Journal Articles
Maydanshahi, MR, Saadatabadi, MN, Slatter, T, Pour, MM (2024)
The Anisotropic Mechanical and Tribological Behaviors of Additively Manufactured (Material Extrusion) Implant-Grade Polyether Ether Ketone (PEEK),
Lubricants, 12(10), 347, ISSN: 2075-4442. DOI:
10.3390/lubricants12100347.
Mohammad-Pour, M (2024) Whistle, whine and modal implications due to the electromechanical coupling of an electric powertrain,
Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering, ISSN: 0954-4070.
Cai, Y, Lu, J, Theodossiades, S, Zhu, X, Mohammad-Pour, M, Huang, X, Wu, B, Jiang, P (2024)
Analysis and optimization of time-varying meshing parameters of spiral bevel gear with consideration of load sensitivity,
Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering, ISSN: 0954-4070. DOI:
10.1177/09544070241278027.
Souza, MR, Haris, A, Rodrigues, L, Offner, G, Sopouch, M, Diwoky, F, Mohammad-Pour, M, Theodossiades, S (2024)
The use of an artificial neural network for assessing tone perception in electric powertrain noise, vibration and harshness,
Meccanica, 59(3), pp.433-459, ISSN: 0025-6455. DOI:
10.1007/s11012-024-01753-x.
Andreou, P, Hajjaj, A, Mohammad-Pour, M, Theodossiades, S (2023)
Analytical multiphysics methodology to predict vibroacoustics in PMSMs combining tangential electromagnetic excitation and tooth modulation effects,
IEEE Transactions on Transportation Electrification, ISSN: 2332-7782. DOI:
10.1109/TTE.2023.3325350.
Humphrey, E, Elisaus, V, Rahmani, R, Mohammadpour, M, Theodossiades, S, Morris, N (2023)
Diamond like-carbon coatings for electric vehicle transmission efficiency,
Tribology International, 189, 108916, ISSN: 0301-679X. DOI:
10.1016/j.triboint.2023.108916.
Andreou, P, Soleimanian, P, Mohammad-Pour, M, Bewsher, SR, Offner, G (2023)
Effects of diamond-like carbon and tungsten-carbide carbon coatings on tribological performance of cam–tappet conjunction,
Applied Sciences, 13(13), 7815, DOI:
10.3390/app13137815.
Eskandarzade, M, Masalehdan, T, Tutunchi, A, Osouli-Bostanabad, K, Hildyard, R, Bewsher, R, Mohammad-Pour, M (2023)
Study of tribological properties of bulk nanostructured aluminum and copper samples applicable in automotive bearing application,
Journal of Materials Engineering and Performance, 32(19), ISSN: 1059-9495. DOI:
10.1007/s11665-023-07835-3.
Questa, H, Mohammad-Pour, M, Theodossiades, S, Garner, C, Bewsher, SR, Offner, G (2023)
Tribodynamic modelling of high-speed rolling element bearings in flexible multi-body environments,
Machines, 11(1), 93, DOI:
10.3390/machines11010093.
Heaps, W, Questa, H, Mohammad-Pour, M, Bewsher, SR, Offner, G (2022)
Simulation of air foil bearings for use in turbo compressor applications,
International Journal of Powertrains, ISSN: 1742-4267.
Walker, J, Questa, H, Raman, A, Mohammad-Pour, M, Bewsher, SR, Offner, G (2022)
Application of tribological artificial neural networks in machine elements,
Tribology Letters, 71(1), 3, ISSN: 1023-8883. DOI:
10.1007/s11249-022-01673-5.
Hajjaj, A, Corrigan, K, Mohammadpour, M, Theodossiades, S (2022)
On the stability analysis of gear pairs with tooth profile modification,
Mechanism and Machine Theory, 174, 104888, ISSN: 0094-114X. DOI:
10.1016/j.mechmachtheory.2022.104888.
Walker, J, Tang, R, Mohammad-Pour, M (2022)
Effect of multi-speed transmission design on the drive cycle performance of a series-parallel hybrid electric vehicle,
International Journal of Powertrains, 11(1), pp.90-102, ISSN: 1742-4267. DOI:
10.1504/IJPT.2022.121977.
Song, X, Prucka, R, Spitas, C, Mohammad-Pour, M (2022)
Editors’ perspectives: synergistic technologies for dedicated hybrid powertrains,
International Journal of Powertrains, 10(4), pp.395-439, ISSN: 1742-4267. DOI:
10.1504/IJPT.2021.120960.
Walker, J, Mohammad-Pour, M, Theodossiades, S, Bewsher, R, Offner, G, Bansal, H, Leighton, M, Braunstingl, M, Flesch, H (2022)
A multi-physics transient wear model for helical gear pairs,
Tribology International, 169, 107463, ISSN: 0301-679X. DOI:
10.1016/j.triboint.2022.107463.
Jivan, R, Eskandarzade, M, Bewsher, S, Leighton, M, Mohammad-Pour, M, Saremi-Yarahmadi, S (2021)
Application of solid lubricant for enhanced frictional efficiency of deep drawing process,
Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 236(1), pp.624-634, ISSN: 0954-4062. DOI:
10.1177/0954406221994886.
Soleimanian, P, Mohammad-Pour, M, Ahmadian, H (2021)
Effect of lubricant starvation on the tribo-dynamic behavior of linear roller guideway,
Shock and Vibration, 2021, 7517696, ISSN: 1070-9622. DOI:
10.1155/2021/7517696.
Friskney, BT, Mohammad-Pour, M, Theodossiades, S, Craig, C, Rapson, G (2021)
Effects of transmission shaft flexibility on rolling element bearing tribodynamics in a high-performance transmission,
Mechanism and Machine Theory, 165, 104440, ISSN: 0094-114X. DOI:
10.1016/j.mechmachtheory.2021.104440.
Fatourehchi, E and Mohammad-Pour, M (2021)
A system level computational model for thermo-tribological functioning of high-performance racing transmission with dry sump lubrication,
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 236(4), pp.659-673, ISSN: 1350-6501. DOI:
10.1177/13506501211028412.
Walker, J, Umer, J, Mohammad-Pour, M, Theodossiades, S, Bewsher, SR, Offner, G, Bansal, H, Leighton, M, Braunstingl, M, Flesch, H-G (2021)
Asperity level characterization of abrasive wear using atomic force microscopy,
Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477(2250), 20210103, ISSN: 1364-5021. DOI:
10.1098/rspa.2021.0103.
Ghosh, P, Pacella, M, Cox, C, Mohammad-Pour, M, Roy, A (2021)
Unprecedented hardness of polycrystalline diamond via laser surface engineering,
Surface and Coatings Technology, 419, 127302, ISSN: 0257-8972. DOI:
10.1016/j.surfcoat.2021.127302.
Msalehdan, T, Eskandarzade, M, Tutunchi, A, Kim, B, Questa, H, Mohammad-Pour, M, Asl, MS (2021)
Two-dimensional clay nanosheet-reinforced polytetrafluoroethylene composites and their mechanical/tribological studies,
Materials Today Communications, 26, 102026, ISSN: 2352-4928. DOI:
10.1016/j.mtcomm.2021.102026.
Hildyard, R, Bewsher, R, Walker, J, Umer, J, Saremi-Yarahmadi, S, Pacella, M, Mohammad-Pour, M, Offner, G (2020)
Tribological enhancement of piston skirt conjunction using graphene-based coatings,
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 235(5), pp.1330-1350, ISSN: 0954-4070. DOI:
10.1177/0954407020966176.
Questa, H, Mohammad-Pour, M, Theodossiades, S, Garner, C, Bewsher, R, Offner, G (2020)
Tribo-dynamic analysis of high-speed roller bearings for electrified vehicle powertrains,
Tribology International, 154, 106675, ISSN: 0301-679X. DOI:
10.1016/j.triboint.2020.106675.
Umer, J, Saleem, F, Asim, M, Usman, M, Kamran, MS, Alam, K, Mohammad-Pour, M (2020)
Thermal activation Eyring energy approach to characterise the dependence of nanoscale friction on the surface roughness,
Tribology International, 151, 106532, ISSN: 0301-679X. DOI:
10.1016/j.triboint.2020.106532.
Laderou, A, Mohammad-Pour, M, Theodossiades, S, Daubney, R, Meeks, G (2020)
On the effect of DLC and WCC coatings on the efficiency of manual transmission gear pairs,
Applied Sciences, 10(9), 3102, DOI:
10.3390/app10093102.
Soleimanian, P, Mohammad-Pour, M, Ahmadian, H (2020)
Coupled tribo-dynamic modelling of linear guideways for high precision machining application,
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235(4), pp.711-737, ISSN: 1350-6501. DOI:
10.1177/1350650120919885.
Haris, A, Alevras, P, Mohammad-Pour, M, Theodossiades, S, Mahony, MO (2020)
Design and validation of a nonlinear vibration absorber to attenuate torsional oscillations of propulsion systems,
Nonlinear Dynamics, 100, pp.33-49, ISSN: 0924-090X. DOI:
10.1007/s11071-020-05502-z.
Hildyard, R, Mohammadpour, M, Saremi-Yarahmadi, S, Pacella, M (2019)
Multiscale numerical and experimental analysis of tribological performance of GO coating on steel substrates,
Materials, 13(1), 41, ISSN: 1996-1944. DOI:
10.3390/ma13010041.
Laderou, A, Mohammad-Pour, M, Theodossiades, S, Wilson, A, Daubney, R (2019)
Effect of bearing thermally induced preload on the efficiency of automotive manual transmission under RDE,
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(21-22), pp.7423-7441, ISSN: 0954-4062. DOI:
10.1177/0954406219877905.
Walker, J, Huerta, IM, Oglieve, C, Bewsher, R, Mohammad-Pour, M (2019)
Fuel consumption and emission reduction by using a CVT in series with conventional multi-speed transmission,
International Journal of Powertrains, ISSN: 1742-4267. DOI:
10.1504/IJPT.2019.099632.
Oglieve, C, Sivayogan, G, Mohammadpour, M, Rahnejat, H (2019)
Lubricated loaded tooth contact analysis for spur gear pair,
International Journal of Powertrains, ISSN: 1742-4267. DOI:
10.1504/IJPT.2019.098119.
Fatourehchi, E, Mohammadpour, M, King, P, Rahnejat, H, Trimmer, G, Womersley, B, Williams, A (2019)
Effect of tooth profile modification on the durability of planetary hub gears,
International Journal of Powertrains, 8(1), pp.40-57, ISSN: 1742-4267. DOI:
10.1504/IJPT.2019.098120.
Jones, G, Nadjibzadeh, N, Karoly, L, Mohammad-Pour, M (2019)
An integrated dialect analysis tool using phonetics and acoustics,
Lingua, 221, pp.37-48, ISSN: 0024-3841. DOI:
10.1016/j.lingua.2019.01.007.
Kalaki, A, Eskandarzade, M, Barghani, S, Mohammadpour, M (2018)
Experimental and numerical evaluation of influencing parameters on the manufacturing of lined pipes,
International Journal of Pressure Vessels and Piping, ISSN: 0308-0161. DOI:
10.1016/j.ijpvp.2018.11.014.
Bewsher, R, Leighton, M, Mohammadpour, M, Rahnejat, H, Offner, G, Knaus, O (2018)
Boundary friction characterisation of a used cylinder liner subject to fired engine conditions and surface deposition,
Tribology International, 131, pp.424-437, ISSN: 1879-2464. DOI:
10.1016/j.triboint.2018.11.005.
Fatourehchi, E, Shahmohamadi, H, Mohammadpour, M, Rahmani, R, Theodossiades, S, Rahnejat, H (2018)
Thermal analysis of an oil jet-dry sump transmission gear under mixed-elastohydrodynamic conditions,
Journal of Tribology, 140(5), ISSN: 0742-4787. DOI:
10.1115/1.4039567.
Samadpour, F, Faraji, G, Babaie, P, Bewsher, R, Mohammadpour, M (2018)
Hydrostatic cyclic expansion extrusion (HCEE) as a novel severe plastic deformation process for producing long nanostructured metals,
Materials Science and Engineering: A, ISSN: 0921-5093. DOI:
10.1016/j.msea.2018.01.116.
Morris, N, Mohammadpour, M, Rahmani, R, Johns-Rahnejat, PM, Rahnejat, H, Dowson, D (2018)
Effect of cylinder deactivation on tribological performance of piston compression ring and connecting rod bearing,
Tribology International, ISSN: 1879-2464. DOI:
10.1016/j.triboint.2017.12.045.
Fatourehchi, E, Mohammadpour, M, King, P, Rahnejat, H, Trimmer, G, Womersley, B, Williams, A (2018)
Microgeometrical tooth profile modification influencing efficiency of planetary hub gears,
International Journal of Powertrains, ISSN: 1742-4267. DOI:
10.1504/IJPT.2018.10011451.
Bewsher, R, Mohammadpour, M, Rahnejat, H, Offner, G, Knaus, O (2018)
An investigation into the oil transport and starvation of piston-ring pack,
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, ISSN: 2041-305X. DOI:
10.1177/1350650118768310.
Fatourehchi, E, Mohammadpour, M, Theodossiades, S, Rahnejat, H (2018)
Transient thermal analysis of mixed-elastohydrodynamic contact of high performance transmission in a dry sump environment,
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, ISSN: 2041-305X. DOI:
10.1177/1350650118775802.
Bewsher, R, Leighton, M, Mohammadpour, M, Rahnejat, H, Offner, G, Knaus, O (2018)
Atomic force microscopic measurement of a used cylinder liner for prediction of boundary friction,
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, ISSN: 0954-4070. DOI:
10.1177/0954407018792143.
Eskandarzade, M, Bewsher, R, Mohammadpour, M, Tutunchi, A, Osouli, K, Rahnejat, H (2018)
Friction reduction in bulk nanostructured material subjected to severe plastic deformation,
Journal of Materials Engineering and Performance, ISSN: 1059-9495.
Eftekhari, M, Faraji, G, Nikbakht, S, Rashed, R, Sharifzadeh, R, Hildyard, R, Mohammadpour, M (2017)
Processing and characterization of nanostructured Grade 2 Ti processed by combination of warm isothermal ECAP and extrusion,
Materials Science and Engineering: A, 703, pp.551-558, ISSN: 0921-5093. DOI:
10.1016/j.msea.2017.07.088.
Elisaus, V, Mohammadpour, M, Theodossiades, S, Rahnejat, H (2017)
Effect of teeth micro-geometrical form modification on contact kinematics and efficiency of high performance transmissions,
Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 231(3), pp.538-555, ISSN: 1464-4193. DOI:
10.1177/1464419317710157.
Morris, N, Mohammadpour, M, Rahmani, R, Rahnejat, H (2017)
Optimisation of piston compression ring for improved energy efficiency of high performance race engines,
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, ISSN: 2041-2991. DOI:
10.1177/0954407016686249.
Oglieve, C, Mohammadpour, M, Rahnejat, H (2017)
Optimisation of the vehicle transmission and the gear-shifting strategy for the minimum fuel consumption and the minimum nitrogen oxide emissions,
Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering, ISSN: 0954-4070. DOI:
10.1177/0954407017702985.
Mohammadpour, M, Theodossiades, S, Rahnejat, H, Dowson, D (2017)
Non-newtonian mixed thermo-elastohydrodynamics of hypoid gear pairs,
Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, ISSN: 1350-6501. DOI:
10.1177/1350650117700756.
Haris, A, Motato, E, Mohammadpour, M, Theodossiades, S, Rahnejat, H, O'Mahony, M, Vakakis, AF, Bergman, LA, McFarland, DM (2017)
On the effect of multiple parallel nonlinear absorbers in palliation of torsional response of automotive drivetrain,
International Journal of Non-Linear Mechanics, ISSN: 0020-7462.
Turnbull, R, Mohammadpour, M, Rahmani, R, Rahnejat, H, Offner, G (2017)
Coupled elastodynamics of piston compression ring subject to sweep excitation,
Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, ISSN: 2041-3068. DOI:
10.1177/1464419317725942.
Athanasopoulos, E, Salpistis, C, Mohammadpour, M, Mihailidis, A, Theodossiades, S, Grekoussis, R (2017)
Calculation of the kinematics of hypoid gears towards developing a method for an equivalent crossed helical gear pair selection for use in tribological experimental evaluations,
Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, ISSN: 1464-4193. DOI:
10.1177/1464419317725943.
Fatourehchi, E, Mohammadpour, M, King, P, Rahnejat, H, Trimmer, G, Williams, A, Womersley, B (2017)
Effect of mesh phasing on the transmission efficiency and dynamic performance of wheel hub planetary gear sets,
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, ISSN: 2041-2983. DOI:
10.1177/0954406217737327.
Bewsher, R, Turnbull, R, Mohammadpour, M, Rahmani, R, Rahnejat, H, Offner, G, Knaus, O (2016)
Effect of cylinder de-activation on the tribological performance of compression ring conjunction,
Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 231(8), pp.997-1006, ISSN: 1350-6501. DOI:
10.1177/1350650116684985.
Motato, E, Haris, A, Theodossiades, S, Mohammadpour, M, Rahnejat, H, Kelly, P, Vakakis, AF, McFarland, DM, Bergman, LA (2016)
Targeted energy transfer and modal energy redistribution in automotive drivetrains,
Nonlinear Dynamics, 87, pp.169-190, ISSN: 1573-269X. DOI:
10.1007/s11071-016-3034-4.
Mohammadpour, M, Theodossiades, S, Rahnejat, H (2016)
Dynamics and efficiency of planetary gear sets for hybrid powertrains,
Proceedings of the IMechE, Part C: Journal of Mechanical Engineering Science, ISSN: 0954-4062. DOI:
10.1177/0954406215590644.
Fatourehchi, E, Elisaus, V, Mohammadpour, M, Theodossiades, S, Rahnejat, H (2016)
Efficiency and durability predictions of high performance racing transmissions,
SAE International Journal of Passenger Cars - Mechanical Systems, 125(6), ISSN: 1946-3995. DOI:
10.4271/2016-01-1852.
Turnbull, R, Miknas, OR, Mohammadpour, M, Rahnejat, H (2016)
Combined experimental and flexible multibody dynamic investigation of high energy impact-induced driveline vibration,
Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multibody Dynamics, ISSN: 1464-4193. DOI:
10.1177/1464419316659996.
Eskandarzade, M, Masoumi, A, Faraji, G, Mohammadpour, M, Yan, S (2016)
A new designed incremental high pressure torsion process for producing long nanostructured rod samples,
Journal of Alloys and Compounds, ISSN: 0925-8388. DOI:
10.1016/j.jallcom.2016.10.296.
Mohammadpour, M, Morris, N, Leighton, M, Rahnejat, H (2015)
Effect of surface topography upon micro-impact dynamics,
Surface Topography: Metrology and Properties, 4(1), 014001, DOI:
10.1088/2051-672X/4/1/014001.
Shahmohamadi, H, Mohammadpour, M, Rahmani, R, Rahnejat, H, Garner, C, Howell-Smith, SJ (2015)
On the boundary conditions in multi-phase flow through the piston ring-cylinder liner conjunction,
Tribology International, 90, pp.164-174, ISSN: 1879-2464. DOI:
10.1016/j.triboint.2015.04.025.
Mohammadpour, M, Johns-Rahnejat, PM, Rahnejat, H (2015)
Roller bearing dynamics under transient thermal-mixed non-Newtonian elastohydrodynamic regime of lubrication,
Part K: Journal of Multi-body Dynamics, ISSN: 1464-4193. DOI:
10.1177/1464419315569621.
Mohammadpour, M, Johns-Rahnejat, PM, Theodossiades, S, Rahnejat, H (2015)
Effect of tapered roller bearing supports on the dynamic behaviour of hypoid gear pair differentials,
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, ISSN: 2041-2991. DOI:
10.1177/0954407015598677.
Mohammadpour, M, Theodossiades, S, Rahnejat, H, Saunders, T (2014)
Non-Newtonian mixed elastohydrodynamics of differential hypoid gears at high loads,
Meccanica, 49(5), pp.1115-1138, ISSN: 0025-6455. DOI:
10.1007/s11012-013-9857-x.
Mohammadpour, M, Rahmani, R, Rahnejat, H (2014)
Effect of cylinder deactivation on the tribo-dynamics and acoustic emission of overlay big end bearings, ISSN: 1464-4193. DOI:
10.1177/1464419313519085.
Mohammadpour, M, Theodossiades, S, Rahnejat, H (2014)
Multi-physics investigations on the dynamics of differential hypoid gears.
Mohammadpour, M, Theodossiades, S, Rahnejat, H (2014)
Transmission efficiency and noise, vibration and harshness refinement of differential hypoid gear pairs, DOI:
10.1177/1464419313496559.
Shahmohamadi, H and Mohammadpour, M (2014)
A series solution for three-dimensional Navier-Stokes equations of flow near an infinite rotating disk,
World Journal of Mechanics, 4(5), pp.117-127, ISSN: 2160-049X. DOI:
10.4236/wjm.2014.45014.
Mohammadpour, M, Theodossiades, S, Rahnejat, H (2014)
Transient mixed non-Newtonian thermo-elastohydrodynamics of vehicle differential hypoid gears with starved partial counter-flow inlet boundary,
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 0(0), pp.1-15, ISSN: 1350-6501. DOI:
10.1177/1350650114537805.
Mohammadpour, M, Johns-Rahnejat, PM, Rahnejat, H, Gohar, R (2013)
Boundary conditions for elastohydrodynamics of circular point contacts,
Tribology Letters, 53, pp.107-118, ISSN: 1023-8883. DOI:
10.1007/s11249-013-0249-0.
Mohammadpour, M, Theodossiades, S, Rahnejat, H, Saunders, T (2013)
Non-newtonian mixed elastohydrodynamics of differential hypoid gears at high loads, ISSN: 0025-6455. DOI:
10.1007/s11012-013-9857-x.
Mohammadpour, M, Theodossiades, S, Rahnejat, H (2012)
Elastohydrodynamic lubrication of hypoid gear pairs at high loads, ISSN: 1350-6501. DOI:
10.1177/1350650111431027.
Vakili-Tahami, F, Zehsaz, M, Mohammadpour, M, Vakili-Tahami, A (2012)
Analysis of the hydrodynamic torque effects on large size butterfly valves and comparing results with AWWA C504 standard recommendations, ISSN: 1738-494X. DOI:
10.1007/s12206-012-0733-8.
Conferences
Andreou, P, Theodossiades, S, Hajjaj, AZ, Mohammadpour, M, Ricardo Souza, M (2024)
Reduced Order Model for Modal Analysis of Electric Motors Considering Material and Dimensional Variations. In
, SAE Technical Papers. DOI:
10.4271/2024-01-2945.
Ricardo Souza, M, Offner, G, Mohammadpour, M, Andreou, P, Theodossiades, S (2024)
Metrics Based Design of Electromechanical Coupled Reduced Order Model of an Electric Powertrain for NVH Assessment. In
, SAE Technical Papers. DOI:
10.4271/2024-01-2913.
Ghosh, P, Pacella, M, Mohammadpour, M, Roy, A (2024)
Numerical Analysis of Low Energy High Frequency Laser Shock Processing of Polycrystalline Diamond. In
, Mechanisms and Machine Science, pp.37-46, DOI:
10.1007/978-3-031-49413-0_4.
Andreou, P, Zemni, AHE, Mohammad-Pour, M, Theodossiades, S (2022)
Analytical multiphysics model for NVH prediction of a high-speed Surface-Permanent Magnet Synchronous Machine. In
53rd Spanish Congress of Acoustics 2022; Proceedings of the Spanish Congress of Acoustics, Alicante, Spain.
Friskney, B, Theodossiades, S, Mohammadpour, M (2020)
Analytical Rotordynamic Study of a High-Speed Gear Transmission System for Race Applications. In
, SAE Technical Papers. DOI:
10.4271/2020-01-1502.
Walker, J, Questa, H, Bewsher, R, Mohammadpour, M, Schweiger, C, Sopouch, M, Offner, G (2018)
Experimental design for characterization of force transmissibility through roller bearings in electric machines and transmissions. In
10th ISNVH Congress, Graz, Austria. DOI:
10.4271/2018-01-1473.
Bewsher, R, Leighton, M, Mohammadpour, M, Offner, G, Knaus, O (2018)
Surface characterization of a real-world cylinder liner subject to deposition from combustion. In
OeTG Symposium 2018, Tribology in Industry and Research, Wien, Austria.
Humphrey, E, Elisaus, V, Morris, N, Rahmani, R, Theodossiades, S, Mohammadpour, M (2018)
Effect of coating on transmissions efficiency [Abstract]. In
TriboBR 2018, Florianópolis, Brazil.
Friskney, BT, Motato, E, Haris, A, Mohammadpour, M, Theodossiades, S (2018)
A study on attenuating gear teeth oscillations at low engine speeds using nonlinear vibration absorbers. In
SAE Technical Papers,, DOI:
10.4271/2018-01-1477.
Bewsher, R, Mohammadpour, M, Rahmani, R, Rahnejat, H, Offner, G (2017)
A study into the effects of cylinder de-activation on the tribological performance of piston ring-liner conjunction. In
TriboUK 2017, Imperial College.
Sivayogan, G, Mohammadpour, M, Rahmani, R, Rahnejat, H, Offner, G, Sopouch, M (2017)
Elastohydrodynamic analysis in a multi-physics finite element environment. In
TriboUK 2017, Imperial College London.
Oglieve, C, Sivayogan, G, Mohammadpour, M, Rahnejat, H (2017)
Lubricated Loaded Tooth Contact Analysis (LLTCA) for Spur Gear Pairs. In
International Conference on Advance Vehicle Powertrains, Hangzhou, China.
Fatourehchi, E, Elisaus, V, Mohammadpour, M, Theodossiades, S, Rahnejat, H (2016)
Efficiency and durability predictions of high performance racing transmissions. In
9th International Styrian Noise, Vibration & Harshness Congress: The European Automotive Noise Conference, Graz, Austria. DOI:
10.4271/2016-01-1852.
Turnbull, R, Bewsher, R, Mohammadpour, M, Rahmani, R, Rahnejat, H (2016)
Tribodynamics of the piston compression ring conjunction. In
Powertrain Modelling and Control, Loughborough University.
Harris, A, Motato, E, Mohammadpour, M, Theodossiades, S, Rahnejat, H, Kelly, P, O'Mahony, M, Struve, B (2016)
Concept selection for clutch nonlinear absorber using PUGH matrix. In
PMC2016, Powertrain Modelling and Control, Loughborough University.
Oglieve, C, Mohammadpour, M, Rahnejat, H (2016)
Optimisation of vehicle transmission and shifting strategy for minimum fuel consumption under EU and US legislated drive cycles. In
PMC2016, Powertrain Modelling and Control, Loughborough University.
Fatourehchi, E, Mohammadpour, M, King, PD, Rahnejat, H, Trimmer, G, Womersley, B, Williams, A (2016)
Effect of tooth microgeometry profile modification on the efficiency of planetary hub gears. In
PMC2016, Powertrain Modelling and Control, Loughborough University.
Huerta, IM, Mohammadpour, M, Rahnejat, H (2016)
Analysis of lubricated contact in continuously variable transmissions (CVT). In
PMC2016, Powertrain Modelling and Control, Loughborough University.
Elisaus, V, Mohammadpour, M, Theodossiades, S, Rahnejat, H (2016)
Tribological investigation of truncated thermo-elastohydrodynamic elliptical point contacts in high performance transmissions. In
PMC2016, Powertrain Modelling and Control, Loughborough University.
Savva, K, Haris, A, Motato, E, Mohammadpour, M, Theodossiades, S, Rahnejat, H, Kelly, P, Vakakis, AF, Bergman, LA, McFarland, DM (2016)
Damping effects introduced by a nonlinear vibration absorber in automotive drivelines at idle engine speeds. In
9th International Styrian Noise, Vibration & Harshness Congress: The European Automotive Noise Conference, Graz, Austria. DOI:
10.4271/2016-01-1765.
Theodossiades, S, Rahnejat, Mohammad pour, (2014) Dynamic and efficiency modelling of the planetary gear sets for hybrid powertrains. In
Powertrain Modelling and Control (PMC 2014) conference, Bradford, UK.
Mohammadpour, M, Rahmani, R, Rahnejat, H (2014)
The effect of cylinder de-activation on thermo-friction characteristics of the connecting rod bearing in the New European Drive Cycle (NEDC). In
. DOI:
10.4271/2014-01-2089.
Theodossiades, S, Rahnejat H, Mohammadpour M, (2013) Tribo-dynamics of differential hypoid gears. In
ASME IDETC 2013 Conference, Portland, Oregon, USA.
Mohammadpour, M, Theodossiades, S, Rahnejat, H (2013)
Elastohydrodynamics of hypoid gears in axle whine conditions. In
. DOI:
10.4271/2012-01-1538.
Mohammadpour, M, Theodossiades, S, Rahnejat, H (2013)
Differential hypoid gears: the necessity for a multi-physics approach. In
.
Mohammadpour, M, Theodossiades, S, Rahnejat, H (2013)
Interactions between tribology and dynamics of automotive differential hypoid gears considering thermal non-newtonian mixed lubrication effects. In
,ISBN: 9788890818509.
Mohammadpour, M, Theodossiades, S, Rahnejat, H (2013)
Tribo-dynamics of differential hypoid gears. In
,ISBN: 978-0-7918-5592-8. DOI:
10.1115/DETC2013-12890.
Mohammadpour, M, Theodossiades, S, Rahnejat, H (2012)
Tribo-dynamics of differential hypoid gear pairs. In
,ISBN: 978-0957385108.
Mohammad Pour, M, Vakili Tahami, F, Mirzaee, I, Khalilarya, S (2010)
Analysis of the hydrodynamic torque effects on large size butterfly valves. In
Mechanical and Electrical Technology (ICMET), Singapore. DOI:
10.1109/ICMET.2010.5598343.
Mohammad Pour, M, Mirzaee, I, Khalilarya, S (2010)
A modified numerical method for calculations of film geometry of elasto-hydro-dynamic line contacts. In
Mechanical and Electrical Technology (ICMET), Singapore. DOI:
10.1109/ICMET.2010.5598354.
Mohammad Pour, M, Mirzaee, I, Eskandarzade, M, Khalilarya, S (2010)
An optimization aproach for design parameters in involute spur gears considering transmission error, gear size and lubrication parameters using Grey Relational Analysis Technique. In
2010 International Conference on Mechanical and Electrical Technology (ICMET), Singapore. DOI:
10.1109/ICMET.2010.5598344.
Mohammad Pour, M, Khalilarya, S, Mirzaee, I, Jalali-Vahid, D (2010)
A numerical model to calculate Elastohydrodynamic (EHL) properties in involute spur gears. In
Mechanical and Electrical Technology (ICMET), Singapore. DOI:
10.1109/ICMET.2010.5598355.
Mohammad Pour, M, Mirzaee, I, Khalilarya, S (2009)
A mathematical-numerical model to calculate load distribution, contact stiffness and transmission error in involute spur gears. In
ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, San Diego, California, USA. DOI:
10.1115/DETC2009-86676.
