Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Research Publications


Publications for Keith Case

From (year): To (year):

Download all publications as Word document


Journal Articles

Md Yusop, MS, Mat, S, Ramli, FR, Dullah, AR, Khalil, SN, Case, K (2018) Design of welding armrest based on ergonomics analysis: Case study at educational institution In Johor Bahru, Malaysia, ARPN Journal of Engineering and Applied Sciences, 13(1), pp.309-313.

Mat, S, Case, K, Mohamaddan, S, Goh, YM (2017) A study of motivation and learning in Malaysian manufacturing industry, Production and Manufacturing Research, 5(1), pp.284-305, ISSN: 2169-3277. DOI: 10.1080/21693277.2017.1374892.

Mohamaddan, S, Fu, CS, Rasit, AH, Md Dawal, SZ, Case, K (Accepted for publication) Development of adjustable foot corrective device for clubfoot treatment, Pertanika Journal of Science & Technology, 25(S), pp.251-258, ISSN: 0128-7680.

Brolin, A, Thorvald, P, Case, K (2017) Experimental study of cognitive aspects affecting human performance in manual assembly, Production and Manufacturing Research, 5(1), pp.141-163, ISSN: 2169-3277. DOI: 10.1080/21693277.2017.1374893.

Osman Zahid, MN, Case, K, Watts, D (2017) Rapid process planning in CNC machining for rapid manufacturing applications, International Journal of Mechanical Engineering and Robotics Research, 6(2), pp.118-121, ISSN: 2278-0149. DOI: 10.18178/ijmerr.6.2.118-121.

Mohamaddan, S, Hong, TS, Shazali, STS, Case, K (2017) Development of a virtual reality platform as a training tool using gaming software, Journal of Telecommunication, Electronic and Computer Engineering, 9(3-10), pp.53-57, ISSN: 2180-1843.

123. Mohamaddan, S and Case, K (2016) Crowd simulation: A video observation and agent-based modelling approach, International Journal of the Digital Human, 1(3), pp.229-247, ISSN: 2046-3375. DOI: 10.1504/IJDH.2016.10000735.

Marshall, R, Summerskill, S, Case, K, Hussain, A, Gyi, D, Sims, R, Morris, A, Barnes, J (2016) Supporting a Design Driven Approach to Social Inclusion and Accessibility in Transport, Social Inclusion, 4(3), ISSN: 2183-2803. DOI: 10.17645/si.v4i3.521.

Case, K, Marshall, R, Summerskill, SJ (2016) Digital human modelling over four decades, International Journal of the Digital Human, 1(2), pp.112-130, DOI: 10.1504/IJDH.2016.077408.

Case, K, Hussain, A, Marshall, R, Summerskill, SJ (2016) Using ergonomic risk assessment methods for designing inclusive work practices – a case study, Human Factors in Manufacturing & Service Industries, 26(3), pp.337-355, DOI: 10.1002/hfm.20650.

Lee, MJ, Case, K, Marshall, R (2016) Product lifecycle optimisation of car climate controls using analytical hierarchical process (AHP) analysis and a multi-objective grouping genetic algorithm (MOGGA), Journal of Engineering Science and Technology, 11(1), pp.1-17, ISSN: 1823-4690.

Hussain, A, Case, K, Marshall, R, Summerskill, SJ (2015) Joint mobility and inclusive design challenges, International Journal of Industrial Ergonomics, 53, pp.67-79, ISSN: 1872-8219. DOI: 10.1016/j.ergon.2015.10.001.

Rifai, AP, Case, K, Siti Zawiah, MD, Zuhdi, A, Aoyama, H (2015) Reentrant FMS scheduling in loop layout with consideration of multi loading-unloading stations and shortcuts, International Journal of Advanced Manufacturing Technology, 82(9), pp.1527-1545, ISSN: 1433-3015. DOI: 10.1007/s00170-015-7395-5.

Case, K, Hussain, A, Marshall, R, Summerskill, SJ, Gyi, DE (2015) Digital human modelling and the ageing workforce, Procedia Manufacturing, 3, pp.3694-3701, ISSN: 1877-7058. DOI: 10.1016/j.promfg.2015.07.794.

Mohamaddan, S, Syed Shazali, ST, Zainal Abidin, AS, Case, K (2015) Human movement representation in virtual environment using gaming software, Jurnal Teknologi (Sciences and Engineering), 77(27), pp.77-81, ISSN: 2180-3722.

Osman Zahid, MN, Case, K, Watts, DM (2015) End mill tools integration in CNC machining for rapid manufacturing processes: Simulation studies, Production and Manufacturing Research, 3(1), pp.274-288, ISSN: 2169-3277. DOI: 10.1080/21693277.2015.1094756.

Hussain, A, Ahmad, A, Case, K (2015) Inclusive design drivers and barriers – a manufacturing perspective from Pakistan, Production and Manufacturing Research, 3(1), pp.289-309, ISSN: 2169-3277. DOI: 10.1080/21693277.2015.1094757.

Nurul Shahida, MS, Siti Zawiah, MD, Case, K (2015) The relationship between anthropometry and hand grip strength among elderly Malaysians, International Journal of Industrial Ergonomics, 50, pp.17-25, ISSN: 1872-8219. DOI: 10.1016/j.ergon.2015.09.006.

Nguyen, H-T, Md Dawal, SZ, Yusoff, N, Aoyama, H, Case, K (2015) An integrated approach of fuzzy linguistic preference based AHP and fuzzy COPRAS for machine tool evaluation, PLoS One, ISSN: 1932-6203. DOI: 10.1371/journal.pone.0133599.

Dawal, SZ, Tahriri, F, Jen, YH, Case, K, Tho, NH, Zuhdi, A, Mousavi, M, Amindoust, A, Sakudarini, N (2015) Empirical evidence of AMT practices and sustainable environmental initiatives in Malaysian automotive SMEs, International Journal of Precision Engineering and Manufacturing, 16(6), pp.1-10, ISSN: 1229-8557. DOI: 10.1007/s12541-015-0154-6.

Hassan, MK, Hussain, A, Ali, H, Noor, F, Kamran, MS, Hassan, W, Case, K (2015) Organizational Safety Climate - A Case Study of Comparing Two OHSAS Certified Food Processing Plants, Technical Journal, Journal of University of Engineering & Technology (UET) Taxila, Pakistan, 20(II), pp.19-26, ISSN: 1813-1786. Full text: http://web.uettaxila.edu.pk/techJournal .

Marshall, R, Cook, S, Mitchell, VA, Summerskill, S, Haines, V, Maguire, M, Sims, R, Gyi, D, Case, K (2015) Design and Evaluation: End Users, User Datasets and Personas, Applied Ergonomics, 46, pp.311-317, DOI: 10.1016/j.apergo.2013.03.008.

Mohamaddan, S, Case, K, Abidin, ASZ (2014) A Video-based observation and analysis method to assess human movement and behaviour in crowded areas, World Academy of Science, Engineering and Technology, International Journal of Computer, Information, Systems and Control Engineering, 8(11), pp.1654-1657.

Osman Zahid, MN, Case, K, Watts, DM (2014) Optimization of roughing operations in CNC machining for rapid manufacturing processes, Production & Manufacturing Research, 2(1), pp.519-529, DOI: 10.1080/21693277.2014.938277.

Osman Zahid, MN, Case, K, Watts, D (2014) Cutting Tools in Finishing Operations for CNC Rapid Manufacturing Processes: Experimental Studies, International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8(6), pp.66-70.

Hussain, A, Case, K, Marshall, R, Summerskill, S (2013) An Inclusive Design Method for Addressing Human Variability and Work Performance Issues, International Journal of Engineering and Technology Innovation, 3(3), pp.144-155.

Thorvald, P, Högberg, D, Case, K (2013) The effect of information mobility on production quality, International Journal of Computer Integrated Manufacturing, 27(2), pp.120-128, ISSN: 0951-192X. DOI: 10.1080/0951192X.2013.800236.

Mohamaddan, S and Case, K (2013) An 'inclusive design' approach to human behaviour modelling and simulation, International Journal of Design and Innovation, 1, pp.3-8, ISSN: 2289-7151.

Shazali, STS, Cheong, WL, Johan, HM, Mohammadan, S, Kamaruddin, AMNA, Osman, MS, Case, K (2013) Real-time periodic motion detection and background estimation, International Journal of Design and Innovation, 1, pp.40-44, ISSN: 2289-7151.

Case, K (2013) Tools for User-Centred Design, Advanced Engineering Forum, 10, pp.28-33, DOI: 10.4028/www.scientific.net/AEF.10.28.

Anjum, N, Harding, J, Young, R, Case, K, Usman, Z, Changoora, T (2013) Verification of knowledge shared across design and manufacture using a foundation ontology, International Journal of Production Research, 51(22), pp.6534-6552, ISSN: 0020-7543. DOI: 10.1080/00207543.2013.798051.

Usman, Z, Young, RIM, Chungoora, N, Palmer, C, Case, K, Harding, JA (2013) Towards a formal manufacturing reference ontology, International Journal of Production Research, 51(22), pp.6553-6572, ISSN: 0020-7543. DOI: 10.1080/00207543.2013.801570.

Palmer, C, Chungoora, N, Young, RIM, Gunendran, AG, Usman, Z, Case, K, Harding, JA (2013) Exploiting unified modelling language (UML) as a preliminary design tool for Common Logic-based ontologies in manufacturing, International Journal of Computer Integrated Manufacturing, 26(3), pp.267-283, ISSN: 0951-192X. DOI: 10.1080/0951192X.2012.688142.

Chungoora, N, Young, RI, Palmer, C, Usman, Z, Anjum, NA, Harding, JA, Case, K, Gunendran, G, Cutting-Decelle, A-F (2013) A model-driven ontology approach for manufacturing system interoperability and knowledge sharing, Computers in Industry, ISSN: 0166-3615. DOI: 10.1016/j.compind.2013.01.003.

Chungoora, N, Cutting-Decelle, A-F, Young, RIM, Gunendran, G, Usman, Z, Harding, JA, Case, K (2013) Towards the ontology-based consolidation of production-centric standards, International Journal of Production Research, 51(2), pp.327-345, ISSN: 0020-7543. DOI: 10.1080/00207543.2011.627885.

Chungoora, N, Gunendran, GA, Young, RIM, Usman, Z, Anjum, NA, Palmer, C, Harding, JA, Case, K, Cutting-Decelle, A-F (2012) Extending product lifecycle management for manufacturing knowledge sharing, Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 226(A12), pp.2047-2063, ISSN: 0954-4054. DOI: 10.1177/0954405412461741.

Sims, RE, Marshall, R, Summerskill, SJ, Gyi, DE, Case, K (2012) Supporting older and disabled people’s needs in product, environment and service design, International Journal of Business, Humanities & Technology, 2(2), pp.212-220.

Sims, RE, Gyi, DE, Marshall, R, Case, K (2012) Activities of daily life still cause problems for many older and physically impaired people, Design for All Institute of India, 7(7), pp.165-181.

Anjum, N, Harding, JA, Young, RIM, Case, K (2012) Manufacturability verification through feature-based ontological product models, Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 226(B6), pp.1086-1098, ISSN: 0954-4054. DOI: 10.1177/0954405412437125.

Thorvald, P, Case, K, Hogberg, D (2012) Applying cognitive science to digital human modelling for user centred design, International Journal of Human Factors Modelling and Simulation, 3(1), pp.90-106.

Sims, RE, Marshall, R, Gyi, DE, Summerskill, SJ, Case, K (2012) Collection of anthropometry from older and physically impaired persons: Traditional methods versus TC 2 3-D body scanner, International Journal of Industrial Ergonomics, 42(1), pp.65-72, ISSN: 0169-8141. DOI: 10.1016/j.ergon.2011.10.002.

Anjum, NA, Harding, JA, Young, RI, Case, K (2012) Mediation of foundation ontology based knowledge sources, Computers in Industry, 63(5), pp.433-442, ISSN: 0166-3615. DOI: 10.1016/j.compind.2012.01.009.

Sims, RE, Marshall, R, Summerskill, SJ, Case, K, Gyi, DE, Davis, P (2011) Involving older and disabled people in assessment of product, environment and service designs, Journal of Human Development, Disability and Social Change, 19(3), pp.25-35, ISSN: 1499-5549.

Yusof, Y and Case, K (2010) Design of a STEP compliant system for turning operations, Journal of Robotics and Computer-Integrated Manufacturing, 26(6), pp.753-758, ISSN: 0736-5845. Full text: http://dx.doi.org/10.1016/j.rcim.2010.05.002. DOI: 10.1016/j.rcim.2010.05.002.

Case, K, Nor, MA, Teoh, PC (2010) A diagnostic service tool using FMEA, International Journal of Computer Integrated Manufacturing, 23(7), pp.640-654, Full text: http://dx.doi.org/10.1080/0951192X.2010.486007. DOI: 10.1080/0951192X.2010.486007.

Marshall, R, Case, K, Porter, JM, Summerskill, SJ, Gyi, DE, Davis, PM, Sims, RE (2010) HADRIAN: a virtual approach to design for all, Journal of Engineering Design, 21(2&3), pp.253-273, ISSN: 0954-4828. DOI: 10.1080/09544820903317019.

(2010) Application of Digital Human Modelling Tools in User Centred Design Processes, International Journal of Human Factors Modelling and Simulation, 1(4), pp.353-355.

Summerskill, SJ, Marshall, R, Case, K, Gyi, DE, Sims, RE, Davis, P, Day, PN, Rohan, C, Birnie, S (2010) Validation of the HADRIAN system using an ATM evaluation case study, International Journal of Human Factors Modelling and Simulation, 1(4), pp.420-432, ISSN: 1742-5557. DOI: 10.1504/IJHFMS.2010.040275.

Cochrane, SD, Young, RIM, Case, K, Harding, JA, Gao, J, Dani, S, Baxter, D (2009) Manufacturing knowledge verification in design support systems, International Journal of Production Research, 47(12), pp.3179-3204, ISSN: 1366-588X. Full text: http://dx.doi.org/10.1080/00207540701802452. DOI: 10.1080/00207540701802452.

Yusof, Y, Newman, ST, Nassehi, A, Case, K (2009) Interoperable CNC system for turning operations, World Academy of Science, Engineering and Technology, 49, pp.922-927, ISSN: 2070-3724.

Marshall, R, Porter, JM, Sims, RE, Summerskill, SJ, Gyi, DE, Case, K (2009) The HADRIAN approach to accessible transport, Work - A Journal of Prevention, Assessment & Rehabilitation, 33(3), pp.335-344, ISSN: 1051-9815. DOI: 10.3233/WOR-2009-0881.

Baxter, DI, Gao, JX, Case, K, Harding, JA, Young, RI, Cochrane, SD, Dani, S (2008) A framework to integrate design knowledge reuse and requirements management in engineering design, International Journal of Robotics and Computer-Integrated Manufacturing, 24(4), pp.585-593, ISSN: 0736-5845. DOI: 10.1016/j.rcim.2007.07.010.

Cochrane, SD, Young, RI, Case, K, Harding, JA, Gao, J, Dani, S, Baxter, D (2008) Knowledge reuse in manufacturability analysis, International Journal of Robotics and Computer-Integrated Manufacturing, 24(4), pp.508-513, ISSN: 0736-5845. Full text: http://dx.doi.org/10.1016/j.rcim.2007.07.003. DOI: 10.1016/j.rcim.2007.07.003.

Baxter, D, Gao, J, Case, K, Harding, JA, Young, RI, Cochrane, SD, Dani, S (2007) An engineering design knowledge reuse methodology using process modelling, International Journal of Research in Engineering Design, 18(1), pp.37-48, ISSN: 0934-9839. Full text: http://dx.doi.org/10.1007/s00163-007-0028-8. DOI: 10.1007/s00163-007-0028-8.

Bäckstrand, G, Högberg, D, De Vin, LJ, Case, K (2007) Ergonomics analysis in a virtual environment, International Journal of Manufacturing Research, 2(2), pp.198-208, Full text: http://dx.doi.org/10.1504/IJMR.2007.014645. DOI: 10.1504/IJMR.2007.014645.

Das, BP, Cutting Decelle, AF, Young, RI, Case, K, Rahimifard, S, Anumba, CJ, Bouchlaghem, NM (2007) Towards the understanding of the requirements for a communication language to support interoperation in cross disciplinary supply chains, International Journal of Computer Integrated Manufacturing, 20(4), pp.396-410, ISSN: 0951-192X. DOI: 10.1080/09511920600873741.

Cutting Decelle, AF, Das, BP, Young, RI, Case, K, Rahimifard, S, Anumba, CJ, Bouchlaghem, NM (2007) A review of approaches to supply chain communications: from manufacturing to construction, International Journal of IT in Construction, 12, pp.73-102, ISSN: 1874-4753. Full text: http://www.itcon.org/2007/5 .

Cutting-Decelle, AF, Das, BP, Young, RI, Case, K, Bouchlaghem, NM, Anumba, CJ (2006) Information exchanges in a cross-disciplinary supply chain: Formal strategy and application, Information Control Problems in Manufacturing 2006, IFAC Proceedings Volumes (IFAC-PapersOnline), 39(3), pp.603-608, ISSN: 1474-6670. DOI: 10.3182/20060517-3-FR-2903.00307.

Cutting Decelle, AF, Das, BP, Young, RI, Case, K, Rahimifard, S, Anumba, CJ, Bouchlaghem, NM (2006) Building supply chain communication systems: a review of methods and techniques, The Data Science Journal, 5, pp.29-51, ISSN: 1683-1470. DOI: 10.2481/dsj.5.29.

Dani, S, Harding, JA, Case, K, Young, RI, Gao, J, Cochrane, SD, Baxter, D (2006) A methodology for best practice knowledge management, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220(B10), pp.1717-1728, ISSN: 0954-4054. Full text: http://dx.doi.org/10.1243/09544054JEM651. DOI: 10.1243/09544054JEM651.

Teoh, PC and Case, K (2005) An evaluation of failure modes and effects analysis generation method for conceptual design, International Journal of Computer Integrated Manufacturing, 18(4), pp.279-293, ISSN: 1362-3052. DOI: 10.1080/0951192042000273122.

Teoh, PC and Case, K (2004) Failure modes and effects analysis through knowledge modelling, Journal of Materials Processing Technology, 153, pp.253-260, ISSN: 0924-0136. DOI: 10.1016/j.jmatprotec.2004.04.298.

Marshall, R, Case, K, Porter, JM, Sims, RE, Gyi, DE (2004) Using HADRIAN for eliciting virtual user feedback in 'design for all', Proceedings of the Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture, 218(9), pp.1203-1210, ISSN: 0954-4054. DOI: 10.1243/0954405041897149.

Gyi, DE, Sims, RE, Porter, JM, Marshall, R, Case, K (2004) Representing older and disabled people in virtual user trials: data collection methods, Applied Ergonomics, 35(5), pp.443-451, ISSN: 0003-6870. DOI: 10.1016/j.apergo.2004.04.002.

Case, K, Graham, IJ, Wood, RL (2004) Shape modification using genetic algorithms, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218(B7), pp.827-832, ISSN: 0954-4054. Full text: http://www.ingentaconnect.com/content/pep/jem/2004/00000218/00000007/art00016. DOI: 10.1177/095440540421800716.

Porter, JM, Case, K, Marshall, R, Gyi, DE, Sims, RE (2004) 'Beyond Jack and Jill': designing for individuals using HADRIAN, International Journal of Industrial Ergonomics, 33(3), pp.249-264, ISSN: 0169-8141. Full text: http://www.elsevier.com/locate/ergon. DOI: 10.1016/j.ergon.2003.08.002.

Teoh, PC and Case, K (2004) Modelling and reasoning for failure modes and effects analysis generation, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218(B3), pp.289-300, ISSN: 0954-4054. Full text: http://dx.doi.org/10.1243/095440504322984849. DOI: 10.1243/095440504322984849.

Case, K, Graham, IJ, Wood, RL, Abdul Karim, MS (2003) CAD genetic algorithms for evolutionary form and function design, International Journal for Manufacturing Science and Production, 5(1-2), pp.11-15, DOI: 10.1515/IJMSP.2003.5.1-2.11.

Marshall, R, Case, K, Oliver, RE, Gyi, DE, Porter, JM (2002) A task based 'design for all' support tool, Robotics and Computer-Integrated Manufacturing, 18(3-4), pp.297-303, ISSN: 0736-5845. DOI: 10.1016/S0736-5845(02)00021-2.

Graham, IJ, Case, K, Wood, RL (2001) Genetic algorithms in computer-aided design, Journal of Materials Processing Technology, 117(1-2), pp.216-221, ISSN: 0924-0136. DOI: 10.1016/S0924-0136(01)01144-X.

Case, K, Porter, JM, Gyi, DE, Marshall, R, Oliver, RE (2001) Virtual fitting trials in 'design for all', Journal of Materials Processing Technology, 117(1-2), pp.255-261, ISSN: 0924-0136. Full text: http://dx.doi.org/10.1016/S0924-0136(01)01143-8. DOI: 10.1016/S0924-0136(01)01143-8.

Case, K and Wan Harun, WA (2000) Feature-based representation for manufacturing planning, International Journal of Production Research, 38(17), pp.4285-4300, ISSN: 0020-7543. DOI: 10.1080/00207540050205091.

Abdul Rani, MR, Sinclair, MA, Case, K (2000) Human mismatches and preferences for automation, International Journal of Production Research, 38(17), pp.4033-4039, ISSN: 0020-7543. DOI: 10.1080/00207540050204894.

Gyi, DE, Porter, JM, Case, K (2000) Design practice and 'designing for all', Proceedings of the XIVth Triennial Congress of the International Ergonomics Association and 44th Annual Meeting of the Human Factors and Ergonomics Association, 'Ergonomics for the New Millennium', 44(38), pp.913-916, DOI: 10.1177/154193120004403864.

Case, K and Hounsell, M (2000) Feature modelling: A validation methodology and its evaluation, Journal of Materials Processing Technology, 107(1-3), pp.15-23, ISSN: 0924-0136. DOI: 10.1016/S0924-0136(00)00693-2.

Wan Harun, WA and Case, K (1999) A Feature-based representation of process planning and assembly knowledge for concurrent engineering applications, Proceedings of Journal of Industry Technology, 8(2), pp.19-30, ISSN: 0128-4940.

Porter, JM, Freer, M, Case, K (1999) Computer aided ergonomics, Engineering Designer, 25(2), pp.4-9.

Freer, M, Porter, JM, Case, K (1999) Comfort equals productivity, Industrial Vehicle Technology Europe, (6), pp.37-42, ISSN: 1461-0450.

Case, K and Wan Harun, WA (1999) A single representation to support assembly and process planning in feature-based design machined parts, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 213(B2), pp.143-155, ISSN: 0954-4054. DOI: 10.1243/0954405991517326.

Case, K, Sinclair, MA, Abdul Rani, MR (1999) An experimental investigation of human mismatches in machining, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 213(B2), pp.197-201, ISSN: 0954-4054. DOI: 10.1243/0954405991517326.

Hounsell, MS and Case, K (1999) Feature-based interaction: An identification and classification methodology, Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 213(B4), pp.369-380, ISSN: 0954-4054. DOI: 10.1243/0954405991516840.

Case, K, Xiao, DC, Acar, BS, Porter, JM (1999) Computer aided modelling of the human spine, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 213(B1), pp.83-86, ISSN: 0954-4054. DOI: 10.1243/0954405991516679.

Acar, BS, Case, K, Porter, JM, Xiao, DC (1998) Spine modelling and "safe to use" equipment design, Journal of Biomechanics, 31(Supp. 1), p.9, ISSN: 0021-9290. DOI: 10.1016/S0021-9290(98)80018-3.

Xiao, DC, Acar, BS, Case, K, Porter, JM (1998) Stability of the spine modelled as an arch, Studies and Monographs (International Biomechanics Society), Vol 55 'The Problem of Muscular Synergism', 1, pp.135-140, ISSN: 0239-6009.

Xiao, DC, Case, K, Acar, BS, Porter, JM (1997) Internal forces in the spine modelled as an arch, Proceedings of the 10th International Biomechanics Seminar, 10, pp.106-113, ISSN: 1100-2247.

Porter, JM, Case, K, Freer, MT (1996) SAMMIE computer aided ergonomics, Co-Design, the interdisciplinary journal of design and contextual studies, 7-8, pp.68-75.

Gindy, NNZ, Ratchev, TM, Case, K (1996) Component grouping for cell formation using resource elements, International Journal of Production Research, 34(3), pp.727-752, ISSN: 0020-7543. DOI: 10.1080/00207549608904931.

Gindy, NNZ, Ratchev, TM, Case, K (1995) Component grouping for GT applications - a fuzzy clustering approach with validity measure, International Journal of Production Research, 33(9), pp.2493-2509, ISSN: 0020-7543. DOI: 10.1080/00207549508904828.

Chan, AKW and Case, K (1994) Process planning by recognising and learning machining features, International Journal of Computer Integrated Manufacturing, 7(2), pp.77-99, ISSN: 0951-192X. DOI: 10.1080/09511929408944597.

Wright, CD and Case, K (1994) Emulation of modular manufacturing machines using CAD modelling, Mechatronics, 4(7), pp.713-735, DOI: 10.1016/0957-4158(94)90033-7.

Case, K, Gao, JX, Gindy, NNZ (1994) The implementation of a feature-based component representation for CAD/CAM integration, Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 208(B1), pp.71-80, ISSN: 0954-4054. DOI: 10.1243/PIME_PROC_1994_208_061_02.

Yan, XT, Case, K, Weston, RH (1994) A generalised approach to the modelling of modular machines, Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 208(B3), pp.191-203, ISSN: 0954-4054. DOI: 10.1243/PIME_PROC_1994_208_078_02.

Case, K (1994) Using a design by features CAD system for process capability modelling, Computer Integrated Manufacturing Systems, 7(1), pp.39-49, ISSN: 0951-5240. DOI: 10.1016/0951-5240(94)90052-3.

Case, K and Gao, X (1993) Feature technology - an overview, International Journal of Computer Integrated Manufacture, 6(1&2), pp.2-12, DOI: 10.1080/09511929308944549.

Case, K, Bonney, MC, Porter, JM (1991) Computer graphics standards for man modelling, Computer Aided Design, 23(4), pp.257-268, ISSN: 0010-4485. DOI: 10.1016/0010-4485(91)90066-6.

Doyle, R and Case, K (1991) The logical and geometric modelling of a universal machine control reference architecture, Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, C415/019, pp.189-197.

Acar, BS and Case, K (1990) Attitudes to integrated design and process planning, Journal of Manufacturing Systems, 19(2), pp.101-108.

Yan, XT, Weston, RH, Case, K (1990) An emulation system for machine design and control, Society of Manufacturing Engineers, MS90-840, pp.1-18.

Doyle, R and Case, K (1990) CAE software in manufacturing engineering education, Computers and Education, 15(1-3), pp.277-288, DOI: 10.1016/0360-1315(90)90158-4.

Case, K and Acar, BS (1990) Comparative study of geometry specification capabilities of geometric modelling systems, Human-Computer Interaction, 1, pp.345-350.

Case, K and Acar, BS (1989) Learning studies in the use of computer aided design systems for discrete parts manufacture, Behaviour and Information Technology, 8(5), pp.353-368, ISSN: 0144-929X. DOI: 10.1080/01449298908914566.

Chan, SF, Weston, RH, Case, K (1988) Robot simulation and off-line programming, Computer-aided Engineering Journal, 5(4), pp.157-162, ISSN: 0263-9327.

Hart, N, Case, K, Bennaton, J, Acar, S (1986) CAD engineering language to aid manufacture, Institution of Mechanical Engineers Conference Publications, 1, pp.335-340.

Acar, BS, Case, K, Bennaton, J, Hart, N (1986) Evaluation of a new approach to design and process planning, Institution of Mechanical Engineers Conference Publications, C371/86, pp.131-135, ISSN: 0144-0799.

Case, K, Blunsdon, CA, Austin, K (1983) Computer aids for floodlighting design, Applied Ergonomics, 14(1), pp.29-37, ISSN: 0003-6870. DOI: 10.1016/0003-6870(83)90216-8.

Case, K, Blunsdon, CA, Austin, K (1982) Computer aids for floodlighting design, Ergonomics, 25(4), pp.337-337, ISSN: 0014-0139.

Kingsley, EC, Schofield, NA, Case, K (1981) SAMMIE: a computer aid for man machine modelling, ACM SIGGRAPH Computer Graphics, 15(3), pp.163-169, ISSN: 0097-8930. DOI: 10.1145/965161.806802.

Case, K and Porter, JM (1980) SAMMIE: A computer aided ergonomics design system, Engineering, 220, pp.21-25.

Case, K, Porter, JM, Bonney, MC, Levis, JA (1980) Design of mirror systems for commercial vehicles, Applied Ergonomics, 11(4), pp.199-206, DOI: 10.1016/0003-6870(80)90229-X.

Heginbotham, WB, Dooner, M, Case, K (1979) Robot application simulation, Industrial Robot, 6(2), pp.76-80, DOI: 10.1108/eb004753.

Bonney, MC, Blunsdon, CA, Case, K, Porter, JM (1979) Man-machine interaction in work systems, International Journal of Production Research, 17(6), pp.619-629, DOI: 10.1080/00207547908919641.

Bonney, MC, Case, K, Hughes, BJ, Kennedy, DN, Williams, RW (1974) Using SAMMIE for computer aided work place and work task design, Society of Automotive Engineers, Publication No. 740270, pp.1-13, DOI: 10.4271/740270.



Conferences

Zahoor, S, Shehzad, A, Case, K, Saram, MU, Zahoor, Z, Chaudhry, IA (2017) An approach to PLC in fast moving consumer goods: A case study from Pakistan. In Gao, J, El Souri, M, Keates, S (ed) Fifteenth International Conference on Manufacturing Research, Advances in Manufacturing Technology XXXI, University of Greenwich, London, pp.447-451, ISBN: 978-1-61499-791-7. DOI: 10.3233/978-1-61499-792-4-447.

Hussain, AS, Fahad Ali, S, Case, K, Masood, T, Masood, M (2017) Assessment of Corporate Social Responsibility (CSR) awareness and practices in manufacturing sector of Pakistan. In Gao, J, Al Souri, M, Keates, S (ed) Fifteenth International Conference on Manufacturing Research, Advances in Manufacturing Technology XXXI, University of Greenwich, London, pp.389-394, ISBN: 978-1-61499-791-7. DOI: 10.3233/978-1-61499-792-4-389.

Zahoor, S, Shehzad, A, Case, K, Hussain, A, Zahoor, Z, Waqar Shoaib, M (2017) Experimental investigation of surface roughness for different thickness of aluminium in abrasive waterjet machining. In Fifteenth International Conference on Manufacturing Research, Advances in Manufacturing Technology XXXI, University of Greenwich, London, pp.9-14, ISBN: 978-1-61499-791-7. DOI: 10.3233/978-1-61499-792-4-9.

Sanchez, A, Goh, YM, Case, K (2017) Identifying variability key characteristics for automation design - a case study of finishing process. In 21st International Conference on Engineering Design, ICED17, Vancouver, Canada, pp.21-30.

Hussain, A, Javed, I, Case, K, Ahmad, A, Safdar, N (2016) Ergonomic risk assessment – a case study of a garment manufacturing industry. In Fourteenth International Conference on Manufacturing Research, Advances in Manufacturing Technology XXX, Loughborough University, UK, pp.237-242.

Brolin, A, Case, K, Thorvald, P (2016) Cognitive aspects affecting human performance in manual assembly. In Fourteenth International Conference on Manufacturing Research, Advances in Manufacturing Technology XXX, Loughborough University, UK, pp.231-236.

Mat, S, Case, K, Mohamaddan, S, Goh, YM (2016) Motivation and learning in manufacturing industries. In Fourteenth International Conference on Manufacturing Research, Advances in Manufacturing Technology XXX, Volume 3 of Advances in Transdisciplinary Engineering, Loughborough, UK, pp.225-230.

Sanaullah, I, Hussain, A, Chaudhry, A, Case, K, Enoch, M (2016) Autonomous vehicles in developing countries: A case study on user’s view point in pakistan. In International Conference on Human Factors in Transportation, Advances in Intelligent Systems and Computing, Walt Disney World, Florida, pp.561-569, ISBN: 9783319416816. DOI: 10.1007/978-3-319-41682-3_47.

Osman Zahid, M, Case, K, Watts, DM (2016) Cutting orientations for non-complex parts in 4th axis machining. In 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015), IOP Conf. Series: Materials Science and Engineering, Kuala Lumpur, Malaysia. DOI: 10.1088/1757-899X/114/1/012013.

Goh, YM and Case, K (2016) Preface. In , Advances in Transdisciplinary Engineering, v, ISBN: 9781614996675.

Goh, YM and Case, K (2016) Acknowledgements. In , Advances in Transdisciplinary Engineering, vii, ISBN: 9781614996675.

Sanchez, A, Mat, S, Goh, YM, Case, K (2015) Human variability, task complexity and motivation contribution in manufacturing. In Shehab, E, Ball, P, Tjahjono, B (ed) Eleventh International Conference on Manufacturing Research, Advances in Manufacturing Technology XXVII, Cranfield, UK, pp.325-330, ISBN: 9781907413230.

Mat, S, Case, K, Mohamaddan, S (2015) Employee motivation and learning behaviours in Malaysian manufacturing industries. In Newnes, L, Nassehi, A, Dhokia, V (ed) Thirteenth International Conference on Manufacturing Research (ICMR 2015), Advances in Manufacturing Technology XXIX, University of Bath.

Case, K and Hussein, A (2015) The ageing workforce: A case study. In Newnes, L, Nassehi, A, Dhokia, V (ed) Thirteenth International Conference on Manufacturing Research (ICMR 2015), Advances in Manufacturing Technology XXIX, University of Bath, pp.183-188.

Mohamaddan, S, Syed Shazali, ST, Zainal Abidin, AS, Case, K (2015) Human movement representation in virtual environment using gaming software. In Third International Conference on Ergonomics, Melia Hotel, Kuala Lumpur, Malaysia.

Case, K, Hussain, A, Marshall, R, Summerskill, SJ, Gyi, DE (2015) Digital human modelling and the ageing workforce. In Ahram, T, Karwowski, W, Schmorrow, D (ed) 6th International Conference on Applied Human Factors and Ergonomics AHFE 2015 and the Affiliated Conferences, Caesar's Palace, Las Vegas, USA, pp.701-708, ISBN: 978-1-4951-6042-4.

Sanchez, A, Goh, YM, Case, K (Accepted for publication) Human interaction with variability in manual manufacturing processes. A case study.. In Manufacturing the Future 2014, Glasgow.

Mat, S, Case, K, Goh, YM (2014) Motivational and learning behaviour between skilled and un-skilled workers: A pilot case study. In Rehman, F, Woodfine, N, Marasini, R (ed) 12th International Conference on Manufacturing Research, Advances in Manufacturing Technology XXVIII, Southampton Solent University, UK, pp.183-188, ISBN: 978-0-9926958-4-2.

Osman Zahid, MN, Case, K, Watts, D (2014) Cutting tools in finishing operations for CNC rapid manufacturing processes: Simulation studies. In Rehman, F, Woodfine, N, Marasini, R (ed) Twelfth International Conference on Manufacturing Research (ICMR2014), Advances in Manufacturing Technology XXVIII, Southampton Solent University, pp.163-168, ISBN: 978-0-9926958-4-2.

Hussain, A, Ahmad, A, Case, K, Clarkson, PJ, Masood, T, Anwat, SK (2014) Manufacturer's perspective on inclusive design drivers and barriers - developing countries case. In Rehman, F, Woodfine, N, Marasini, R (ed) Twelfth International Conference on Manufacturing Research (ICMR2014), Advances in Manufacturing Technology XXVIII, Southampton Solent University, UK, pp.15-20, ISBN: 978-0-9926958-4-2.

Hussein, A, Case, K, Chatha, KA, Imran, S, Imran, M, Masood, T (2014) Organizational design: Need for a socio-technical inclusive system design approach to meet 21st century workforce challenges. In Ahram, T, Karwowski, W, Marek, T (ed) Fifth International Conference on Applied Human Factors and Ergonomics AHFE 2014, Jagiellonian University, Kraków, Poland, pp.8205-8213.

Sanchez, A, Mat, S, Goh, Y, Case, K (2013) HUMAN VARIABILITY, TASK COMPLEXITY AND MOTIVATION CONTRIBUTION IN MANUFACTURING. In International Conference on Manufacturing Rersearch, Cranfield University.

Osborne, WD and Case, K (2013) Instructional factories and training courses: The inception and implementation of training courses for un-skilled and semi-skilled munitions workers during the Great War. In Shehab, W, Ball, P, Tjahjono, B (ed) Eleventh International Conference on Manufacturing Research, Advances in Manufacturing Technology XXVII, Cranfield University, UK, pp.331-336, ISBN: 9781907413230.

Mohamaddan, S and Case, K (2013) Simulation of human movement and behaviour in crowded spaces using gaming software. In Shehab, E, Ball, P, Tjahjono, B (ed) 11th International Conference on Manufacturing Research, Cranfield University, UK, pp.127-132, ISBN: 9781907413230.

Osman-Zahid, MN, Case, K, Watts, D (2013) Optimisation of roughing operations in CNC machining for rapid manufacturing processes. In Shehab, E, Ball, P, Tjahjono, B (ed) Eleventh International Conference on Manufacturing Research, Advances in Manufacturing Technology XXVII, Cranfield University, UK, pp.233-238, ISBN: 9781907413230.

Hussain, A, Case, K, Marshall, R, Summerskill, SJ (2013) Achieving workplace inclusiveness by using ergonomics risk assessment. In Shehab, E, Ball, P, Tjahjono, B (ed) Eleventh International Conference on Manufacturing Research, Advances in Manufacturing Technology XXVII, Cranfield University, UK, pp.337-342, ISBN: 9781907413230.

Case, K (2013) Ergonomics applications in industries: Experience and perspectives from the West. In Seminar on 'Ergonomics is Economics', Alor Setar, Malaysia, pp.1-59.

Case, K (2013) Human modelling. In Workshop on Manual Lifting Analysis and Digital Human Modelling in Workstation Design, Second International Conference on Ergonomics, ICE2013, Kuala Lumpur, Malaysia, pp.1-112.

Case, K (2013) Tools for user-centred design. In Second International Conference on Ergonomic, ICE2013, 'Future Human Centred Design', Proceedings of the Second International Conference on Ergonomics, ICE2013, Kuala Lumpur, Malaysia, pp.1-6.

Case, K (2012) User centred design. In Invited Lecture, University of Malaya, Malaysia, pp.1-1.

Mohamaddan, S and Case, K (2012) Human behaviour simulation using gaming software based on video observation analysis. In International Conference in Humanities, Social Sciences and Technology, ICHSST 2012, Proceedings of the International Conference in Humanities, Social Sciences and Technology, ICHSST 2012, Cardiff, UK, pp.1-8.

Hussain, A, Marshall, R, Summerskill, SJ, Case, K (2012) Workforce diversity and ergonomics challenges for sustainable manufacturing organisations. In Trzcielinski, S and Karwowski, W (ed) Fourth International Conference on Applied Human Factors and Ergonomics, AHFE 2012, 'Advances in Ergonomics in Manufacturing’, the Proceedings of the Fourth International Conference on Applied Human Factors and Ergonomics, AHFE 2012, San Francisco, USA, pp.23-32, ISBN: 978-0-9796435-5-2.

Thorvald, P, Bäckstrand, G, Högberg, D, Case, K (2012) Syntax and sequencing of assembly instructions. In Rebelo, F and Soares, MM (ed) Fourth International Conference on Applied Human Factors and Ergonomics, AHFE 2012, 'Advances in Usability Evaluation Part II', Proceedings of the Fourth International Conference on Applied Human Factors and Ergonomics, AHFE 2012, San Francisco, USA, pp.266-275, ISBN: 978-0-9796435-5-2.

Brolin, A, Bäckstrand, G, Högberg, D, Thorvald, P, Case, K (2012) Kitting as an information source in manual assembly. In Trzcielinski, S and Karwowski, W (ed) Fourth International Conference on Applied Human Factors and Ergonomics, AHFE 2012, 'Advances in Ergonomics in Manufacturing', the Proceedings of the Fourth International Conference on Applied Human Factors and Ergonomics, AHFE 2012, San Francisco, USA, pp.346-353, ISBN: 978-0-9796435-5-2.

Osborne, WD and Case, K (2012) The welfare supervisor: Lessons for the modern day from improvements of conditions for female munitions workers during the Great War. In Baines, TS, Clegg, BT, Harrison, DK (ed) 'Advances in Manufacturing Technology XXVI', the Proceedings of the Tenth International Conference on Manufacturing Research, ICMR 2012, Aston University, Birmingham, UK, pp.249-254, ISBN: 9781905866601.

Hussain, A, Case, K, Summerskill, SJ, Marshall, R (2012) Addressing human variability and work performance through an inclusive design method. In Baines, TS, Clegg, BT, Harrison, DK (ed) Tenth International Conference on Manufacturing Research, ICMR 2012, 'Advances in Manufacturing Technology XXVI', the Proceedings of the Tenth International Conference on Manufacturing Research, ICMR 2012, Aston University, Birmingham, UK, pp.243-248, ISBN: 9781905866601.

Mohamaddan, S and Case, K (2012) Towards understanding of human behaviour in crowded spaces. In Baines, TS, Clegg, BT, Harrison, DK (ed) Tenth International Conference on Manufacturing Research, ICMR 2012, 'Advances in Manufacturing Technology XXVI', the Proceedings of the Tenth International Conference on Manufacturing Research, ICMR 2012, Aston University, Birmingham, UK, pp.637-642, ISBN: 9781905866601.

Mohamaddan, S and Case, K (2012) Agent-based modelling and simulation through video observation analysis. In Kahraman, C, Kerre, EE, Bozbura, FT (ed) Tenth International FLINS Conference, World Scientific Proceedings Series on Computer Engineering and Information Science: Volume 7, 'Uncertainty Modeling in Knowledge Engineering and Decision Making', the Proceedings of the Tenth International FLINS Conference, Istanbul, Turkey, pp.412-417, ISBN: 9789814417730.

Osborne, WD and Case, K (2011) Lessons for modern manufacturing and supply from the Great War. In Harrison, DK, Wood, BM, Evans, D (ed) Ninth International Conference on Manufacturing Research, ICMR 2011, 'Advances in Manufacturing Technology XXV', the Proceedings of the Ninth International Conference on Manufacturing Research, ICMR 2011, Glasgow Caledonian University, Glasgow, UK, pp.113-118, ISBN: 978 1905866 56 4.

Hussain, A, Case, K, Ghani, U, Summerskill, SJ, Marshall, R (2011) Workforce demographics, challenges and strategies; A 'design for all' method in a manufacturing industry perspective. In Harrison, DK, Wood, BM, Evans, D (ed) Ninth International Conference on Manufacturing Research, ICMR 2011, 'Advances in Manufacturing Technology XXV', the Proceedings of the Ninth International Conference on Manufacturing Research, ICMR 2011, Glasgow Caledonian University, Glasgow, UK, pp.80-86, ISBN: 978 1905866 56 4.

Case, K, Freebody, M, Mohammadan, S, Syed Shazali, ST (2011) Human behaviour modelling using gaming software. In Harrison, DK, Wood, BM, Evans, D (ed) Ninth International Conference on Manufacturing Research, ICMR 2011, 'Advances in Manufacturing Technology XXV', the Proceedings of the Ninth International Conference on Manufacturing Research, ICMR 2011, Glasgow Caledonian University, Glasgow, UK, pp.31-36, ISBN: 978 1905866 56 4.

Hussain, A, Case, K, Summerskill, SJ, Marshall, R (2011) Managing older workers, a digital human modelling proactive design approach. In Harrison, DK, Wood, BM, Evans, D (ed) Ninth International Conference on Manufacturing Research, ICMR 2011, 'Advances in Manufacturing Technology XXV', the Proceedings of the Ninth International Conference on Manufacturing Research, ICMR 2011, Glasgow Caledonian University, Glasgow, UK, pp.74-79, ISBN: 978 1905866 564.

Young, RIM, Chungoora, N, Usman, Z, Anjum, NA, Gunendran, AG, Palmer, C, Harding, JA, Case, K, Cutting-Decelle, A-F (2011) Reference ontologies for manufacturing-based ecosystems. In Zelm, M, Johnson, P, Doumeingts, G, van Sinderen, M (ed) Third International Working Conference on Enterprise Interoperability, IWEI 2011, 'Enterprise Interoperability', the Proceedings of the Third International Working Conference on Enterprise Interoperability, IWEI 2011, Stockholm, Sweden, pp.61-72, ISBN: 9781848213173.

Shazali, STS, Cheong, WL, Mohammaddan, S, Kamaruddin, AMNA, Case, K (2011) Motion detection using periodic background estimation subtraction method. In Seventh International Conference on IT in Asia, CITA 2011, Proceedings of the Seventh International Conference on IT in Asia, CITA 2011, University of Sarawak, Kuching, Sarawak, Malaysia, pp.231-234, ISBN: 978-1-61284-128-1. DOI: 10.1109/CITA.2011.5999523.

Case, K, Hussain, A, Marshall, R, Summerskill, SJ, Sims, RE, Gyi, DE (2011) Workforce ageing, the need for an inclusive design approach in manufacturing industry. In Bártolo, H, Alves, N, Bártolo, PJ (ed) First International Conference on Sustainable Intelligent Manufacturing, SIM 2011, Proceedings of the First International Conference on Sustainable Intelligent Manufacturing, SIM 2011, Leiria. Portugal, pp.671-678, ISBN: 978-989-8481-03-0.

Anjum, NA, Harding, JA, Young, RIM, Case, K (2011) Shape Feature-Based Ontological Engineering Product Models. In Zelm, M, Johnson, P, Doumeingts, G, van Sinderen, M (ed) Third International IFIP Working Conference on Enterprise Interoperability, IWEI 2011, Enterprise Interoperability, Stockholm, Sweden, pp.223-242, ISBN: 9781848213173.

Case, K (2011) Inclusive design using digital human modelling. In Invited Lecture, University of Malaya, Malaysia, pp.1-1.

Cheong, WL, Syed Shazali, ST, Kamaruddin, AMNA, Mohammadan, S, Case, K (2011) Emergency evacuation simulation development using game programming. In Fourth Engineering Conference, ENCON 2011, Proceedings of the Fourth Engineering Conference, ENCON 2011, University Malaysia Sarawak, Kuching, Sarawak, Malaysia, pp.1-6.

Hussain, A, Case, K, Usman, Z, Marshall, R, Summerskill, SJ (2011) A more realistic digital human modelling (DHM) approach to manufacturing industry. In International Conference on Advanced Modeling and Simulation, ICAMS 2011, Proceedings of the International Conference on Advanced Modeling and Simulation, ICAMS 2011, Rawalpindi, Pakistan, pp.251-256.

Brolin, A, Bäckstrand, G, Högberg, D, Case, K (2011) Inadequately presented information and its effect on the cognitive workload. In Geraghty, J and Young, P (ed) Twenty-eighth International Manufacturing Conference, IMC 28, 'Manufacturing Sustainability', the Proceedings of the Twenty-eighth International Manufacturing Conference, IMC 28, Dublin City University, Dublin, Ireland, pp.121-129.

Brolin, A, Bäckstrand, G, Högberg, D, Case, K (2011) The use of kitting to ease assemblers' cognitive workload. In Lindfors, J, Savolainen, M, Väyrynen, S (ed) Forty-third Annual Nordic Ergonomics Society Conference, 'Wellbeing and Innovations through Ergonomics', the Proceedings of the Forty-third Annual Nordic Ergonomics Society Conference, NES 2011, Oulu, Finland, pp.77-82.

Usman, Z, Young, RIM, Chungoora, N, Palmer, C, Case, K, Harding, JA (2011) A manufacturing core concepts ontology for product lifecycle interoperability. In Van Sinderen, M and Johnson, P (ed) 3rd International IFIP Working Conference on Enterprise Interoperability, IWEI 2011, 'Enterprise Interoperability', Lecture Notes in Business Information Processing, the Proceedings of the Third International IFIP Working Conference on Enterprise Interoperability, IWEI 2011, Royal Institute of Technology, Stockholm, Sweden, pp.5-18, ISBN: 978-3-642-19679-9. DOI: 10.1007/978-3-642-19680-5_3.

Marshall, R, Case, K, Gyi, DE, Summerskill, SJ, Sims, RE (2011) Supporting an inclusive, sustainable approach to design and manufacture. In Bártolo, H, Alves, N, Bártolo, PJ (ed) First International Conference on Sustainable Intelligent Manufacturing, SIM 2011, Proceedings of the First International Conference on Sustainable Intelligent Manufacturing, SIM 2011, Leiria, Portugal, pp.697-704, ISBN: 978-989-8481-03-0.

Lundström, D, Case, K, Högberg, D (2010) Anthropometric rigging for variable manikin appearance. In Vitanov, VI and Harrison, DE (ed) Eighth International Conference on Manufacturing Research, ICMR 2010, 'Advances in Manufacturing Technology XXIV', the Proceedings of the Eighth International Conference on Manufacturing Research, ICMR 2010, University of Durham, Durham, UK, pp.250-255, ISBN: 978 1 9058665 1 9.

Lee, MJ, Case, K, Marshall, R (2010) Exploring alternative product modularisations with multi-objective optimisation. In Vitanov, VI and Harrison, D (ed) Eighth International Conference on Manufacturing Research, ICMR 2010, 'Advances in Manufacturing Technology XXIV', the Proceedings of the Eighth International Conference on Manufacturing Research, ICMR 2010, University of Durham, Durham, UK, pp.244-249, ISBN: 978 1 9058665 1 9.

Lee, KT and Case, K (2010) Rapid prototyping using conventional 3-axis milling. In Vitanov, VI and Harrison, D (ed) Eighth International Conference on Manufacturing Research, ICMR 2010, 'Advances in Manufacturing Technology XXIV', the Proceedings of the Eighth International Conference on Manufacturing Research, ICMR 2010, University of Durham, Durham, UK, pp.155-160, ISBN: 978 1 9058665 1 9.

Summerskill, SJ, Marshall, R, Case, K (2010) Potential improvements to the occupant accommodation design process in vehicles using digital human modelling. In Duffy, VG (ed) Third International Conference on Applied Human Factors and Ergonomics, AHFE 2010, 'Advances in Applied Digital Human Modeling', the Proceedings of the Third International Conference on Applied Human Factors and Ergonomics, AHFE 2010, Miami, Florida, USA, pp.268-278, ISBN: 978 0 9796435 4 5.

Thorvald, P, Brolin, A, Högberg, D, Case, K (2010) Using mobile information sources to increase productivity and quality. In Kaber, DB and Boy, GA (ed) Third International Conference on Applied Human Factors and Ergonomics, AHFE 2010, 'Advances in Cognitive Ergonomics', the Proceedings of the Third International Conference on Applied Human Factors and Ergonomics, AHFE 2010, Miami, Florida, USA, pp.450-459, ISBN: 978-1-4398-3491-6.

Bäckstrand, G, Brolin, A, Högberg, D, Case, K (2010) Supporting attention in manual assembly and its influence on quality. In Kaber, DB and Boy, GA (ed) Third International Conference on Applied Human Factors and Ergonomics, AHFE 2010, 'Advances in Cognitive Ergonomics', the Proceedings of the Third International Conference on Applied Human Factors and Ergonomics, AHFE 2010, Miami, Florida, USA, pp.460-469, ISBN: 978-1-4398-3491-6.

Young, RIM, Chungoora, N, Usman, Z, Anjum, N, Gunendran, AG, Palmer, C, Harding, JA, Case, K (2010) An exploration of foundation ontologies and verification methods for manufacturing knowledge sharing. In Panetto, H and Boudjlida, N (ed) Workshop on Interoperability for Enterprise Software and Applications, I-ESA 2010, 'Interoperability for Enterprise Software and Applications', the Proceedings of the Workshops and Doctorial Symposium of the I-ESA International Conference, Coventry University, UK, pp.83-92, ISBN: 978-1-84821-270-1.

Usman, Z, Young, RIM, Case, K, Harding, JA (2010) A manufacturing foundation ontology for product life cycle interoperability. In Popplewell, K, Harding, JA, Poler, R, Chalmeta, R (ed) International Conference on Interoperability for Enterprise Software and Applications, I-ESA 2010, 'Enterprise Interoperability IV', the Proceedings of the International Conference on Interoperability for Enterprise Software and Applications, I-ESA 2010, Coventry University, UK, pp.147-155, ISBN: 978-1-84996-256-8. DOI: 10.1007/978-1-84996-257-5_14.

Marshall, R, Summerskill, SJ, Case, K, Gyi, DE, Sims, RE (2010) Development and evaluation of task based digital human modelling for inclusive design. In Duffy, VG (ed) Third International Conference on Applied Human Factors and Ergonomics, AHFE 2010, 'Advances in Applied Digital Human Modeling', the Proceedings of the Third International Conference on Applied Human Factors and Ergonomics, AHFE 2010, Miami, Florida, USA, pp.129-138, ISBN: 9781439835111.

Anjum, NA, Harding, JA, Young, RIM, Case, K (2010) Gap analysis of ontology mapping tools and techniques. In Popplewell, K, Harding, JA, Poler, R, Chalmeta, R (ed) International Conference on Interoperability for Enterprise Software and Applications, I-ESA 2010, 'Enterprise Interoperability IV', the Proceedings of the International Conference on Interoperability for Enterprise Software and Applications, I-ESA 2010, Coventry University, UK, pp.303-312, ISBN: 978-1-84996-256-8. DOI: 10.1007/978-1-84996-257-5_28.

Lee, MJ, Case, K, Marshall, R (2009) Product modularity: A multi-objective optimisation approach. In Ceglarek, D (ed) Seventh International Conference on Manufacturing Research, ICMR 2009, 'Advances in Manufacturing Technology XXIII', the Proceedings of the Seventh International Conference on Manufacturing Research, ICMR 2009, University of Warwick, UK, pp.107-112, ISBN: 978 0 9564439 3 9.

Thorvald, P, Högberg, D, Case, K (2009) Incorporating cognitive aspects in digital human modelling. In Duffy, VG (ed) Second International Conference on Digital Human Modeling, ICDHM 2009, Held as Part of HCI International 2009, 'Digital Human Modeling', the Proceedings of the Second International Conference on Digital Human Modeling, ICDHM 2009, Held as Part of HCI International 2009, San Diego, California, USA, pp.323-332, ISBN: 978 3 642 02884 7. DOI: 10.1007/978-3-642-02809-0_35.

Case, K, Marshall, R, Högberg, D, Summerskill, SJ, Gyi, DE, Sims, RE (2009) HADRIAN: Fitting trials by digital human modelling. In Duffy, VG (ed) Second International Conference, ICDHM 2009, held as Part of HCI International 2009, 'Digital Human Modeling', the Proceedings of the Second International Conference, ICDHM 2009, held as Part of HCI International 2009, San Diego, California, USA, pp.673-680, ISBN: 978-3-642-02808-3. DOI: 10.1007/978-3-642-02809-0_71.

Marshall, R, Case, K, Summerskill, SJ, Sims, RE, Gyi, DE, Davis, PM (2009) Virtual task simulation for inclusive design. In Duffy, VG (ed) Second International Conference, ICDHM 2009, held as Part of HCI International 2009, 'Digital Human Modeling', the Proceedings of the Second International Conference, ICDHM 2009, held as Part of HCI International 2009, San Diego, California, USA, pp.700-709, ISBN: 978-3-642-02808-3. DOI: 10.1007/978-3-642-02809-0_74.

Summerskill, SJ, Marshall, R, Case, K, Gyi, DE, Sims, RE, Davis, PM (2009) Validation of the HADRIAN system using an ATM evaluation case study. In Duffy, VG (ed) Second International Conference, ICDHM 2009, held as Part of HCI International 2009, 'Digital Human Modeling', the Proceedings of the Second International Conference, ICDHM 2009, held as Part of HCI International 2009, San Diego, California, USA, pp.727-736, ISBN: 978-3-642-02808-3. DOI: 10.1007/978-3-642-02809-0_77.

Summerskill, SJ, Marshall, R, Gyi, DE, Porter, JM, Case, K, Sims, RE, Davis, PM (2009) Validation of the HADRIAN system with a train station design case study. In Bust, PD (ed) Annual Conference of the Ergonomics Society, 2009, 'Contemporary Ergonomics 2009', the Proceedings of the Annual Conference of the Ergonomics Society, 2009, Royal College of Physicians, London, UK, pp.70-78, ISBN: 978-0-415-80433-2. DOI: 10.1201/9780203872512.ch8.

Marshall, R, Gyi, DE, Case, K, Porter, JM, Sims, RE, Summerskill, SJ, Davis, PM (2009) A design ergonomics approach to accessibility and user needs in transport. In Bust, PD (ed) Annual Conference of the Ergonomics Society, 2009, 'Contemporary Ergonomics 2009', the Proceedings of the Annual Conference of the Ergonomics Society, 2009, Royal College of Physicians, London, UK, pp.51-60, ISBN: 978-0-415-80433-2. DOI: 10.1201/9780203872512.ch6.

Davis, PM, Marshall, R, Case, K, Gyi, DE, Sims, RE, Summerskill, SJ (2009) Stress and exclusion - principles and tools for inclusive design. In International Conference on Inclusive Design, INCLUDE 2009, Proceedings of the International Conference on Inclusive Design, INCLUDE 2009, Royal College of Art, London, UK, pp.1-6, ISBN: 978-1-905000-80-7.

Davis, PM, Marshall, R, Case, K, Porter, JM, Gyi, DE, Summerskill, SJ, Sims, RE (2009) Development of tools for reducing the stress of using public transport. In Bust, PD (ed) The Annual Conference of the Ergonomics Society, 2009, 'Contemporary Ergonomics 2009', the Proceedings of the Annual Conference of the Ergonomics Society, 2009, Royal College of Physicians, London, UK, pp.61-69, ISBN: 978-0-415-80433-2. DOI: 10.1201/9780203872512.ch7.

Young, RIM, Gunendran, AG, Chungoora, N, Harding, JA, Case, K (2009) Enabling interoperable manufacturing knowledge sharing in PLM. In McMahon, C, Dutta, D, Huang, G (ed) Sixth International Product Life Cycle Management Conference, PLM09, 'Supporting the Extended Enterprise', Proceedings of the Sixth International Product Life Cycle Management Conference, PLM09, University of Bath, Bath, UK, pp.130-138, ISBN: 9780907776499.

Darlington, R, Wahid, BM, Weston, RH, Case, K, Harrison, R (2008) Simulation support of lean layout considerations for new products: A case from large scale products. In Cheng, K, Makatsoris, H, Harrison, D (ed) Sixth International Conference on Manufacturing Research, ICMR08, 'Advances in Manufacturing Technology XXII', the Proceedings of the Sixth International Conference on Manufacturing Research, ICMR08, Brunel University, London, UK, pp.849-858, ISBN: 978-1-902316-60-4.

Guerrero, A, Weston, RH, Darlington, JF, Case, K, Harrison, R (2008) Development of a new learning methodology for discrete event simulation by reutilising previous software experience. In Cheng, K, Makatsoris, H, Harrison, D (ed) Sixth International Conference on Manufacturing Research, ICMR08, 'Advances in Manufacturing Technology XXII', the Proceedings of the Sixth International Conference on Manufacturing Research, ICMR08, Brunel University, London, UK, pp.647-654, ISBN: 978-1-902316-60-4.

Darlington, JF, Darlington, R, Harrison, R, Lee, L, Case, K, Weston, RH (2008) Decomposition of automotive manufacturing machines through a mechanism taxonomy within a product lifecycle management framework. In Cheng, K, Makatsoris, H, Harrison, D (ed) Sixth International Conference on Manufacturing Research, ICMR08, 'Advances in Manufacturing Technology XXII', the Proceedings of the Sixth International Conference on Manufacturing Research, ICMR08, Brunel University, London, UK, pp.961-968, ISBN: 978-1-902316-60-4.

Case, K, Bäckstrand, G, Högberg, D, Thorvald, P, De Vin, L (2008) An assembly line information system study. In Cheng, K, Makatsoris, H, Harrison, D (ed) Sixth International Conference on Manufacturing Research, ICMR08, 'Advances in Manufacturing Technology XXII', the Proceedings of the Sixth International Conference on Manufacturing Research, ICMR08, Brunel University, London, UK, pp.181-188, ISBN: 978-1-902316-60-4.

Lee, MJ, Case, K, Marshall, R (2008) Multiple objective optimisation for product modularity. In Simpson, R (ed) Twenty-fifth International Manufacturing Conference, IMC25, 'Manufacturing and Design: The Next Generation', the Proceedings of the Twenty-fifth International Manufacturing Conference, IMC25, Dublin Institute of Technology, Ireland, pp.361-388, ISBN: 1900454289.

Thorvald, P, Bäckstrand, G, Högberg, D, de Vin, L, Case, K (2008) Information presentation in manual assembly - a cognitive ergonomics analysis. In Helgadöttir, B (ed) Fortieth Annual Conference of the Nordic Ergonomics Society (NES2008), Proceedings of the Fortieth Annual Conference of the Nordic Ergonomics Society, NES2008, Reykjavik, Iceland, pp.6-6.

Case, K, Porter, JM, Gyi, DE, Marshall, R, Sims, RE, Summerskill, SJ, Davis, PM (2008) Digital human modelling for virtual fitting trials. In Fortieth Annual Conference of the Nordic Ergonomics Society, NES2008, Proceedings of the Fortieth Annual Conference of the Nordic Ergonomics Society, NES2008, Reykjavik, Iceland, pp.1-6.

Summerskill, SJ, Bird, F, Case, K, Porter, JM, Marshall, R (2008) Ergonomic assessment of the driving cabs of railway vehicles. In Helgadöttir, B (ed) Fortieth Annual Conference of the Nordic Ergonomics Society, NES2008, Proceedings of the Fortieth Annual Conference of the Nordic Ergonomics Society, NES2008, Reykjavik, Iceland, pp.1-6.

Davis, PM, Case, K, Porter, JM, Marshall, R, Gyi, DE, Sims, RE, Summerskill, SJ (2008) The psychological stress perspective - a unifying view of accessibility in public transport and beyond. In Helgadöttir, B (ed) Fortieth Annual Conference of the Nordic Ergonomics Society, NES2008, Proceedings of the Fortieth Annual Conference of the Nordic Ergonomics Society, NES2008, Reykjavik, Iceland, pp.1-6.

Bäckstrand, G, Thorvald, P, de Vin, L, Högberg, D, Case, K (2008) The impact of information presentation on work environment and product quality: a case study. In Helgadöttir, B (ed) Fortieth Annual Conference of the Nordic Ergonomics Society, NES2008, Proceedings of the Fortieth Annual Conference of the Nordic Ergonomics Society, NES2008, Reykjavik, Iceland, pp.1-6.

Lee, MJ, Case, K, Marshall, R (2008) Multi-objective optimisation of product modularity. In de Vin, LJ, Ng, AHC, Thorvald, P, Sullivan, WG, Ahmad, M (ed) Eighteenth International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), Proceedings of the Eighteenth International Conference on Flexible Automation and Intelligent Manufacturing, FAIM, University of Skovde, Sweden, pp.187-196, ISBN: 978-91-633-2757-5.

Case, K and Nor, A (2008) FMEA in maintenance and diagnostics. In de Vin, LJ, Ng, AHC, Thorvald, P, Sullivan, WG, Ahmad, M (ed) Eighteenth International Conference on Flexible Automation and Intelligent Manufacturing, FAIM, Proceedings of the Eighteenth International Conference on Flexible Automation and Intelligent Manufacturing, FAIM, University of Skovde, Sweden, pp.87-94, ISBN: 978-91-633-2757-5.

Thorvald, P, Bäckstrand, G, Högberg, D, de Vin, LJ, Case, K (2008) Demands on technology from a human automation perspective in manual assembly. In de Vin, LJ, NG, AHC, Thorvald, P, Sullivan, WG, Ahmad, M (ed) Eighteenth International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), Proceedings of the Eighteenth International Conference on Flexible Automation and Intelligent Manufacturing, FAIM, University of Skovde, Sweden, pp.632-638, ISBN: 978-91-633-2757-5.

Marshall, R, Summerskill, SJ, Porter, JM, Case, K, Sims, RE, Gyi, DE, Davis, PM (2008) Multivariate design inclusion using HADRIAN. In SAE 2008 Digital Human Modelling for Design and Engineering Symposium, Proceedings of the SAE 2008 Digital Human Modelling for Design and Engineering Conference and Exhibition, Pittsburgh, Pennsylvania, USA, pp.1-8, DOI: 10.4271/2008-01-1899.

Graham, IJ, Campbell, RI, Case, K (2008) User-led development of an interactive evolutionary design system. In Parmee, IC (ed) Eighth International Conference on Adaptive Computing in Design and Manufacture, ACDM 2008, Proceedings of the Eighth International Conference on Adaptive Computing in Design and Manufacture, ACDM 2008, University of the West of England, Bristol, UK, pp.1-6, ISBN: 978-0-9552885-1-7.

Lee, M, Case, K, Marshall, R (2007) Methodology for the Multi-objective Optimisation of Product Modularity. In Stockton, D, Khalil, R, Baines, eds, R (ed) Proceedings of the 5th International Conference on Manufacturing Research, 'Advances in Manufacturing Technology XXI', Leicester, UK, pp.104-109.

Case, K and Nor, A (2007) FMEA in automatic transmission diagnostics analysis (FMEA). In Stockton, DJ, Khalil, RA, Baines, RW (ed) Fifth International Conference on Manufacturing Research, 'Advances in Manufacturing Technology XXI', 'Advances in Manufacturing Technology XXI', the Proceedings of the Fifth International Conference on Manufacturing Research, ICMR 2007, De Montfort University, Leicester, UK, pp.32-36, ISBN: 978-0955671401.

Yusof, Y, Case, K, Newman, ST (2007) Application of STEP-NC for CNC machining of asymmetrical components. In Stockton, DJ, Khalil, RA, Baines, RW (ed) Fifth International Conference on Manufacturing Research, ICMR 2007, 'Advances in Manufacturing Technology XXI', the Proceedings of the Fifth International Conference on Manufacturing Research, ICMR 2007, De Montfort University, Leicester, UK, pp.89-93, ISBN: 978-0955671401.

Lee, M, Case, K, Marshall, R (2007) Methodology for the multi-objective optimisation of product modularity. In Stockton, DJ, Khalil, RA, Baines, RW (ed) Fifth International Conference on Manufacturing Research, 'Advances in Manufacturing Technology XXI', 'Advances in Manufacturing Technology XXI', the Proceedings of the Fifth International Conference on Manufacturing Research, ICMR 2007, De Montfort University, Leicester, UK, pp.104-109, ISBN: 978-0955671401.

Case, K and Nor, A (2007) FMEA in design for service. In Phelan, J (ed) Twenty-fourth International Manufacturing Conference, IMC24, 'Manufacturing: Focus on the Future', the Proceedings of the Twenty-fourth International Manufacturing Conference, IMC24, Waterford Institute of Technology, Ireland, pp.687-694, ISBN: 9780955646805.

Högberg, D and Case, K (2007) Predefined manikins to support consideration of anthropometric diversity by product designers. In Duffy, VGE (ed) First International Conference on Digital Human Modelling, Twelfth International Conference on Human-Computer Interaction, HCI 2007, 'Digital Human Modelling', Proceedings of the First International Conference on Digital Human Modelling, Twelfth International Conference on Human-Computer Interaction, HCI 2007, Beijing, China, pp.110-119, ISBN: 978-3-540-73318-8.

Yusof, Y, Case, K, Newman, ST, Xu, XW (2007) Step compliant system for turning operations. In Seventeenth International Conference on Flexible Automation and Intelligent Manufacturing, Proceedings of the Seventeenth International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2007, Philadelphia, USA, pp.140-147, ISBN: 978-1-427620927.

Högberg, D, Bäckstrand, G, Lämkull, D, De Vin, LJ, Case, K, Örtengren, R, Hanson, L, Berlin, C (2007) Towards dynamic ergonomics analysis of work sequences in virtual environments. In Seventeenth International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2007, Proceedings of the Seventeenth International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2007, Philadelphia, USA, pp.581-588, ISBN: 978-1-427620927.

Bäckstrand, G, Lämkull, D, Högberg, D, De Vin, LJ, Case, K (2007) Reduction of ergonomics design flaws through virtual methods. In Thirty-ninth Annual Nordic Ergonomics Society Conference, Proceedings of the Thirty-ninth Annual Nordic Ergonomics Society Conference, Lysekil, Sweden, pp.1-6.

Porter, JM, Marshall, R, Sims, RE, Case, K, Gyi, DE (2006) HADRIAN: "I am not a number, I am a free man!". In Karlsson, AM, Desmet, P, van Erp, J (ed) Fifth Conference on Design and Emotion, Proceedings of the Fifth Conference on Design and Emotion, Chalmers University Göteborg, Sweden, pp.543-550, ISBN: 91-975079-5-4.

Yusof, Y, Rosso Jr, RSU, Case, K, Newman, ST (2006) The design of a STEP-NC compliant CAD/CAP/CAM system for the manufacture of rotational parts on a CNC turning centre. In Twenty-third International Manufacturing Conference, IMC23, 'Innovations in Manufacturing', the Proceedings of the Twenty-third International Manufacturing Conference, IMC23, University of Ulster, Belfast, UK, pp.19-28.

Bäckstrand, G, De Vin, LJ, Högberg, D, Case, K (2006) Attention, interpreting, decision-making and acting in manual assembly. In Twenty-third International Manufacturing Conference, IMC23, 'Innovations in Manufacturing', the Proceedings of the Twenty-third International Manufacturing Conference, IMC23, University of Ulster, Belfast, UK, pp.165-172.

Bäckstrand, G, Högberg, D, De Vin, LJ, Case, K, Piamonte, P (2006) Ergonomics analysis in a virtual environment. In Twenty-third International Manufacturing Conference, IMC23, 'Innovations in Manufacturing', the Proceedings of the Twenty-third International Manufacturing Conference, IMC23, University of Ulster, Belfast, UK, pp.543-550.

Yusof, Y, Case, K, Newman, ST (2006) Machining of rotational asymmetric components with a single turning centre. In Eighth Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA 2006, Proceedings of the Eighth Biennial ASME Conference on Engineering Systems Design and Analysis, Torino, Italy, pp.673-681, ISBN: 0-7918-4251-7. DOI: 10.1115/ESDA2006-95163.

Porter, JM, Marshall, R, Sims, RE, Gyi, DE, Case, K (2006) HADRIAN gets streetwise. In Pikaar, NR, Koningsveld, EAP, Settels, PJM (ed) Sixteenth Triennial World Congress of the International Ergonomics Association, IEA 2006, 'Meeting Diversity in Ergonomics', the Proceedings of the Sixteenth Triennial World Congress of the International Ergonomics Association, IEA 2006, Maastricht, The Netherlands, pp.1-5, ISBN: 978-0080450551.

Cutting Decelle, AF, Das, BP, Young, RI, Case, K, Bouchlaghem, NM, Anumba, CJ (2006) Information exchanges in a cross-disciplinary supply chain: formal strategy and application. In Dolgui, A, Morel, G, Pereira, C (ed) Information systems, control and interoperability, INCOM 2006, Proceedings of INCOM 2006: Information systems, control and interoperability, St-Etienne, France, pp.603-613, DOI: 10.1016/B978-008044654-7/50228-4.

Sims, RE, Porter, JM, Summerskill, SJ, Marshall, R, Gyi, DE, Case, K (2006) Collection of transport-related data to promote inclusive design door-to-door. In Bust, PD (ed) Annual Conference of the Ergonomics Society, 'Contemporary Ergonomics 2006', the Proceedings of the Annual Conference of the Ergonomics Society, Robinson College, Cambridge, UK, pp.465-469, ISBN: 9780415398183.

Porter, JM, Case, K, Marshall, R, Gyi, DE, Sims, RE (2006) Developing the HADRIAN inclusive design tool to provide a personal journey planner. In Bust, PD (ed) Annual Conference of the Ergonomics Society, 'Contemporary Ergonomics 2006', the Proceedings of the Annual Conference of the Ergonomics Society, Robinson College, Cambridge, UK, pp.470-474, ISBN: 9780415398183.

Högberg, D and Case, K (2006) Manikin characters: User characters in human computer modelling. In , Contemporary Ergonomics 2006, pp.499-503, ISBN: 0415398185.

Marshall, R, Porter, JM, Sims, RE, Gyi, DE, Case, K (2006) HADRIAN. In Bust, PD (ed) Annual Conference of the Ergonomics Society, 'Contemporary Ergonomics 2006', the Proceedings of the Annual Conference of the Ergonomics Society, Robinson College, Cambridge, UK, pp.200-200, ISBN: 9780415398183.

Högberg, D and Case, K (2006) Manikin characters: User characters in human computer modelling. In Bust, PD (ed) Annual Conference of the Ergonomics Society, 'Contemporary Ergonomics 2006', the Proceedings of the Annual Conference of the Ergonomics Society, Robinson College, Cambridge, UK, pp.499-503, ISBN: 9780415398183.

Porter, JM, Marshall, R, Case, K, Gyi, DE, Sims, RE, Summerskill, SJ (2006) HADRIAN: A human factors computer-aided inclusive design tool for transport planning. In The Institution of Engineering and Technology Seminar on Railway Human Factors in a Changing World, IET Seminar Digest, London, pp.45-59, ISBN: 9780863417504. DOI: 10.1049/ic:20060184.

Yusof, Y, Newman, ST, Case, K, Rosso Jr, RSU (2005) Interoperable process planning facility for turn/mill components. In Proceedings of the International Conference on Computer Integrated Systems 2005 (ConCIS 2005), The International Advanced Technology Congress 2005 (ATCi2005), Putrajaya, Proceedings of the International Conference on Computer Integrated Systems 2005 (ConCIS2005), University Putra Malaysia, Selangor, Malaysia, pp.33-40.

Högberg, D and Case, K (2005) The impact of manikin family configuration on accommodation. In Veiersted, B, Fostervold, KI, Gould, KS (ed) Nordic Ergonomics Society Thirty-seventh Annual Conference, NES 2005, 'Ergonomics as a tool in future development and value creation', the Proceedings of the Nordic Ergonomics Society Thirty-seventh Annual Conference, NES 2005, Oslo, Norway, pp.91-95, ISBN: 82-995747-1-4.

Bäckstrand, G, Möller, S, Högberg, D, Sundin, D, De Vin, L, Case, K (2005) Future needs for cost calculation methods connected to ergonomics analysis and simulation. In Veiersted, B, Fostervold, KI, Gould, KS (ed) Thirty-seventh Annual Nordic Ergonomics Society Conference, 'Ergonomics as a tool in future development and value creation', the Proceedings of the Thirty-seventh Nordic Ergonomics Society Conference, NES 2005, Oslo, Norway, pp.312-316, ISBN: 82-995747-1-4.

Cochrane, SD, Case, K, Young, RI, Harding, JA, Dani, S (2005) Knowledge sharing between design and manufacture. In Khosla, R, Howlett, RJ, Jain, LC (ed) Ninth International Conference on Knowledge-Based Intelligent Information & Engineering Systems, KES 2005, Proceedings of the Ninth International Conference on Knowledge Engineering Systems, KES 2005, 'Knowledge-based Intelligent Information and Engineering Systems’, Melbourne, Australia, pp.221-227, ISBN: 9783540288978. DOI: 10.1007/11554028_32.

Cochrane, SD, Case, K, Young, RI, Harding, JA, Dani, S (2005) Knowledge reuse in manufacturability analysis. In Gao, JX, Baxter, DI, Sackett, PJ (ed) Third International Conference on Manufacturing Research 2005, 'Advances in Manufacturing Technology and Management', the Proceedings of the Third International Conference on Manufacturing Research, ICMR 2005, Cranfield University, UK, pp.1-5, ISBN: 1-861941-22-6.

Yusof, Y, Newman, ST, Case, K (2005) STEP compliant NC for interoperable manufacture of turn/mill discrete components. In Vickery, JF (ed) Twenty-second International Manufacturing Conference, IMC22, 'Challenges Facing Manufacturing', the Proceedings of the Twenty-second International Manufacturing Conference, IMC22, Institute of Technology, Tallaght, Dublin, Ireland, pp.529-536, ISBN: 0-9551218-0-9.

Bäckstrand, G, Högberg, D, De Vin, LJ, Case, K (2005) Parameters affecting quality in manual assembly of engines. In Vickery, JF (ed) Twenty-second International Manufacturing Conference, IMC22, 'Challenges Facing Manufacturing', the Proceedings of the Twenty-second International Manufacturing Conference, IMC22, Institute of Technology, Tallaght, Dublin, Ireland, pp.395-402, ISBN: 0-9551218-0-9.

Case, K and Abdul Karim, MS (2005) Aesthetics considerations in evolutionary computer aided design. In Pan, Y, Vergeest, J, Lin, Z, Wang, C, Sun, S, Hu, Z, Tang, Y, Zhou, L (ed) Sixth International Conference on Computer Aided Industrial Design and Conceptual Design (CAID & CD2005), 'Applications of Digital Techniques in Industrial Design Engineering', the Proceedings of the Sixth International Conference on Computer Aided Industrial Design and Conceptual Design, CAID and CD 2005, Delft University of Technology, The Netherlands, pp.476-481, ISBN: 7-5062-7444-2.

Marshall, R, Porter, JM, Sims, RE, Gyi, DE, Case, K (2005) HADRIAN meets AUNT-SUE. In ,ISBN: 1-905000-10-3.

Baxter, DI, Gao, JX, Case, K, Harding, JA, Young, RIM, Cochrane, S, Dani, S (2005) A framework to integrate design knowledge reuse and requirements management in engineering design. In Gao, JX, Baxter, DI, Sackett, PJ (ed) Third International Conference on Manufacturing Research, ICMR 2005, 'Advances in Manufacturing Technology and Management', the Proceedings of the Third International Conference on Manufacturing Research, ICMR 2005, Cranfield University, Cranfield, UK, pp.585-593, ISBN: 1-861941-22-6.

Marshall, R, Case, K, Porter, JM, Sims, RE, Gyi, DE (2005) A computer aided ergonomics tool to support accessible transport design. In Pan, Y, Vergeest, J, Lin, Z, Wang, C, Sun, S, Hu, Z, Tang, Y, Zhou, L (ed) Sixth International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD 2005, 'Applications of Digital Techniques in Industrial Design Engineering', the Proceedings of the Sixth International Conference on Computer Aided Industrial Design and Conceptual Design, CAID and CD 2005, The University of Delft, The Netherlands, pp.482-487, ISBN: 7-5062-7444-2.

Cochrane, SD, Case, K, Young, RI, Harding, JA, Dani, S (2004) Sharing manufacturing knowledge. In Saad, S and Perera, T (ed) Second International Manufacturing Research, ICMR2004, 'Advances in Manufacturing Technology XVIII', the Proceedings of the Second International Conference on Manufacturing Research, ICMR 2004, Sheffield Hallam University, UK, pp.105-109, ISBN: 9781843870883.

Case, K and Harwood, R (2004) Ergonomic design aid for hand-held products. In Phelan, P (ed) Twenty-first International Manufacturing Conference, IMC21, 'Servicing Manufacturing', the Proceedings of the Twenty-first International Manufacturing Conference, IMC21, University of Limerick, Ireland, pp.667-674, ISBN: 1-8746537-7-1.

Cochrane, SD, Case, K, Young, RI, Harding, JA, Dani, S (2004) Knowledge sharing between design and manufacture. In Phelan, P (ed) Twenty-first International Manufacturing Conference, IMC21, 'Servicing Manufacturing', the Proceedings of the Twenty-first International Manufacturing Conference, IMC21, University of Limerick, Ireland, pp.3-10, ISBN: 1-8746537-7-1.

Case, K (2004) Knowledge engineering in product and process design. In Yan, XT, Jiang, CY, Juster, NP (ed) Europe-Asia Symposium on Engineering Design and Manufacture (EASED 2004), Proceedings of the Europe-Asia Symposium on Engineering Design and Manufacture (EASED 2004),'Perspectives from Europe and Asia on Engineering Design and Manufacture', Xi'an, P.R. China, pp.3-17, ISBN: 1-4020-2211-5.

Case, K, Goonetilleke, TS, Marshall, R, Porter, JM, Gyi, DE, Sims, RE (2003) Constraint modelling in 'design for all'. In Cotterell, M (ed) Twentieth International Manufacturing Conference, IMC20, 'Knowledge Driven Manufacturing', 'Knowledge Driven Manufacturing'the Proceedings of the Twentieth International Manufacturing Conference, IMC20, Cork, Ireland, pp.12-19, ISBN: 0-9545736-0-9.

Case, K and Abdul Karim, MS (2003) Computer aided aesthetics and functions evaluation in evolutionary CAD. In Qin, Y and Juster, N (ed) First International Conference on Manufacturing Research, ICMR 2003, 'Advances in Manufacturing Technology XVII’ the Proceedings of the First International Conference on Manufacturing Research, ICMR 2003, University of Strathclyde, Glasgow, Scotland, pp.285-290, ISBN: 9781860584121.

Teoh, PC and Case, K (2003) Failure modes and effects analysis through knowledge modelling. In Olabi, AG and Hashmi, SJ (ed) International Conference on Advances in Materials and Processing Technologies, AMPT2003, Proceedings of the International Conference on Advances in Materials and Processing Technologies, AMPT2003, Dublin City University, Dublin, Ireland, pp.619-622, ISBN: 1-872327-397.

Case, K, Teoh, PC, Gao, J (2003) Knowledge representation and re-use in FMEA. In Wan Abdul Rahman Wan Harun, (ed) Nineteenth International Conference on CAD/CAM Robotics and Factories of the Future, CARs & FOF 2003, Proceedings of the Nineteenth International Conference on CAD/CAM, Robotics and Factories of the Future, CARS & FOF 2003, Kuala Lumpur, Malaysia, pp.1-12, ISBN: 967-924-068-1.

Bakr, EM, Nowrooz, AH, Case, K (2003) Elasto-rigid biodynamic modelling of human lifting activities. In Al-Azhar Engineering Seventh International Conference, Proceedings of the Al-Azhar Engineering Seventh International Conference, Cairo, Egypt, pp.1-16.

Bakr, EM, Case, K, Nowrooz, AH (2003) Reliable data for the finite element modelling of human spines. In Seventh Conference on Theoretical and Applied Mechanics, Proceedings of the Seventh Conference on Theoretical and Applied Mechanics, Egyptian Academy of Scientific Research and Technology, Cairo, Egypt, pp.1-29.

Goonetilleke, TS, Case, K, Marshall, R, Porter, JM, Gyi, DE, Sims, RE (2003) In search of design synthesis by linking ergonomic evaluation and constraint modelling to attain design for all. In Inclusive Design for Society and Business, INCLUDE 2003, Proceedings of Inclusive Design for Society and Business, INCLUDE 2003, Royal College of Art, London, UK, pp.236-242, ISBN: 1-874175-942.

Högberg, D, Hanson, L, Case, K (2003) Computer manikin family usage in human accommodation. In Rafnsdóttir, GL, Gunnarsdóttir, H, Sveinsdóttir, P (ed) Nordic Ergonomics Society Thirty-fifth Annual Conference, NES 2003, 'Mind and Body in a Technological World', the Proceedings of the Nordic Ergonomics Society Thirty-fifth Annual Conference, NES 2003, Reykavik, Iceland, pp.184-188, ISBN: 9789979608615.

Marshall, R, Case, K, Porter, JM, Gyi, DE, Sims, RE (2003) Virtual task analysis in 'design for all'. In Campbell, RI and Balc, NO (ed) European Virtual Engineering Network (EVEN), Proceedings of the EVEN Conference on Virtual Engineering Applications for Design and Product Development, Trinity College Dublin, Ireland, pp.235-242, ISBN: 9780947974152.

Marshall, R, Porter, JM, Case, K, Sims, RE, Gyi, DE (2003) Virtual fitting trials using Sammie and Hadrian. In Campbell, RI and Balc, NO (ed) Virtual Engineering Applications for Rapid Product Development, an EVEN Workshop held at Solid Modelling 2003, Birmingham, UK, pp.35-40.

Porter, JM, Marshall, R, Sims, RE, Gyi, DE, Case, K (2003) HADRIAN: a human modelling CAD tool to promote "design for all". In inclusive design for society and business, INCLUDE 2003, Proceedings of Inclusive Design for Society and Business, INCLUDE 2003, Royal College of Art, London, UK, pp.222-228, ISBN: 1 874175 94 2.

Case, K, Graham, IJ, Wood, RL, Abdul Karim, MS (2002) CAD genetic algorithms for evolutionary form and function design. In Cheng, K and Webb, D (ed) Eighteenth National Conference on Manufacturing Research, ‘Advances in Manufacturing Technology XVI, the Proceedings of the Eighteenth National Conference on Manufacturing Research, NCMR 2002, Leeds Metropolitan University, Leeds, UK, pp.103-107, ISBN: 1-86058-378-4.

Teoh, PC and Case, K (2002) Failure mode and effect analysis generation for conceptual design. In Armstrong, PJ (ed) International Manufacturing Conference, IMC19, 'Manufacturing the Future Through Innovation and Research', Proceedings of the International Manufacturing Conference, IMC19, Queen's University, Belfast, UK, pp.263-272, ISBN: 0-85389-8227.

Högberg, D, Case, K, De Vin, LJ (2002) Overlapping ergonomic evaluation in the automotive design process. In Armstrong, PJ (ed) International Manufacturing Conference, IMC19, 'Manufacturing the Future Through Innovation and Research', Proceedings of the International Manufacturing Conference, IMC19, Queen's University, Belfast, UK, pp.233-241, ISBN: 0-85389-8227.

Högberg, D and Case, K (2002) Supporting 'design for all' in automotive ergonomics. In XVIth Annual International Occupational Ergonomics and Safety Conference, Proceedings of the XVIth Annual International Occupational Ergonomics and Safety Conference, Toronto, Canada, pp.1-5.

Marshall, R, Case, K, Gyi, DE, Sims, RE, Porter, JM (2002) HADRIAN: An integrated design ergonomics analysis tool. In XVIth Annual International Occupational Ergonomics and Safety Conference 2002, Proceedings of the XVIth Annual International Occupational Ergonomics and Safety Conference, Toronto, Canada, pp.1-5, ISBN: 1860583563.

Sims, RE, Marshall, R, Gyi, DE, Porter, JM, Case, K (2002) Collection of design data from older and disabled people. In XVIth Annual International Occupational Ergonomics and Safety Conference 2002, Proceedings of the XVIth Annual International Occupational Ergonomics and Safety Conference, Toronto, Canada, pp.1-5.

Porter, JM, Case, K, Gyi, DE, Marshall, R (2002) How can we "design for all" if we do not know who is designed out and why?. In XVIth Annual International Occupational Eergonomics and Safety Conference 2002, Proceedings of the XVIth Annual International Occupational Ergonomics and Safety Conference, Toronto, Canada, pp.1-5.

Marshall, R, Case, K, Gyi, DE, Oliver, RE, Porter, JM (2001) Supporting 'design for all' through an integrated computer-aided ergonomics tool. In Culley, S, Duffy, A, McMahon, C, Wallace, K (ed) Thirteenth International Conference on Engineering Design - ICED 01, 'Design Methods for Performance and Sustainability', the Proceedings of the Thirteenth International Conference on Engineering Design, Glasgow, UK, pp.331-337, ISBN: 978-1860583568.

Graham, IJ, Case, K, Wood, RL (2001) Evolutionary computer aided design. In 2001 Congress on Evolutionary Computation, CEC 2001, Proceedings of the 2001 Congress on Evolutionary Computation, CEC 2001, Seoul, South Korea,ISBN: 9780780366589.

Oliver, RE, Gyi, DE, Porter, JM, Marshall, R, Case, K (2001) A survey of the design needs of older and disabled people. In Hanson, MA (ed) Annual Conference of the Ergonomics Society 2001, 'Contemporary Ergonomics 2001', the Proceedings of the Annual Conference of the Ergonomics Society, Royal Agricultural College, Cirencester, UK, pp.365-370, ISBN: 0-415-25073-0.

Gyi, DE, Marshall, R, Oliver, RE, Porter, JM, Case, K (2001) The development of a computer design tool for virtual user trials: Data collection methods. In International Conference on Inclusive Design and Communications (INCLUDE 2001), Proceedings of the International Conference on Inclusive Design and Communications (INCLUDE 2001), Royal College of Art, London, UK, p.92.

Marshall, R, Case, K, Oliver, RE, Gyi, DE, Porter, JM (2001) A task based 'design for all' support tool. In El-Baradie, M and Szecsi, TE (ed) Proceedings of the Eleventh International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2001, Dublin City University, Dublin, Ireland, pp.147-157, ISBN: 1-872-32734-6.

Graham, IJ, Case, K, Porter, JM, Wood, RL (2000) Genetic algorithms in computer aided design. In Donnellan, P (ed) Seventeenth Annual Conference of the Irish Manufacturing Committee, IMC-17, ’Building on Manufacturing Advances of the Nineties’, Proceedings of the Seventeenth Annual Conference of the Irish Manufacturing Committee, IMC-17, National University of Ireland, Galway, Ireland, pp.47-53, ISBN: 0-9538974-0-0.

Case, K, Porter, JM, Gyi, DE, Marshall, R, Oliver, RE (2000) Virtual fitting trials in 'design for all'. In Donnellan, P (ed) Seventeenth Annual Conference of the Irish Manufacturing Committee, IMC17, ’Building on Manufacturing Advances of the Nineties’, Proceedings of the Seventeenth Annual Conference of the Irish Manufacturing Committee, IMC-17, National University of Ireland, Galway, Ireland, pp.35-45, ISBN: 0-9538974-0-0.

Gyi, DE, Porter, JM, Case, K (2000) Design practice and 'designing for all'. In XIVth Triennial Congress of the International Ergonomics Association, ‘Ergonomics for the New Millennium’, Proceedings of the XIVth Triennial Congress of the International Ergonomics Association, San Diego, California, USA, pp.913-916, DOI: 10.1177/154193120004403864.

Graham, IJ, Wood, RL, Case, K (1999) Evolutionary form design: The application of genetic algorithmic techniques to computer-aided product design. In Bramley, AN, Mileham, AR, Newnes, LB, Owen, GW (ed) Fifteenth National Conference on Manufacturing Research, NCMR 1999, ‘Advances in Manufacturing Technology XIII‘, the Proceedings of the Fifteenth National Conference on Manufacturing Research, NCMR 1999, University of Bath, Bath, UK, pp.345-349, ISBN: 1-86058-227-3.

Abdul Rani, MR, Sinclair, MA, Case, K (1999) Human mismatches and preferences for automation. In Hillery, MT and Lewis, HJ (ed) Fifteenth International Conference on Production Research, ICPR 15, ‘Manufacturing for a Global Market’, the Proceedings of the Fifteenth International Conference on Production Research, ICPR 15, University of Limerick, Ireland, pp.1319-1322, ISBN: 9781874653561.

Case, K and Wan Harun, WA (1999) Feature-based representation for manufacturing planning. In Hillery, MT and Lewis, HJ (ed) Fifteenth International Conference on Production Research, ICPR 15, ‘Manufacturing for a Global Market’, the Proceedings of the Fifteenth International Conference on Production Research, ICPR 15, University of Limerick, Ireland, pp.1733-1736, ISBN: 1-874653-56-9.

Hounsell, MS and Case, K (1999) An intent-driven paradigm for feature-based design. In Carvalho, MF and Muller, FM (ed) Fifteenth ISPE/IEE International Conference on CAD/CAM, Robotics and Factories of the Future, CARS & FOF '99, Proceedings of the Fifteenth ISPE/IEE International Conference on CAD/CAM, Robotics and Factories of the Future, CARS & FOF '99, Aquas de Lindoia, Brazil, pp.6-11.

Case, K, Porter, JM, Xiao, DC, Gyi, DE (1999) Shadow-scanned human models for car seating design. In Mondelo, P, Mattila, M, Karwowski, W (ed) International Conference on Computer-Aided Ergonomics and Safety, CAES'99, Proceedings of the International Conference on Computer-Aided Ergonomics and Safety, CAES'99, Barcelona, Spain, pp.1-4, ISBN: 84 699 0852 9.

Case, K and Hounsell, MS (1999) Evaluation of a feature modelling validation method. In Maropoulos, PG and McGeough, JA (ed) Fifteenth International Conference on Computer Aided Production Engineering, CAPE '99, Proceedings of the Fifteenth International Conference on Computer Aided Production Engineering, CAPE '99, University of Durham, UK, pp.15-22, ISBN: 978-0953555802.

Case, K, Xiao, DC, Acar, BS, Porter, JM (1998) Computer aided modelling of the human spine. In Baines, RW, Taleb-Bendiab, A, Zhao, Z (ed) The Fourteenth National Conference on Manufacturing Research, NCMR 1998, ‘Advances in Manufacturing Technology XII‘, the Proceedings of the Fourteenth National Conference on Manufacturing Research, NCMR 1998, University of Derby, Derby, UK, pp.369-374, ISBN: 1 86058 172 2.

Abdul Rani, MR, Case, K, Sinclair, MA (1998) Human mismatches in machining. In Baines, RW, Taleb-Bendiab, A, Zhao, Z (ed) The Fourteenth National Conference on Manufacturing Research, NCMR 1998, ‘Advances in Manufacturing Technology XII‘, the Proceedings of the Fourteenth National Conference on Manufacturing Research, NCMR 1998, University of Derby, Derby, UK, pp.3-8, ISBN: 1 86058 172 2.

Hounsell, MS and Case, K (1998) Feature-based designer's intents. In Hepburn, C and Harris, DMJ (ed) The Fifteenth Conference of the Irish Manufacturing Committee, IMC-15, ‘Manufacturing Strategies for Europe‘, the Proceedings of the Fifteenth Conference of the Irish Manufacturing Committee, IMC15, University of Ulster at Jordanstown, UK, pp.193-202, ISBN: 1 85923 104 7.

Hounsell, MS and Case, K (1998) Operating invalid feature-based models. In Ertas, A, Gibson, D, Belli, F, Veniali, F, Noorani, R, Chedmall, P (ed) Third Biennial World Conference on Integration Design and Process Technology, Proceedings of the Third Biennial World Conference on Integrated Design and Process Technology, Berlin, Germany, pp.151-158.

Xiao, D, Case, K, Porter, JM, Acar, BS (1998) Stability of the spine modelled as an arch. In Kornecki, S (ed) Eleventh International Biomechanics Seminar, Proceedings of the Eleventh International Biomechanics Seminar, Wroclaw, Poland, pp.135-140, ISBN: 83-87389-19-6.

Acar, BS, Case, K, Porter, JM, Xiao, DC (1998) Mathematical modelling of human spine and design. In Barrallo, J (ed) Second International Conference on Mathematics and Design, Proceedings of the Second International Conference on Mathematics and Design 98, The University of the Basque Country, San Sebastian, Spain, pp.341-348, ISBN: 84-600-9459-6.

Xiao, DC, Case, K, Acar, BS, Porter, JM (1997) Biomechanical model of the human spine as an arch. In Proceedings of the Twenty-first Annual Meeting of the American Society of Biomechanics, Clemson University, South Carolina, USA, pp.20-21.

Hounsell, MS and Case, K (1997) Morphological and volumetrical feature-based designer's intents. In Harrison, DK (ed) Thirteenth National Conference on Manufacturing Research, NCMR 1997, ‘Advances in Manufacturing Technology XI’, the Proceedings of the Thirteenth National Conference on Manufacturing Research, NCMR 1997, Glasgow Caledonian University, Glasgow, UK, pp.64-68, ISBN: 1 9012 4811 9.

Case, K and Wan Harun, WA (1997) A representation of assembly and process planning knowledge for feature-based design. In Harrison, DK (ed) Thirteenth National Conference on Manufacturing Research, NCMR 1997, ‘Advances in Manufacturing Technology XI’, the Proceedings of the Thirteenth National Conference on Manufacturing Research, NCMR 1997, Glasgow Caledonian University, Glasgow, UK, pp.73-78, ISBN: 1 9012 4811 9.

Hounsell, MS and Case, K (1997) Intent-driven reasoning priorities in a feature-based validation system. In Monaghan, J and Lyons, CG (ed) Fourteenth Conference of the Irish Manufacturing Committee, 'Sustainable Technologies in Manufacturing Industries', the Proceedings of the Fourteenth Conference of the Irish Manufacturing Committee, IMC-14, Trinity College, Dublin, Ireland, pp.115-124, ISBN: 1897606168.

Hounsell, MS and Case, K (1997) Structured multi-level feature interaction identification. In Kochar, AK (ed) Thirty-second International MATADOR Conference, Proceedings of the Thirty-second International MATADOR Conference, UMIST, Manchester, UK, pp.495-500, ISBN: 9780333716557.

Case, K, Porter, JM, Xiao, DC, Acar, BS (1997) Modelling the human body for ergonomic CAD. In Tan, ST, Wong, TN, Gibson, I (ed) International Conference on Manufacturing Automation, ICMA '97, Proceedings of the International Conference on Manufacturing Automation, ICMA '97, University of Hong Kong, pp.697-702, ISBN: 9789628513833.

Case, K (1997) Computer human modelling. In Computer Aided Design Seminar, Hong Kong Open Learning Institute, Hong Kong, pp.1-1.

Porter, JM, Case, K, Freer, M (1997) Recent applications of the SAMMIE system. In Seppala, P, Luopajarvi, T, Nygard, CH, Mattila, M (ed) Thirteenth Triennial Congress of the International Ergonomics Association, 'From Experience to Innovation' the Proceedings of the Thirteenth Triennial Congress of the International Ergonomics Association IEA 1997, Tampere, Finland, pp.93-95, ISBN: 951-802-189-9.

Stepney, PD, Acar, BS, Case, K, Porter, JM (1996) Computer aided parametric solid modelling of the spine. In Jones, H, Raby, R, Vicars, D (ed) Eurograpics UK Chapter 14th Annual Conference, Eurographics UK Proceedings 1996, Imperial College, London, pp.235-244, ISBN: 9780952109730.

Xiao, DC, Case, K, Porter, JM, Gyi, DE (1996) Computer aided analysis of deformation and pressure distribution at the driver/seat interface. In Bramley, AN, Mileham, AR, Owen, GW (ed) Twelfth National Conference on Manufacturing Research, NCMR 1996, ‘Advances in Manufacturing Technology X’, the Proceedings of the Twelfth National Conference on Manufacturing Research, NCMR 1996, University of Bath, Bath, UK, pp.296-300, ISBN: 1 85790 031 6.

Case, K and Palil, MDD (1996) Geometric reasoning for ergonomic vehicle interior design. In Bramley, AN, Mileham, AR, Owen, GW (ed) Twelfth National Conference on Manufacturing Research, NCMR 1996, ‘Advances in Manufacturing Technology X’, the Proceedings of the Twelfth National Conference on Manufacturing Research, NCMR 1996, University of Bath, Bath, UK, pp.291-295, ISBN: 1 85790 031 6.

Hounsell, MS and Case, K (1996) Representation validation in feature-based modelling: A framework for design correctness analysis and assurance. In Bramley, AN, Mileham, AR, Owen, GW (ed) Twelfth National Conference on Manufacturing Research, NCMR 1996, ‘Advances in Manufacturing Technology X’, the Proceedings of the Twelfth National Conference on Manufacturing Research, NCMR 1996, University of Bath, Bath, UK, pp.256-260, ISBN: 1 85790 031 6.

Case, K (1995) Shadow-scanned human representations for car seat design. In Mumford, A (ed) Thirteenth Annual Eurographics UK Conference, Proceedings of the Thirteenth Annual Eurographics UK Conference, Loughborough University of Technology, Loughborough, UK, pp.249-254, ISBN: 9780952109723.

Case, K and Wright, CD (1995) Emulation of modular manufacturing machines. In Kochar, AK (ed) Thirty-first International MATADOR Conference, Proceedings of the Thirty-first International MATADOR Conference, UMIST, Manchester, UK, pp.443-448, ISBN: 978-0333640869.

Case, K, Xiao, DC, Porter, JM (1995) Car seat and occupant modelling using CAD. In Stockton, D and Wainwright, C (ed) Eleventh National Conference on Manufacturing Research, NCMR 1995, ‘Advances in Manufacturing Technology IX’, the Proceedings of the Eleventh National Conference on Manufacturing Research, NCMR 1995, de Montfort University, Leicester, UK, pp.149-153, ISBN: 0-7484-0400-7.

Wan Harun, AR and Case, K (1995) Feature-based representation for assembly modelling. In Stockton, D and Wainwright, C (ed) Eleventh National Conference on Manufacturing Research, NCMR 1995, ‘Advances in Manufacturing Technology IX’, the Proceedings of the Eleventh National Conference on Manufacturing Research, NCMR 1995, de Montfort University, Leicester, UK, pp.134-138, ISBN: 978-0748404001.

Wan Harun, WAR and Case, K (1994) Object-oriented feature-based design. In Case, K and Newman, ST (ed) Tenth National Conference on Manufacturing Research, NCMR 1994, 'Advances in Manufacturing Technology VIII', the Proceedings of the Tenth National Conference on Manufacturing Research, NCMR 1994, Loughborough University of Technology, Loughborough, UK, pp.294-298, ISBN: 0-7484-0254-3.

Yan, XT, Case, K, Weston, RH (1994) An intelligent task programming system for modular manufacturing machines. In Second Singapore International Conference on Intelligent Systems, SPICIS '94, Proceedings of the Second Singapore International Conference on Intelligent Systems, SPICIS '94, Singapore, pp.1-10.

Gao, JX and Case, K (1994) Implementation aspects of a feature-based design system for manufacturing planning. In Olling, GJ (ed) IFIP International Conference on Feature Modelling and Recognition in Advanced CAD/CAM Systems, Proceedings of the IFIP International Conference, Feature Modelling and Recognition in Advanced CAD/CAM systems, Valenciennes, France, pp.773-786.

Gindy, NNZ, Case, K, Ratchev, TM, Gao, JX (1994) Process capability modelling for design and selection of processing equipment. In EPSRC Design and Integrated Production Research Conference, Proceedings of the EPSRC Design and Integrated Production Research Conference, University of Warwick, Coventry, UK, pp.7-12.

Gindy, NNZ, Ratchev, TM, Case, K (1994) Process capability models for equipment selection. In Case, K and Newman, ST (ed) Tenth National Conference on Manufacturing Research, NCMR 1994, 'Advances in Manufacturing Technology VIII', the Proceedings of the Tenth National Conference on Manufacturing Research, NCMR 1994, Loughborough University of Technology, Loughborough, UK, pp.244-248, ISBN: 978-0748402540.

Gao, JX, Case, K, Gindy, NNZ (1994) Geometric elements for tolerance definition in feature-based product models. In Case, K and Newman, ST (ed) Tenth National Conference on Manufacturing Engineering, NCMR 1994, ‘Advances in Manufacturing Technology VIII’, the Proceedings of the Tenth National Conference on Manufacturing Engineering, NCMR 1994, Loughborough University of Technology, Loughborough, UK, pp.264-268, ISBN: 978-0748402540.

Case, K and Wan, AR (1994) Design by features using the ACIS modeller. In Case, K and Newman, ST (ed) Tenth National Conference on Manufacturing Engineering, NCMR 1994, ‘Advances in Manufacturing Technology VIII’, the Proceedings of the Tenth National Conference on Manufacturing Engineering, NCMR 1994, Loughborough University of Technology, Loughborough, UK, pp.294-298, ISBN: 978-0748402540.

Case, K and Doyle, R (1994) The use of gestures in computer aided design. In Case, K and Newman, ST (ed) Tenth National Conference on Manufacturing Research, NCMR 1994, 'Advances in Manufacturing Technology VIII', the Proceedings of the Tenth National Conference on Manufacturing Research, NCMR 1994, Loughborough University of Technology, Loughborough, UK, pp.506-510, ISBN: 978-0748402540.

Case, K (1993) Gestural input for conceptual design. In Science and Engineering Research Council (SERC)/Applications of Computers in Manufacturing Engineering (ACME) Grantees Conference, Proceedings of the Science and Engineering Research Council (SERC)/Applications of Computers to Manufacturing Engineering (ACME) Grantees Conference, University of Sheffield, Sheffield, UK.

Gao, JX and Case, K (1993) Information mapping between a feature based design system and an integrated process planning system. In Kochar, AK (ed) Thirtieth International MATADOR Conference, Proceedings of the Thirtieth International MATADOR Conference, UMIST, Manchester, UK, pp.551-558, ISBN: 9780333596487.

Case, K, Gao, JX, Gindy, NNZ (1993) Feature validation in a feature-based design system. In Bramley, A and Mileham, A (ed) Ninth National Conference on Manufacturing Research, NCMR 1993, ‘Advances in Manufacturing Technology VII ‘, the Proceedings of the Ninth National Conference on Manufacturing Research, NCMR 1993, University of Bath, Bath, UK, pp.272-276.

Gao, JX, Case, K, Gindy, NNZ (1993) An experimental comparison of a feature based design system and a conventional solid modeller. In Hassard, JS, Forrester, PL, Hawksley, C, Tang, NKH (ed) Proceedings of the International Conference on Managing Integrated Manufacturing: Organisation, Strategy and Technology, Keele University, Keele, UK, pp.339-351.

Chan, AKW and Case, K (1992) A knowledge-based system approach for recognition of machining features. In Ko, NWM and Tan, STE (ed) International Conference on Manufacturing Automation, Proceedings of the International Conference on Manufacturing Automation, Hong Kong, pp.334-342.

Case, K (1992) Features technology: An integration methodology for CAD and CAM. In Ko, NWM and Tan, STE (ed) International Conference on Manufacturing Engineering, Proceedings of the International Conference on Manufacturing Automation, Hong Kong, pp.613-624.

Case, K (1992) Feature-based CAD systems for process capability modelling. In Bruin, D (ed) Congress Internacional de Computação Gráfica, Proceedings of CICOM GRAF 92, Sao Paulo, Brazil, pp.1-14.

Gao, X, Case, K, Gindy, NNZ (1992) A design by features approach to the building of feature data models for process planning. In McGeough, JA (ed) Eighth International Conference on Computer Aided Production Engineering, CAPE '92, Proceedings of the Eighth International Conference on Computer Aided Production Engineering, CAPE ‘92, University of Edinburgh, Edinburgh, UK, pp.45-51.

Gao, JX and Case, K (1991) Process capability modelling: A review report of feature representation methodologies. In Case, K and Gao, JX (ed) Symposium on Feature-based Approaches to Design and Process Planning, Proceedings of the Symposium on Feature-based Approaches to Design and Process Planning, Loughborough University of Technology, Loughborough, UK, pp.1-63.

Weston, RH, Case, K, Moore, PR, Harrison, R (1991) Advanced architecture for universal machine control. In Science and Engineering Research Council (SERC)/Application of Computers to Manufacturing Engineering (ACME) Grantees Conference, Leicester University, Leicester, UK, pp.1-5.

Case, K and Gao, JX (1991) Feature technology - an overview. In Case, K and Gao, JX (ed) Symposium on Feature-based Approaches to Design and Process Planning, Proceedings of the Symposium on Feature-based Approaches to Design and Process Planning, Loughborough University of Technology, Loughborough, UK, pp.1-14.

Case, K and Gao, JX (1991) Feature technology - an overview. In Case, K and Gao, JX (ed) Symposium on Feature-based Approaches to Design and Process Planning, Proceedings of the Symposium on Feature-based Approaches to Design and Process Planning, Loughborough University of Technology, Loughborough, UK, pp.1-14.

Porter, JM, Almeida, GM, Freer, MT, Case, K (1991) The design of supermarket workstations to reduce the incidence of musculo-skeletal discomfort. In Queinnec, Y and Daniellou, F (ed) Eleventh Triennial Congress of the International Ergonomics Association, ‘Designing for Everyone and Everything’, the Proceedings of the Eleventh Triennial Congress of the International Ergonomics Association, Paris, France, pp.1122-1124, ISBN: 9780748400454.

Doyle, R and Case, K (1991) The logical and geometric modelling of a universal machine control reference architecture. In European Engineering Research and Technology Transfer Congress, Eurotech Direct '91, Proceedings of the European Engineering Research and Technology Transfer Congress, Eurotech Direct '91, Birmingham Conference Centre, Birmingham, UK, pp.1-22.

Case, K, Bonney, MC, Porter, JM, Freer, MT (1990) Applications of the SAMMIE CAD system in workplace design. In Haselgrave, CM, Wilson, JR, Corlett, EN, Manenica, I (ed) Third International Occupational Ergonomics Symposium, 'Work Design in Practice', the Proceedings of the Third International Occupational Ergonomics Symposium, Zadar, Yugoslavia, pp.119-127, ISBN: 9780850667707.

Yan, XT, Weston, RH, Case, K (1990) An emulation system for machine design and control. In Eleventh International Conference on Assembly Automation, ‘Creative Manufacturing Engineering Program’, the Proceedings of the Eleventh International Conference on Assembly Automation, Dearborn, Michigan, USA, pp.1-18, ISBN: 978-0872633926.

Wan, AR, Rajesham, S, Case, K (1990) A knowledge-based process planning system for machine shops. In International Conference on Information Technology, ‘IT for Competitive Advantage - Opportunities for Development’, the Proceedings of the International Conference on Information Technology, Kuala Lumpur, Malaysia, pp.1-16.

Weston, RH, Booth, AH, Moore, PR, Harrison, PR, Case, K (1990) A machine control shell for next generation manufacturing machines. In Davies, BJ (ed) Twenty-eighth International MATADOR Conference, Proceedings of the Twenty-eighth International MATADOR Conference, UMIST, Manchester, UK, pp.137-146, ISBN: 0333493478.

Case, K and Acar, BS (1989) The manufacturing features approach to design and its impact on the learning and use of computer aided design systems. In Megaw, ED (ed) Annual Conference of the Ergonomics Society, ‘Contemporary Ergonomics 1989’, Proceedings of the Annual Conference of the Ergonomics Society, University of Reading, Reading, UK, pp.132-137, ISBN: 978-0850664843.

Case, K (1989) Data transfer by CGM files. In Computer Graphics '89, 'Computer Graphics 89', the Proceedings of Computer Graphics 89, Alexandra Palace, London, UK, pp.1-1, ISBN: 9780863531903.

Case, K (1989) Computer graphics metafiles. In Seventh Eurographics UK Conference, University of Manchester, Manchester, UK, pp.1-1.

Acar, BS and Case, K (1989) Attitudes to integrated design and process planning. In Twenty-first International Seminar on Manufacturing Systems, Proceedings of the Twenty-first International Seminar on Manufacturing Systems, Stockholm, Sweden, pp.115-128.

Doyle, R and Case, K (1989) CAE Software in manufacturing engineering education. In Kibby, MR (ed) Computer Aided Learning Symposium, CAL 89, Computer Assisted Learning: Selected Contributions from the CAL'89 Symposium, University of Surrey, Guildford, UK, pp.277-288, ISBN: 9780080402499.

Porter, JM, Case, K, Bonney, MC, Freer, MT (1988) Vehicle design and evaluation using the SAMMIE system. In Adams, AS, Hall, RR, McPhee, BJ, Oxenburgh, MS (ed) Tenth Trienniel Congress of the International Ergonomics Association, 'Designing a Better World', the Proceedings of the Tenth Triennial Congress of the International Ergonomics Association, Sydney, Australia, pp.81-83, ISBN: 9780731641291.

Bonney, MC, Case, K, Porter, JM (1988) Application of SAMMIE and the development of man modelling. In NATO Workshop on Application of Human Performance Models to System Design, Proceedings of the NATO Workshop on Application of Human Performance Models to System Design, Orlando, Florida, USA, pp.1-11.

Case, K (1988) Solid modelling for design and manufacture. In Conference on CAD/CAM Applications in Manufacturing Technology, Kuala Lumpur, Malaysia, pp.1-1.

Case, K (1988) Computer aided design in the context of manufacturing engineering and computer integrated manufacture. In Conference on CAD/CAM Applications in Manufacturing Technology, Kuala Lumpur, Malaysia, pp.1-1.

Case, K, Acar, BS, Hart, NM (1987) Computer aided production engineering linking CAD, process planning and tool design. In Science and Engineering Research Council (SERC)/Applications of Computing in Manufacturing Engineering (ACME) Grantees Conference, Cambridge, UK, pp.1-8.

Case, K, Porter, JM, Bonney, MC (1986) SAMMIE: A computer aided design tool for ergonomists. In Human Factors Society Thirtieth Annual Meeting, 'A Cradle for Human Factors', the Proceedings of the Human Factors Society Thirtieth Annual Meeting, Dayton, Ohio, USA, pp.694-698, ISBN: 978-9996256127.

Acar, BS and Case, K (1986) A CAD system to aid process planning. In Second Machine Design and Manufacture Congress, Ankara, Turkey, pp.1-1.

Acar, BS, Case, K, Bennaton, JA, Hart, NM (1986) Evaluation of a new approach to design and process planning. In Fourth Conference on UK Research in Automated Manufacture, Proceedings of the Fourth Conference on UK Research in Automated Manufacture, London, UK, pp.1-5.

Porter, JM, Case, K, Bonney, MC (1986) SAMMIE: An ergonomics CAD system for vehicle design and evaluation. In Institute of British Carriage and Automobile Manufacturers Conference (BODITEK'86), Keele University, UK, pp.1-13.

Hart, NM, Case, K, Bennaton, JA, Acar, BS (1986) A CAD engineering language to aid manufacture. In McGeough, JA (ed) First International Conference on Computer-Aided Production Engineering, Proceedings of the First International Conference on Computer-Aided Production Engineering, Edinburgh, UK, pp.335-339, ISBN: 9780852986004.

Case, K, Acar, BS, Bennaton, JA, Hart, NM (1985) A system to aid design by planning manufacturing operations. In McGoldrick, PF (ed) First National Conference on Production Research, 'Advanced Manufacturing Technology', the Proceedings of the First National Conference on Production Research, University of Nottingham, Nottingham, UK, pp.1-13, ISBN: 9781850910398.

Case, K (1984) Floodlighting design by CAD. In Third European Conference on CAD/CAM and Computer Graphics, MICAD'84, Proceedings of the Third European Conference on CAD/CAM and Computer Graphics, MICAD'84, Paris, France, pp.449-459, ISBN: 9780850388527.

Case, K, Blunsdon, CA, Austin, K (1982) Computer aids for floodlighting design. In Annual Conference of the Ergonomics Society, Brighton, UK.

Kingsley, EC, Schofield, NA, Case, K (1981) SAMMIE: A computer aid for man machine modelling. In Eighth Annual Conference on Computer Graphics and Interactive Techniques, SIGGRAPH 81, Proceedings of the Eighth Annual Conference on Computer Graphics and Interactive Techniques, SIGGRAPH 81, Dallas, Texas, USA, pp.163-169, ISBN: 0897910451. DOI: 10.1145/965161.806802.

Case, K and Porter, JM (1980) SAMMIE - An ergonomics evaluation system. In Visual Modelling Conference, Sheffield, UK, pp.1-1.

Porter, JM, Case, K, Bonney, MC (1980) A computer generated three dimensional visibility chart. In Oborne, DJ and Levis, JA (ed) Ergonomics Society International Conference on Ergonomics and Transport, 'Human Factors in Transport Research', the Proceedings of the Ergonomics Society Conference on Ergonomics and Transport, Swansea, UK, pp.365-373, ISBN: 9780125238014.

Levis, JA, Smith, JP, Porter, JM, Case, K (1980) The impact of computer aided design on pre-concept package design and evaluation. In Oborne, DJ and Levis, JA (ed) The Ergonomics Society International Conference on Ergonomics and Transport, 'Human Factors in Transport Research', the Proceedings of the Ergonomics Society Conference on Ergonomics and Transport, Swansea, UK, pp.356-364, ISBN: 9780125238014.

Bonney, MC, Case, K, Porter, JM (1980) User needs in computerised man models. In NATO Symposium on Anthropometry and Biomechanics: Theory and Application, Cambridge, UK, pp.1-5.

Bonney, MC, Case, K, Dooner, M, Porter, JM (1980) Using the SAMMIE computer aided design system for workplace design. In Institute of Management Services Summer School, St John's College, Cambridge, UK, pp.1-9.

Case, K (1980) SAMMIE. In Annual Conference of the Ergonomics Society, Nottingham, UK, pp.1-1.

Bonney, MC, Case, K, Porter, JM, Levis, JA (1979) Design of mirror systems for commercial vehicles. In Annual Conference of the Ergonomics Society, Oxford, UK, pp.1-16.

Heginbotham, WB, Dooner, M, Case, K (1979) Rapid assessment of industrial robot performance by interactive computer graphics. In Ninth International Symposium on Industrial Robots, Washington, USA, pp.1-12.

Bonney, MC, Blunsdon, CA, Case, K, Porter, JM (1979) Man-machine interaction in work systems. In Vth International Conference on Production Research, Amsterdam, The Netherlands, pp.1-11.

Bonney, MC and Case, K (1976) The development of SAMMIE for computer aided work place and work task design. In Human Factors and Ergonomics Society Annual Meeting, Proceedings of the Human Factors and Ergonomics Society Annual Meeting, Maryland, USA, pp.340-348, DOI: 10.1177/154193127602001601.

Bonney, MC, Case, K, Hughes, BJ, Kennedy, DN, Williams, RW (1974) Using SAMMIE for computer aided work place and work task design. In Society of Automotive Engineers, (ed) Automotive Engineering Congress and Exposition of the Society of Automotive Engineers, Detroit, USA, pp.1-13.

Bonney, MC, Case, K, Hughes, BJ, Schofield, NA, Williams, RW (1972) Computer aided workplace design using SAMMIE. In Annual Conference of the Ergonomics Research Society, Cardiff, UK, pp.1-13.



Books

Goh, YM and Case, K (ed) (2016) Advances in Manufacturing Technology XXX, IOS Press.

Goh, YM and Case, K (ed) (2016) Advances in Manufacturing Technology XXX, IOS Press.

Case, K and Osborne, WD (2015) XIX Corps Camp Commandant. The Great War Diary of Colonel Alexander Weston Jarvis. Volume II. The Western Front 1917-1919., Salient Books, ISBN: 9780957445970. Full text: http://www.salientbooks.co.uk/ .

Case, K and Osborne, WD (2012) A Great War Sharpshooter. Volume I Norfolk, Egypt and Gallipoli, 1914-1916, Salient Books, ISBN: 9780957445925.

Case, K and Osborne, WD (2010) A Boer War Sharpshooter, Salient Books, ISBN: 978-0-9564439-1-5.

Case, K and Newman, ST (1994) Advances in Manufacturing Technology VIII, CRC, ISBN: 9780748402540.

Case, K and Newman, ST (ed) (1994) Advances in Manufacturing Technology VIII, Taylor and Francis, ISBN: 978-0748402540.



CD Objects

Summerskill, SJ, Marshall, R, Case, K (2010) Potential improvements to the occupant accommodation design process in vehicles using digital human modelling,, ISBN: 978 0 9796435 4 5.

Backstrand, G, Brolin, A, Hogberg, D, Case, K (2010) Supporting attention in manual assembly and its influence on quality,USA Publishing, ISBN: 978 0 9796435 4 5.

Thorvald, P, Hogberg, D, Case, K (2010) Using Mobile Information Sources to Increase Productivity and Quality,USA Publishing.

Backstrand, G, Brolin, A, Hogberg, D, Case, K (2010) Supporting attention in manual assembly and its influence on quality,USA Publishing, ISBN: 978 0 9796435 4 5.

Marshall, R, Summerskill, SJ, Case, K, Gyi, DE, Sims, RE (2010) Development and evaluation of task based digital human modelling for inclusive design,USA Publishing, ISBN: 978 0 9796435 4 5.

Thorvald, P, Högberg, D, Case, K (2009) Incorporating Cognitive Aspects in Digital Human Modelling,Springer Verlag, ISBN: 978 3 642 02884 7.

Case, K, Marshall, R, Högberg, D, Summerskill, SJ, Gyi, DE, Sims, RE (2009) HADRIAN: Fitting trials by digital human modelling,Springer, ISBN: 978-3-642-02808-3.

Marshall, R, Case, K, Summerskill, SJ, Sims, RE, Gyi, DE, Davis, PM (2009) Virtual Task Simulation for Inclusive Design,Springer, ISBN: 978-3-642-02808-3.

Summerskill, SJ, Marshall, R, Case, K, Gyi, DE, Sims, RE, Davis, PM (2009) Validation of the HADRIAN system using an ATM evaluation case study,Springer, ISBN: 978-3-642-02808-3.

Davis, PM, Marshall, R, Case, K, Gyi, DE, Sims, RE, Summerskill, SJ (2009) Stress and Exclusion - principles and tools for inclusive design,, ISBN: 978-1-905000-80-7.

Marshall, R and Case, K (2009) SAMMIE v8.4,.

Thorvald, P, Backstrand, G, Hogberg, D, de Vin, L, Case, K (2008) Information presentation in manual assembly - a cognitive ergonomics analysis,.

Case, K, Porter, JM, Marshall, R, Sims, RE, Summerskill, SJ, Davis, PM (2008) Digital human modelling for virtual fitting trials,.

Summerskill, SJ, Bird, F, Case, K, Porter, JM, Marshall, R (2008) Ergonomic assessment of the driving cabs of railway vehicles,.

Davis, PM, Case, K, Porter, JM, Marshall, R, Gyi, DE, Sims, RE, Summerskill, SJ (2008) The psychological stress perspective - a unifying view of accessibility in public transport and beyond,.

Marshall, R, Summerskill, SJ, Porter, JM, Case, K, Sims, RE, Gyi, DE, Davis, PM (2008) Multivariate design inclusion using HADRIAN,.

Porter, JM, Marshall, R, Sims, RE, Case, K, Gyi, DE (2006) HADRIAN: "I am not a number, I am a free man!",, ISBN: 91-975079-5-4.

Yusof, Y, Rosso Jr, RSU, Case, K, Newman, ST (2006) The design of a STEP-NC compliant CAD/CAP/CAM system for the manufacture of rotational parts on a CNC turning centre,in 'Innovations in Manufacturing',.

Bäckstrand, G, De Vin, LJ, Högberg, D, Case, K (2006) Attention, Interpreting, Decision-making and acting in manual assembly, in Innovations in Manufacturing,.

Bäckstrand, G, Högberg, D, De Vin, LJ, Case, K, Piamonte, P (2006) Ergonomics Analysis in a Virtual Environment,.

Yusof, Y, Case, K, Newman, ST (2006) Machining of rotational asymmetric components with a single turning centre,, ISBN: 0-7918-3779-3.

Marshall, R and Case, K (2006) SAMMIE v8.3,SAMMIE CAD Ltd.

Porter, JM, Marshall, R, Sims, RE, Gyi, DE, Case, K (2006) HADRIAN gets streetwise,Elsevier Ltd.

Marshall, R and Case, K (2003) SAMMIE v8.2,.

Goonetilleke, TS, Case, K, Marshall, R, Porter, JM, Gyi, DE, Sims, RE (2003) In search of Design Synthesis by linking Ergonomic Evaluation and Constraint Modelling to attain Design for All,, ISBN: 1-874175-942.

Marshall, R and Case, K (2003) SAMMIE v8.0,.

Porter, JM, Marshall, R, Sims, RE, Gyi, DE, Case, K (2003) HADRIAN: a human modelling CAD tool to promote "design for all",Royal College of Art, London, ISBN: 1 874175 94 2.

Högberg, D and Case, K (2002) Supporting 'Design for All' in Automotive Ergonomics,The International Society for Occupational Ergonomics & Safety, Virginia, USA.

Sims, RE, Marshall, R, Gyi, DE, Porter, JM, Case, K (2002) Collection of design data from older and disabled people,International Society for Occupational Ergonomics and Safety CD-ROM.

Porter, JM, Case, K, Gyi, DE, Marshall, R (2002) How can we "design for all" if we do not know who is designed out and why?,International Society for Occupational Ergonomics and Safety CD-ROM.

Gyi, DE, Porter, JM, Case, K (2000) Design practice and 'designing for all',Human Factors and Ergonomics Society.

Case, K, Porter, JM, Xiao, DC, Gyi, DE (1999) Shadow-scanned Human Models for Car Seating Design,Universitat Politecnica de Catalunya, ISBN: 84 699 0852 9.



Chapters

Hussein, A, Case, K, Chatha, KA, Imran, S, Imran, M, Masood, T (2014) Organizational design: Need for a socio-technical inclusive system design approach to meet 21st century workforce challenges. In Advances in Social and Organizational Factors, CRC Press, pp.441-449, ISBN: 978-1-4951-2102-9.

Yusof, Y and Case, K (2009) A STEP compliant approach to turning operations. In Xu, X and Nee, AYC (ed) Series in Advanced Manufacturing. Advanced Design and Manufacturing based on STEP, Springer, pp.105-124, ISBN: 978-1-84882-738-7. Full text: http://dx.doi.org/10.1007/978-1-84882-739-4_5. DOI: 10.1007/978-1-84882-739-4_5.

Porter, JM, Marshall, R, Case, K, Gyi, DE, Sims, RE, Summerskill, SJ (2009) Inclusive design for the mobility impaired. In Duffy, VG (ed) Handbook of Digital Human Modelling: Research for Applied Ergonomics and Human Factors, CRC Press, pp.41.1-41.13, ISBN: 978-0-8058-5646-0. DOI: 10.1201/9781420063523.ch41.

Porter, JM, Marshall, R, Freer, M, Case, K (2004) SAMMIE: A computer aided ergonomics design tool. In Delleman, NJ, Haslegrave, CM, Chaffin, DB (ed) Working Postures and Movements, Tools for Evaluation and Engineering, CRC Press, pp.454-470, ISBN: 978-0415279086.

Porter, JM, Case, K, Freer, M (1999) Computer aided design and human models. In Karwowski, W and Marras, WE (ed) Handbook of Occupational Ergonomics, CRC Press, pp.479-500, ISBN: 9780849326417.

Porter, JM, Freer, MT, Case, K, Bonney, MC (1995) Computer aided ergonomics and workspace design. In Wilson, JR and Corlett, EN (ed) Evaluation of Human Work, Taylor & Francis, pp.574-620, ISBN: 07484 0084 2.

Porter, JM, Case, K, Freer, MT, Bonney, MC (1993) Computer aided ergonomics design of automobiles. In Peacock, B and Karwowski, WE (ed) Automotive Ergonomics, Taylor and Francis, pp.43-77, ISBN: 9780748400058.

Case, K, Porter, JM, Bonney, MC (1990) SAMMIE: A man and workplace modelling system. In Karwowski, W, Genaidy, AM, Asfour, SS (ed) Computer-Aided Ergonomics, Taylor & Francis, pp.31-56, ISBN: 978-0850667530.

Porter, JM, Case, K, Bonney, MC (1990) Computer workspace modelling. In Wilson, JR and Corlett, EN (ed) Evaluation of Human Work, CRC Press, pp.472-499, ISBN: 9780850664799.

Bonney, MC, Case, K, Porter, JM (1989) Application of SAMMIE and the development of man modelling. In McMillan, GR, Beevis, D, Salas, E, Strub, MH, Sutton, R, Van Breda, L (ed) Applications of Human Performance Models to System Design, Plenum Publishing Corp, pp.341-351, ISBN: 9780306432422.

Bonney, MC, Taylor, N, Case, K (1989) Using CAD and expert systems for human workplace design. In Woodwark, J (ed) Geometric Reasoning, Oxford University Press, pp.269-282, ISBN: 978-0198537380.

Bonney, MC, Case, K, Porter, JM (1982) User needs in computerised man models. In Easterby, RS, Kroemer, KHE, Chaffin, DB (ed) Anthropometry and Biomechanics, Theory and Application. NATO Conference Series III Human Sciences, Plenum Press, pp.97-101, ISBN: 9780306407451.



School/Dept Working Papers

Case, K, Acar, BS, Porter, JM (1996) Spine modelling: A tool for safe to use equipment design.

Case, K, Gyi, DE, Porter, JM, Xiao, DC (1995) Ergonomics and postural comfort. Advanced technologies for automobile seat evaluation and design (SED).



Other

Goh, YM and Case, K (2017) Editorial. DOI: 10.1080/21693277.2017.1380254.

Heginbotham, WB, Dooner, M, Case, K (2012) Robot Application Simulation.

Marshall, R and Case, K (2009) SAMMIE v8.4, Human Modelling Software.

Porter, S, Case, K, Summerskill, SJ, Marshall, R (2009) Four decades of SAMMIE.

Marshall, R, Porter, JM, Case, K, Gyi, DE, Sims, RE, Summerskill, SJ (2007) HADRIAN: Supporting design for all, Invited paper for the annual edition of Design for All. Full text: http://www.designforall.in/annual.pdf .

Marshall, R and Case, K (2003) SAMMIE v8.2, Human Modelling Software.

Marshall, R and Case, K (2003) SAMMIE v8.0, Human Modelling Software.

Porter, JM and Case, K (1994) Advanced technologies for automobile seat evaluation and design (SED), Interim Report on Project BREZ.CT92.0246.

Gindy, NNZ and Case, K (1994) Process capability models for design and selection of processing equipment.

Case, K (1994) Electronic Displays (S. Sherr). DOI: 10.1142/S0960313194000298.

Case, K (1994) Principles of robot modelling and simulation (S.M. Megahad). DOI: 10.1080/00207549408956965.

Case, K (1994) "Design for manufacturability: A systems approach to concurrent engineering and ergonomics (Eds. M. Helander and N. Nagamachi).

Case, K and Gindy, NNZ (1993) International Journal of Computer Integrated Manufacture, Special Issue: Features.

Case, K and Gindy, NNZ (1991) Future directions in features research.

Case, K (1988) Software for discrete manufacturing (J P Crestin and J F Walters). DOI: 10.1080/00207548808947967.

Case, K (1987) CAD - technical trends.

Case, K (1986) Human factors in computer-aided design (A Majchrzak, T C Chang, W Barfield, E Eberts and G Salvendy). DOI: 10.1080/00207548808947945.

Case, K (1986) Computer aided electronic engineering (W P O'Reilly).

Case, K (1985) Contemporary Ergonomics 1984 (ed. E D Megaw) and Contemporary Ergonomics 1985 (ed. D J Oborne). DOI: 10.1080/00207548508928076.

Case, K (1984) Effective CADCAM. Engineering and Manufacturing Industries Division of the Institute of Mechanical Engineers. DOI: 10.1080/00207548408942490.

Case, K (1984) A new technique of job analysis (W Rohmert and K Landau). DOI: 10.1080/00207548408942476.

Case, K and Porter, JM (1980) SAMMIE.

Bonney, MC, Porter, JM, Case, K (1980) SAMMIE - Computer aided ergonomic workplace design system.

Case, K and Porter, JM (1980) SAMMIE can cut out the prototypes in ergonomic design.

Case, K and Porter, JM (1980) SAMMIE. A computer aided ergonomics design system.

Heginbotham, WB, Dooner, M, Case, K (1979) Assessing robot performance with interactive computer graphics.

Bonney, MC and Case, K (1978) SAMMIE computer aided work place and work task design system.



Reports

Stepney, PD, Acar, BS, Case, K, Porter, JM (1997) Solid modelling of the spine, Final Report for the Research Committee of Loughborough University.

Case, K (1993) Gestural input for conceptual design, The Application of Computers to Manufacturing Engineering (ACME) Directorate of the Science and Engineering Research Council (SERC).

Williams, DJ and Case, K (1993) Infrastructure support for computer integrated manufacture, p.8, The Application of Computers to Manufacturing Engineering (ACME) Directorate of the Science and Engineering Research Council (SERC).

Weston, RH, Moore, PR, Harrison, R, Case, K (1992) Advanced architecture for universal machine control, The Application of Computers to Manufacturing Engineering (ACME) Directorate of the Science and Engineering Research Council (SERC).



Software

Marshall, R and Case, K (2013) SAMMIE, SAMMIE CAD Ltd.

Marshall, R and Case, K (2009) SAMMIE, SAMMIE CAD Ltd..

Marshall, R and Case, K (2006) SAMMIE, SAMMIE CAD Ltd.

Marshall, R and Case, K (2003) SAMMIE, SAMMIE CAD Ltd.

Marshall, R and Case, K (2003) SAMMIE, SAMMIE CAD Ltd.



Getting in touch

Research Office
Loughborough University
Loughborough
Leicestershire
LE11 3TU
researchpolicy@lboro.ac.uk
+44 (0)1509 222453

Institutional Repository
Pilkington Library
Loughborough University
Loughborough
LE11 3TU
repository@lboro.ac.uk
+44 (0)1509 223993