Journal Articles
Xie, D, Goulas, A, Vaidhyanathan, B, Saremi-Yarahmadi, S (Accepted for publication) Performance of Mg stabilised Na-β’’-alumina solid electrolytes prepared by direct ink writing, Open Ceramics, 20, DOI: 10.1016/j.oceram.2024.100674.
Goulas, A, Chow, TY, Whittaker, T, Reaney, IM, Vaidhyanathan, V, Whittow, W, Engstrom, D (2024)
A low-loss and medium dielectric permittivity SrTiO3/HIPS composite for rapid prototyping of next-generation microwave devices,
Additive Manufacturing, 92(2024), 104390, ISSN: 2214-7810. DOI:
10.1016/j.addma.2024.104390.
Goulas, A, Xie, D, Gibbitz, J, Saremi-Yarahmadi, S, Vaidhyanathan, B (2024)
Digital light processing of sodium-beta-alumina ceramic electrolytes,
Applied Materials Today, 39(August 2024), 102276, ISSN: 2352-9407. DOI:
10.1016/j.apmt.2024.102276.
Tute, RM and
Goulas, A (2024)
Mechanical behaviour of sulphur-based Martian regolith concrete processed under CO2-rich conditions,
Icarus, 417(2024), 116134, ISSN: 0019-1035. DOI:
10.1016/j.icarus.2024.116134.
Goulas, A, Xie, D, Gatzoulis, G, Saremi-Yarahmadi, S, Vaidhyanathan, V (2024)
Rapid manufacture of sodium polyaluminate electrolyte ceramics for solid state batteries via direct ink writing,
Journal of the European Ceramic Society, 44(8), pp.5041-5047, ISSN: 0955-2219. DOI:
10.1016/j.jeurceramsoc.2024.02.049.
Wang, S, Zhou, Z,
Goulas, A, Critchlow, G, Whalley, D, Hutt, D (2023)
The role of self-assembled monolayers in the surface modification and interfacial contact of copper fillers in electrically conductive adhesives,
ACS Applied Materials & Interfaces, 16(1), pp.1846-1860, ISSN: 1944-8244. DOI:
10.1021/acsami.3c14900.
Goulas, A, Whittaker, T, Chi-Tangyie, G, Reaney, I, Engstrom, D, Whittow, W, Vaidhyanathan, B (2023)
Multi-material additive manufacture and microwave-assisted sintering of a metal/ceramic metamaterial antenna structure,
Applied Materials Today, 33, 101878, ISSN: 2352-9407. DOI:
10.1016/j.apmt.2023.101878.
Finlayson, ED, Gallagher, CP, Whittaker, T,
Goulas, A, Engstrøm, DS, Whittow, W, Sambles, JR, Hibbins, AP, Powell, AW (2023)
Microwave backscatter enhancement using radial anisotropy in biomimetic core-shell spheres,
Applied Physics Letters, 122(25), ISSN: 0003-6951. DOI:
10.1063/5.0152735.
Ozkan, B, Sameni, F,
Goulas, A, Karmel, S, Engstrom, D, Sabet, E (2022)
Hot ceramic lithography of silica-based ceramic cores: The effect of process temperature on vat-photopolymierisation,
Additive Manufacturing, 58(2022), 103033, ISSN: 2214-7810. DOI:
10.1016/j.addma.2022.103033.
Goulas, A, McGhee, JR, Whittaker, T, Ossai, D, Mistry, E, Whittow, W, Vaidhyanathan, B, Reaney, IM, Vardaxoglou, JYC, Engstrøm, DS (2022)
Synthesis and dielectric characterisation of a low loss BaSrTiO3/ABS ceramic/polymer composite for fused filament fabrication additive manufacturing,
Additive Manufacturing, 55, pp.102844-102844, ISSN: 2214-8604. DOI:
10.1016/j.addma.2022.102844.
Álvarez, HF, Cadman, DA,
Goulas, A, de Cos Gómez, ME, Engstrøm, DS, Vardaxoglou, JC, Zhang, S (2021)
3D conformal bandpass millimeter-wave frequency selective surface with improved fields of view,
Scientific Reports, 11(1), 12846, DOI:
10.1038/s41598-021-91218-y.
Smith, J, Li, S, Mele, E,
Goulas, A, Engstrom, D, Silberschmidt, V (2021)
Printability and mechanical performance of biomedical PDMS-PEEK composites developed for material extrusion,
Journal of the Mechanical Behavior of Biomedical Materials, 115, 104291, ISSN: 1751-6161. DOI:
10.1016/j.jmbbm.2020.104291.
Goulas, A, Chi-Tangyie, G, Zhang, S, Wang, D, Ketharam, A, Vaidhyanathan, V, Reaney, I, Cadman, D, Whittow, W, Vardaxoglou, JC, Engstrom, D (2020)
Direct ink writing of bismuth molybdate microwave dielectric ceramics,
Ceramics International, 47(6), pp.7625-7631, ISSN: 0272-8842. DOI:
10.1016/j.ceramint.2020.11.102.
Goulas, A, Chi-Tangyie, G, Wang, D, Zhang, S, Ketharam, A, Vaidhyanathan, V, Reaney, I, Cadman, D, Whittow, W, Vardaxoglou, JC, Engstrom, D (2020)
Microstructure and microwave dielectric properties of 3D printed low loss Bi2Mo2O9 ceramics for LTCC applications,
Applied Materials Today, 21, 100862, ISSN: 2352-9407. DOI:
10.1016/j.apmt.2020.100862.
McGhee, J,
Goulas, A, Southee, D, Sagu, J, Engstrom, D, Wang, J, Hutt, D, Evans, P, Zhou, Z, Wijayantha-Kahagala-Gamage, U, Conway, P, Carmalt, C (2020)
Indium tin oxide nanowires manufactured via printing and laser irradiation,
Applied Materials Today, 21, 100835, ISSN: 2352-9407. DOI:
10.1016/j.apmt.2020.100835.
Goulas, A, Chi-Tangyie, G, Wang, D, Zhang, S, Ketharam, A, Vaidhyanathan, V, Reaney, IM, Cadman, D, Whittow, W, Vardaxoglou, JC, Engstrom, D (2020)
Additively manufactured ultra-low sintering temperature, low loss Ag2Mo2O7 ceramic substrates,
Journal of the European Ceramic Society, 41(1), pp.394-401, ISSN: 0955-2219. DOI:
10.1016/j.jeurceramsoc.2020.08.031.
Ma, S, Tang, Q, Han, X, Feng, Q, Song, J, Setchi, R, Liu, Y, Liu, Y,
Goulas, A, Engstrom, D, Tse, Y, Zhen, N (2020)
Manufacturability, mechanical properties, mass-transport properties and biocompatibility of triply periodic minimal surface (TPMS) porous scaffolds fabricated by selective laser melting,
Materials & Design, 195, 109034, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2020.109034.
Goulas, A, Zhang, S, McGhee, J, Cadman, D, Whittow, W, Vardaxoglou, JC, Engstrom, D (2020)
Fused filament fabrication of functionally graded polymer composites with variable relative permittivity for microwave devices,
Materials & Design, 193, 108871, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2020.108871.
Sallstrom, N,
Goulas, A, Martin, S, Engstrom, D (2020)
The effect of print speed and material aging on the mechanical properties of a self-healing nanocomposite hydrogel,
Additive Manufacturing, 35, 101253, ISSN: 2214-8604. DOI:
10.1016/j.addma.2020.101253.
Gheisari, R, Chamberlain, H, Chi-Tangyie, G, Zhang, S,
Goulas, A, Lee, C-K, Whittaker, T, Wang, D, Ketharam, A, Ghosh, A, Vaidhyanathan, V, Whittow, W, Cadman, D, Vardaxoglou, JC, Reaney, IM, Engstrom, D (2020)
Multi-material additive manufacturing of low sintering temperature Bi2Mo2O9 ceramics with Ag floating electrodes by selective laser burnout,
Virtual and Physical Prototyping, 15(2), pp.133-147, ISSN: 1745-2759. DOI:
10.1080/17452759.2019.1708026.
Goulas, A, Zhang, S, Cadman, D, Järveläinen, J, Mylläri, V, Whittow, W, Vardaxoglou, JC, Engstrom, D (2019)
The impact of 3D printing process parameters on the dielectric properties of high permittivity composites,
Designs, 3(47), 50, ISSN: 2411-9660. DOI:
10.3390/designs3040050.
Lee, C-K, McGhee, J, Tsipogiannis, C, Zhang, S, Cadman, D,
Goulas, A, Whittaker, T, Gheisari, R, Engstrom, D, Vardaxoglou, JC, Whittow, W (2019)
Evaluation of microwave characterization methods for additively manufactured materials,
Designs, 3(4), 47, DOI:
10.3390/designs3040047.
Goulas, A, Binner, JGP, Engstrom, D, Harris, RA, Friel, RJ (2019)
Mechanical behaviour of additively manufactured lunar regolith simulant components,
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233(8), pp.1629-1644, ISSN: 1464-4207. DOI:
10.1177/1464420718777932.
Goulas, A, Binner, JGP, Harris, RA, Friel, RJ (2017)
Assessing extraterrestrial regolith material simulants for in-situ resource utilisation based 3D printing,
Applied Materials Today, 6, pp.54-61, ISSN: 2352-9407. DOI:
10.1016/j.apmt.2016.11.004.
Goulas, A and Friel, R (2016)
3D printing with moondust,
Rapid Prototyping Journal, 22(6), pp.864-870, DOI:
10.1108/RPJ-02-2015-0022.
Goulas, A, Harris, R, Friel, RJ (2016)
Additive manufacturing of physical assets by using ceramic multicomponent extra-terrestrial materials,
Additive Manufacturing, 10, pp.36-42, DOI:
10.1016/j.addma.2016.02.002.
Conferences
Goulas, A, Whittaker, T, Whittow, W (2022)
Fused filament fabrication additive manufacturing and characterisation at Loughborough University for RF applications. In
2022 16th European Conference on Antennas and Propagation (EuCAP), Madrid, Spain.
Zhang, S, Cadman, D, Whittow, W, Wang, D, Chi-Tangyie, G, Ghosh, A, Ketharam, A,
Goulas, A, Reaney, I, Vaidhyanathan, B, Engstrom, D, Vardaxoglou, JC (2019)
3D Antennas, Metamaterials, and Additive Manufacturing. In
2019 IEEE MTT-S International Wireless Symposium (IWS), 2019 IEEE MTT-S International Wireless Symposium, IWS 2019 - Proceedings, Guangzhou, China, China,ISBN: 9781728107165. DOI:
10.1109/IEEE-IWS.2019.8803909.
Goulas, A, Engstrom, D, Friel, R (Accepted for publication) Laser Additive Manufacturing Using Indigenous Lunar Resources. In 7th European Lunar Symposium, Manchester.
Goulas, A, Gheisari, R, Ghosh, A, Wang, D, Vaidhyanathan, V, Reaney, IM, Vardaxoglou, JC, Engstrom, D (2018)
Additive manufacturing of metal/ceramic metamaterial structures for RF applications [Abstract]. In
, Boston, Massachusetts.
Engstrom, D,
Goulas, A, Gheisari, R, Cadman, D, Zhang, S, Wang, D, Reaney, IM, Vaidhyanathan, V, Whittow, W, Vardaxoglou, JC, Conway, P (2018)
Additive manufacturing of metal-ceramic metamaterials for RF communications. In
2nd International Conference on 3D Printing Technology and Innovations, London, United Kingdom. DOI:
10.4172/0976-4860-C1-002.
Cadman, D, El-Faouri, S, Wang, D, Chi-Tangyie, G, Ghosh, A, Ketharam, A, Gheisari, R,
Goulas, A, Lee, C, Whittaker, T, Zhang, S, Reaney, IM, Vaidhyanathan, V, Conway, P, Engstrom, D, Whittow, W, Vardaxoglou, JC (2018)
3D printing of high performance low temperature sintered ceramic substrates for microwave applications. In
Loughborough Antennas & Propagation Conference 2018 (LAPC 2018), Loughborough, United Kingdom.
Goulas, A, Engstrom, D, Friel, RJ, Harris, RA (2016)
Investigating the additive manufacture of extra-terrestrial materials. In
2016 Solid Freeform Fabrication Symposium Proceedings (SFF Symp 2016), Austin, TX.
