Journal Articles
Zhang, L, Wang, Y, Yu, Z, Jiang, R, Baxevanakis, K,
Roy, A, Zhao, L, Tian, G, Song, Y (2024)
Thermo-mechanical fatigue crack growth in a nickel-based powder metallurgy superalloy,
International Journal of Fatigue, 186(2024), 108413, ISSN: 0142-1123. DOI:
10.1016/j.ijfatigue.2024.108413.
Zhang, T, Wang, X, Xia, X, Jiang, Y, Zhang, X, Zhao, L,
Roy, A, Gong, J, Tu, S (2023)
A robust life prediction model for a range of materials under creep-fatigue interaction loading conditions,
International Journal of Fatigue, 176, 107904, ISSN: 0142-1123. DOI:
10.1016/j.ijfatigue.2023.107904.
Stergiou, T, Baxevanakis, K,
Roy, A, Voronov, LV, Sazhenkov, NA, Nikhamkin, MS, Silberschmidt, V (2023)
Mechanics of ballistic impact with non-axisymmetric projectiles on thin aluminium targets. Part I: Failure mechanisms,
Engineering Failure Analysis, 150, 107152, ISSN: 1350-6307. DOI:
10.1016/j.engfailanal.2023.107152.
Dominguez-Caballero, J, Ayvar-Soberanis, S, Kim, J,
Roy, A, Li, L, Curtis, D (2023)
Hybrid simultaneous laser- and ultrasonic-assisted machining of Ti-6Al-4V alloy,
The International Journal of Advanced Manufacturing Technology, 125(3-4), pp.1903-1916, ISSN: 0268-3768. DOI:
10.1007/s00170-022-10764-5.
Kim, J, Zani, L, Abdul-Kadir, A,
Roy, A, Baxevanakis, K, Jones, L, Silberschmidt, V (2023)
Hybrid-hybrid turning of micro-SiCp/AA2124 composites: A comparative study of laser-and-ultrasonic vibration-assisted machining,
Journal of Manufacturing Processes, 86(2023), pp.109-125, ISSN: 1526-6125. DOI:
10.1016/j.jmapro.2022.12.045.
Wang, D, De Becker, D,
Roy, A (2022)
Ultrasonically Assisted Cutting of Histological Sections for Reducing the Environmental and Financial Impact of Microtomy,
Chinese Journal of Mechanical Engineering (English Edition), 35(1), ISSN: 1000-9345. DOI:
10.1186/s10033-022-00722-3.
Li, X, Kim, J,
Roy, A, Ayvar-Soberanis, S (2022)
High temperature and strain-rate response of AA2124-SiC metal matrix composites,
Materials Science and Engineering: A, 856, ISSN: 0921-5093. DOI:
10.1016/j.msea.2022.144014.
Stergiou, T, Baxevanakis, K,
Roy, A, Silberschmidt, V (2022)
Mechanics of ballistic impact with non-axisymmetric projectiles on thin aluminium targets. Part II: Energy considerations,
Engineering Failure Analysis, 143(Part B), 106818, ISSN: 1350-6307. DOI:
10.1016/j.engfailanal.2022.106818.
Moles, MD,
Roy, A, Silberschmidt, VV (2022)
Ultrasonically enhanced flow rate of polymer melt extrusion,
International Journal of Materials and Structural Integrity, 14(2-4), pp.273-286, ISSN: 1745-0055. DOI:
10.1504/ijmsi.2021.125798.
Mir, A, Luo, X, Llavori, I,
Roy, A, Zlatanovic, DL, Joshi, SN, Goel, S (2022)
Challenges and issues in continuum modelling of tribology, wear, cutting and other processes involving high-strain rate plastic deformation of metals,
Journal of the Mechanical Behavior of Biomedical Materials, 130, ISSN: 1751-6161. DOI:
10.1016/j.jmbbm.2022.105185.
Yeap, S, Baxevanakis, K,
Roy, A (2022)
A study on the effectiveness of explosive reactive armour against the penetration of long-rod projectiles,
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(15), pp.8462-8471, ISSN: 0954-4062. DOI:
10.1177/09544062221081402.
Kim, J, Zani, L, Abdul-Kadir, A, Jones, L,
Roy, A, Zhao, L, Silberschmidt, V (2022)
Hybrid-hybrid machining of SiC-reinforced aluminium metal matrix composite,
Manufacturing Letters, 32, pp.63-66, ISSN: 2213-8463. DOI:
10.1016/j.mfglet.2022.04.002.
Kim, J, Zani, L, Abdul-Kadir, A, Ribeiro, M,
Roy, A, Baxevanakis, K, Jones, L, Silberschmidt, V (2022)
Ultrasonically assisted turning of micro-SiCp/Al 2124 composite,
Procedia Structural Integrity, 37, pp.282-291, ISSN: 2452-3216. DOI:
10.1016/j.prostr.2022.01.086.
Demiral, M,
Roy, A, Silberschmidt, V (2022)
Numerical modelling of size effects in micro-cutting of f.c.c. single crystal: Influence of strain gradients,
Journal of Manufacturing Processes, 74, pp.511-519, ISSN: 1526-6125. DOI:
10.1016/j.jmapro.2021.12.036.
Santos, MVM, Sartorato, M,
Roy, A, Tita, V, Ribeiro, ML (2021)
Analysis of delamination of composite laminates via extended finite element method based on the layerwise displacement theory and cohesive zone method,
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 236(7), pp.1379-1389, ISSN: 1464-4207. DOI:
10.1177/14644207211046177.
Demiral, M,
Roy, A, Silberschmidt, V (2021)
A numerical study on influence of strain gradients on lattice rotation in micro-machining of a single crystal,
Challenge Journal of Structural Mechanics, 7(3), pp.117-122, DOI:
10.20528/cjsmec.2021.03.001.
Ghosh, P, Pacella, M, Cox, C, Mohammad-Pour, M,
Roy, A (2021)
Unprecedented hardness of polycrystalline diamond via laser surface engineering,
Surface and Coatings Technology, 419, 127302, ISSN: 0257-8972. DOI:
10.1016/j.surfcoat.2021.127302.
Stergiou, T, Baxevanakis, K,
Roy, A, Sazhenkov, NA, Nikhamkin, MS, Silberschmidt, V (2021)
Impact of polyurea-coated metallic targets: computational framework,
Composite Structures, 267, 113893, ISSN: 0263-8223. DOI:
10.1016/j.compstruct.2021.113893.
Stergiou, T, Baxevanakis, K,
Roy, A, Sazhenkov, N, Nikhamkin, MA, Silberschmidt, V (2021)
Effect of nose geometry on penetration capability of non-axisymmetric thin projectiles, 37(C), pp.250-256, ISSN: 2452-3216. DOI:
10.1016/j.prostr.2022.01.081.
Bai, W,
Roy, A, Guo, L, Xu, J, Silberschmidt, V (2020)
Analytical prediction of shear angle and frictional behaviour in vibration-assisted cutting,
Journal of Manufacturing Processes, 62, pp.37-46, ISSN: 1526-6125. DOI:
10.1016/j.jmapro.2020.12.026.
Sazhenkov, NA, Semenov, SV, Voronov, LV, Kurakin, AD, Nikhamkin, MS, Baxevanakis, K,
Roy, A, Stergiou, T, Silberschmidt, V (2020)
Polyurea-coated glass-fibre-reinforced laminate under high-speed impact: experimental study,
Procedia Structural Integrity, 28, pp.1572-1578, ISSN: 2452-3216. DOI:
10.1016/j.prostr.2020.10.129.
Stergiou, T, Baxevanakis, K,
Roy, A, Sazhenkov, N, Nikhamkin, MA, Silberschmidt, V (2020)
Ballistic performance of polyurea-coated thin aluminium plates: numerical study,
Procedia Structural Integrity, 28, pp.1258-1266, ISSN: 2452-3216. DOI:
10.1016/j.prostr.2020.11.107.
Airao, J, Khanna, N,
Roy, A, Hegab, H (2020)
Comprehensive experimental analysis and sustainability assessment of machining Nimonic 90 using ultrasonic-assisted turning facility,
The International Journal of Advanced Manufacturing Technology, 109(5-6), pp.1447-1462, ISSN: 0268-3768. DOI:
10.1007/s00170-020-05686-z.
Bisht, A, Kumar, S, Pang, KH, Zhou, R,
Roy, A, Silberschmidt, V, Suwas, S (2020)
Shear band widening mechanism in Ti–6Al–4V under high strain rate deformation,
Journal of Materials Research, 35(13), pp.1623-1634, ISSN: 0884-2914. DOI:
10.1557/jmr.2020.45.
Zhang, D, Zhao, L,
Roy, A (2020)
A multiscale-indentation study of deformation and fracture in 6H polycrystalline silicon carbide,
Materials Science and Technology, 36(10), pp.1111-1124, ISSN: 0267-0836. DOI:
10.1080/02670836.2020.1755139.
Pang, KH, Zhou, R,
Roy, A (2020)
Deformation characteristics in micromachining of single crystal 6H-SiC: Insight into slip systems activation,
Journal of Mechanics, 36(2), pp.245-253, ISSN: 1727-7191. DOI:
10.1017/jmech.2019.63.
Zhang, D, Zhao, L,
Roy, A, Chiu, Y-L (2019)
Nanoscale investigation of deformation characteristics in a polycrystalline silicon carbide,
Journal of the Australian Ceramic Society, 56, ISSN: 2510-1560. DOI:
10.1007/s41779-019-00431-6.
Zhou, R, Pang, K-HX, Bisht, A,
Roy, A, Suwas, S, Silberschmidt, V (2019)
Modelling strain localization in Ti-6Al-4V at high loading rate: a phenomenological approach,
Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 378(2162), 20190105, ISSN: 1364-503X. DOI:
10.1098/rsta.2019.0105.
Sharma, V, Pandey, PM, Dixit, US,
Roy, A, Silberschmidt, V (2019)
Finite element simulations of conventional and ultrasonically assisted turning processes with plane and textured cutting inserts,
Journal of Micromanufacturing, 3(1), pp.54-68, ISSN: 2516-5984. DOI:
10.1177/2516598419878022.
Wang, D,
Roy, A, Silberschmidt, V (2019)
Production of high-quality extremely-thin histological sections by ultrasonically assisted cutting,
Journal of Materials Processing Technology, 276, 116403, ISSN: 0924-0136. DOI:
10.1016/j.jmatprotec.2019.116403.
Mikhailova, N, Onawumi, PY, Volkov, G, Smirnov, I, Broseghini, M,
Roy, A, Petrov, Y, Silberschmidt, V (2019)
Ultrasonically assisted drilling in marble,
Journal of Sound and Vibration, 460, 114880, ISSN: 0022-460X. DOI:
10.1016/j.jsv.2019.114880.
Zhou, R,
Roy, A, Silberschmidt, V (2019)
A crystal-plasticity model of extruded AM30 magnesium alloy,
Computational Materials Science, ISSN: 0927-0256. DOI:
10.1016/j.commatsci.2019.109140.
Kim, J, Bai, W,
Roy, A, Jones, L, Ayvar-Soberanis, S, Silberschmidt, V (2019)
Hybrid machining of metal-matrix composite,
Procedia CIRP, 82, pp.184-189, ISSN: 2212-8271. DOI:
10.1016/j.procir.2019.04.162.
Bisht, A, Kamble, N, Kumar, L, Avadhani, GS,
Roy, A, Silberschmidt, V, Suwas, S (2019)
Deformation response and microstructural evolution of as-cast Mg alloys AM30 and AM50 during hot compression,
International Journal of Materials Research, 110(6), pp.524-533, ISSN: 1862-5282. DOI:
10.3139/146.111766.
Zhao, N,
Roy, A, Wang, W, Zhao, LG, Silberschmidt, VV (2019)
Coupling crystal plasticity and continuum damage mechanics for creep assessment in Cr-based power-plant steel,
Mechanics of Materials, 130, pp.29-38, ISSN: 0167-6636. DOI:
10.1016/j.mechmat.2019.01.006.
Wang, D, Onawumi, PY, Ismail, SO, Dhakal, HN, Popov, I, Silberschmidt, V,
Roy, A (2019)
Machinability of natural-fibre-reinforced polymer composites: Conventional vs ultrasonically-assisted machining,
Composites Part A: Applied Science and Manufacturing, ISSN: 1359-835X. DOI:
10.1016/j.compositesa.2019.01.028.
Bai, W,
Roy, A, Sun, R, Silberschmidt, V (2019)
Enhanced machinability of SiC-reinforced metal-matrix composite with hybrid turning,
Journal of Materials Processing Technology, 268, pp.149-161, ISSN: 0924-0136. DOI:
10.1016/j.jmatprotec.2019.01.017.
Coles, LA,
Roy, A, Silberschmidt, V (2019)
Ice vs. steel: Ballistic impact of woven carbon/epoxy composites. Part II – Numerical modelling,
Engineering Fracture Mechanics, 225, 106297, ISSN: 0013-7944. DOI:
10.1016/j.engfracmech.2018.12.030.
Zhang, L, Zhao, L,
Roy, A, Silberschmidt, V, McColvin, G (2018)
Low-cycle fatigue of single crystal nickel-based superalloy – mechanical testing and TEM characterisation,
Materials Science and Engineering: A, ISSN: 0921-5093. DOI:
10.1016/j.msea.2018.12.084.
Coles, LA,
Roy, A, Sazhenkov, N, Voronov, L, Nikhamkin, M, Silberschmidt, V (2018)
Ice vs. steel: Ballistic impact of woven carbon/epoxy composites. Part I – Deformation and damage behaviour,
Engineering Fracture Mechanics, 225, 106270, ISSN: 0013-7944. DOI:
10.1016/j.engfracmech.2018.12.003.
Mikhailova, NV, Volkov, GA, Petrov, YV, Smirnov, IV, Onawumi, PY,
Roy, A, Silberschmidt, V (2018)
Relations between parameters of fracture processes on different scale levels,
Doklady Physics, 63(11), pp.459-461, ISSN: 1028-3358. DOI:
10.1134/S1028335818110095.
Misra, A, Pandey, PM, Dixit, US,
Roy, A, Silberschmidt, V (2018)
Multi-objective optimization of ultrasonic-assisted magnetic abrasive finishing process,
International Journal of Advanced Manufacturing Technology, ISSN: 0268-3768. DOI:
10.1007/s00170-018-3060-0.
Zhang, L, Zhao, L,
Roy, A, Silberschmidt, V, McColvin, G (2018)
In-situ SEM study of slip-controlled short-crack growth in single-crystal nickel superalloy,
Materials Science and Engineering: A, 742, pp.564-572, ISSN: 0921-5093. DOI:
10.1016/j.msea.2018.11.040.
Wang, C, Chen, Z, Silberschmidt, V,
Roy, A (2018)
Damage accumulation in braided textiles-reinforced composites under repeated impacts: Experimental and numerical studies,
Composite Structures, 204, pp.256-267, ISSN: 0263-8223. DOI:
10.1016/j.compstruct.2018.07.084.
Zhang, D, Zhao, L,
Roy, A (2018)
Mechanical behaviour of silicon carbide under static and dynamic compression,
Journal of Engineering Materials and Technology, Transactions of the ASME, ISSN: 0094-4289. DOI:
10.1115/1.4040591.
Nekouie, V, Doak, S,
Roy, A, Kuhn, U, Silberschmidt, V (2018)
Experimental studies of shear bands in Zr-Cu metallic glass,
Journal of Non-Crystalline Solids, ISSN: 0022-3093. DOI:
10.1016/j.jnoncrysol.2018.01.009.
Lin, B, Huang, M, Zhao, L,
Roy, A, Silberschmidt, V, Barnard, NC, Whittaker, MT, McColvin, G (2018)
3D DDD modelling of dislocation-precipitate interaction in a nickel-based single crystal superalloy under cyclic deformation,
Philosophical Magazine, ISSN: 1478-6435.
Muhammad, R, Ahmed, N, Ullah, H,
Roy, A, Silberschmidt, V (2018)
Hybrid machining process: experimental and numerical analysis of hot ultrasonically assisted turning,
International Journal of Advanced Manufacturing Technology, pp.1-20, ISSN: 0268-3768. DOI:
10.1007/s00170-018-2087-6.
Bai, W, Bisht, A,
Roy, A, Suwas, S, Sun, R, Silberschmidt, V (2018)
Improvements of machinability of aerospace-grade Inconel alloys with ultrasonically assisted hybrid machining,
International Journal of Advanced Manufacturing Technology, ISSN: 0268-3768. DOI:
10.1007/s00170-018-3012-8.
Pang, K-HX, Tymicki, E,
Roy, A (2017)
Indentation in single-crystal 6H silicon carbide: Experimental investigations and finite element analysis,
International Journal of Mechanical Sciences, 144, pp.858-864, ISSN: 0020-7403. DOI:
10.1016/j.ijmecsci.2017.11.021.
Wang, C,
Roy, A, Silberschmidt, V, Chen, Z (2017)
Modelling of damage evolution in braided composites: recent developments,
Mechanics of Advanced Materials and Modern Processes, 3(1), 15, ISSN: 2198-7874. DOI:
10.1186/s40759-017-0030-4.
Liu, Q,
Roy, A, Silberschmidt, V (2017)
Temperature-dependent crystal-plasticity model for magnesium: a bottom-up approach,
Mechanics of Materials, 113, pp.44-56, ISSN: 0167-6636. DOI:
10.1016/j.mechmat.2017.07.008.
Shukla, VC, Pandey, PM, Dixit, US,
Roy, A, Silberschmidt, V (2017)
Modeling of normal force and finishing torque considering shearing and ploughing effects in ultrasonic assisted magnetic abrasive finishing process with sintered magnetic abrasive powder,
Wear, 390-391, pp.11-22, ISSN: 0043-1648. DOI:
10.1016/j.wear.2017.06.017.
Demiral, M, Nowag, K,
Roy, A, Ghisleni, R, Michler, J, Silberschmidt, VV (2017)
Enhanced gradient crystal-plasticity study of size effects in a β -titanium alloy,
Modelling and Simulation in Materials Science and Engineering, 25(3), pp.035013-035013, ISSN: 0965-0393. DOI:
10.1088/1361-651X/aa5ce3.
Kamal, SM, Dixit, US,
Roy, A, Liu, Q, Silberschmidt, V (2017)
Comparison of plane-stress, generalized-plane-strain and 3D FEM elastic–plastic analyses of thick-walled cylinders subjected to radial thermal gradient,
International Journal of Mechanical Sciences, 131-132, pp.744-752, ISSN: 0020-7403. DOI:
10.1016/j.ijmecsci.2017.07.034.
Bai, W, Sun, R,
Roy, A, Silberschmidt, V (2017)
Improved analytical prediction of chip formation in orthogonal cutting of titanium alloy Ti6Al4V,
International Journal of Mechanical Sciences, 133, pp.357-367, ISSN: 0020-7403. DOI:
10.1016/j.ijmecsci.2017.08.054.
Wang, C,
Roy, A, Chen, Z, Silberschmidt, V (2017)
Braided textile composites for sports protection: Energy absorption and delamination in impact modelling,
Materials and Design, 136, pp.258-269, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2017.10.006.
Misra, A, Pandey, PM, Dixit, US,
Roy, A, Silberschmidt, V (2017)
Modeling of finishing force and torque in ultrasonic-assisted magnetic abrasive finishing process,
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, ISSN: 0954-4054. DOI:
10.1177/0954405417737579.
Lin, B, Huang, M, Farukh, F,
Roy, A, Silberschmidt, V, Zhao, L (2016)
Modelling plastic deformation in a single-crystal nickel-based superalloy using discrete dislocation dynamics,
Mechanics of Advanced Materials and Modern Processes, 2(6), ISSN: 2198-7874. DOI:
10.1186/s40759-016-0012-y.
Liu, Q,
Roy, A, Tamura, S, Matsumura, T, Silberschmidt, VV (2016)
Micro-cutting of single-crystal metal: Finite-element analysis of deformation and material removal,
International Journal of Mechanical Sciences, 118, pp.135-143, ISSN: 0020-7403. DOI:
10.1016/j.ijmecsci.2016.09.021.
Zahedi, SA,
Roy, A, Silberschmidt, V (2016)
Variation of cutting forces in machining of f.c.c. single crystals,
Acta Mechanica, ISSN: 0001-5970. DOI:
10.1007/s00707-015-1418-z.
Wang, C, Zhong, Y, Adaikalaraj, PFB, Ji, X,
Roy, A, Silberschmidt, V, Chen, Z (2016)
Strength prediction for bi-axial braided composites by a multi-scale modelling approach,
Journal of Materials Science, pp.1-17, ISSN: 0022-2461. DOI:
10.1007/s10853-016-9901-z.
Liu, Q,
Roy, A, Silberschmidt, V (2016)
Size-dependent crystal plasticity: from micro-pillar compression to bending,
Mechanics of Materials, 100, pp.31-40, ISSN: 0167-6636. DOI:
10.1016/j.mechmat.2016.06.002.
Shi, QA, Tse, Y, Muhammad, R,
Roy, A, Silberschmidt, V, Higginson, R (2016)
Effect of machining on shear-zone microstructure in Ti-15V-3Cr-3Al-3Sn: conventional and ultrasonically assisted turning,
Journal of Materials Engineering and Performance, pp.1-8, ISSN: 1059-9495. DOI:
10.1007/s11665-016-2209-y.
Muhammad, R, Mistry, A, Khan, SW, Ahmed, N,
Roy, A, Silberschmidt, V (2016)
Analysis of tool wear in ultrasonically assisted turning of beta-Ti-15V-3Al-3Cr-3Sn alloy,
SCIENTIA IRANICA, 23(4), pp.1800-1810, ISSN: 1026-3098.
Demiral, M,
Roy, A, Silberschmidt, V (2015)
Strain-gradient crystal-plasticity modelling of micro-cutting of b.c.c. single crystal,
MECCANICA, 51(2), pp.371-381, ISSN: 0025-6455. DOI:
10.1007/s11012-015-0280-3.
Zahedi, SA,
Roy, A, Silberschmidt, V (2015)
Modelling of vibration assisted machining f.c.c single crystal,
Procedia CIRP, 31, pp.393-398, ISSN: 2212-8271. DOI:
10.1016/j.procir.2015.03.029.
Wang, C, Ji, X,
Roy, A, Silberschmidt, V, Chen, Z (2015)
Shear strength and fracture toughness of carbon fibre/epoxy interface: effect of surface treatment,
Materials and Design, 85, pp.800-807, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2015.07.104.
Muhammad, M, Hussain, MS, Maurotto, A, Siemers, C,
Roy, A, Silberschmidt, VV (2014)
Analysis of a free machining α+β titanium alloy using conventional and
ultrasonically assisted turning,
Journal of Materials Processing Technology, 241(4), pp.906-915, DOI:
10.1016/j.jmatprotec.2013.12.002.
Phadnis, VA, Kumar, P, Shukla, A,
Roy, A, Silberschmidt, VV (2014)
Optimising curvature of carbon fibre-reinforced polymer composite panel for improved blast resistance: Finite-element analysis,
Materials and Design, 57, pp.719-727, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2014.01.034.
Muhammad, R, Maurotto, A, Demiral, M,
Roy, A, Silberschmidt, V (2014)
Thermally enhanced ultrasonically assisted machining of Ti alloy, ISSN: 1755-5817. DOI:
10.1016/j.cirpj.2014.01.002.
Maurotto, A, Siemers, C, Muhammad, R,
Roy, A, Silberschmidt, V (2014)
Ti alloy with enhanced machinability in UAT turning,
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45(6), pp.2768-2775, ISSN: 1073-5623. DOI:
10.1007/s11661-014-2236-y.
Demiral, M,
Roy, A, Sayed, TE, Silberschmidt, V (2014)
Influence of strain gradients on lattice rotation in nano-indentation experiments: a numerical study,
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 608, pp.73-81, ISSN: 0921-5093. DOI:
10.1016/j.msea.2014.04.033.
Demiral, M,
Roy, A, Sayed, TE, Silberschmidt, V (2014)
Numerical modelling of micro-machining of f.c.c. single crystal: influence of strain gradients,
Computational Materials Science, 94(C), pp.273-278, ISSN: 0927-0256. DOI:
10.1016/j.commatsci.2014.05.058.
Makhdum, F, Phadnis, VA,
Roy, A, Silberschmidt, V (2014)
Effect of ultrasonically-assisted drilling on carbon-fibre-reinforced plastics,
Journal of Sound and Vibration, 333(23), pp.5939-5952, ISSN: 0022-460X. DOI:
10.1016/j.jsv.2014.05.042.
Silberschmidt, V, Mahdy, SMA, Gouda, MA, Naseer, A, Maurotto, A,
Roy, A (2014)
Surface-roughness improvement in ultrasonically assisted turning, 13, pp.49-54, DOI:
10.1016/j.procir.2014.04.009.
Zahedi, SA, Demiral, M,
Roy, A, Silberschmidt, VV (2013)
FE/SPH modelling of orthogonal micro-machining of f.c.c. single crystal,
Computational Materials Science, 78, pp.104-109, ISSN: 0927-0256. DOI:
10.1016/j.commatsci.2013.05.022.
Phadnis, VA,
Roy, A, Silberschmidt, VV (2013)
Ultrasonically assisted drilling: A finite-element model incorporating acoustic softening effects,
Journal of Physics: Conference Series, 451, pp.012040-012040, DOI:
10.1088/1742-6596/451/1/012040.
Maurotto, A, Muhammad, R,
Roy, A, Silberschmidt, VV (2013)
Enhanced ultrasonically assisted turning of a β-titanium alloy,
Ultrasonics, in print, DOI:
10.1016/j.ultras.2013.03.006.
Acharya, A,
Roy, A, Sawant, A (2013) 1. The Modeling Challenge posed by Mesoscopic Plasticity,
n/a.
Puri, S,
Roy, A, Acharya, A, Dimiduk, D (2013) Recent Issues,
The Journal, 1, 1-8.
Acharya, A and
Roy, A (2013) On the Accounting of Dislocation Internal Stress in Continuum Plasticity,
n/a.
Demiral, M,
Roy, A, Silberschmidt, VV (2013)
Indentation studies in b.c.c. crystals with enhanced model of strain-gradient crystal plasticity,
Computational Materials Science, ISSN: 0927-0256. DOI:
10.1016/j.commatsci.2013.06.057.
Phadnis, VA,
Roy, A, Silberschmidt, VV (2013)
A finite element model of ultrasonically assisted drilling in carbon/epoxy composites,
Procedia CIRP, 8, pp.141-146, DOI:
10.1016/j.procir.2013.06.079.
Phadnis, VA, Kumar, P, Shukla, A,
Roy, A, Silberschmidt, VV (2013)
Effect of plate curvature on blast response of carbon/epoxy composite,
Key Engineering Materials, 569-570, pp.41-48, ISSN: 1013-9826. DOI:
10.4028/www.scientific.net/KEM.569-570.41.
Phadnis, VA, Makhdum, F,
Roy, A, Silberschmidt, VV (2013)
Ultrasonically assisted drilling: Machining towards improved structural integrity in carbon/epoxy composites,
Key Engineering Materials, 569-570, pp.49-55, ISSN: 1013-9826. DOI:
10.4028/www.scientific.net/KEM.569-570.49.
Nekouie, V, Abeygunawardane-Arachchige, G, Kühn, U, Roy, A, Silberschmidt, VV (Accepted for publication) Indentation-induced deformation localisation in Zr-Cu-based metallic glass, Journal of Alloys and Compounds, ISSN: 0925-8388. DOI: 10.1016/j.jallcom.2013.12.002.
Zahedi, SA,
Roy, A, Silberschmidt, VV (2013)
Modeling of Micro-machining Single-crystal f.c.c. Metals,
Procedia CIRP, 8, pp.346-350, ISSN: 2212-8271. DOI:
10.1016/j.procir.2013.06.114.
Muhammad, R,
Roy, A, Silberschmidt, VV (2013)
Finite Element Modelling of Conventional and Hybrid Oblique Turning Processes of Titanium Alloy,
Procedia CIRP, 8, pp.510-515, ISSN: 2212-8271. DOI:
10.1016/j.procir.2013.06.142.
Demiral, M,
Roy, A, Silberschmidt, VV (2012) Deformation processes of advanced alloy in indentation and turning,
Computers, Materials and Continua, 31(3), pp.157-171, ISSN: 1546-2218.
Puri, S and
Roy, A (2012)
Plastic deformation of multicrystalline thin films: Grain size distribution vs. grain orientation,
Computational Materials Science, 52(1), pp.20-24, ISSN: 0927-0256. DOI:
10.1016/j.commatsci.2011.03.001.
Maurotto, A,
Roy, A, Babitsky, VI, Silberschmidt, VV (2012) Analysis of Machinability of Ti-and Ni-Based Alloys,
Solid State Phenomena, 188, pp.330-338.
Phadnis, V, Makhdum, F,
Roy, A, Silberschmidt, VV (2012) Drilling-Induced Damage in CFRP Laminates: Experimental and Numerical Analysis,
Solid State Phenomena, 188, pp.150-157.
Zahedi, A, Demiral, M,
Roy, A, Babitsky, VI, Silberschmidt, VV (2012) Indentation in fcc single crystals,
Solid State Phenomena, 188, pp.219-225.
Makhdum, F, Norddin, DNP,
Roy, A, Silberschmidt, VV (2012)
Ultrasonically assisted drilling of carbon fibre reinforced plastics,
Solid State Phenomena, 188, pp.170-175.
Muhammad, R, Maurotto, A,
Roy, A, Silberschmidt, VV (2012) Ultrasonically assisted turning of Ti-6Al-2Sn-4Zr-6Mo,
Journal of Physics: Conference Series, 382, pp.012016-012016.
Phadnis, VA,
Roy, A, Silberschmidt, VV (2012) Finite element analysis of drilling in carbon fiber reinforced polymer composites,
Journal of Physics: Conference Series, 382, pp.012014-012014.
Phadnis, VA, Makhdum, F,
Roy, A, Silberschmidt, VV (2012) Experimental and Numerical Investigations in Conventional and Ultrasonically Assisted Drilling of CFRP Laminate,
Procedia CIRP, 1, pp.455-459.
Muhammad, R, Maurotto, A,
Roy, A, Silberschmidt, VV (2012) Hot ultrasonically assisted turning of β-Ti alloy,
Procedia CIRP, 1, pp.336-341.
Maurotto, A, Muhammad, R,
Roy, A, Babitsky, VI, Silberschmidt, VV (2012) Comparing Machinability of Ti-15-3-3-3 and Ni-625 Alloys in Uat,
Procedia CIRP, 1, pp.330-335.
Muhammad, R, Ahmed, N,
Roy, A, Silberschmidt, VV (2012) Numerical Modelling of Vibration-Assisted Turning of Ti-15333,
Procedia CIRP, 1, pp.347-352.
Makhdum, F, Jennings, LT,
Roy, A, Silberschmidt, VV (2012) Cutting forces in ultrasonically assisted drilling of carbon fibre-reinforced plastics,
Journal of Physics: Conference Series, 382, pp.012019-012019.
Makhdum, F,
Roy, A, Silberschmidt, VV (2012) Numerical analysis and noise detection for design optimisation of an ultrasonic transducer,
Journal of Physics: Conference Series, 382, pp.012062-012062.
Zahedi, A, Li, S,
Roy, A, Babitsky, V, Silberschmidt, VV (2012)
Application of smooth-particle hydrodynamics in metal machining,
Journal of Physics: Conference Series, 382(1), ISSN: 1742-6588. DOI:
10.1088/1742-6596/382/1/012017.
Phadnis, VA, Makhdum, F,
Roy, A, Silberschmidt, VV (2012)
Drilling in carbon/epoxy composites: experimental investigations and finite element implementation,
Composites Part A: Applied Science and Manufacturing.
Phadnis, VA, Makhdum, F,
Roy, A, Silberschmidt, VV (2012) Ultrasonically assisted drilling in CFRP composites,
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials.
Muhammad, R, Ahmed, N,
Roy, A, Silberschmidt, VV (2012) Turning of advanced alloys with vibrating cutting tool,
Solid State Phenomena, 188, pp.277-284.
Muhammad, R, Ahmed, N, Demiral, M,
Roy, A, Silberschmidt, VV (2011)
Computational Study of Ultrasonically-Assisted Turning of Ti Alloys,
Advanced Materials Research, 223, pp.30-36.
Demiral, M, Leemet, T, Hokka, M, Kuokkala, VT,
Roy, A, Silberschmidt, VV (2011)
Finite-element simulations of split Hopkinson test of Ti-based alloy,
Advanced Materials Research, 223, pp.296-303.
Puri, S and
Roy, A (2011) Plastic deformation of multicrystalline thin films: Grain size distribution vs. grain orientation,
Computational Materials Science.
Demiral, M,
Roy, A, Silberschmidt, VV (2011)
Dynamic behavior of advanced Ti alloy under impact loading: Experimental and numerical analysis,
Applied Mechanics and Materials, 70, pp.207-212.
Muhammad, R, Maurotto, A,
Roy, A, Silberschmidt, VV (2011)
Analysis of forces in vibro-impact and hot vibro-impact turning of advanced alloys,
Applied Mechanics and Materials, 70, pp.315-320.
Muhammad, R, Maurotto, A, Demiral, M,
Roy, A, Silberschmidt, VV (2011) 3D finite element analysis of hot ultrasonically assisted turning of modern alloys,
ICCES: International Conference on Computational & Experimental Engineering and Sciences, 19, pp.95-96.
Demiral, M,
Roy, A, Silberschmidt, VV (2011) Deformation mechanisms in advanced Ti-based alloy in instrument-workpiece interaction,
ICCES: International Conference on Computational & Experimental Engineering and Sciences, 17, pp.87-88.
Demiral, M,
Roy, A, Silberschmidt, VV (2010) Effects of loading conditions on deformation process in indentation,
Computers, Materials and Continua, 19(2), pp.199-216, ISSN: 1546-2218.
Demiral, M,
Roy, A, Silberschmidt, VV (2010) Repetitive indentation of Ti-based alloys: A numerical study,
IOP Conference Series: Materials Science and Engineering, 10, pp.012105-012105.
Roy, A, Demiral, M, Silberschmidt, V (2010)
Effects of Loading Conditions on Deformation Process in Indentation,
Computers, Materials & Continua, 19(2), pp.199-216, DOI:
10.3970/cmc.2010.019.199.
Peerlings, RHJ, Kasyanyuk, Y,
Roy, A, Geers, MGD (2010) Higher-Order Mesoscopic Theories of Plasticity Based on Discrete Dislocation Interactions,
Mechanics of Generalized Continua, pp.245-250.
Puri, S,
Roy, A, Acharya, A, Dimiduk, D (2009)
Modeling dislocation sources and size effects at initial yield in continuum plasticity,
Journal of Mechanics of Materials and Structures, 4, pp.1603-1618.
Roy, A, Peerlings, RHJ, Geers, MGD, Kasyanyuk, Y (2008)
Continuum modeling of dislocation interactions: Why discreteness matters?,
Materials Science and Engineering: A, 486, pp.653-661.
Geers, MGD,
Roy, A, Peerlings, RHJ, Hoefnagels, JPM (2008) COMPUTATIONAL ANALYSIS OF SIZE EFFECTS USING ADVANCED CRYSTAL PLASTICITY MODELS.
Roy, A, Puri, S, Acharya, A (2007) Phenomenological mesoscopic field dislocation mechanics, lower-order gradient plasticity, and transport of mean excess dislocation density,
Modelling and Simulation in Materials Science and Engineering, 15, pp.S167-S167.
Roy, A and Acharya, A (2006)
Size effects and idealized dislocation microstructure at small scales: predictions of a phenomenological model of Mesoscopic Field Dislocation Mechanics: Part I,
Journal of the Mechanics and Physics of Solids, 54, pp.1687-1710, DOI:
10.1016/j.jmps.2006.01.009.
Acharya, A,
Roy, A, Sawant, A (2006) Continuum theory and methods for coarse-grained, mesoscopic plasticity,
Scripta materialia, 54, pp.705-710.
Acharya, A and
Roy, A (2006) Size effects and idealized dislocation microstructure at small scales: predictions of a phenomenological model of Mesoscopic Field Dislocation Mechanics: Part I,
Journal of the Mechanics and Physics of Solids, 54, pp.1687-1710.
Roy, A and Acharya, A (2006) Size effects and idealized dislocation microstructure at small scales: predictions of a phenomenological model of Mesoscopic Field Dislocation Mechanics: Part II,
Journal of the Mechanics and Physics of Solids, 54, pp.1711-1743.
Roy, A and Acharya, A (2005)
Finite element approximation of field dislocation mechanics,
Journal of the Mechanics and Physics of Solids, 53, pp.143-170, DOI:
10.1016/j.jmps.2004.05.007.
Roy, A and Acharya, A (2005) Finite element approximation of field dislocation mechanics,
Journal of the Mechanics and Physics of Solids, 53, pp.143-170.
Roy, A (2005) Computational approach to phenomenological mesoscopic field dislocation mechanics.
Conferences
Hewavidana, P, Baxevanakis, K,
Roy, A, Zhao, L (2024)
A fully-coupled hydrogen diffusion computational model for single crystal nickel-based superalloy. In Ball, AD, Wang, Z, Ouyang, H, Sinha, JK (ed)
UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023); UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023), Huddersfield, UK,ISBN: 9783031494208. DOI:
10.1007/978-3-031-49413-0_88.
Abdul-Kadir, A, Baxevanakis, K,
Roy, A (2024)
High-frequency electrically-assisted turning: Application to aluminium. In Ball, AD, Wang, Z, Ouyang, H, Sinha, JK (ed)
Proceedings of the UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023), pp.13-20, ISBN: 9783031494208. DOI:
10.1007/978-3-031-49421-5_2.
Ghosh, P, Pacella, M, Mohammadpour, M,
Roy, A (2024)
Numerical Analysis of Low Energy High Frequency Laser Shock Processing of Polycrystalline Diamond. In
, Mechanisms and Machine Science, pp.37-46, DOI:
10.1007/978-3-031-49413-0_4.
Zhang, L, Zhao, LG,
Roy, A, Silberschmidt, VV, McColvin (retired), G (2019)
Initiation and growth of short cracks in a nickel-based single crystal superalloy. In
, pp.388-391, DOI:
10.1201/9780429426506-68.
Zhou, R,
Roy, A, Silberschmidt, VV (2019)
Modelling the temperature and strain-rate effects of extruded magnesium alloy accounting for deformation slip and twinning. In
, pp.375-378, DOI:
10.1201/9780429426506-65.
Pang, KH, Wang, D,
Roy, A, Redman, I, Castelli, M, Dunleavey, J, Dawson, D, Parkinson, L, Lindsey, K, Lidgett, M (2019)
Vibration-assisted robotic machining in advanced materials. In
, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019, pp.408-409, DOI:
10.1201/9780429426506-72.
Mikhailova, NV, Onawumi, PY,
Roy, A, Silberschmidt, V (2018)
Ultrasonically assisted drilling of rocks. In
AIP Conference Proceedings,, DOI:
10.1063/1.5034699.
Onawumi, PY,
Roy, A, Silberschmidt, V, Merson, E (2018)
Ultrasonically assisted drilling of aerospace CFRP/Ti stacks. In
Procedia CIRP, pp.383-386, DOI:
10.1016/j.procir.2018.09.041.
Bai, W, Bisht, A,
Roy, A, Suwas, S, Sun, R, Silberschmidt, VV (2018)
Effect of hybrid machining on structural integrity of aerospace-grade materials. In
, Procedia CIRP, pp.163-166, DOI:
10.1016/j.procir.2018.08.266.
Zhang, D (2018)
Deformation characteristics in 6H-silicon carbide: effects of loading rate, length scale and irradiation. In
.
Coles, LA,
Roy, A, Silberschmidt, V (2017)
Micro CT analysis of dynamic damage in laminates: impact vs. blast loading. In
Journal of Physics: Conference Series,, DOI:
10.1088/1742-6596/842/1/012077.
Coles, LA,
Roy, A, Voronov, L, Semenov, S, Nikhamkin, M, Sazhenkov, N, Silberschmidt, V (2017)
Impact damage in woven carbon fibre/epoxy laminates: Analysis of damage and dynamic strain fields. In
, Rome, Italy, pp.2500-2505, DOI:
10.1016/j.proeng.2017.09.420.
Coles, LA,
Roy, A, Silberschmidt, V, Novac, B, Alotaibi, FT, Senior, P, Smith, I (2017)
Analysis of pulsed electroplasticity in metals. In
2017 IEEE 21ST INTERNATIONAL CONFERENCE ON PULSED POWER (PPC),, ISBN: 9781509057481. DOI:
10.1109/PPC.2017.8291317.
Alotaibi, FT, Novac, B, Senior, P, Smith, I, Nekouie, V,
Roy, A, Silberschmidt, V (2017)
Magneto-forming studies. In
2017 IEEE 21ST INTERNATIONAL CONFERENCE ON PULSED POWER (PPC),, ISBN: 9781509057481. DOI:
10.1109/PPC.2017.8291316.
Coles, LA, Tilton, C,
Roy, A, Shukla, A, Silberschmidt, VV (2017)
Dynamic damage in woven carbon/epoxy composites due to air blast. In
, Procedia Structural Integrity, pp.5-10, DOI:
10.1016/j.prostr.2017.11.002.
Wang, C,
Roy, A, Silberschmidt, VV, Chen, Z (2017) Damage accumulation in braided textile composites under multiple impacts: Experimental and numerical studies. In
, ICF 2017 - 14th International Conference on Fracture, pp.580-581.
Coles, LA, Tilton, C,
Roy, A, Shukla, A, Silberschmidt, VV (2017) Air-blast fracture in woven carbon fibre/epoxy laminates. In
, ICF 2017 - 14th International Conference on Fracture, pp.683-684.
Coles, LA,
Roy, A, Silberschmidt, VV, Voronov, L, Sazhenkov, N, Nikhamkin, M (2017) Impact damage in woven carbon fibre/epoxy laminates: Analysis of damage and dynamic strain fields. In
, ICF 2017 - 14th International Conference on Fracture, pp.497-498.
Wang, D,
Roy, A, Silberschmidt, V (2016)
Ultrasonically assisted cutting of bio-tissues in microtomy. In
, Physics Procedia, pp.118-124, DOI:
10.1016/j.phpro.2016.12.018.
Wang, D,
Roy, A, Silberschmidt, V (2016)
Hybrid cutting of bio-tissues. In
Procedia CIRP, pp.567-570, DOI:
10.1016/j.procir.2016.04.024.
Coles, LA,
Roy, A, Voronov, L, Semyonov, S, Nikhamkin, M, Silberschmidt, V (2016)
Dynamic fracture in carbon-fibre composites: Effect of steel and ice projectiles. In
Procedia Structural Integrity, pp.366-372, DOI:
10.1016/j.prostr.2016.06.047.
Coles, LA, Tilton, C,
Roy, A, Shukla, A, Silberschmidt, V (2016)
Dynamic fracture in carbon-fibre composites: Air-blast loading. In
Procedia Structural Integrity, pp.417-421, DOI:
10.1016/j.prostr.2016.06.054.
Moles, M,
Roy, A, Silberschmidt, V (2016)
Ultrasonically-assisted polymer molding: an evaluation. In
44th Annual Symposium of the Ultrasonic Industry Association, Washington, DC, USA. DOI:
10.1016/j.phpro.2016.12.011.
Ismail, SO, Dhakal, HN,
Roy, A, Wang, D, Popov, I (2016) Machining of frp composite laminates with cd and uad techniques: A comparative and experimental investigation. In
, Proceedings of the American Society for Composites - 31st Technical Conference, ASC 2016.
Wang, C,
Roy, A, Chen, Z, Silberschmidt, VV (2016) Low-velocity impact behavior modelling of braided textile composites for sports protection. In
, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials,ISBN: 9783000533877.
Coles, LA,
Roy, A, Voronov, L, Bolotov, B, Nikhamkin, M, Silberschmidt, VV (2016) Impact damage in woven carbon fibre/epoxy laminates: Effect of steel and ice projectiles. In
, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials,ISBN: 9783000533877.
Wang, C,
Roy, A, Chen, Z, Silberschmidt, VV (2016) Low-velocity impact behavior modelling of braided textile composites for sports protection. In
, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials.
Coles, LA,
Roy, A, Voronov, L, Bolotov, B, Nikhamkin, M, Silberschmidt, VV (2016) Impact damage in woven carbon fibre/epoxy laminates: Effect of steel and ice projectiles. In
, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials.
Zahedi, SA,
Roy, A, Silberschmidt, V (2015)
Modelling of vibration assisted machining f.c.c single crystal. In
, Karlsruhe, GERMANY, pp.393-398, DOI:
10.1016/j.procir.2015.03.029.
Phadnis, VA, Pandya, KS, Naik, NK,
Roy, A, Silberschmidt, V (2015)
Ballistic damage in hybrid composite laminates. In
, Ghent Univ, Ghent, BELGIUM. DOI:
10.1088/1742-6596/628/1/012092.
Lin, B, Farukh, F, Zhao, L,
Roy, A, Silberschmidt, V (2015)
Modelling of cyclic plasticity and crack-tip deformation in a single crystal nickel-based superalloy. In
Parsons 2015: The 9th International Charles Parsons Turbine and Generator Conference, Loughborough, UK.
Nekouie, V,
Roy, A, Silberschmidt, V (2015)
Indentation study of mechanical behaviour of Zr-Cu-based metallic glass. In
Proceedings of XLIII International Summer SchoolConference APM 2015, Russia, St. Petersburg, pp.291-299.
Phadnis, VA,
Roy, A, Silberschmidt, VV (2015) Modeling hypervelocity-impact response of CFRP-Al/HC laminate. In
, ICCM International Conferences on Composite Materials.
Anoshkin, AN, Lobanov, DS, Matveenko, VP,
Roy, A, Silberschmidt, VV, Tashkinov, MA (2014) The effect of technological defects on performance of fabric-reinforced composites. In
, 16th European Conference on Composite Materials, ECCM 2014.
Silberschmidt, VV, Phadnis, VA,
Roy, A (2014) Impact loading of FRPS - From low to high speeds. In
, 16th European Conference on Composite Materials, ECCM 2014.
Muhammad, R, Demiral, M,
Roy, A, Silberschmidt, VV (2013)
Modelling the dynamic behaviour of hard-to-cut alloys under conditions of vibro-impact cutting. In
, Journal of Physics: Conference Series, pp.012030-012030, DOI:
10.1088/1742-6596/451/1/012030.
Zahedi, SA,
Roy, A, Silberschmidt, VV (2013)
Vibration-assisted machining of single crystal. In
, Journal of Physics: Conference Series, pp.012038-012038, DOI:
10.1088/1742-6596/451/1/012038.
Nekouie, V, Kuehn, U,
Roy, A, Silberschmidt, V (2013)
Quasi-static and dynamic deformation behaviour of Zr-based bulk metallic glass. In
International Symposium on Dynamic Deformation and Fracture of Advanced Materials (D2FAM), INTERNATIONAL SYMPOSIUM ON DYNAMIC DEFORMATION AND FRACTURE OF ADVANCED MATERIALS (D2FAM 2013), Loughborough Univ, Loughborough, ENGLAND. DOI:
10.1088/1742-6596/451/1/012009.
Phadnis, VA, Pandya, KS, Naik, NK,
Roy, A, Silberschmidt, VV (2013)
Ballistic impact behaviour of woven fabric composite: Finite element analysis and experiments. In
International Symposium on Dynamic Deformation and Fracture of Advanced Materials (D2FAM), INTERNATIONAL SYMPOSIUM ON DYNAMIC DEFORMATION AND FRACTURE OF ADVANCED MATERIALS (D2FAM 2013), Loughborough Univ, Loughborough, ENGLAND. DOI:
10.1088/1742-6596/451/1/012019.
Phadnis, VA, Kumar, P, Shukla, A,
Roy, A, Silberschmidt, VV (2013)
Blast response of curved carbon/epoxy composite panels: Experimental study and finite-element analysis. In
International Symposium on Dynamic Deformation and Fracture of Advanced Materials (D2FAM), INTERNATIONAL SYMPOSIUM ON DYNAMIC DEFORMATION AND FRACTURE OF ADVANCED MATERIALS (D2FAM 2013), Loughborough Univ, Loughborough, ENGLAND. DOI:
10.1088/1742-6596/451/1/012018.
Maurotto, A,
Roy, A, Babitsky, V, Silberschmidt, V (2010) Recent developments in ultrasonically assisted machining of advanced alloys. In Aoyama, T and Takeuchi, YE (ed)
Proceedings of the 4th CIRP International Conference on High Performance Cutting (HPC2010), Gifu, Japan, pp.81-84, ISBN: 978-4-915698-03-3.
Demiral, M, Ahmed, N,
Roy, A, Silberschmidt, V (2010) Mechanics of material removal process in ultrasonically assisted cutting: Advanced finite element study. In Aoyama, T and Takeuchi, YE (ed)
Proceedings of the 4th CIRP International Conference on High Performance Cutting (HPC2010), Gifu, Japan, pp.43-48, ISBN: 978-4-915698-03-3.
Demiral, M,
Roy, A, Silberschmidt, V (2010) Advanced numerical study on the ultrasonically-assisted machining. In Pepper, DW and eds, SNA (ed)
Proceedings of International Conference on Computational & Experimental Engineering and Sciences, ICCES'10, Advances in Computational & Experimental Engineering and Sciences, Las Vegas, USA, pp.667-668, ISBN: 978-0-9824205-3-9.
Peerlings, RHJ, Kasyanyuk, Y,
Roy, A, Geers, MGD (2008) Mesoscale modelling of dislocation pile-up based on discrete interactions. In
, Proceedings of 4th International Conference on Multiscale Materials Modeling, MMM 2008, pp.195-198.
Geers, MGD,
Roy, A, Peerlings, RHJ, Kasyanyuk, Y (2007) On short and long range effects in dislocation driven continuum plasticity. In
, Computational Plasticity - Fundamentals and Applications, COMPLAS IX, pp.128-131.
