Al-Si alloy castings containing additions of phosphide inoculant and rare earths. In
Solidification Process. Microstruct. Symp, p.269.
Palmer, IG,
Hogg, SC, Grant, PS (2004) Development of Spraycast Al-Mg-Li Alloys. In Nie, F, J, Morton, J, A, Muddle, eds, BC (ed)
Proc. of the 9th International Conference on Aluminium Alloys (2004), Brisbane, Australia, pp.390-395.
Hogg, SC, Palmer, IG, Grant, PS (2004) Control of Microstructure in a Spraycast Al-Mg-Li-Zr Alloy. In Nie, F, J, Morton, J, A, Muddle, eds, BC (ed)
Proc. of the 9th International Conference on Aluminium Alloys (2004), Brisbane, Australia, pp.325-331.
Habesch, SM,
Hogg, SC, Atkinson, HV (2001) Heating Experiments on a Sprayformed Hypereutectic Al-Si Alloy using Environmental Scanning Electron Microscopy (SEM). In Strang, A and Cawley, JE (ed)
Microstructure of High Temperature Materials 5, Quantitative Microscopy of High Temperature Materials, Sheffield, pp.147-160.
