Journal Articles

Habibi, A, Bamshad, O, Golzary, A, Buswell, R, Osmani, M (2023) Biases in life cycle assessment of circular concrete, Renewable and Sustainable Energy Reviews, 192, 114237, ISSN: 1364-0321. DOI: 10.1016/j.rser.2023.114237.

Watson, S, Crawley, J, Lomas, K, Buswell, R (2023) Predicting future GB heat pump electricity demand, Energy and Buildings, 286, 112917, ISSN: 0378-7788. DOI: 10.1016/j.enbuild.2023.112917.

Buswell, R (2022) CCR digital concrete 2022 SI: Editorial, Cement and Concrete Research, 159, 106839, ISSN: 0008-8846. DOI: 10.1016/j.cemconres.2022.106839.

Roussel, N, Buswell, R, Ducoulombier, N, Ivanova, I, Kolawole, J, Lowke, D, Mechtcherine, V, Mesnil, R, Perrot, A, Pott, U, Reiter, L, Stephan, D, Wangler, T, Wolfs, R, Zuo, W (2022) Assessing the fresh properties of printable cement-based materials: High potential tests for quality control, Cement and Concrete Research, 158(2022), 106836, ISSN: 0008-8846. DOI: 10.1016/j.cemconres.2022.106836.

Alanazi, N, Kolawole, J, Buswell, R, Susmel, L (2022) The Theory of Critical Distances to assess the effect of cracks/manufacturing defects on the static strength of 3D-printed concrete, Engineering Fracture Mechanics, 269(2022), 108563, ISSN: 0013-7944. DOI: 10.1016/j.engfracmech.2022.108563.

Buswell, R, Xu, J, De-Becker, D, Dobrzanski, J, Provis, J, Kolawole, J, Kinnell, P (2022) Geometric quality assurance for 3D concrete printing and hybrid construction manufacturing using a standardised test part for benchmarking capability, Cement and Concrete Research, 156, 106773, ISSN: 0008-8846. DOI: 10.1016/j.cemconres.2022.106773.

Ma, G, Buswell, R, da Silva, WRL, Wang, L, Xu, J, Jones, SZ (2022) Technology readiness: A global snapshot of 3D concrete printing and the frontiers for development, Cement and Concrete Research, 156, 106774, ISSN: 0008-8846. DOI: 10.1016/j.cemconres.2022.106774.

Dobrzanski, J, Buswell, R, Pialarissi-Cavalaro, S, Kinnell, P, Wang, W, Xu, J, Kolawole, J (2021) Milling a cement-based 3D printable mortar in its green state using a ball-nosed cutter, Cement and Concrete Composites, 125, 104266, ISSN: 0958-9465. DOI: 10.1016/j.cemconcomp.2021.104266.

Wang, L, Ma, G, Liu, T, Buswell, R, Li, Z (2021) Interlayer reinforcement of 3D printed concrete by the in-process deposition of U-nails, Cement and Concrete Research, 148, ISSN: 0008-8846. DOI: 10.1016/j.cemconres.2021.106535.

Marini, D, Buswell, R, Hopfe, C (2021) Development of a dynamic analytical model for estimating waste heat from domestic hot water systems, Energy and Buildings, 247, 111119, ISSN: 0378-7788. DOI: 10.1016/j.enbuild.2021.111119.

Mechtcherine, V, Buswell, R, Kloft, H, Bos, FP, Hack, N, Wolfs, R, Sanjayan, J, Nematollahi, B, Ivaniuk, E, Neef, T (2021) Integrating reinforcement in digital fabrication with concrete: A review and classification framework, Cement and Concrete Composites, 119, ISSN: 0958-9465. DOI: 10.1016/j.cemconcomp.2021.103964.

Watson, SD, Lomas, KJ, Buswell, RA (2021) How will heat pumps alter national half-hourly heat demands? Empirical modelling based on GB field trials, Energy and Buildings, 238, pp.110777-110777, ISSN: 0378-7788. DOI: 10.1016/j.enbuild.2021.110777.

Xu, J, Buswell, R, Kinnell, P, Biro, I, Hodgson, J, Konstantinidis, N, Ding, L (2020) Inspecting manufacturing precision of 3D printed concrete parts based on geometric dimensioning and tolerancing, Automation in Construction, 117(September 2020), 103233, ISSN: 0926-5805. DOI: 10.1016/j.autcon.2020.103233.

Buswell, R, da Silva, WRL, Bos, FP, Schipper, HR, Lowke, D, Hack, N, Kloft, H, Mechtcherine, V, Wangler, T, Roussel, N (2020) A process classification framework for defining and describing Digital Fabrication with Concrete, Cement and Concrete Research, 134, 106068, ISSN: 0008-8846. DOI: 10.1016/j.cemconres.2020.106068.

Vivancos, JL, Buswell, R, Cosar-Jorda, P, Aparicio-Fernández, C (2020) The application of quality control charts for identifying changes in time-series home energy data, Energy and Buildings, 215, ISSN: 0378-7788. DOI: 10.1016/j.enbuild.2020.109841.

Marini, D, Buswell, RA, Hopfe, CJ (2019) Sizing domestic air-source heat pump systems with thermal storage under varying electrical load shifting strategies, Applied Energy, 255, pp.113811-113811, ISSN: 0306-2619. DOI: 10.1016/j.apenergy.2019.113811.

Aparicio-Fernández, C, Vivancos, J-L, Cosar-Jorda, P, Buswell, R (2019) Energy modelling and calibration of building simulations: a case study of a domestic building with natural ventilation, Energies, 12(17), 3360, DOI: 10.3390/en12173360.

Cosar-Jorda, P, Buswell, RA, Mitchell, VA (2019) Quantifying energy demand reduction considering householder willingness to apply measures, Building Research & Information, 47(7), pp.850-864, ISSN: 0961-3218. DOI: 10.1080/09613218.2019.1630245.

Watson, S, Lomas, K, Buswell, R (2018) Decarbonising domestic heating: what is the peak GB demand?, Energy Policy, ISSN: 0301-4215. DOI: 10.1016/j.enpol.2018.11.001.

Cosar-Jorda, P, Buswell, R, Mitchell, V (2018) Determining of the role of ventilation in residential energy demand reduction using a heat-balance approach, Building and Environment, 144, pp.508-518, ISSN: 0360-1323. DOI: 10.1016/j.buildenv.2018.08.053.

Buswell, RA, Leal de Silva, WR, Jones, SZ, Dirrenberger, J (2018) 3D printing using concrete extrusion: A roadmap for research, Cement and Concrete Research, 112, pp.37-49, ISSN: 0008-8846. DOI: 10.1016/j.cemconres.2018.05.006.

Buswell, R, Webb, L, Mitchell, V, Mackley, KL (2017) Multidisciplinary research: should effort be the measure of success?, Building Research and Information: the international journal of research, development and demonstration, ISSN: 0182-3329. DOI: 10.1080/09613218.2016.1194601.

Buswell, RA (2016) Estimating uncertainty when using transient data in steady-state calculations, Measurement: Journal of the International Measurement Confederation, 94, pp.273-283, ISSN: 0263-2241. DOI: 10.1016/j.measurement.2016.07.084.

Wang, M, Wright, J, Brownlee, A, Buswell, R (2016) A comparison of approaches to stepwise regression on variables sensitivities in building simulation and analysis, Energy and Buildings, 127, pp.313-326, ISSN: 0378-7788. DOI: 10.1016/j.enbuild.2016.05.065.

Auzeby, M, Wei, S, Underwood, C, Tindall, J, Chen, C, Ling, H, Buswell, R (2016) Effectiveness of using phase change materials on reducing summer overheating issues in UK residential buildings with identification of influential factors, Energies, 9(8), ISSN: 1996-1073. DOI: 10.3390/en9080605.

Lim, S, Buswell, R, Valentine, PJ, Piker, D, Austin, S, De Kestelier, X (2016) Modelling curved-layered printing paths for fabricating large-scale construction components, Additive Manufacturing, 12(Part B), pp.216-230, ISSN: 2214-8604. DOI: 10.1016/j.addma.2016.06.004.

Quiggin, D and Buswell, R (2016) The implications of heat electrification on national electrical supply-demand balance under published 2050 energy scenarios, Energy, 98, pp.253-270, ISSN: 0360-5442. DOI: 10.1016/j.energy.2015.11.060.

Menezes, AC, Cripps, A, Buswell, RA, Wright, J, Bouchlaghem, D (2014) Estimating the energy consumption and power demand of small power equipment in office buildings, Energy and Buildings, 75, pp.199-209, ISSN: 0378-7788. DOI: 10.1016/j.enbuild.2014.02.011.

Wei, S, Buswell, RA, Loveday, D (2013) Factors affecting ‘end-of-day’ window position in a non-air-conditioned office building, Energy and Buildings, 62, pp.87-96.

Kossmann de Menezes, AC, Buswell, R, Cripps, A, Bouchlaghem, D (2013) Benchmarking Small Power Energy Consumption in UK Office Buildings: A Review of Data Published in CIBSE Guide F, Building Services Engineering Research and Technology: an international journal, 34(1), pp.---.

Menezes, AC, Cripps, A, Buswell, RA, Bouchlaghem, D (2013) Benchmarking small power energy consumption in office buildings in the United Kingdom: A review of data published in CIBSE Guide F, Building Services Engineering Research and Technology, 34(1), pp.73-86, ISSN: 0143-6244. DOI: 10.1177/0143624412465092.

Steijger, LA, Buswell, RA, Smedley, VA, Firth, SK, Rowley, P (2013) Establishing the zero-carbon performance of compact urban dwellings, Journal of Building Performance Simulation, 6(4), pp.319-334.

Quiggin, D, Cornell, S, Tierney, M, Buswell, R (2012) A simulation and optimisation study: Towards a decentralised microgrid, using real world fluctuation data, Energy, In Press, pp.-, DOI: 10.1016/j.energy.2012.02.007.

Lim, S, Buswell, RA, Le, TT, Austin, SA, Gibb, AGF, Thorpe, T (2012) Developments in construction-scale additive manufacturing processes, AUTOMATION IN CONSTRUCTION, 21, pp.262-268, ISSN: 0926-5805. DOI: 10.1016/j.autcon.2011.06.010.

Le, TT, Austin, SA, Lim, S, Buswell, RA, Law, R, Gibb, AGF, Thorpe, T (2012) Hardened properties of high-performance printing concrete, Cement and Concrete Research, ISSN: 0008-8846.

Le, TT, Austin, SA, Lim, S, Buswell, RA, Gibb, AGF, Thorpe, T (2012) Mix design and fresh properties for high-performance printing concrete, Materials and Structures/Materiaux et Constructions, pp.1-12, ISSN: 1359-5997.

Menezes, AC, Cripps, A, Bouchlaghem, D, Buswell, RA (2011) Predicted vs. actual energy performance of non-domestic buildings: Using post-occupancy evaluation data to reduce the performance gap, Applied Energy, 97, pp.355-364.

De Kestelier, X and Buswell, R (2009) A digital design environment for large-scale rapid manufacturing, ACADIA 09: reForm: Building a Better Tomorrow - Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture, pp.201-208.

Buswell, RA, Thorpe, A, Soar, RC, Gibb, AGF (2008) Design, data and process issues for mega-scale rapid manufacturing machines used for construction, Automation in construction, 17(8), pp.923-929.

Godbold, O, Kang, J, Buswell, R, Soar, R (2008) Fabrication of acoustic absorbing topologies using rapid prototyping, Canadian Acoustics - Acoustique Canadienne, 36(3), pp.144-145, ISSN: 0711-6659.

Wright, JA, Zhang, Y, Angelov, P, Hanby, V, Buswell, RA (2008) Evolutionary Synthesis of HVAC System Configurations: Algorithm Development, HVAC & R Research, 14(1), pp.33-55, ISSN: 1078-9669. DOI: 10.1080/10789669.2008.10390992.

Godbold, O, Kang, J, Buswell, RA, Soar, RC (2008) Fabrication of acoustic absorbing topologies using rapid manufacturing, Canadian Acoustics, 36(3), pp.144-145.

Buswell, RA, Soar, RC, Gibb, AGF, Thorpe, A (2007) Freeform Construction: Mega-scale rapid manufacturing for construction, Automation in Construction, 16(2), pp.224-231, ISSN: 0926-5805. DOI: 10.1016/j.autcon.2006.05.002.

Godbold, OB, Soar, RC, Buswell, RA (2007) Implications of Solid freeform fabrication on acoustic absorbers, Rapid Prototyping Journal, 13(5), pp.298-303, ISSN: 1355-2546.

Buswell, RA and Soar, RC (2005) The Future of Construction? PSR Journal: Construction (invited article), (3), pp.87-88.

Buswell, RA and Wright, JA (2004) Uncertainty in model-based condition monitoring, Building Service Engineering Research and Technology, 25(1), pp.65-75, ISSN: 1477-0849. DOI: 10.1191/0143624404bt089oa.

Buswell, RA, Haves, P, Wright, JA (2003) Model-Based Condition Monitoring of a HVAC Cooling Coil Sub-System in a Real Building, Building Service Engineering Research and Technology, 24(2), pp.103-116, ISSN: 1477-0849. DOI: 10.1191/0143624403bt062oa.

Angelov, PP and Buswell, RA (2003) Automatic generation of fuzzy rule-based models from data by genetic algorithms, Information Sciences, 150(1-2), pp.17-31.

Angelov, PP, Zhang, J, Wright, JA, Buswell, RA, Hanby, VI (2003) Automatic Design Synthesis and Optimization of Component-based Systems by Evolutionary Algorithms, Lecture Notes in Computer Science 2724 Genetic and Evolutionary Computation, pp.1938-1950.

Angelov, PP, Zhang, Y, Wright, JA, Hanby, VI, Buswell, RA (2003) Automatic Design Synthesis and Optimization of Component-based systems by Evolutionary Algorithms, Lecture Notes in Computer Science, pp.1938-1950, ISSN: 0302-9743.

Angelov, PP and Buswell, R (2002) Identification of Evolving Fuzzy Rule-based Models, IEEE Transactions on Fuzzy Systems, 10(5), pp.667-677, ISSN: 1063-6706. DOI: 10.1109/TFUZZ.2002.803499.

Norford, LK, Wright, JA, Buswell, RA, Luo, D, Klaassen, CJ, Suby, A (2002) Demonstration of fault detection and diagnosis methods for air-handling units (vol 8, pg 41, 2002), HVAC&R RESEARCH, 8(4), pp.467-467, ISSN: 1078-9669.

Norford, LK, Wright, JA, Buswell, RA, Lou, D, Klassen, C, Suby, A (2002) Demonstration of Fault Detection and Real Building, International Journal of HVAC&R Research, 8(1), pp.41-71, ISSN: 1078-9669.

Norford, LK, Wright, JA, Buswell, RA, Luo, D, Klaassen, CJ, Suby, A (2002) Demonstration of fault detection and diagnosis methods for air-handling units (ASHRAE 1020-RP), HVAC&R RESEARCH, 8(1), pp.41-71, ISSN: 1078-9669. DOI: 10.1080/10789669.2002.10391289.

Conferences

Alanazi, N, Kolawole, JT, Buswell, R, Susmel, L (2022) The Theory of Critical Distances to perform the static assessment of 3D-printed concrete weakened by manufacturing defects and cracks. In , Procedia Structural Integrity, pp.336-342, ISBN: 9781713870302. DOI: 10.1016/j.prostr.2022.12.041.

Kinnell, P, Dobranski, J, Xu, J, Wang, W, Kolawole, J, Hodgson, J, Austin, S, Provis, J, Pialarissi-Cavalaro, S, Buswell, R (Accepted for publication) Precision manufacture of concrete parts using integrated robotic 3D printing and milling. In 21st International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2021); Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021, Virtual, pp.57-60.

Wang, D, Konstantinidis, N, Austin, S, Buswell, R, Cavalaro, S, Cecinia, D (2020) Flexural behaviour of AR-glass textile reinforced 3D printed concrete beams. In Bos, FP, Lucas, SS, Wolfs, RJM, Salet, TAM (ed) 2nd RILEM International Conference on Concrete and Digital Fabrication; Second RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2020, Eindhoven, The Netherlands, pp.728-737, ISBN: 9783030499150. DOI: 10.1007/978-3-030-49916-7_73.

Buswell, R, Kinnell, P, Xu, J, Hack, N, Kloft, H, Maboudi, M, Gerke, M, Massin, P, Grasser, G, Wolfs, R, Bos, F (2020) Inspection methods for 3D concrete printing. In T, BFLSWRS (ed) 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2020); Second RILEM International Conference on Concrete and Digital Fabrication. DC 2020, Eindhoven University of Technology, The Netherlands, pp.790-803, ISBN: 9783030499150. DOI: 10.1007/978-3-030-49916-7_78.

Wei, S, Buswell, R, Loveday, D (2019) A comparison of alternative occupant classification approaches for the modelling of window opening behaviour in office buildings. In , Proceedings - Windsor Conference 2014: Counting the Cost of Comfort in a Changing World, pp.160-170, ISBN: 9780992895709.

Auzeby, M, Wei, S, Underwood, C, Chen, C, Ling, H, Pan, S, Ng, B, Tindall, J, Buswell, R (2017) Using Phase Change Materials to Reduce Overheating Issues in UK Residential Buildings. In 8th International Conference on Applied Energy, ICAE2016, Energy Procedia, Beijing, Chi, pp.4072-4077, DOI: 10.1016/j.egypro.2017.03.861.

Marini, D, Buswell, R, Hopfe, C (2017) The impact of electrical load shifting strategies on storage capacity and service provision of domestic hot water systems in residential buildings. In Building Simulation, San Francisco, California, USA.

Marini, D, He, C, Buswell, R, Hopfe, C, Crawley, D (2016) Modelling and calibration of a domestic building using high-resolution monitoring data. In Proceedings of Building Simulation and Optimization: Third Conference of IBPSA-England, Newcastle University.

Cosar-Jorda, P and Buswell, R (2015) Estimating the air change rates in dwellings using a heat balance approach. In , 6th International Building Physics Conference, IBPC 2015, Turin, Italy. DOI: 10.1016/j.egypro.2015.11.738.

Cosar-Jorda, P, Buswell, R, Mitchell, V (2015) Identifying the opportunities for ICT based energy demand reduction in family homes. In EEDAL: Energy Efficiency in Domestic Appliances and Lighting, Lucerne-Horw, Switzerland.

Marini, D, Buswell, R, Hopfe, C (2015) Estimating waste heat from domestic hot water systems in UK dwellings. In 14th International Conference of the International Building Performance Simulation Association, Hyderabad, India.

Marini, D, Buswell, R, Hopfe, C (2015) A critical software review - how is hot water modelled in current building simulation ?. In 14th International Conference of the International Building Performance Simulation Association, Hyderabad, India.

Marini, D, Webb, LH, Diamantis, G, Buswell, RA (2014) Exploring the impact of model calibration on estimating energy savings through better space heating control. In Proceedings of Building Simulation and Optimization: Second Conference of IBPSA-England conference in association with CIBSE, London, pp.1-8.

Wang, M, Wright, J, Brownlee, A, Buswell, R (2014) Applying Global and Local SA in Identification of Variables Importancew with the use of Multi-Objective Ooptimization. In Building Simulation and Optimisation 2014, London, UK, -.

Wei, S, Buswell, RA, Loveday, D (2014) A comparison of alternative occupant classification approaches for the modelling of window opening behaviour in office buildings. In NCEUB: Counting the Cost of Comfort in a Changing World, Windsor, London, UK, -.

Wang, M, Wright, J, Brownlee, A, Buswell, R, ASHRAE, (2014) A Comparison Of Approaches To Stepwise Regression For The Indication of Variables Sensitivities Used With A Multi-Objective Optimization Problem. In , ASHRAE TRANSACTIONS 2014, VOL 120, PT 2.

Wang, M, Wright, J, Buswell, R, Brownlee, A (2013) A comparison of approaches to stepwise regression for global sensitivity analysis used with evolutionary optimization. In , Proceedings of BS 2013: 13th Conference of the International Building Performance Simulation Association, pp.2551-2558.

Buswell, RA (2013) Uncertainty in whole house monitoring. In , Proceedings of BS 2013: 13th Conference of the International Building Performance Simulation Association, pp.2404-2411.

Cosar-Jorda, P, Buswell, R, Mitchell, V (Accepted for publication) Estimating the potential reductions in energy demand through efficiency, control and lifestyle change in a real home. In Future Build, Bath University, pp.135-144.

Cosar-Jorda, P, Buswell, R, Webb, L, leder, K, Morosanu, R, Pink, S (2013) Energy in the Home: Everyday life and the effect on time of use. In Building Simulation 2013, Chambery, France, pp.1722-1729.

Buswell, RA (2013) UNCERTAINTY IN WHOLE HOUSE MONITORING. In Building Simulation 2013, Chambery, France, pp.2403-2410.

Buswell, RA, Marini, D, Webb, LH, Thomson, M (2013) Determining heat use in residential buildings using high resolution gas and domestic hot water monitoring. In Building Simulation 2013, Chambery, France, pp.2412-2419.

Buswell, RA, Marini, D, Webb, LH, Thomson, M (2013) DETERMINING HEAT USE IN RESIDENTIAL BUILDINGS USING HIGH RESOLUTION GAS AND DOMESTIC HOTWATER MONITORING. In , BUILDING SIMULATION 2013: 13TH INTERNATIONAL CONFERENCE OF THE INTERNATIONAL BUILDING PERFORMANCE SIMULATION ASSOCIATION, pp.2413-2420.

Jorda, PC, Buswell, RA, Webb, LH, Mackley, KL, Morosanu, R, Pink, S (2013) ENERGY IN THE HOME: EVERYDAY LIFE AND THE EFFECT ON TIME OF USE. In , BUILDING SIMULATION 2013: 13TH INTERNATIONAL CONFERENCE OF THE INTERNATIONAL BUILDING PERFORMANCE SIMULATION ASSOCIATION, pp.1723-1730.

Wright, JA, Wang, M, Brownlee, AEI, Buswell, R (2012) Variable Convergence in Evolutionary Optimization and its Relationship to Sensitivity Analysis. In Building Simulation and Optimization 2012, Loughborough, pp.102-109, ISBN: 978-1-897911-42-6.

Kossmann de Menezes, AC, Tetlow, R, Beaman, C, Bouchlaghem, D, Cripps, A, Buswell, R, (2012) ASSESSING THE IMPACT OF OCCUPANT BEHAVIOUR ON ELECTRICITY CONSUMPTION FOR LIGHTING AND SMALL POWER IN OFFICE BUILDINGS. In International Conference on Innovation in Architecture, Engineering and Construction, Sao Paulo, Brazil, pp.---.

Kossmann de Menezes, AC, Buswell, R, Bouchlaghem, (2012) Page 1 of 19 Review of Benchmarks for Small Power Consumption in Office Buildings. In CIBSE ASHRAE Technical Symposium, Imperial College, London, pp.1-19.

Yang, T, Buswell, RA, Cook, MJ (2011) Exploring rapid prototyping techniques for validating numerical models of naturally ventilated buildings. In , Proceedings of Building Simulation 2011: 12th Conference of International Building Performance Simulation Association, pp.965-971.

Wei, S, Buswell, R, Loveday, D (2011) Factors affecting 'end of day' window position in non-airconditioned office buildings. In , Proceedings of Building Simulation 2011: 12th Conference of International Building Performance Simulation Association, pp.680-687.

Wei, S, Buswell, RA, Loveday, D (2011) Factors affecting 'end of day' window position in non-air-conditioned office buildings. In Building Simulation 2011, Sydney, Australia, pp.---.

Yang, T, Buswell, RA, Cook, MJ (2011) EXPLORING RAPID PROTOTYPING TECHNIQUES FOR VALIDATING NUMERICAL MODELS OF NATURALLY VENTILATED BUILDINGS. In Building Simulation 2011, Sydney, Australia, pp.---.

Menezes, AC, Cripps, A, Bouchlaghem, D, Buswell, RA (2011) Analysis of Electricity Consumption for Lighting and Small Power in Office Buildings. In CIBSE Technical Symposium, DeMontfort University, Leicester, UK, pp.---.

Lim, S, Buswell, RA, Le, TT, Austin, SA, Gibb, AGF, Thorpe, A (2011) Development of a viable Concrete Printing process. In The 28th International Symposium on Automation and Robotics in Construction (ISARC2011), Imperial Palace Hotel, Seoul, South Korea, pp.665-670.

Le, TT, Austin, SA, Lim, S, Buswell, RA, Gibb, AGF, Thorpe, A (2011) High-performance printing concrete for freeform building components. In fib Symposium Prague 2011, Concrete engineering for excellence and efficiency, Prague, Czech Republic.

Menezes, AC, Cripps, A, Bouchlaghem, D, Buswell, RA (2011) Predicted vs. Actual Energy Performance of Non-Domestic Buildings. In Third International Conference on Applied Energy, Perugia, Italy, pp.0-0.

Steijger, LA, Smedley, V, Buswell, RA, Firth, SK, Rowley, PN (2010) An air source heat pump model for operation in cold humid environments. In System simulation in Buildings, Liege, Belgium.

Wei, S, Loveday, DL, Buswell, RA (2010) Results from an adaptive action preference survey in non-air-conditioned buildings and its application for human behaviour modelling. In CLIMA 2010, Antalya, Turkey.

Wei, S, Loveday, DL, Buswell, RA (2010) Probabilistic modelling of human adaptive behaviour in non-air-conditioned buildings. In NCEUB: Adapting to Change: New Thinking on Comfort, Windsor, UK.

De Kestelier, X and Buswell, RA (2009) A digital design environment for large scale additive fabrication. In reForm conference, Proceedings of Arcadia2009, Chicago US.

Le, TT, Lim, SW, Webster, JA, Austin, SA, Thorpe, A, Gibb, AGF, Buswell, RA (2009) Fabricating construction components using layered manufacturing technology. In Global Innovation in Construction Conference 2009 (GICC¿09), Loughborough University, Leicestershire, UK.

Firth, SK, Buswell, RA, Lomas, KJ (2009) A simple model of domestic PV systems and their integration with building loads. In Building Simulation 2009, Proceedings of IBPSA, Glasgow, pp.789-796.

Buswell, RA, Gibb, AGF, Soar, RC, Austin, SA, Thorpe, A (2007) Applying future industrialized processes to construction. In CIB W096 Conference, Proceedings of CIB W096 Conference, South Africa, South Africa, pp.224-231.

Godbold, OJ, Kang, J, Soar, RC, Buswell, RA (2007) From MPA to strategically designed absorbers using solid freeform fabrication techniques. In 19th International Congress on Acoustics (ICA), Proceedings of the 19th International Congress on Acoustics, Madrid, Spain, n/a.

Buswell, R, Thorpe, T, Soar, RC, Gibb, A (2007) Design data issues for the control of mega-scale rapid manufacturing. In 24th W78 Conference “Bringing ITC knowledge to work“, Maribor, Slovenia.

Buswell, RA, Soar, RC, Gibb, AGF, Thorpe, A (2006) Freeform Construction Application Research. In of the international conference on Advances in Engineering structures, mechanics and construction, Advances in Engineering structures, mechanics and construction, University of Waterloo, Waterloo, Ontario, Canada, pp.781-792, ISBN: 1-4020-4890-4.

Buswell, RA, Soar, RC, Gibb, AGF, Thorpe, A (2005) The potential of freeform construction processes. In Proceedings of the 16th International Symposium on Solid Freeform Fabrication, Austin, Texas, USA.

Buswell, RA, Soar, RC, Pendlebury, MC, Gibb, AGF, Edum Fotwe, FT, Thorpe, A (2005) Investigation of the potential for applying freeform processes to construction. In Proceedings of the 3rd International Conference on Innovation in Architecture, Engineeing and Construction (AEC), Rotterdam, The Netherlands, pp.141-150.

Buswell, RA and Kelso, R (2005) Uncertainty in the performance validation of HVAC Systems. In Proceedings of CLIMA, Lausanne, Switzerland, Paper 178.

Angelov, PP and Buswell, RA (2003) Automatic generation of fuzzy rule-based models from data by genetic algorithms. In International Conference on Recent Advances in Soft Computing 2000, INFORMATION SCIENCES, DE MONTFORT UNIV, LEICESTER, ENGLAND, pp.17-31, DOI: 10.1016/S0020-0255(02)00367-5.

Angelov, PP, Zhang, Y, Wright, JA, Hanby, VI, Buswell, RA (2003) Automatic Design Synthesis and Optimization of Component-Based Systems by Evolutionary Algorithms. In Eds, EC-PEA and 1938-1950, (ed) GECCO, , pp.234-237.

Buswell, RA, Haves, P, Salsbury, TI, Wright J A, (2002) Non-Linear Recursive Parameter Estimation Applied to Fault Detection and Diagnosis in Real Buildings. In 6th International Conference on System Simulation in Buildings, Leige, Belguim, pp.---.

Buswell, RA, Haves, P, Salisbury, TI, Wright, JA (2002) Non-Linear Recursive Parameter Estimation Applied to Fault Detection and Diagnosis in Real Buildings. In Proceedings of the 6th International Conference on System Simulation in Buildings, University of Liege, Belgium.

Buswell, RA and Wright, JA (2002) Uncertainty in Model Based Condition Monitoring. In Proceedings of the 5th International Coference on System Simulation in Buildings, University of Liege, Belgium.

Norford, LK, Buswell, RA, Haves, P, Wright, JA (2002) Demonstration of fault detection and diagnosis methods for air-handling units. In ASHRAE Transactions, p.469.

Angelov, PP, Buswell, RA, Wright, JA, Loveday, DL (2001) Evolving Rules-based Control. In EUNITE Symposium [European Symposium on Intelligent Technologies, Hybrid Systems and their Implementation on Smart Adaptive Systems], EUNITE Symposium, Tenerife, Spain, pp.36-41.

Buswell, RA, Angelov, PP, Wright, JA (2001) Transparency and Simplification of Rule-Based Models for On-Line Adaptation. In 2nd EUSFLAT Conference, Proceedings for 2nd EUSFLAT Conference, Leicester, UK, pp.234-237.

Angelov, PP and Buswell, R (2001) Evolving Rule-based Models: A Tool for Intelligent Adaptation. In 9th IFSA World Congress, Proceedings of the 9th IFSA World Congress, Vancouver, BC, Canada, pp.1062-1067.

Angelov, PP, Buswell, R, Wright, JA (2001) Anaylsis and Adaptation of Fuzzy Rule/based Models Structure: example of HVAC cooling coil modeling. In 2nd EUSFLAT Conference, Leicester, UK, pp.234-237.

Angelov, PP, Hanby, VI, Buswell, RA, Wright, JA (2000) A Methodology for Modelling HVAC Components using Evolving Fuzzy Rules. In IECON-2000, IEEE International Conference on Industrial Engineering, Control and Instrumentation, Nagoya, Japan, pp.247-252.

Angelov, PP, Hanby, VI, Buswell, RA, Wright, JA (2000) Automatic Generation of Fuzzy Rule-based Models from Data by Genetic Algorithms. In International Conference on Advances in Soft Computing, Leicester, UK, pp.29-30.

Buswell, RA, Haves, P, Salsbury, TI (1997) A Model based Approach to the commissioning of HVAC Systems. In Proceedings of CLIMA, Prague, The Czech Republic.

Books

Buswell, R, Blanco, A, Cavalaro, S, Kinnell, P (2022) Preface.

CD Objects

Lim, S, Buswell, RA, Le, TT, Austin, SA, Gibb, AGF, Thorpe, A (2011) Development of a viable Concrete Printing process,.

Le, TT, Austin, SA, Lim, S, Buswell, RA, Gibb, AGF, Thorpe, A (2011) High-performance printing concrete for freeform building components,.

Steijger, LA, Smedley, V, Buswell, RA, Firth, SK, Rowley, PN (2010) An air source heat pump model for operation in cold humid environments,.

Wei, S, Loveday, DL, Buswell, RA (2010) Results from an adaptive action preference survey in non-air-conditioned buildings and its application for human behaviour modelling,.

Wei, S, Loveday, DL, Buswell, RA (2010) Probabilistic modelling of human adaptive behaviour in non-air-conditioned buildings,.

De Kestelier, X and Buswell, RA (2009) A digital design environment for large scale additive fabrication,.

Le, TT, Lim, SW, Webster, JA, Austin, SA, Thorpe, A, Gibb, AGF, Buswell, RA (2009) Fabricating construction components using layered manufacturing technology,.

Firth, SK, Buswell, RA, Lomas, KJ (2009) A simple model of domestic PV systems and their integration with building loads,International Building Performance and Simulation Association, Building Simulation, BS09, Glasgow, UK.

Chapters

Mechtcherine, V, Fataei, S, Bos, FP, Buswell, RA, Silva, WRLD, Keita, E, Krauss, HW, Lowke, D, Perrot, A, Nerella, VN, Roussel, N, Sonebi, M, Wangler, T, Weger, D, Wolfs, R (2022) Digital Fabrication with Cement-Based Materials: Underlying Physics. In RILEM State-of-the-Art Reports, pp.49-98, DOI: 10.1007/978-3-030-90535-4_3.

Buswell, RA, Bos, FP, Silva, WRLD, Hack, N, Kloft, H, Lowke, D, Freund, N, Fromm, A, Dini, E, Wangler, T, Lloret-Fritschi, E, Schipper, R, Mechtcherine, V, Perrot, A, Vasilic, K, Roussel, N (2022) Digital Fabrication with Cement-Based Materials: Process Classification and Case Studies. In RILEM State-of-the-Art Reports, pp.11-48, DOI: 10.1007/978-3-030-90535-4_2.

Xu, J, Kolawole, JT, Provis, J, Dobrzanski, J, Kinnell, P, Cavalaro, S, Wang, W, Buswell, R (2022) An Early Trial on Milling 3D Printed Concrete Geometries: Observations and Insights of the Process. In RILEM Bookseries, Springer International Publishing, pp.9-14, ISBN: 9783031061158. DOI: 10.1007/978-3-031-06116-5_2.

Kolawole, JT, De-Becker, D, Xu, J, Dobrzanski, J, Cavalaro, S, Austin, S, Roussel, N, Buswell, R (2022) Selected Test Methods for Assessing Fresh and Plastic-State 3D Concrete Printing Materials. In RILEM Bookseries, Springer International Publishing, pp.460-466, ISBN: 9783031061158. DOI: 10.1007/978-3-031-06116-5_68.

Buswell, RA, Gibb, AGF, Austin, SA, Thorpe, A (2010) Applying future industrialised process to construction. In Girmscheid, G and Scheublin, F (ed) New Perspectives in Industrialisation in Construction ¿ A State of the Art Report, ETH, Zurich, pp.149-159, ISBN: 978-3-906800-17-2.

Thorpe, A, Buswell, RA, Soar, RC, Gibb, AGF (2008) VR or PR: Virtual or Physical Reality?. In Brandon, P and Kocaturk, T (ed) Virtual Futures for Design, Construction and Procurement, Blackwell Publishing, pp.35-46, ISBN: 978-1-4051-7024-6.

Angelov, PP, Hanby, VI, Buswell, RA, Wright, JA (2001) Automatic Generation of Fuzzy Rule-based Models from Data by Genetic Algorithms. In John, R and Birkenhead, R (ed) Developments in Soft Computing, Springer-Verlag, pp.31-40.

Internet Publications

Xu, J, Buswell, R, Kinnell, P (Accepted for publication) Test part CAD model for GD&T in 3D Concrete Printing.

De Becker, D, Dobrzanski, J, Xu, J, Kinnell, P, Provis, J, Buswell, R (Accepted for publication) CAD model of a standardised test geometry for benchmarking 3D Concrete Printing and hybrid construction manufacturing system capability.

Patents

Austin, SA, Buswell, R, Lim, S, Webster, J (Accepted for publication) Method and apparatus for delivery of cementitious material.

Posters

Mitchell, V, Wilson, G, Mackley, KL, PINK, S, Buswell, R, Bhamra, T (Accepted for publication) Home Life Insight Cards: TEDDINET Poster.

Reports

Buswell, R, Webb, L, Mitchell, V (2015) LEEDR Household recruitment: procedures, materials and methods.

Buswell, R, Webb, L, Quiggin, D, Cosar-Jorda, P, Marini, D, Osz, K, Morosanu, R, Pink, S, Mackley, KL, Wilson, G, Hanratty, M, Mitchell, V, Bhamra, T (2015) LEEDR: what are the results? Participant feedback for H99.

Buswell, RA and Visier, JC (2010) Commissioning Tools for Improved Building Energy Performance, AECOM Ltd on behalf of IEA ECBCS.

Buswell, RA (2007) Integrating design and Process control for freeform Construction, IMCRC.

Buswell, RA (2005) Application research for Freeform Construction ¿ Final Report, IMCRC.

Buswell, RA (2004) Rapid Manufacturing into Construction: The status of current thinking at Loughborough University, Dept of Civil and Building, Loughborough University.

Wright, JA, Zhang, Y, Angelov, PP, Buswell, RA, Hanby, VI (2004) Building Systems Design Synthesis and Optimization, Final Report to ASHRAE on Research Project 1049-RP.

Angelov, PP, Buswell, RA, Hanby, VI, Wright, JA (2002) Application of Fuzzy-rule based models for HVAC systems Simulation - Final Report, EPSRC funded research.

Norford, LK, Wright, JA, Buswell, RA, Luo, D (2002) Demonstration of Fault Detection and Diagnosis Methods in a Real Building, pp.41-71, Final Report to ASHRAE on Research Project 1020-RP.

Angelov, PP and Buswell, RA (2000) Application of fuzzy rule based models for HVAC Simulation ¿ final report, EPSRC.

Buswell, RA and Wright, JA (1998) Practical Application of Fault Detection and Diagnosis Techniques, Final Report to the UK DOE on 'Methods for Condition Monitoring'.

Datasets

Watson, S, Crawley, J, Lomas, K, Buswell, R (2023) Supplementary information files for Predicting future GB heat pump electricity demand, DOI: 10.17028/rd.lboro.22193449.

Watson, S, Lomas, K, Buswell, R (2018) Data cleaning, temperature and gas demand weighting, and determining the DHW demand, DOI: 10.17028/rd.lboro.6795395.

Mitchell, V, Wilson, G, Mackley, KL, PINK, S, Buswell, R, Bhamra, T (2017) Home Life Insight Cards.

Filesets

Buswell, R, Webb, L, Cosar-Jorda, P, Marini, D, Brownlee, S, Thomson, M, Yang, S-H, Kalawsky, R (2018) LEEDR project home energy dataset, DOI: 10.17028/rd.lboro.6176450.

Media

Evans, MA, Bibb, R, Bingham, Torrens, Sinclair, M, Atkin, J, Newsom, G, Buswell, Concrete Innovation.

Other

Buswell, RA, Wright, JA, Haves, P (2001) Study of a physical model approach to FDD on a cooling coil.

Buswell, RA and Wright, JA (2001) A First Principles Model-Based FDD Tool, VTT Symposium 217.

Buswell, RA and Wright, JA (1998) Model Based Condition Monitoring of a HVAC Subsystem in a Real Building, IEA Annex 34 working paper.

Buswell, RA (1998) Documenting and Transfer of Data Sets, Loughborough, UK.

Buswell, RA (1997) Introducing Faults into Plant Installed in Real Buildings, Boulder, Colorada, USA.

Buswell, RA, Haves, P, Dexter, AL, Ngo, D (1997) Archiving data from real buildings, Boulder, Colorado, USA.