Journal Articles

Claybrook, F, Southee, D, Mohammed, M (2024) Mechanical evaluation of elastomeric thermoplastic polyurethane additively manufactured triply periodic minimal surface area lattice structures for adjustable cushioning properties, Rapid Prototyping Journal, ISSN: 1355-2546. DOI: 10.1108/rpj-08-2023-0299.

Luís, P, Southee, D, Weaver, G, Wijayantha, U (2023) Synergistic combination of carbon conductive and flexural additives for flexible screen-printed supercapacitor electrodes, Carbon Trends, 12, 100287, DOI: 10.1016/j.cartre.2023.100287.

Serobaba-Soares-Luis, P, Southee, D, Weaver, G, Wijayantha, U (2023) Novel approach to utilise highly conductive but electrochemically unstable current collector materials in textile supercapacitor electrodes, Flexible and Printed Electronics, 8(2), 025007, DOI: 10.1088/2058-8585/accf26.

Cicek, U, Southee, D, Johnson, A (2023) 2D characterisation and evaluation of multi-material structures towards 3D hybrid printing, Virtual and Physical Prototyping, 18(1), e2181193, ISSN: 1745-2759. DOI: 10.1080/17452759.2023.2181193.

Howard, N, Archer, A, Sibley, D, Southee, D, Wijayantha-Kahagala-Gamage, U (2023) Surfactant control of coffee ring formation in carbon nanotube suspensions, Langmuir, 39(3), pp.929-941, ISSN: 0743-7463. DOI: 10.1021/acs.langmuir.2c01691.

Claybrook, F, Mohammed, M, Southee, D (2022) Investigation of additive manufactured Split P TPMS elastomeric structures for diabetic foot insoles, Transactions on Additive Manufacturing Meets Medicine, 4(1), pp.664-664, DOI: 10.18416/AMMM.2022.2209664.

Cicek, U, Southee, D, Johnson, A (2022) Assessing the stab resistive performance of material extruded body armour specimens, International Journal of Protective Structures, 14(3), pp.335-356, ISSN: 2041-4196. DOI: 10.1177/20414196221112148.

McGhee, J, Sagu, J, Southee, D, Evans, PSA, Wijayantha-Kahagala-Gamage, U (2020) Ferrite-based room temperature negative temperature coefficient printed thermistors, Electronics Letters, 56(24), pp.1322-1324, ISSN: 0013-5194. DOI: 10.1049/el.2020.2158.

McGhee, J, Sagu, J, Southee, D, Evans, PSA, Wijayantha-Kahagala-Gamage, U (2020) Printed, fully metal oxide, capacitive humidity sensors using conductive indium tin oxide inks, ACS Applied Electronic Materials, 2(11), pp.3593-3600, ISSN: 2637-6113. DOI: 10.1021/acsaelm.0c00660.

Middlemiss, R, McGhee, J, Southee, D, Evans, P, Wijayantha, U (Accepted for publication) Printed resistors for flexible electronics – Thermal variance mitigation and tolerance improvement via oxide-metal coatings, Engineering Research Express, DOI: 10.1088/2631-8695/abbae0.

McGhee, J, Goulas, A, Southee, D, Sagu, J, Engstrom, D, Wang, J, Hutt, D, Evans, P, Zhou, Z, Wijayantha-Kahagala-Gamage, U, Conway, P, Carmalt, C (2020) Indium tin oxide nanowires manufactured via printing and laser irradiation, Applied Materials Today, 21, 100835, ISSN: 2352-9407. DOI: 10.1016/j.apmt.2020.100835.

McGhee, J, Sagu, J, Southee, D, Wijayantha-Kahagala-Gamage, U (2018) Humidity sensing properties of transparent sputter-coated indium-tin oxide and printed polymer structures, IEEE Sensors Journal, 18(18), pp.7358-7364, ISSN: 1530-437X. DOI: 10.1109/JSEN.2018.2858021.

McGhee, J, Sinclair, M, Southee, D, Wijayantha-Kahagala-Gamage, U (2018) Strain sensing characteristics of 3D-printed conductive plastics, Electronics Letters, ISSN: 0013-5194. DOI: 10.1049/el.2018.0363.

Self, J, Evans, M, Jun, GT, Southee, D (2018) Interdisciplinary: challenges and opportunities for design education, International Journal of Technology and Design Education, 29(4), pp.843-876, ISSN: 0957-7572. DOI: 10.1007/s10798-018-9460-5.

Jayathilake, DSYS, Peiris, N, Sagu, J, Potter, DB, Wijayantha-Kahagala-Gamage, U, Carmalt, CJ, Southee, D (2017) Microwave-assisted synthesis and processing of Al-Doped, Ga-Doped, and Al, Ga Codoped ZnO for the pursuit of optimal conductivity for transparent conducting film fabrication, ACS Sustainable Chemistry & Engineering, 5(6), pp.4820-4829, ISSN: 2168-0485. DOI: 10.1021/acssuschemeng.7b00263.

Privitera, M, Evans, M, Southee, D (2017) Human factors in the design of medical devices – approaches to meeting international standards in the European Union and USA, Applied Ergonomics: human factors in technology and society, 59 Part A, pp.251-263, ISSN: 0003-6870. DOI: 10.1016/j.apergo.2016.08.034.

York, N, Southee, D, Evans, M (2017) The future of product design utilising printed electronics, Design and Technology Education Journal, ISSN: 1360-1431.

Ghanizadeh, S, Peiris, N, Jayathilake, DSYS, Hutt, D, Wijayantha-Kahagala-Gamage, U, Southee, D, Conway, P, Marchand, P, Darr, JA, Parkin, IP, Carmalt, CJ (2016) Dispersion and microwave processing of nano-sized ITO powder for the fabrication of transparent conductive oxides, Ceramics International, 42(16), pp.18296-18302, ISSN: 0272-8842. DOI: 10.1016/j.ceramint.2016.08.157.

Zhang, R, Xu, Y, Harrison, D, Fyson, J, Southee, D (2016) A Study of the Electrochemical Performance of Strip Supercapacitors under Bending Conditions, International Journal of Electrochemical Science, pp.7922-7933, DOI: 10.20964/2016.09.59.

Peiris, N, Ghanizadeh, S, Jayathilake, DSY, Hutt, DA, Wijayantha Kahagala Gamage, U, Conway, PP, Southee, DJ, Parkin, IP, Marchand, P, Darr, JA, Carmalt, CJ (2016) Aerosol-assisted fabrication of tin-doped indium oxide ceramic thin films from nanoparticle suspensions, Journal of Materials Chemistry C, pp.1-8, ISSN: 2050-7534. DOI: 10.1039/c6tc00812g.

Zhang, RR, Xu, Y, Harrison, D, Fyson, J, Southee, DJ, Qiu, F (2015) Flexible strip supercapacitors for future energy storage, International Journal of Automation and Computing, 12(1), pp.43-49, ISSN: 1476-8186. DOI: 10.1007/s11633-014-0866-6.

Bingham, G, Southee, D, Page, T (2015) Meeting the expectation of industry: an integrated approach for the teaching of mechanics and electronics to design students, European Journal of Engineering Education, ISSN: 0304-3797. DOI: 10.1080/03043797.2014.1001813.

Sagu, J, York, N, Southee, D, Wijayantha-Kahagala-Gamage, U (2015) Printed electrodes for flexible, light-weight solid-state supercapacitors - a feasibility study, CIRCUIT WORLD, 41(2), pp.80-86, ISSN: 0305-6120. DOI: 10.1108/CW-01-2015-0004.

Lou, K, Southee, D, Bohemia, E (2015) Designer-led NPD implementation issues in Chinese SMEs, Symphonya. Emerging Issues in Management, ISSN: 1593-0319. DOI: 10.4468/2015.2.07lou.southee.bohemia.

Zhang, R, Xu, Y, Harrison, DJ, Fyson, J, Southee, D (2015) Experimental design to optimise electrical performance of strip supercapacitors, International Journal of Electrochemical Science, 11(1), pp.675-684, ISSN: 1452-3981.

Zhang, R, Xu, Y, Harrison, D, Fyson, J, Southee, D, Tanwilaisiri, A (2015) Fabrication and characterization of smart fabric using energy storage fibres, Systems Science & Control Engineering, 3(1), pp.391-396, DOI: 10.1080/21642583.2015.1049717.

Green, S, Southee, DJ, Boult, J (2014) Towards a Design Process Ontology, The Design Journal, 17(4), pp.515-537, DOI: 10.2752/175630614X14056185480032.

Harrison, D, Qiu, F, Fyson, J, Xu, Y, Evans, P, Southee, D (2013) A coaxial single fibre supercapacitor for energy storage, Phys. Chem. Chem. Phys, 15, pp.12215-12219, DOI: 10.1039/C3CP52036F.

Hay, GI, Southee, DJ, Evans, PSA, Harrison, DJ, Simpson, GB, Wood, J (2009) A time-strain monitoring system fabricated via offset lithographic printing, Smart Materials and Structures, 18(1), p.015015, ISSN: 1361-665X. DOI: 10.1088/0964-1726/18/1/015015.

Lazarevic, L, Harrison, DJ, Southee, DJ, Wade, M, Osmond, J (2008) Wind farm and fauna interaction: detecting bird and bat wing beats through cyclic motion analysis, International Journal of Sustainable Engineering, 1(1), pp.60-68, ISSN: 1939-7046. DOI: 10.1080/19397030802221273.

Southee, DJ, Hay, GI, Evans, PS, Harrison, DJ (2008) Flexible dot-matrix display manufacture by offset lithography, Proceedings of the Institution of Mechanical Engineers, Part B. Journal of Engineering Manufacture, 222(8), pp.943-948.

Young, RJH, Evans, PSA, Hay, GI, Southee, DJ, Harrison, DJ (2008) Electroluminescent light sources via soft lithography, Circuit World, 34(3), pp.9-12, ISSN: 0305-6120. DOI: 10.1108/03056120810896218.

Silver, J, Withnall, R, Fern, GR, Marsh, PJ, Ireland, TG, Harris, PG, Evans, PSA, Southee, DJ, Hay, GI, Harrison, DJ, Breen, KFB (2008) The fabrication of miniaturised electrode circuitry by offset lithographic printing for novel electroluminescent displays, Chinese Journal of Electron Devices, (1), ISSN: 1005-9490.

Southee, DJ, Hay, GI, Evans, PSA, Harrison, DJ (2007) Lithographically printed voltaic cells - a feasibility study, Circuit World, 33(1), pp.31-35, ISSN: 0305-6120. DOI: 10.1108/03056120710723698.

Ramsey, BJ, Harrison, DJ, Southee, DJ (2007) Characterisation of the lithographic printing of conducting films, TAGA Journal of Graphic Technology, 4, pp.24-34.

Hay, GI, Southee, DJ, Evans, PSA, Harrison, DJ, Simpson, G, Ramsey, BJ (2007) Examination of silver-graphite lithographically printed resistive strain sensors, Sensors and Actuators (A), 135, pp.534-546, ISSN: 0924-4247.

Withnall, R, Silver, J, Fern, GR, Marsh, PJ, Ireland, TG, Evans, PSA, Southee, DJ, Hay, GI, Harrison, DJ, Breen, KFB (2006) Low cost, flexible electroluminescent displays with a novel electrode architecture printed by offset lithography, Digest of Technical Papers - SID International Symposium, 37(3), pp.1466-1469, ISSN: 0097-966X.

Hay, GI, Evans, PSA, Simpson, G, Harrey, PM, Southee, DJ, Harrison, DJ (2005) Characterization of lithographically printed resistive strain gauges, IEEE Sensors Journal, 5(5), pp.864-871, DOI: 10.1109/JSEN.2005.845209.

Conferences

Claybrook, F, Southee, D, Mohammed, M (Accepted for publication) Additive manufacturing of person specific diabetic foot insoles with adjustable cushioning properties using TPMS lattice structures. In Beaman, J (ed) Solid Freeform Fabrication 2023: Proceedings of the 34th Annual International: Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference; Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, Texas, USA.

Claybrook, F, Mohammed, M, Southee, D (2022) Investigation of additive manufactured Split P TPMS elastomeric structures for diabetic foot insoles. In Transactions on Additive Manufacturing Meets Medicine, Lübeck, Germany. DOI: 10.18416/AMMM.2022.2209664.

Carelli, A, Sinclair, M, Southee, D (2019) Short paper: initial recommendations for the design of privacy management tools for smartphones. In Lamas, D, Loizides, F, Nacke, L, Petrie, H, Winckler, M, Zaphiris, P (ed) IFIP Conference on Human-Computer Interaction; Human-Computer Interaction – INTERACT 2019, Paphos, Cyprus, pp.486-496, ISBN: 9783030293864. DOI: 10.1007/978-3-030-29387-1_28.

McGhee, J, Middlemiss, R, Southee, D, Wijayantha-Kahagala-Gamage, U, Evans, PSA (2018) Flexible, all metal-oxide capacitors for printed electronics. In 2018 IEEE 13th Nanotechnology Materials and Devices Conference (NMDC), Portland, Oregon, USA,ISBN: 9781538610169. DOI: 10.1109/NMDC.2018.8605872.

York, N, Southee, D, Evans, M (2016) The future of product design utilising printed electronics. In DRS 2016: Future-Focused Thnking, Brighton UK. DOI: 10.21606/drs.2016.151.

Zhang, R, Xu, Y, Harrison, D, Fyson, J, Southee, D, Tanwilaisiri, A (2015) A study of the performance of the combination of energy storage fibres. In , 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. DOI: 10.1109/IConAC.2015.7313975.

York, N, Southee, DJ, Evans, MA (2015) Printed electronics, product design and the education of future industrial designers. In International Conference on Engineering and Product Design Education, Loughborough, UK.

Privitera, M-B, Evans, MA, Southee, DJ (2015) Collaborative design process in medical device design. In 11th European Academy of Design Conference, Paris, France.

Southee, D (2015) Great expectations: Design teaching, research & enterprise. In , Proceedings of the 17th International Conference on Engineering and Product Design Education: Great Expectations: Design Teaching, Research and Enterprise, E and PDE 2015, pp.XVII-XIX.

Southee, D (2015) What are design and technology for?. In , Proceedings of the 17th International Conference on Engineering and Product Design Education: Great Expectations: Design Teaching, Research and Enterprise, E and PDE 2015, pp.363-368.

Zhang, R, Xu, Y, Harrison, D, Fyson, J, Southee, D, Tanwilaisiri, A (2014) Fabrication and characterisation of energy storage fibres. In , ICAC 2014 - Proceedings of the 20th International Conference on Automation and Computing: Future Automation, Computing and Manufacturing, pp.228-230, DOI: 10.1109/IConAC.2014.6935491.

Ke Lou, Southee, DJ, Bohemia, E (2013) A conceptual designer-led New Product Development process model for Chinese SMEs. In 2013 IEEE Tsinghua International Design Management Symposium (TIDMS), 2013 IEEE Tsinghua International Design Management Symposium, pp.200-211, DOI: 10.1109/tidms.2013.6981238.

Bingham, G, Southee, D, Page, T (2013) An Integrated Approach for the Teaching of Mechanics and Electronics in a Design Context. In International Conference on Engineering and Product Design Education, Dublin, Ireland, pp.170-175.

Zhang, R, Xu, Y, Harrison, D, Fyson, J, Qiu, F, Southee, D (2013) A study of flexible supercapacitors for future energy storage. In , ICAC 2013 - Proceedings of the 19th International Conference on Automation and Computing: Future Energy and Automation, pp.87-90.

Southee, D (2009) Anonymous marking in design - How does that work?. In , DS 59: Proceedings of E and PDE 2009, the 11th Engineering and Product Design Education Conference - Creating a Better World, pp.182-186.

Southee, DJ, Hay, G, Evans, P, Harrison, D (2008) Lithographically printed integrated electronics. In Photovoltaics Beyond Conventional Silicon, 17-18 June, IDTechEx, Hyatt Tech Centre, Denver, Colorado, USA.

Jenkins, K, Wood, J, Southee, DJ, Harrison, DJ, Stanton, NA (2007) Augmented paper applications: Initial user tests of a wireless pattern reader. In Proceedings of the 2nd International Workshop on Collaborating over Paper and Digital Documents, 9th November, COPADD 2007, Institute of Physics, London, pp.31-34.

Silver, J, Withnall, R, Fern, GR, Marsh, PJ, Ireland, TG, Harris, PG, Psa, E, Southee, DJ, Hay, G, Harrison, DJ (2007) The fabrication of miniaturized electrode circuitry by offset lithographic printing for novel electroluminescent displays. In Asia Display 2007 International Conference, 12-16 Mar, AD'07, Shanghai, Peoples Republic of China, pp.128-133.

Withnall, R, Silver, J, Fern, GR, March, PJ, Ireland, T, Evans, PSA, Southee, DJ, Hay, GI, Harrison, DJ, Breen, KFB (2006) Low cost, flexible electroluminescent displays with a novel electrode architecture printed by offset lithography. In SID International Symposium 2006, 4-6 June, 44th International Symposium, San Francisco, California, USA, pp.1491-1494.

Southee, DJ, Hay, GI, Evans, PSA, Harrison, DJ (2006) Development and characterisation of lithographically printed voltaic cells. In IEEE proceedings, (Electronics Systemintegration Technology Conference) 5-7 September, 1st ESTC, Dresden, pp.1286-1291, ISBN: 1-4244-0552-1. DOI: 10.1109/ESTC.2006.280177.

Southee, DJ, Henry, J, Perry, G (2005) Osama seeker. In Proceedings of the Symposium on Robotics, Mechatronics and Animatronics in the Creative and Entertainment Industries and Arts, 12-15 April, AISB 05, University of Hertfordshire, Hatfield, UK, pp.53-57.

Hay, GI, Evans, PSA, Harrison, DJ, Southee, DJ, Simpson, G, Harrey, PM (2003) Conductive lithographic film fabricated resistive strain gauges. In Proceedings of 2nd IEEE International Conference on Sensors, 22-24 Oct. 2003, IEEE, Toronto, Canada, pp.248-252, ISBN: 0-7803-8133-5. DOI: 10.1109/ICSENS.2003.1278937.

Books

Bingham, G, Southee, DJ, McCardle, J, Kovacevic, A, Bohemia, E, Parkinson, B (ed) (2015) The 17th International Conference on Engineering & Product Design Education Great Expectations: Design Teaching, Research & Enterprise, The Design Society, ISBN: 978-1-904670-62-9.

Datasets

Howard, N, Archer, A, Sibley, D, Southee, D, Wijayantha-Kahagala-Gamage, U (2023) Supplementary information files for: Surfactant control of coffee ring formation in carbon nanotube suspensions, DOI: 10.17028/rd.lboro.21904368.

Other

(2018) printing conductive plastics. DOI: 10.1049/el.2018.1186.