Journal Articles
Stone, B, Mitchell, S, Miyazaki, Y, Peirce, N,
Harland, A (2023)
A destructible headform for the assessment of sports impacts,
Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 237(1), pp.7-18, ISSN: 1754-3371. DOI:
10.1177/17543371211055905.
Edwards, T, Kay, GA, Aljayyoussi, G, Owen, SI,
Harland, AR, Pierce, NS, Calder, JDF, Fletcher, TE, Adams, ER (2022)
SARS-CoV-2 viability on sports equipment is limited, and dependent on material composition,
Scientific Reports, 12(1), DOI:
10.1038/s41598-022-05515-1.
Xie, B, Meng, J, Li, B,
Harland, A (2022)
Biosignal-based transferable attention Bi-ConvGRU deep network for hand-gesture recognition towards online upper-limb prosthesis control,
Computer Methods and Programs in Biomedicine, 224(2022), 106999, ISSN: 0169-2607. DOI:
10.1016/j.cmpb.2022.106999.
England, R, Peirce, N, Torresi, J, Mitchell, S,
Harland, A (2021)
Erratum: Correction: The Potential for Transmission of Coronaviruses via Sports Equipment; A Cricket Case Study (International journal of sports medicine (2021) 42 12 (1058-1069),
International journal of sports medicine, 42(14), e7, DOI:
10.1055/a-1560-4870.
England, R, Peirce, N, Torresi, J, Mitchell, S,
Harland, A (2021)
The potential for transmission of Coronaviruses via sports equipment; A cricket case study,
International Journal of Sports Medicine, 42(12), pp.1058-1069, ISSN: 0172-4622. DOI:
10.1055/a-1500-4620.
England, R, Peirce, N, Wedatilake, T, Torresi, J, Kemp, S, Cook, M, Mitchell, S,
Harland, A (2021)
The potential for airborne transmission of SARS-CoV-2 in sport: a cricket case study,
International Journal of Sports Medicine, 42(5), pp.407-418, ISSN: 0172-4622. DOI:
10.1055/a-1342-8071.
Roberts, J, Osei-Owusu, P, Mears, A,
Harland, A (2019)
Elite players’ perceptions of football playing surfaces: A qualitative study,
Research Quarterly for Exercise and Sport, 91(2), pp.239-251, ISSN: 0270-1367. DOI:
10.1080/02701367.2019.1660757.
Blenkinsopp, R, Roberts, J,
Harland, A, Sherratt, P, Smith, P, Lucas, T (2019)
A method for calibrating a digital image correlation system for full-field strain measurements during large deformations,
Applied Sciences, 9(14), 2828, DOI:
10.3390/app9142828.
Peploe, C, McErlain-Naylor, SA,
Harland, A, King, M (2018)
Relationships between technique and bat speed, post-impact ball speed, and carry distance during a range hitting task in cricket,
Human Movement Science, 63, pp.34-44, ISSN: 0167-9457. DOI:
10.1016/j.humov.2018.11.004.
Mears, A, Osei-Owusu, P,
Harland, A, Owen, A, Roberts, J (2018)
Perceived links between playing surfaces and injury: A worldwide study of elite association football players,
Sports Medicine - Open, 4(40), ISSN: 2198-9761. DOI:
10.1186/s40798-018-0155-y.
Ward, M, Passmore, M, Spencer, A, Tuplin, S,
Harland, A (2018)
Characterisation of football trajectories for assessing flight performance,
Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, ISSN: 1754-3371. DOI:
10.1177/1754337118774414.
Lane, B, Sherratt, P, Hu, X,
Harland, A (2018)
Measurement of strain and strain rate during the impact of tennis ball cores,
Applied Sciences (Bucureşti), 8(3), ISSN: 1454-5101. DOI:
10.3390/app8030371.
Peploe, C, McErlain-Naylor, SA,
Harland, A, King, M (2017)
The relationships between impact location and post-impact ball speed, bat torsion, and ball direction in cricket batting,
Journal of Sports Sciences, 36(12), ISSN: 0264-0414. DOI:
10.1080/02640414.2017.1389484.
Peploe, C, McErlain-Naylor, SA,
Harland, A, Yeadon, F, King, M (2017)
A curve fitting methodology to determine impact location, timing, and instantaneous post-impact ball velocity in cricket batting,
Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, ISSN: 1754-3371. DOI:
10.1177/1754337117723275.
Stone, BW,
Harland, A, Jones, JP, Mitchell, S, Sherratt, P, Ranson, CA, Halkon, B (2017)
On the dynamic response of an instrumented headform for alternative mounting stiffnesses when subjected to ballistic impacts,
Proceedings of the IMechE Part P: Journal of Sports Engineering and Technology, 231(4), pp.324-335, ISSN: 1754-3371. DOI:
10.1177/1754337117703574.
Meyer, T,
Harland, A, Haworth, B, Holmes, CE, Lucas, T, Sherratt, P (2017)
The influence of different melt temperatures on the mechanical properties of injection moulded PA-12 and the post process detection by thermal analysis,
International Polymer Processing, 32(1), ISSN: 0930-777X. DOI:
10.3139/217.3288.
Lane, B, Sherratt, P, Hu, X,
Harland, A (2017)
Characterisation of ball degradation events in professional tennis,
Sports Engineering, ISSN: 1369-7072. DOI:
10.1007/s12283-017-0228-z.
Hannah, I,
Harland, A, Price, D, Schlarb, H, Lucas, T (2016)
Evaluation of a kinematically-driven finite element footstrike model,
Journal of Applied Biomechanics, 32(3), pp.301-305, ISSN: 1065-8483. DOI:
10.1123/jab.2015-0002.
Owen, A, Mears, A, Osei-Owusu, P,
Harland, A, Roberts, J (2016)
Elite players’ perceptions of football playing surfaces: a mixed effects ordinal logistic regression model of players’ perceptions,
Journal of Applied Statistics, pp.1-17, ISSN: 0266-4763. DOI:
10.1080/02664763.2016.1177500.
Ullah, H,
Harland, A, Silberschmidt, V (2015)
Characterisation of mechanical behaviour and damage analysis of 2D woven composites under bending,
Composites Part B: Engineering, 75, pp.156-166, ISSN: 1359-8368. DOI:
10.1016/j.compositesb.2015.01.036.
Ullah, H,
Harland, A, Silberschmidt, V (2015)
Dynamic bending behaviour of woven composites for sports products: experiments and damage analysis,
Materials and Design, 88, pp.149-156, ISSN: 0264-1275. DOI:
10.1016/j.matdes.2015.08.147.
Lane, B, Sherratt, P, Hu, X,
Harland, A (2015)
Characterisation of ball impact conditions in professional tennis: matches played on hard court,
Proc IMechE Part P: J Sports Engineering and Technology, ISSN: 1754-3371. DOI:
10.1177/1754337115617580.
Ullah, H,
Harland, AR, Silberschmidt, VV (2014)
Evolution and interaction of damage modes in fabric-reinforced composites under dynamic flexural loading,
Composites Science and Technology, 92, pp.55-63, ISSN: 0266-3538. DOI:
10.1016/j.compscitech.2013.12.007.
Ullah, H,
Harland, AR, Silberschmidt, VV (2013)
Damage and fracture in carbon fabric reinforced composites under impact bending,
Composite Structures, 101, pp.144-156, ISSN: 0263-8223. DOI:
10.1016/j.compstruct.2013.02.001.
Ullah, H,
Harland, AR, Silberschmidt, VV (2012)
Damage in woven CFRP laminates under impact loading,
EPJ Web of Conferences, 26, ISSN: 2101-6275. DOI:
10.1051/epjconf/20122604004.
Hanson, H,
Harland, A, Holmes, C, Price, D, Lucas, T (2012)
Modelling local dynamic pressure within inflatable sports balls,
ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012, 1, pp.29-35, DOI:
10.1115/ESDA2012-82437.
Passmore, M, Rogers, D, Tuplin, S,
Harland, A, Lucas, T, Holmes, C (2012)
The aerodynamic performance of a range of FIFA-approved footballs,
Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 226(1), pp.61-70, ISSN: 1754-3371. DOI:
10.1177/1754337111415768.
Ullah, H,
Harland, AR, Lucas, T, Price, D, Silberschmidt, VV (2012)
Finite-element modelling of bending of CFRP laminates: Multiple delaminations,
Computational Materials Science, 52(1), pp.147-156, ISSN: 0927-0256. DOI:
10.1016/j.commatsci.2011.02.005.
Velani, N, Wilson, O, Halkon, BJ,
Harland, AR (2012)
Measuring the risk of sustaining injury in sport a novel approach to aid the re-design of personal protective equipment,
Applied Ergonomics, 43(5), pp.883-890, ISSN: 0003-6870. DOI:
10.1016/j.apergo.2011.12.010.
Ullah, H,
Harland, AR, Silberschmidt, VV (2012) Damage modelling in woven-fabric CFRP laminates under large-deflection bending,
Computational Materials Science, ISSN: 0927-0256.
Passmore, MA, Tuplin, S, Rogers, D,
Harland, A, Lucas, T, Holmes, C (2012)
The application of simulation to the understanding of football flight,
Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 226, pp.134-142.
Velani, N, Wilson, O, Halkon, BJ,
Harland, AR (2012) Measuring the risk of sustaining injury in sport a novel approach to aid the re-design of personal protective equipment,
Applied Ergonomics, ISSN: 0003-6870.
Ullah, H,
Harland, AR, Blenkinsopp, R, Lucas, T, Price, D, Silberschmidt, VV (2011)
Analysis of nonlinear shear deformations in CFRP and GFRP textile laminates,
Applied Mechanics and Materials, 70, pp.363-368, ISSN: 1660-9336. DOI:
10.4028/www.scientific.net/AMM.70.363.
Ullah, H,
Harland, AR, Lucas, T, Price, D, Silberschmidt, VV (2011)
Analysis of nonlinear deformations and damage in CFRP textile laminates,
Journal of Physics: Conference Series, 305(1), ISSN: 1742-6588. DOI:
10.1088/1742-6596/305/1/012045.
Ullah, H,
Harland, AR, Silberschmidt, VV (2011) Experimental and Numerical Analysis of Damage in Woven GFRP Composites Under Large-deflection Bending,
Applied Composite Materials, pp.1-15, ISSN: 0929-189X.
Hannah, I,
Harland, A, Price, D, Lucas, T (2011)
Developing a three-dimensional finite element model of a dynamic footstrike,
Footwear Science, 3(SUPPL.1), ISSN: 1942-4280. DOI:
10.1080/19424280.2011.575827.
Ronkainen, JA and
Harland, AR (2010)
Laser Tracking System for Sports Ball Trajectory Measurement,
Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 224(3), pp.221-228, ISSN: 1754-3371. DOI:
10.1243/17543371JSET67.
Walker, PJ, Rothberg, SJ, Holmes, CE,
Harland, AR (2010)
Design of a force acquisition system for high-energy short-duration impacts,
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART P-JOURNAL OF SPORTS ENGINEERING AND TECHNOLOGY, 224(P2), pp.129-139, ISSN: 1754-3371. DOI:
10.1243/17543371JSET65.
Tarrier, J,
Harland, A, Jones, R, Lucas, T, Price, D (2010)
Applying finite element analysis to compression garment development,
Procedia Engineering, 2(2), pp.3349-3354, DOI:
10.1016/j.proeng.2010.04.156.
Price, DS,
Harland, AR, Jones, R, Silberschmidt, V (2008)
Viscoelasticity of multi-layer textile reinforced polymer composites used in soccer balls,
Journal of Materials Science, 43(8), pp.2833-2843, ISSN: 0022-2461. DOI:
10.1007/s10853-008-2526-0.
Harland, AR, Petzing, JN, Tyrer, JR (2007)
Visualising scattering underwater acoustic fields using laser Doppler vibrometry,
Journal of Sound & Vibration, 305, pp.659-671, ISSN: 0022-460X.
Ronkainen, JA and
Harland, AR (2007) Soccer Ball modal analysis using a scanning laser Doppler vibrometer,
Sports Engineering, 10(1), pp.49-54.
Price, DS,
Harland, AR, Jones, R (2007) Advanced Finite Element Modelling of a 32-Panel Soccer Ball,
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221, pp.1309-1319.
Mara, GE,
Harland, AR, Mitchell, SR (2006)
Virtual modelling of a prosthetic foot to improve footwear testing,
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220(4), pp.207-213, ISSN: 1464-4207. DOI:
10.1243/14644207JMDA82.
Price, DS, Jones, R,
Harland, AR (2006)
Computational modelling of manually stitched soccer balls,
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 220(4), pp.259-268, ISSN: 1464-4207. DOI:
10.1243/14644207JMDA83.
Price, DS, Jones, R,
Harland, AR (2006)
Soccer Ball Anisotropy Modelling,
Materials Science and Engineering A, Structural Materials: Properties, Microstructure and Processing, 420(1-2), pp.100-108, ISSN: 0921-5093. DOI:
10.1016/j.msea.2006.01.079.
Price, DS, Neilson, P,
Harland, AR, Jones, R (2005)
Measurement of out of balance in hollow spheres using flotation dynamics: soccer ball application,
Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 219(2), pp.159-167, ISSN: 0954-4062. DOI:
10.1243/095440605X8487.
Harland, AR, Petzing, JN, Tyrer, JR (2004)
Nonperturbing Measurements of Spatially Distributed Underwater Acoustic Fields Using a Scanning Laser Doppler Vibrometer,
Journal of the Acoustical Society of America, 115(1), pp.187-195, ISSN: 0001-4966. DOI:
10.1121/1.1635841.
Harland, AR, Petzing, JN, Tyrer, JR, Bickley, CJ, Robinson, SJ, Preston, RC (2003)
Application and Assessment of Laser Doppler Velocimetry for Underwater Acoustic Measurements,
Journal of Sound and Vibration, 265(3), pp.627-645, ISSN: 0022-460X. DOI:
10.1016/S0022-460X(02)01460-8.
Harland, AR, Petzing, JN, Tyrer, JR (2002)
Non-Invasive Measurements of Underwater Pressure Fields Using Laser Doppler Velocimetry,
Journal of Sound and Vibration, 252(1), pp.169-177, ISSN: 1095-8568. DOI:
10.1006/jsvi.2001.3926.
Conferences
Xie, B, Meng, J, Li, B,
Harland, A (2020)
Gesture recognition from bio-signals using hybrid deep neural networks. In
2020 IEEE International Conference on Artificial Intelligence and Computer Applications (ICAICA); 2020 IEEE International Conference on Artificial Intelligence and Computer Applications (ICAICA), Dalian, China, pp.493-499, ISBN: 9781728170053. DOI:
10.1109/icaica50127.2020.9182510.
Dias, P, Mitchell, S,
Harland, A (2020)
Novel experimental protocol to capture movement data and predict shot execution in cricket batting. In
13th Conference of the International Sports Engineering Association; Proceedings 2020, Tokyo, Japan [Online]. DOI:
10.3390/proceedings2020049041.
Lee, J,
Harland, A, Roberts, J (2020)
Non-parametric shape optimization of a football boot bottom plate. In
13th Conference of the International Sports Engineering Association; Proceedings 2020, Tokyo, Japan [Online]. DOI:
10.3390/proceedings2020049152.
Ward, M, Passmore, M, Spencer, A,
Harland, A, Hanson, H, Lucas, T (2020)
Comparing the aerodynamic behaviour of real footballs to a smooth sphere using tomographic PIV. In Miyazaki, MNTMAY (ed)
13th conference of the International Sports Engineering Association (ISEA 2020); Proceedings, Online. DOI:
10.3390/proceedings2020049150.
Xie, B, Li, B,
Harland, A (2018)
Movement and gesture recognition using deep learning and wearable-sensor technology. In
International Conference on Artificial Intelligence and Pattern Recognition, Beijing,ISBN: 9781450365246. DOI:
10.1145/3268866.3268890.
Meyer, T, Sherratt, P,
Harland, A, Haworth, B, Holmes, CE, Lucas, T (2017)
Processing of in-plant mechanically recycled PA-12. In
ANTEC, Anaheim.
Flowers, J, Liu, C, Mitchell, S,
Harland, A, Esliger, D (2016)
Conductive microfluidic interconnects to enable scalable 3D manufacturing of wearable electronics. In
ECTC: IEEE Electronic Components and Technology Conference, Las Vegas, Nevada USA,ISBN: 9781509012053. DOI:
10.1109/ECTC.2016.24.
Meyer, T, Sherratt, P,
Harland, A, Haworth, B, Holmes, CE, Lucas, T (2016)
Injection moulding: properties customization by varying process conditions. In
14th International Conference on Manufacturing Research, Loughborough.
Meyer, T, Haworth, B,
Harland, A, Sherratt, P, Lucas, T, Holmes, CE (2016)
Complex injection moulded components - Bridging the knowledge gap. In
32nd International Conference of the Polymer Processing Society, Lyon, France,ISBN: 9780735416062.
Thompsett, B,
Harland, A, Roberts, J (2016)
Investigating the Relationship between Physical Properties of a Football and Player Perceptions. In
, Procedia Engineering, pp.519-525, DOI:
10.1016/j.proeng.2016.06.231.
Stone, B, Halkon, B,
Harland, A (2016)
Headform Mounting Performance in Cricket Standard Testing. In
, Procedia Engineering, pp.401-406, DOI:
10.1016/j.proeng.2016.06.327.
Stone, BW, Halkon, BJ,
Harland, AR (2016) An explorative study into the mechanics of projectile impacts to the head. In
, 2016 IRCOBI Conference Proceedings - International Research Council on the Biomechanics of Injury, pp.369-380.
Ullah, H,
Harland, AR, Silberschmidt, VV (2014)
Damage analysis of carbon fabric-reinforced composites under dynamic bending. In
, Proceedings of 2014 11th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2014, pp.5-11, DOI:
10.1109/IBCAST.2014.6778112.
Roberts, J, Osei-Owusu, P,
Harland, A, Owen, A, Smith, A (2014)
Elite Football Players’ Perceptions of Football Turf and Natural Grass Surface Properties. In
, Procedia Engineering, pp.907-912, DOI:
10.1016/j.proeng.2014.06.150.
Fraser, S,
Harland, A, Smith, P, Lucas, T (2014)
A study of football footwear bending stiffness. In
, Procedia Engineering, pp.315-320, DOI:
10.1016/j.proeng.2014.06.047.
Peploe, C, King, M,
Harland, A (2014)
The effects of different delivery methods on the movement kinematics of elite cricket batsmen in repeated front foot drives. In
, ENGINEERING OF SPORT 10, Sheffield Hallam Univ, Sheffield, ENGLAND, pp.220-225, DOI:
10.1016/j.proeng.2014.06.039.
Owen, AJ, Roberts, J,
harland, A, osei-owusu, P, smith, A (2013) The Application of Statistical Modelling to Elite Players' Perceptions of Football Playing Surfaces. In
Fourth International Conference on Mathematics in Sport, Proceedings of the Fourth International Conference on Mathematics in Sport (D. Goosens, F. Speiksma & P. A. Scarf eds.), Leven: MathSport International, 2013, Leuven, pp.233-243.
Ullah, H,
Harland, AR, Silberschmidt, VV, IOP, (2013)
Damage and fracture in fabric-reinforced composites under quasi-static and dynamic bending. In
, INTERNATIONAL SYMPOSIUM ON DYNAMIC DEFORMATION AND FRACTURE OF ADVANCED MATERIALS (D2FAM 2013). DOI:
10.1088/1742-6596/451/1/012020.
Ullah, H,
Harland, AR, Silberschmidt, VV (2013)
Deformation and Damage in Fabric-reinforced Composites Under Bending. In
, 9TH INTERNATIONAL CONFERENCE ON COMPOSITE SCIENCE AND TECHNOLOGY: 2020 - SCIENTIFIC AND INDUSTRIAL CHALLENGES, pp.974-975.
Velani, N,
Harland, AR, Halkon, BJ (2013) The development of a test methodology for the determination of cricket batting helmet performance when subjected to ballistic impacts. In
, 2013 IRCOBI Conference Proceedings - International Research Council on the Biomechanics of Injury, pp.424-430.
Ullah, H,
Harland, AR, Silberschmidt, VV (2013) Experimental analysis of damage in fabric-reinforced composites subjected to low-velocity impacts. In
, ICCM International Conferences on Composite Materials, pp.7700-7707.
Ullah, H, Abdel-Wahab, AA,
Harland, AR, Silberschmidt, VV (2012)
Damage in woven CFRP laminates subjected to low velocity impacts. In
Conference on Modern Practice in Stress and Vibration Analysis (MPSVA), MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS 2012 (MPSVA 2012), Univ Glasgow, Glasgow, SCOTLAND. DOI:
10.1088/1742-6596/382/1/012015.
Jones, JA, Leaney, PG,
Harland, AR, Forrester, SE (2012)
Validation of RoboGuide to Support the Emulation of Sporting Movements using an Industrial Robot. In
, Procedia Engineering, pp.307 - 312-307 - 312, DOI:
10.1016/j.proeng.2012.04.053.
Hannah, I,
Harland, A, Price, D, Lucas, T (2012)
Centre of pressure output in a kinematically driven finite element footstrike model. In
, ENGINEERING OF SPORT CONFERENCE 2012, pp.278-283, DOI:
10.1016/j.proeng.2012.04.048.
Hanson, H,
Harland, A, Holmes, C, Lucas, T (2012)
Method for understanding football ball motions using video-based notational analysis. In
, ENGINEERING OF SPORT CONFERENCE 2012, pp.164-169, DOI:
10.1016/j.proeng.2012.04.029.
Blenkinsopp, R,
Harland, A, Price, D, Lucas, T, Roberts, J (2012)
A Method to Measure Dynamic Dorsal Foot Surface Shape and Deformation During Linear Running Using Digital Image Correlation. In
, ENGINEERING OF SPORT CONFERENCE 2012, pp.266-271, DOI:
10.1016/j.proeng.2012.04.046.
Hanson, H and
Harland, A (2012)
The 16th century football: 450 year old sports technology assessed by modern standards. In
, ENGINEERING OF SPORT CONFERENCE 2012, pp.373-378, DOI:
10.1016/j.proeng.2012.04.064.
Fraser, S,
Harland, A, Donovan, P, O'Shea, L (2012)
Development of an end-effector to simulate the foot to ball interaction of an instep kick in soccer. In
, ENGINEERING OF SPORT CONFERENCE 2012, pp.284-289, DOI:
10.1016/j.proeng.2012.04.049.
Ronkainen, J, Osei-Owusu, P, Webster, J,
Harland, A, Roberts, J (2012)
Elite player assessment of playing surfaces for football. In Drane, P and Sherwood, J (ed)
9th Conference of the International-Sports-Engineering-Association (ISEA), ENGINEERING OF SPORT CONFERENCE 2012, Univ Massachusetts Lowell, Lowell, MA, pp.837-842, DOI:
10.1016/j.proeng.2012.04.143.
Rodgers, D, Passmore, MA,
Harland, A, Jones, R, Holme, C, Lucas, T (2010) An Experimental Validation Method of Wind Tunnel Measurements on FIFA Approved Footballs Using Kicking Tests in Wind-free Conditions. In
8th Conference of the International Sports Engineering Association (ISEA), Vienna, Austria, pp.2481-2486.
Sissler, L, Jones, R, Leaney, PGJ,
Harland, AR (2010)
Viscoelastic Modelling of Tennis Ball Properties. In
9th World Congress on Computational Mechanics, IOP Conference Series: Materials Science and Engineering, Sydney, Australia, 9Paper 012114, DOI:
10.1088/1757-899X/10/1/012114.
Harland, AR and Tarrier, J (2010) Applying finite element analysis to compression garment developmentProcedia Engineering. In
The Engineering of Sport 8 - Engineering Emotion, Procedia Engineering, Vienna, pp.3349-3354.
Harland, AR, Price, DS, Silberschmidt, VV, Jones, R (2008) Viscoelasticity of Multi-layer Materials Systems used in Soccer Balls. In Schrefler, BA and Perego, U (ed)
5th European Congress on Computational Methods in Applied Sciences and Engineering, Venice, Italy.
Harland, AR, Ronkainen, J, Holmes, CE, Jones, R (2008)
A comparative study of ball launch measurement systems; soccer case study. In Estivalet, M and Brisson, P (ed)
The Engineering of Sport, 7, Biarritz, France, pp.239-246, DOI:
10.1007/978-2-287-99054-0_29.
Cowie, JI, Flint, JA,
Harland, AR (2008)
Wireless impact measurement for martial arts. In Estivalet, M and Brisson, P (ed)
ISEA 2008 Conference on Engineering of Sport 7, ENGINEERING OF SPORT 7, VOL 1, Biarritz, FRANCE, pp.231-237, ISBN: 978-2-287-09410-1. DOI:
10.1007/978-2-287-09411-8_28.
Roberts, JR, Neilson, P,
Harland, AR, Jones, R (2007) Player perceptions of soccer ball performance. In
6th World Congress of Science and Football, Journal of Sports Science and Medicine, 6 (Suppl 10), Antalya, Turkey, pp.51-52.
Price, DS,
Harland, AR, Jones, R (2007) Soccer Ball Dynamic Force Measurement. In
Proceedings of the 6th World Congress of Science and Football (Abstracts), Antalya, Turkey, pp.48-49.
Holmes, CE, Jones, R,
Harland, AR (2007) Development of a mechanical kicking simulator. In
Proceedings of the 6th World Congress of Science and Football (Abstracts), Antalya, Turkey, pp.44-45.
Cotton, RT, Jones, R,
Harland, AR, Hawkings, PJ (2007) Development of a friction tester for soccer materials. In
Proceedings of the 6th World Congress of Science and Football (Abstracts), Antalya, Turkey, p.47.
Price, DS,
Harland, AR, Jones, R (2006) The Dependency of Hollow Ball Deformation on Material Properties. In
Proceedings of the 2006 Abaqus Users Conference, Rhode Island: Abaqus INC, USA, pp.389-403.
Price, DS,
Harland, AR, Jones, R (2006) The Dependency of Hollow Ball Deformation on Material Properties. In
Proceedings of the 2006 Abaqus Users Conference, Rhode Island, USA, pp.389-403.
Gibbs, PJ, Mitchell, SR,
Harland, AR (2006) The use of Stereoscopy and High-Speed Video for the Measurement of Quasi-Static and Dynamic Shoe Loading Scenarios. In Moritz, EF and Haake, S (ed)
Proceedings of the International Conference on the Engineering of Sport, The Engineering of Sport 6, Volume 3: Developments for Innovation, Munich, Germany, pp.409-414, ISBN: 0-387-34680-5.
Justham, L, West, AA,
Harland, AR, Cork, A (2006) Quantification of the Cricket Bowling Delivery; a Study of Elite Players to Gauge Variability and Controllability. In Moritz, EF and eds, SH (ed)
Proceedings of the 6th International Conference on the Engineering of Sport 6, The Engineering of Sports 6, Volume 1: Developments for Sports, Munich, Germany, pp.205-210, ISBN: 0-387-31773-2.
Holmes, C, Jones, R,
Harland, AR, Petzing, JN (2006) Ball Launch Characteristics for Elite Rugby Union Players. In Moritz, EF and eds, SH (ed)
Proceedings of the 6th International Conference on the Engineering of Sport 6, The Engineering of Sport 6, Volume 1: Developments for Sports, Munich, Germany, pp.211-216, ISBN: 0-387-31773-2.
Ronkainen, JA and
Harland, AR (2006) Soccer Ball Modal Analysis Using a Scanning Laser Doppler Vibbrometer (SLDV). In Moritz, EF and eds, SH (ed)
Proceedings of the 6th International Conference on the Engineering of Sport 6, The Engineering of Sport 6, Volume 1: Developments for Sports, Munich, Germany, pp.357-362, ISBN: 0-387-31773-2.
Justham, L, West, AA, Jones, R,
Harland, AR, Harrison, R (2005) The use of virtual reality and automatic training devices in cricket. In Subic, A and eds, SU (ed)
Proceedings of the Asia-Pacific Congress on Sports Technology, The Impact of Technology on Sport, Tokyo Institute of Technology, pp.39-44, ISBN: 0-646-45025-5.
Price, DS,
Harland, AR, Jones, R (2005) Computational modelling of out of balance forces in hollow spheres: the soccer ball application. In Subic, A and eds, SU (ed)
Proceedings of the Asia-Pacific Congress on Sports Technology, The Impact of Technology on Sport, Tokyo Institute of Technology, pp.452-458, ISBN: 0-646-45025-5.
Mara, GE,
Harland, AR, Mitchell, SR (2005) Using virtual tests to improve footwear design development. In Subic, A and eds, SU (ed)
Proceedings of the Asia-Pacific Congress on Sports Technology, The Impact of Technology on Sport, Tokyo Institute of Technology, pp.86-91, ISBN: 0-646-45025-5.
Price, DS,
Harland, AR, Jones, R (2005) Soccer Ball Anisotropy Modelling. In
Abstract presented at Euromech Colloquium 466, Computational and Experimental Mechanics of Advanced Materials 2005, Loughborough, UK.
Justham, L, West, AA, Harrison, R, Jones, R,
Harland, AR, Caine, MP, Roberts, JR (2004) The use of virtual reality and automatic training devices in sport: a review of technology within cricket and related disciplines. In
Proceedings of the 7th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA04, Manchester, UK, p.8.
Justham, L, West, AA, Harrison, R, Jones, R,
Harland, AR (2004) The use of virtual reality and automatic training devices in sport: a review of technology within cricket and related disciplines. In
Proceedings of the 7th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA04, Manchester, UK, p.8.
Price, DS, Neilson, P,
Harland, AR, Jones, R (2003) Measurement of Out of Balance Forces in Soccer Balls. In Reilly, T, Cabri, J, eds, DA (ed)
Proceedings of the 5th World Congress of Science and Football, Lisbon, Portugal, pp.15-20.
Harland, AR, Petzing, JN, Tyrer, JR (2003) Non-perturbing Measurements of Underwater Acoustic Tone Bursts Using Scanning Laser Doppler Velocimetry. In
Proceedings of the Institute of Acoustics - Calibration and Measurement in Underwater Acoustics Conference, London, UK, p.8, ISBN: 1-901656-52-7.
Harland, AR, Petzing, JN, Tyrer, JR (2002) Assessment and Application of LDV to Underwater Acoustic Measurements. In
Proceedings of Photon '02 - Applied Optics and Optoelectronics Conference, Cardiff, UK, pp.47-48, ISBN: 0-7503-0916-4.
Harland, AR, Petzing, JN, Tyrer, JR (2001) Underwater Pressure Field Measurements Using Non-Perturbing Optical Metrology Techniques. In
Proceedings of the National Measurement Conference 2001, NMC 2001 & BEMC 2001, Harrogate, UK.
