Journal Articles

Christogianni, A, Bibb, R, Filingeri, D (2023) Body temperatures, thermal comfort, and neuropsychological responses to air temperatures ranging between 12°C and 39°C in people with Multiple Sclerosis, Physiology and Behavior, 266, ISSN: 0031-9384. DOI: 10.1016/j.physbeh.2023.114179.

Bibb, R and McKnight, L (2022) Identification of bird taxa species in ancient Egyptian mummies: Part 2, A qualitative evaluation of the utility of CT scanning and 3D printing, Journal of Archaeological Science: Reports, 46(2022), 103668, ISSN: 2352-409X. DOI: 10.1016/j.jasrep.2022.103668.

Christogianni, A, O'Garro, J, Bibb, R, Filtness, A, Filingeri, D (2022) Heat and cold sensitivity in multiple sclerosis: A patient-centred perspective on triggers, symptoms, and thermal resilience practices, Multiple Sclerosis and Related Disorders, 67, ISSN: 2211-0348. DOI: 10.1016/j.msard.2022.104075.

Christogianni, A, Bibb, R, Filtness, A, Filingeri, D (2022) Regional skin wetness perception and its modulation by warm and cold whole body skin temperatures in people with multiple sclerosis, American Journal of Physiology - Regulatory, Integrative and Comparative Physiology, 323(5), ISSN: 0363-6119. DOI: 10.1152/ajpregu.00149.2022.

Kayali, Y, Ding, M, Hamdallah, S, Qi, S, Bibb, R, Gleadall, A (2022) Effect of printing parameters on microscale geometry for 3D printed lattice structures, Materials Today: Proceedings, 70, pp.31-37, DOI: 10.1016/j.matpr.2022.08.487.

Zhang, B, Teoh, XY, Yan, J, Gleadall, A, Belton, P, Bibb, R, Qi, S (2022) Development of combi-pills using the coupling of semi-solid syringe extrusion 3D printing with fused deposition modelling, International Journal of Pharmaceutics, 625(2022), 122140, ISSN: 0378-5173. DOI: 10.1016/j.ijpharm.2022.122140.

Borgianni, Y, Pradel, P, Berni, A, Obi, M, Bibb, R (2022) An investigation into the current state of education in Design for Additive Manufacturing, Journal of Engineering Design, 33(7), pp.461-490, ISSN: 0954-4828. DOI: 10.1080/09544828.2022.2102893.

McKnight, L, White, J, Rosier, A, Cooper, J, Bibb, R (2022) Identification of avian remains contained within wrapped ancient Egyptian mummies: Part 1, A critical assessment of identification techniques, Journal of Archaeological Science: Reports, 45(2022), 103585, ISSN: 2352-409X. DOI: 10.1016/j.jasrep.2022.103585.

Obi, M, Pradel, P, Sinclair, M, Bibb, R (2022) A bibliometric analysis of research in design for additive manufacturing, Rapid Prototyping Journal, 28(5), pp.967-987, ISSN: 1355-2546. DOI: 10.1108/RPJ-11-2020-0291.

Christogianni, A, Bibb, R, Filtness, A, Filingeri, D (2021) A patient-centred evaluation of phantom skin wetness as a sensory symptom in people with multiple sclerosis, Multiple Sclerosis and Related Disorders, 58, 103459, ISSN: 2211-0348. DOI: 10.1016/j.msard.2021.103459.

Zhang, B, Gleadall, A, Belton, P, Mcdonagh, T, Bibb, R, Qi, S (2021) New insights into the effects of porosity, pore length, pore shape and pore alignment on drug release from extrusion-based additive manufactured pharmaceuticals, Additive Manufacturing, 46, 102196, ISSN: 2214-7810. DOI: 10.1016/j.addma.2021.102196.

Zhang, B, Nasereddin, J, McDonagh, T, von Zeppelin, D, Gleadall, A, Alqahtani, F, Bibb, R, Belton, P, Qi, S (2021) Effects of porosity on drug release kinetics of swellable and erodible porous pharmaceutical solid dosage forms fabricated by hot melt droplet deposition 3D printing, International Journal of Pharmaceutics, 604, 120626, ISSN: 0378-5173. DOI: 10.1016/j.ijpharm.2021.120626.

Bibb, R (2020) Designing with people as well as for people, Journal of Design, Business and Society, 6(2), pp.147-150, ISSN: 2055-2106. DOI: 10.1386/dbs_00008_2.

Vlachaki, A, Paterson, A, Porter, S, Bibb, R (2020) Exploring users’ attitudes towards prosthesis aesthetics in the UK and Greece, Design for Health, 4(1), pp.4-23, ISSN: 2473-5132. DOI: 10.1080/24735132.2020.1727699.

Pyatt, C, Sinclair, M, Bibb, R (2019) Co-design methods for eliciting patient needs for wrist splint design, Design for Health, 3(2), pp.240-260, ISSN: 2473-5132. DOI: 10.1080/24735132.2019.1685856.

Jones, P, Bibb, R, Davies, M, Khunti, K, McCarthy, M, Webb, D, Zaccardi, F (2019) Prediction of diabetic foot ulceration: The value of using microclimate sensor arrays, Journal of Diabetes Science and Technology, 14(1), pp.55-64, ISSN: 1932-2968. DOI: 10.1177/1932296819877194.

Rimington, R, Capel, A, Chaplin, K, Fleming, J, Bandulasena, H, Bibb, R, Christie, S, Lewis, M (2019) Differentiation of bioengineered skeletal muscle within a 3D printed perfusion bioreactor reduces atrophic and inflammatory gene expression, ACS Biomaterials Science & Engineering, 5(10), pp.5525-5538, DOI: 10.1021/acsbiomaterials.9b00975.

Jones, PJ, Bibb, R, Davies, MJ, Khunti, K, McCarthy, M, Fong, D, Webb, D (2019) A fitting problem: Standardising shoe fit standards to reduce related diabetic foot ulcers, Diabetes Research and Clinical Practice, 154, pp.66-74, ISSN: 0168-8227. DOI: 10.1016/j.diabres.2019.05.017.

Christogianni, A, Bibb, R, Davis, S, Jay, O, Barnett, M, Evangelou, N, Filingeri, D (2018) Temperature sensitivity in multiple sclerosis: an overview of its impact on sensory and cognitive symptoms, Temperature, ISSN: 2332-8940. DOI: 10.1080/23328940.2018.1475831.

Rimington, R, Capel, A, Player, DJ, Bibb, R, Christie, S, Lewis, M (2018) Feasibility and biocompatibility of 3D‐printed photopolymerized and laser sintered polymers for neuronal, myogenic, and hepatic cell types, Macromolecular Bioscience, 18(7), 1800113, ISSN: 1616-5187. DOI: 10.1002/mabi.201800113.

Pradel, P, Zhu, Z, Bibb, R, Moultrie, J (2018) A framework for mapping design for additive manufacturing knowledge for industrial and product design, Journal of Engineering Design, 29(6), pp.291-326, ISSN: 0954-4828. DOI: 10.1080/09544828.2018.1483011.

Tetteh, SEL, Bibb, R, Martin, S (2018) Mechanical and Morphological Effect of Plant Based Antimicrobial Solutions on Maxillofacial Silicone Elastomer, Materials, DOI: 10.3390/ma11060925.

Han, X and Bibb, R (2018) Optimized vascular network by stereolithography for tissue engineered skin, International Journal of Bioprinting, DOI: 10.18063/ijb.v4i2.134.

Pradel, P, Zhu, Z, Bibb, R, Moultrie, J (2018) Investigation of design for additive manufacturing in professional design practice, Journal of Engineering Design, 29(4-5), pp.165-200, ISSN: 0954-4828. DOI: 10.1080/09544828.2018.1454589.

Adamietz, R, Giesen, T, Mayer, P, Johnson, A, Bibb, R, Seifarth, C (2018) Reconfigurable and transportable container-integrated production system, Robotics and Computer-Integrated Manufacturing, 53, pp.1-20, ISSN: 0736-5845. DOI: 10.1016/j.rcim.2018.02.008.

McKnight, LM, Bibb, R, Mazza, R, Chamberlain, A (2018) Appearance and reality in ancient Egyptian votive animal mummies, Journal of Ancient Egyptian Interconnections, ISSN: 1944-2815.

Cazon, A, Kelly, S, Paterson, A, Bibb, R, Campbell, I (2017) Analysis and comparison of wrist splint designs using the finite element method: Multi-material three-dimensional printing compared to typical existing practice with thermoplastics, Proceedings of the institution of Mechanical and Manufacturing Engineering, Part H :Journal of Engineering in Medicine, 23(9), pp.881-897, ISSN: 0954-4119. DOI: 10.1177/0954411917718221.

Bodkin, T, Bibb, R, Harris, RA (2017) Towards additive manufacture of next generation prosthetics, assessing emerging CAD strategies for improving the existing CAD process order, International Journal of Rapid Manufacturing, ISSN: 1757-8817. DOI: 10.1504/IJRAPIDM.2017.10003093.

Tetteh, S, Bibb, R, Martin, S (2017) Maxillofacial prostheses challenges in resource constrained regions, Disability and Rehabilitation, ISSN: 1464-5165. DOI: 10.1080/09638288.2017.1390697.

Han, X, Bibb, R, Harris, RA (2016) Engineering design of artificial vascular junctions for 3D printing, Biofabrication, 8(2), 025018, ISSN: 1758-5082. DOI: 10.1088/1758-5090/8/2/025018.

Bibb, R, Nottrodt, N, Gillner, A (2016) Artificial vascularised scaffolds for 3D-tissue regeneration -a perspective of the ArtiVasc 3D Project, International Journal of Bioprinting‎, ISSN: 2424-7723. DOI: 10.18063/IJB.2016.01.004.

Kudus, SIA, Campbell, I, Bibb, R (2016) Customer perceived value for self-designed personalised products made using additive manufacturing.

McKnight, LM, Adams, JE, Chamberlain, A, Atherton-Woolham, SD, Bibb, R (2015) Application of clinical imaging and 3D printing to the identification of anomalies in an ancient Egyptian animal mummy, Journal of Archaeological Science: Reports, 3, pp.328-332, ISSN: 2352-409X. DOI: 10.1016/j.jasrep.2015.06.028.

Han, X, Bibb, R, Harris, R (2015) Design of bifurcation junctions in artificial vascular vessels additively manufactured for skin tissue engineering, JOURNAL OF VISUAL LANGUAGES AND COMPUTING, 28, pp.238-249, ISSN: 1045-926X. DOI: 10.1016/j.jvlc.2014.12.005.

Mat, MH, Malek, MFA, Whittow, W, Bibb, R (2015) Ear prosthesis evaluation: specific absorption rate levels in the head due to different angles and frequencies of electromagnetic exposure, Journal of Electromagnetic Waves and Applications, ISSN: 0920-5071. DOI: 10.1080/09205071.2014.1003982.

Payne, T, Mitchell, S, Halkon, B, Bibb, R, Waters, M (2015) Development of a synthetic human thigh impact surrogate for sports personal protective equipment testing, Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, ISSN: 1754-3371. DOI: 10.1177/1754337115582294.

Mitchell, S, Payne, T, Halkon, B, Bibb, R (2015) A systematic approach to the characterisation of human impact injury scenarios in sport, BMJ Open Sport & Exercise Medicine, DOI: 10.1136/bmjsem-2015-000017.

Payne, T, Mitchell, S, Bibb, R, Waters, M (2014) The evaluation of new multi-material human soft tissue simulants for sports impact surrogates, Journal of the Mechanical Behavior of Biomedical Materials, 41, pp.336-356, ISSN: 1751-6161. DOI: 10.1016/j.jmbbm.2014.09.018.

Cazon, A, Aizpurua, J, Paterson, A, Bibb, R, Campbell, I (2014) Customised design and manufacture of protective face masks combining a practitioner-friendly modelling approach and low-cost devices for digitising and additive manufacturing, Virtual and Physical Prototyping, 9(4), pp.251-261, ISSN: 1745-2759. DOI: 10.1080/17452759.2014.958648.

Payne, T, Mitchell, S, Bibb, R, Waters, M (2014) Development of novel synthetic muscle tissues for sports impact surrogates, Journal of the Mechanical Behavior of Biomedical Materials, 41, pp.357-374, ISSN: 1751-6161. DOI: 10.1016/j.jmbbm.2014.08.011.

Paterson, AM, Bibb, Campbell, Bingham, (2014) Comparing Additive Manufacturing technologies for customised wrist splints, Rapid Prototyping Journal, 21(3), pp.230-243, DOI: 10.1108/RPJ-10-2013-0099.

Paterson, A, Donnison, E, Bibb, R, Campbell, I (2014) Computer-aided design to support fabrication of wrist splints using 3D printing: a feasibility study, Hand Therapy, 19(4), pp.102-113, ISSN: 1758-9983. DOI: 10.1177/1758998314544802.

Payne, TM, Mitchell, SR, Bibb, R (2013) Design of Human Surrogates for the Study of Biomechanical Injury: A Review, Critical Reviews in Biomedical Engineering, 41(1), pp.51-89, DOI: 10.1615/CritRevBiomedEng.2013006847.

Capel, AJ, Edmondson, S, Christie, S, Goodridge, RD, Bibb, RJ, Thurstans, M (2013) Design and additive manufacture for flow chemistry, Lab on a Chip, On line first, pp.1-7, ISSN: 1473-0197. DOI: 10.1039/C3LC50844G.

Bibb, R (2012) Print-a-splint, Engineering, 253(5), pp.18-19, ISSN: 0013-7782.

Eggbeer, D, Bibb, R, Ji, L (2012) Evaluation of direct and indirect additive manufacture of maxillofacial prostheses, Proceedings of the Institution of Mechanical Engineers Part H: Journal of Engineering in Medicine, 226(9), pp.718-728, ISSN: 0954-4119. DOI: 10.1177/0954411912451826.

Bibb, RJ, Thompson, D, Winder, J (2011) Computed tomography characterisation of additive manufacturing materials, Medical Engineering and Physics, 33(5), pp.590-596, DOI: 10.1016/j.medengphy.2010.12.015.

Bibb, RJ (2011) Technological developments in medical applications of rapid prototyping and manufacturing technology over the last decade, Journal for New Generation Sciences, 8(2), pp.1-12, ISSN: 1684-4998.

Paterson, AM, Bibb, RJ, Campbell, RI (2010) A review of existing anatomical data capture methods to support the mass customisation of wrist splints, Virtual and Physical Prototyping Journal, 5(4), pp.201-207.

Bibb, RJ, Eggbeer, D, Evans, P (2010) Rapid prototyping technologies in soft tissue facial prosthetics: current state of the art, Rapid Prototyping Journal 2010, 16(2), pp.130-137, DOI: 10.1108/13552541011025852.

Bibb, RJ, Evans, P, Bocca, A, Sugar, A (2009) A Rapid manufacture of custom-fitting surgical guides, Rapid Prototyping Journal, 15(5), pp.346-354, DOI: 10.1108/13552540910993879.

Winder, J and Bibb, RJ (2009) A Review of the Issues Surrounding Three-Dimensional Computed Tomography for Medical Modelling using Rapid Prototyping Techniques, Radiography 2010, 16, pp.78-83, DOI: 10.1016/j.radi.2009.10.005.

Williams, RJ, Eggbeer, D, Bibb, RJ (2008) CAD/CAM Fabricated Removable Partial-Denture Alloy Frameworks, Practical Procedures & Aesthetic Dentistry, 20(6), pp.349-351.

Williams, RJ, Eggbeer, D, Bibb, RJ (2008) CAD/CAM Rapid Manufacturing Techniques in the Fabrication of Removable Partial Denture Frameworks, Quintessence Journal of Dental Technology, 6(1), pp.42-50.

Bibb, RJ, Keating, AP, Knox, J, Zhurov, A (2008) A comparison of plaster, digital and reconstructed study model accuracy, Journal of Orthodontics 2008, 35, pp.191-201.

Williams, RJ, Bibb, R, Eggbeer, D (2008) CAD/CAM-fabricated removable partial-denture alloy frameworks, Practical procedures & aesthetic dentistry : PPAD, 20(6), pp.349-351, ISSN: 1534-6846.

Bibb, RJ (2007) Personal Profile, Time Compression Technologies (USA), 12(2), pp.87-90.

Bibb, RJ (2007) Rapid Manufacturing: The Future of Medical Devices? Time Compression Technologies Magazine, 15(2), pp.33-39.

Eggbeer, D, Bibb, RJ, Evans, P (2007) Digital Technologies in Extra-Oral, Soft Tissue, Facial Prosthetics: Current State of the Art, Journal of Maxillofacial Prosthetics & Technology, 10, pp.9-16.

Eggbeer, D, Bibb, R, Evans, P (2006) Toward identifying specification requirements for digital bone-anchored prosthesis design incorporating substructure fabrication: A pilot study, INTERNATIONAL JOURNAL OF PROSTHODONTICS, 19(3), pp.258-263, ISSN: 0893-2174.

Kau, CH, Zhurov, A, Richmond, S, Bibb, RJ, Sugar, A, Knox, J, Hartles, F (2006) The 3-Dimensional Construction of the Average 11-Year-Old Child Face: A Clinical Evaluation and Application, Journal of Oral and Maxillofacial Surgery, 64(7), pp.1086-92, ISSN: 0278-2391. DOI: 10.1016/j.joms.2006.03.013.

Eggbeer, D, Bibb, RJ, Evans, P (2006) Toward Identifying Specification Requirements for Digital Bone-Anchored Prosthesis Design Incorporating Substructure Fabrication: A Pilot Study, International Journal of Prosthodontics, 19(3), pp.258-63, ISSN: 0893-2174.

Bibb, RJ, Eggbeer, D, Williams, R (2006) Rapid manufacture of removable partial denture frameworks, Rapid Prototyping Journal, 12(2), pp.95-9, ISSN: 1355-2546. DOI: 10.1108/13552540610652438.

Williams, RJ, Bibb, RJ, Eggbeer, D, Collis, J (2006) Use of CAD/CAM technology to fabricate a removable partial denture framework, Journal of Prosthetic Dentistry, 96(2), pp.96-99, ISSN: 0022-3913. DOI: 10.1016/j.prosdent.2006.05.029.

Eggbeer, D, Bibb, RJ, Evans, P (2006) Assessment of digital technologies in the design of a magnet retained auricular prosthesis, The Journal of Maxillofacial Prosthetics & Technology, 9, pp.1-4, ISSN: 1366-4697.

Bibb, RJ, Eggbeer, D, Williams, RJ, Woodward, A (2006) Trial fitting of a removable partial denture framework made using computer-aided design and rapid prototyping techniques, Proceedings of the Institute of Mechanical Engineers Part H: Journal of Engineering in Medicine, 220(7), pp.793-797, ISSN: 0954-4119. DOI: 10.1243/09544119JEIM62.

Williams, RJ, Bibb, RJ, Eggbeer, D, Woodward, A (2006) A Patient-fitted removable partial denture framework fabricated from a CAD/CAM-produced sacrificial pattern, Quintessence Journal of Dental Technology, 4(3), pp.200-204.

Eggbeer, D, Evans, P, Bibb, RJ (2006) A Pilot Study in the Application of Texture Relief for Digitally Designed Facial Prostheses, Proceedings of the Institute of Mechanical Engineers Part H: Journal of Engineering in Medicine, 220(6), pp.705-714, ISSN: 0954-4119. DOI: 10.1243/09544119JEIM38.

Bibb, R, Eggbeer, D, Williams, R (2006) Rapid manufacture of removable partial denture frameworks, RAPID PROTOTYPING JOURNAL, 12(2), pp.95-99, ISSN: 1355-2546. DOI: 10.1108/13552540610652438.

Eggbeer, D, Bibb, R, Williams, R (2005) Erratum: The computer-aided design and rapid prototyping fabrication of removable partial denture frameworks (Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine (2005) vol. 219 (H3) (195-202), Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 219(4), p.303, ISSN: 0954-4119.

Kau, CH, Zhurov, A, Bibb, R, Hunter, L, Richmond, S (2005) The investigation of the changing facial appearance of identical twins employing a three-dimensional laser imaging system, Orthodontics & Craniofacial Research, 8(2), pp.85-90, ISSN: 1601-6335. DOI: 10.1111/j.1601-6343.2005.00320.x.

Eggbeer, D, Bibb, RJ, Williams, R (2005) The Computer Aided Design and Rapid prototyping of Removable Partial Denture Frameworks, Proceedings of the Institute of Mechanical Engineers Part H: Journal of Engineering in Medicine, 219(3), pp.195-202, ISSN: 0954-4119. DOI: 10.1243/095441105X9372.

Bibb, RJ (2005) Medical applications of time compression technologies, Time Compression Technologies Magazine, 4(13), pp.14-19.

Winder, RJ and Bibb, RJ (2005) Medical Rapid Prototyping Technologies: State of the Art and Current Limitations for Application in Oral and Maxillofacial Surgery, Journal of Oral and Maxillofacial Surgery, 63(7), pp.1006-15, ISSN: 0278-2391. DOI: 10.1016/j.joms.2005.03.016.

Eggbeer, D, Williams, RJ, Bibb, RJ (2004) A Digital Method of Design and Manufacture of Sacrificial Patterns for Removable Partial Denture Metal Frameworks, Quintessence Journal of Dental Technology, 2, pp.490-9.

Evans, P, Eggbeer, D, Bibb, RJ (2004) Orbital Prosthesis wax Pattern Production using Computer Aided Design and Rapid Prototyping Techniques, The Journal of Maxillofacial Prosthetics & Technology, 7, pp.11-15, ISSN: 1366-4697.

Williams, RJ, Bibb, RJ, Eggbeer, D (2004) CAD/CAM in the Fabrication of Removable Partial Denture Frameworks: A Virtual Method of Surveying 3D Scanned Dental Casts, Quintessence Journal of Dental Technology, 2, pp.268-76.

Sugar, A, Bibb, RJ, Morris, C, Parkhouse, J (2004) The development of a collaborative medical modelling service: organisational and technical considerations, British Journal of Oral & Maxillofacial Surgery, 42, pp.323-30, ISSN: 0266-4356. DOI: 10.1016/j.bjoms.2004.02.025.

Williams, RJ, Bibb, RJ, Rafik, T (2004) A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying, Journal of Prosthetic Dentistry, 91, pp.85-88, ISSN: 0022-3913. DOI: 10.1016/j.prosdent.2003.10.002.

Hughes, CW, Page, K, Bibb, R, Taylor, J, Revington, P (2003) The custom-made titanium orbital floor prosthesis in reconstruction for orbital floor fractures, British Journal of Oral and Maxillofacial Surgery, 41(3), pp.209-209, ISSN: 0266-4356. DOI: 10.1016/s0266-4356(03)00049-4.

Bibb, RJ (2003) Virtual Medical Modelling and Rapid Surgical Templates, CAD/CAM Net (Online).

Hughes, CW, Page, K, Bibb, R, Taylor, J, Revington, P (2003) The custom-made titanium orbital floor prosthesis in reconstruction for orbital floor fractures, BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY, 41(1), pp.50-53, ISSN: 0266-4356. DOI: 10.1016/S0266435602002498.

Bibb, RJ (2003) Implant Planning Using Mimics and Magics, Materialise Gazette, 3, pp.18-20.

Minns, RJ, Bibb, RJ, Banks, R, Sutton, RA (2003) The use of a reconstructed three-dimensional solid model from CT to aid the surgical management of a total knee arthroplasty: a case study, Medical Engineering & Physics, 25, pp.523-6, ISSN: 1350-4533. DOI: 10.1016/S1350-4533(03)00050-X.

Hughes, CW, Page, K, Bibb, RJ, Taylor, J, Revington, P (2003) The custom-made titanium orbital floor prosthesis in reconstruction for orbital floor fractures, British Journal of Oral and Maxillofacial Surgery, 41(1), pp.50-3, ISSN: 0266-4356. DOI: 10.1016/S0266435602002498.

Bibb, RJ, Bocca, A, Sugar, A, Evans, P (2003) Planning Osseointegrated Implant Sites using Computer Aided Design and Rapid Prototyping, The Journal of Maxillofacial Prosthetics & Technology, 6, pp.1-4, ISSN: 1366-4697.

Bibb, RJ and Sisias, G (2002) Bone Structure Models using Stereolithography: A Technical Note, Rapid Prototyping Journal, 8(1), pp.25-9, ISSN: 1355-2546. DOI: 10.1108/13552540210413275.

Bibb, RJ, Bocca, A, Evans, P (2002) An Appropriate Approach to Computer Aided Design and Manufacture of Cranioplasty Plates, The Journal of Maxillofacial Prosthetics & Technology, 5(1), pp.28-31, ISSN: 1366-4697.

Benham, MP, Wright, DK, Bibb, RJ (2001) Modelling soft tissue for kinematic analysis of multi-segment human body models, Biomedical Sciences Instrumentation, 38, pp.111-8, ISSN: 0067-8856.

Bibb, RJ and Brown, R (2000) The Application of Computer Aided Product Development Techniques in Medical Modelling, Biomedical Sciences Instrumentation, 36, pp.319-24, ISSN: 0067-8856.

Bibb, RJ, Freeman, P, Brown, R, Sugar, A, Evans, P, Bocca, A (2000) An Investigation of three-dimensional scanning of human body parts and its use in the design and manufacture of prostheses, Proceedings of the Institute of Mechanical Engineers Part H: Journal of Engineering in Medicine, 214(6), pp.589-94, ISSN: 0954-4119. DOI: 10.1243/0954411001535615.

Bibb, R, Freeman, P, Brown, R, Sugar, A, Evans, P, Bocca, A (2000) An investigation of three-dimensional scanning of human body surfaces and its use in the design and manufacture of prostheses, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 214(6), pp.589-594, ISSN: 0954-4119. DOI: 10.1243/0954411001535615.

Bibb, RJ, Taha, Z, Brown, R, Wright, D (1999) Development of a Rapid Prototyping Design Advice System, Journal of Intelligent Manufacturing, 10(3/4), pp.331-40, ISSN: 0956-5515. DOI: 10.1023/A:1008920512663.

Bibb, R, Taha, Z, Brown, R, Wright, D (1999) Development of a rapid prototyping design advice system, Journal of Intelligent Manufacturing, 10(3), pp.331-339, ISSN: 0956-5515. DOI: 10.1023/a:1008920512663.

Bibb, RJ (1996) Practice of Rapid Prototyping, Engineering Designer ¿ Journal of the Institute of Engineering Designers, pp.18-20.

Conferences

Obi, M, Pradel, P, Sinclair, M, Bibb, R (2022) Investigating designers’ preferred learning media for Design for Additive Manufacturing. In International Conference on Design for 3D Printing, Singapore.

Duckworth, A, Gleadall, A, Bibb, R (2021) Novel 3D printed custom kinesiology tape for variable usage scenarios. In Additive Manufacturing Meets Medicine 2021; Transactions on Additive Manufacturing Meets Medicine, Online. DOI: 10.18416/AMMM.2021.2109540.

Zhang, B, Teoh, X, Belton, P, Gleadall, A, Bibb, R, Qi, S (2021) The development of Hypromellose based semisolid 3D printing inks for drug delivery. In Additive Manufacturing Meets Medicine 2021; Transactions on Additive Manufacturing Meets Medicine, Online. DOI: 10.18416/AMMM.2021.2109541.

Berni, A, Borgianni, Y, Obi, M, Pradel, P, Bibb, R (2021) Investigating perceived meanings and scopes of Design for Additive Manufacturing. In 23rd International Conference on Engineering Design (ICED 21); Proceedings of the Design Society: International Conference on Engineering Design, Gothenburg, Sweden, pp.1937-1946, DOI: 10.1017/pds.2021.455.

Christogianni, A, Bibb, R, Filingeri, D (2020) Skin wetness sensitivity across the body of people with multiple sclerosis and its modulation by changes in whole-body mean skin temperature. In 8th International Conference on the Physiology and Pharmacology of Temperature Regulation (vPPTR 2020), North Vancouver, BC, Canada (Virtual).

Phillips, W, Kapletia, D, Dalgarno, K, Hunt, P, Bibb, R, Makatsoris, H, Rafiq, Q, Roscoe, S, Omar, B, Willoughby, N, Paterson, A, Benger, J (2020) Innovation in healthcare manufacturing: transforming deployed medical care. In XXXI ISPIM Innovation Conference: Innovating in Times of Crisis; Proceedings of the XXXI ISPIM Innovation Conference, Online.

Vlachaki, A, Paterson, A, Porter, S, Bibb, R (2019) Developing a questionnaire to explore people’s attitudes towards emotionally-driven prostheses: a pilot study. In International Association of Societies of Design Research Conference 2019 (IASDR 2019), Design Revolutions, Manchester, UK.

Christogianni, A, Bibb, R, Evangelou, N, Filingeri, D (2019) High-resolution whole-body mapping of warm and cold thermosensitivity in people with multiple sclerosis. In 35th Congress of the European-Committee-for-Treatment-and-Research-in-Multiple-Sclerosis (ECTRIMS) / 24th Annual Conference of Rehabilitation in MS; Multiple Sclerosis Journal, Stockholm, Sweden, pp.886-886, DOI: 10.1177/1352458519872904.

Christogianni, A, O'Garro, J, Bibb, R, Evangelou, N, Filingeri, D (2019) A patient-centred evaluation of thermal resilience practices in temperature-sensitive people with multiple sclerosis. In 35th Congress of the European-Committee-for-Treatment-and-Research-in-Multiple-Sclerosis (ECTRIMS) / 24th Annual Conference of Rehabilitation in MS; Multiple Sclerosis Journal, Stockholm, Sweden, pp.886-886, DOI: 10.1177/1352458519872904.

Pradel, P, Campbell, I, Bibb, R (2019) When design never ends - a future scenario for product development. In International Conference on Engineering Design, ICED19; Proceedings of the Design Society: International Conference on Engineering Design, Delft, The Netherlands, pp.829-838, DOI: 10.1017/dsi.2019.87.

Vlachaki, A, Paterson, A, Porter, S, Bibb, R (2018) A survey of prosthetic preferences in the UK and Greece. In DRS2018 International Conference Proceedings, Limerick: Ireland, pp.747-762, ISBN: 9781912294176.

Kelly, S, Paterson, A, Bibb, R (2018) Design rules for additively manufactured wrist splints created using design of experiment methods. In 2018 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2018), Austin, TX, USA.

Vlachaki, A, Paterson, A, Porter, S, Bibb, R (2018) Investigating the preferences of prosthetic limb users: An online survey [Abstract]. In International Central European ISPO Conference 2018, Portoroz, Slovenia,ISBN: 9789612887346.

Zhu, Z, Pradel, P, Bibb, R, Moultrie, J (2017) Economic analysis of plastic additive manufacturing for production of end use products: a preliminary study. In Rapid Design, Prototyping & Manufacturing (RDPM2017), Newcastle.

Pradel, P, Zhu, Z, Bibb, R, Moultrie, J (2017) Complexity is not for free: the impact of component complexity on additive manufacturing build time. In Rapid Design, Prototyping & Manufacturing (RDPM2017), Newcastle.

Pradel, P, Bibb, R, Zhu, Z, Moultrie, J (2017) Exploring shape complexity factors in material deposition and material jetting build time. In Additive Manufacturing for Products and Applications 2017, Zurich,ISBN: 9783319668666.

Zhu, Z, Pradel, P, Bibb, R, Moultrie, J (2017) A framework for designing end use products for direct manufacturing using additive manufacturing technologies. In International Conference on Engineering Design 2017, Vancouver,ISBN: 9781904670933.

Pyatt, C, Kelly, S, Paterson, A, Bibb, R, Sinclair, M (2017) Giving patients what they want: proposing additive manufacture as a method to design and fabricate wrist splints. In , Lancaster University.

Han, X, Bibb, R, Harris, R (2016) Artificial Vascular Bifurcations – Design and Modelling. In The Second CIRP Conference on Biomanufacturing, University of Manchester.

Johnson, A, Zarezadeh, H, Han, X, Bibb, R, Harris, R (2016) Establishing in-process inspection requirements for material extrusion additive manufacturing [conference paper]. In Fraunhofer Direct Digital Manufacturing Conference, Berlin.

Kudus, SIA, Campbell, RI, Bibb, RJ (2016) Assessing the value of 3D printed personalised products. In .

Kelly, S, Paterson, A, Bibb, R (2015) A review of wrist splint designs for additive manufacture. In Rapid Design Prototyping and Manufacture Conference, Design School, Loughborough University.

Yavari, H, Kudus, SIA, Campbell, I (2015) User involvement in design: a case study of using an AM-enabled mass customisation and personalisation (MC&P) toolkit. In 14th Conference on Rapid Design, Prototyping & Manufacturing, Loughborough University.

Payne, T, Mitchell, S, Bibb, R, Waters, M (2014) Initial validation of a relaxed human soft tissue simulant for sports impact surrogates. In , ENGINEERING OF SPORT 10, Sheffield Hallam Univ, Sheffield, ENGLAND, pp.533-538, DOI: 10.1016/j.proeng.2014.06.092.

Ollyn, MG, Bibb, RJ, Torrens, GE, Molwane, OB (2013) Determine the level of design awareness and investigate user-centred design (UCD) approaches in Botswana's Companies. In Gaborone International Design Conference (GIDEC), Gaborone, Botswana, pp.1-4.

Bingham, GA, Paterson, AM, Bibb, RJ, Johnson, A (2013) Additive manufactured textiles for high performance stab resistant applications. In Advances in Functional Textiles, Manchester, UK, pp.1-3.

Bingham, GA, Bibb, RJ, Paterson, AM, Johnson, A (2013) Additive manufactured textiles: design modelling and applications. In 1st International Conference on Digital Fashion, London College of Fashion, UAL, London, UK, pp.1-3.

Paterson, AM, Bibb, Campbell, (2012) Evaluation of a three-dimensional Computer Aided Design workflow for upper extremity splint design to support Additive Manufacture. In 13th National Conference on Rapid Design, Prototyping and Manufacture, Lancaster University, pp.71-80.

Paterson, AM, Bibb, Campbell, (2012) Evaluation of a digitised splinting approach with multi-material functionality using Additive Manufacturing Technologies. In Twenty Third Annual International Solid Freeform Fabrication Symposium, University of Texas at Austin, pp.71-80.

Paterson, AMJ, Bibb, RJ, Campbell, RI (2012) Evaluation of a refined 3D CAD workflow for upper-extremity splint design to support Additive Manufacture. In Bocking, CE and Rennie, AEW (ed) Proceedings of 13th National Conference on Rapid Design, Prototyping and Manufacture [RPDM 2012], Lancaster University, Lancaster, pp.61-70, ISBN: 978-0-9566643-2-7.

Paterson, AMJ, Bibb, RJ, Campbell, RI (2012) Evaluation of a digitized splinting approach with multiple-material functionality using additive manufacturing technologies. In Bourell, DL, Crawford, RH, Seepersad, CC, Beaman, JJ, Marcus, H (ed) Proceedings of 23rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, Austin, Texas, USA, pp.656-672.

Paterson, AM, Bibb, Campbell, (2011) Digitisation of the splinting process: development of a CAD strategy for splint design and fabrication. In 12th National Conference on Rapid Design, Prototyping and Manufacturing, Lancaster University, pp.97-104.

Winder, RJ, Thompson, D, Bibb, RJ (2011) Comparison of additive manufacturing materials and human tissues in computed tomography scanning. In Bocking, E, C, Rennie, Eds, AW (ed) 12th National Conference on Rapid Design, Prototyping and Manufacture, 17 June 2011, RDPM 2011, Lancaster University, pp.79-86, ISBN: 978-0-9566643-1-0.

Paterson, AMJ, Bibb, RJ, Campbell, RI (2011) Digitisation of the splinting process: Development of a CAD strategy for splint design and fabrication. In Bocking, E, C, Rennie, Eds, AW (ed) 12th National Conference on Rapid Design, Prototyping and Manufacture, 17 June 2011, RDPM 2011, Lancaster University, pp.97-104, ISBN: 978-0-9566643-1-0.

Patterson, AMJ, Bibb, RJ, Campbell, RI (2010) A review of existing anatomical data capture methods to support the mass customisation of wrist splints. In Jacobson, DM, Rennie, AEW, Bocking, CE (ed) 11th National Conference on Rapid Design, Prototyping & Manufacturing, 11 September 2010, Proceedings of the 11th National Conference on Rapid Design, Prototyping & Manufacturing, Lancaster University, pp.97-108, ISBN: 978-0-9566643-0-3.

Bibb, RJ (2008) Technological Developments in Medical Applications of Rapid Prototyping & Manufacturing Technology over the last Decade. In 9th International Conference on Rapid Product Development, Proceedings of Rapid Product Development Society, Bloemfontein, South Africa.

Bibb, RJ and Thomas, D (2008) Identifying the Geometric Constraints and Process Specific Challenges of Selective Laser Melting. In Time Compression Technologies Rapid Manufacturing Conference 2008, Coventry, West Midlands.

Bibb, RJ (2008) 10 Years Progress in Medical Applications of Rapid Prototyping. In Jacobson, D, Bocking, E, C, Rennie, eds, AEW (ed) 9th National Conference on Rapid Design, Prototyping & Manufacture, CRDM/Lancaster University, pp.1-10, ISBN: 978-0-948314-55-1.

Thomas, D and Bibb, RJ (2008) An Investigation into the Geometric Constraints of Selective Laser Melting for the Development of Design Rules. In Jacobson, D, Bocking, E, C, Rennie, eds, AEW (ed) 9th National Conference on Rapid Design, Prototyping & Manufacture, CRDM/Lancaster University, pp.11-20, ISBN: 978-0-948314-55-1.

Steward, T, Tong, S, Bibb, RJ, Millward, H (2007) Rapid Manufacturing for Premium Aircraft Seating. In Time Compression Technologies 2007 Rapid Manufacturing Conference Proceedings, Coventry, pp.48-53.

Bibb, RJ (2007) Rapid Manufacturing of Medical Devices using Selective Laser Melting. In Proceedings of the 2nd International Conference on Rapid Manufacturing, Loughborough, pp.49-58.

Thomas, D and Bibb, RJ (2007) Baseline build-style development of Selective Lase Melting high density functional parts. In Jacobson, D, Bocking, CE, Rennie, AEW (ed) 8th National Conference on Rapid Design, Prototyping & Manufacture, Lancaster, pp.105-114, ISBN: 9-780948314-537.

Bibb, RJ (2006) Rapid Manufacturing: The future of medical devices. In TCT 2006 Rapid Manufacturing Conference Proceedings, Gaydon, Warwickshire, pp.85-92.

Irlam, J, Bibb, RJ, Stephens, J, Thorne, W (2006) The importance of a focused front-end in the rapid product development process. In 6th International Symposium on Tools and Methods of Competitive Engineering, Ljubljana, Slovenia, pp.1241-1242.

Eggbeer, D, Bibb, RJ, Evans, P (2006) Specifications for non-contact, scanning, computer-aided design and rapid prototyping technologies in the production of soft tissue, facial prosthesis. In Bocking, E, C, Rennie, A, Jacobson, eds, D (ed) 7th National Conference on Rapid Design, Prototyping & Manufacture, CRDM/Lancaster University, pp.67-77, ISBN: 0-948314-494.

Bibb, RJ, Eggbeer, D, Bocca, A, Sugar, A (2005) A Rapid design and manufacture of custom fitting stainless steel surgical guides. In Bocking, E, C, Rennie, A, Jacobson, eds, D (ed) 6th National Conference on Rapid Design, Prototyping & Manufacture, CRDM/Lancaster University, pp.65-72, ISBN: 0-9737783-1-8.

Knox, J, Sugar, AW, Bibb, RJ, Kau, CH, Evans, P, Bocca, A, Hartles, F (2004) The use of 3D Technology in the Mutidisciplinary Management of Facial Disproportion. In Proceeedings of the 6th International Symposium on Computer Methods in Biomechanics & Biomedical Engineering, Madrid, Spain,ISBN: 0-9549670-0-3.

Bibb, RJ, Bocca, A, Hartles, F (2004) Producing Burns Therapy Conformers Using Non-Contact Scanning and Rapid Prototyping. In Proceedings of the 6th International Symposium on Computer Methods in Biomechanics & Biomedical Engineering, Madrid, Spain,ISBN: 0-9549670-0-3.

Eggbeer, D, Evans, P, Bibb, RJ (2004) The Appropriate Application Of Computer Aided Design And Manufacture Techniques In Silicone Facial Prosthetics. In Jacobson, D, Rennie, A, Bocking, eds, C (ed) 5th National Conference on Rapid Design, Prototyping & Manufacturing, Chichester, pp.45-52, ISBN: 978-1-86058-465-7.

Bibb, RJ, Eggbeer, D, Bocca, A, Evans, P, Sugar, A (2003) Design and Manufacture of Drilling Guides for Osseointegrated Implants Using Rapid Prototyping Techniques. In Bocking, E, C, Rennie, A, Jacobson, eds, D (ed) Rapid & Virtual Prototyping & Applications, Chichester, pp.3-11, ISBN: 978-1-86058-411-4.

Freeman, P, Bibb, RJ, Kempa, R (2001) Pre-Production Prototyping of Over-Moulded Electrical Components. In MICC, Proceeding of Time Compression Technologies 2001, Manchester.

Williamson, T, Bibb, RJ, Brown, R (2000) Digitised Data Integration Issues in Rapid Prototyping & Tooling. In Proceedings of the 9th European Conference on Rapid Prototyping and Manufacturing, Athens, pp.57-64.

Bibb, RJ, Brown, R, Williamson, T, Sugar, A, Evans, P, Bocca, A (2000) The Application Of Product Development Technologies In Craniofacial Reconstruction. In Proceedings of the 9th European Conference on Rapid Prototyping and Manufacturing, Athens, pp.113-22.

Bibb, R and Brown, R (2000) The application of computer aided product development techniques in medical modelling topic: Rehabilitation and prostheses. In , Biomedical Sciences Instrumentation, pp.319-324.

Bibb, RJ, Brown, R, Wright, D (2000) A Rapid Prototyping Design Advice System for Small Companies. In The Third SMESME International Conference, Coventry University, pp.40-53.

Bibb, RJ, Lewis, A, Brown, R (2000) The application of design methods in medical modelling and reconstructive surgery. In Enderle, JDE (ed) Proceedings of the 22nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, New York, USA, pp.2517-2519, ISBN: 0-7803-6466-X.

Books

Bibb, RJ and Rennie, AEW (ed) (2016) Fourteenth Conference on Rapid Design, Prototyping and Manufacturing, Lancaster Product Development Unit, ISBN: 9781526203038.

Bibb, R, Eggbeer, D, Paterson, A (2015) Medical Modelling: The Application of Advanced Design and Rapid Prototyping Techniques in Medicine: Second Edition,ISBN: 9781782423003. DOI: 10.1016/C2014-0-01365-2.

Bibb, R (ed) (2006) Medical Modelling, CRC Press, ISBN: 9780849391064. DOI: 10.1201/9781439824375.

Bibb, RJ (2006) Medical modelling: the application of advanced design and development technologies in medicine, Woodhead Publishing Ltd, ISBN: 1-84569-138-5.

CD Objects

Bibb, RJ (2008) Technological Developments in Medical Applications of Rapid Prototyping & Manufacturing Technology over the last Decade,.

Bibb, RJ and Thomas, D (2008) Identifying the Geometric Constraints and Process Specific Challenges of Selective Laser Melting,Rapid New Publications Plc.

Steward, T, Tong, S, Bibb, RJ, Millward, H (2007) Rapid Manufacturing for Premium Aircraft Seating,Rapid News Publications Plc.

Bibb, RJ (2006) Rapid Manufacturing: The future of medical devices,Rapid News Publications Plc.

Knox, J, Sugar, AW, Bibb, RJ, Kau, CH, Evans, P, Bocca, A, Hartles, F (2004) The use of 3D Technology in the Mutidisciplinary Management of Facial Disproportion,First Numerics Ltd, Cardiff, ISBN: 0-9549670-0-3.

Bibb, RJ, Bocca, A, Hartles, F (2004) Producing Burns Therapy Conformers Using Non-Contact Scanning and Rapid Prototyping,First Numerics Ltd. Cardiff, ISBN: 0-9549670-0-3.

Freeman, P, Bibb, RJ, Kempa, R (2001) Pre-Production Prototyping of Over-Moulded Electrical Components,Rapid News Publications plc.

Chapters

Ekinci, A, Han, X, Bibb, R, Harris, R (2020) Optimised Vascular Network for Skin Tissue Engineering by Additive Manufacturing. In Virtual Prototyping and Bio Manufacturing in Medical Applications, pp.1-20, ISBN: 9783030358792. DOI: 10.1007/978-3-030-35880-8_1.

Paterson, A, Bibb, R, Downey, K, Pallari, J (2017) Products: Designing products for chronic health. In Design for Health, pp.241-259, ISBN: 9781472457424. DOI: 10.4324/9781315576619.

Bibb, R, Eggbeer, D, Paterson, A (2015) Acknowledgements. In Medical Modelling, Elsevier, pp.xv-xv, DOI: 10.1016/b978-1-78242-300-3.04001-4.

Bibb, R, Eggbeer, D, Paterson, A (2015) Future developments. In Medical Modelling, Elsevier, pp.473-475, DOI: 10.1016/b978-1-78242-300-3.00011-1.

Bibb, R, Eggbeer, D, Paterson, A (2015) Medical imaging. In Medical Modelling, Elsevier, pp.7-34, DOI: 10.1016/b978-1-78242-300-3.00002-0.

Bibb, R, Eggbeer, D, Paterson, A (2015) Working with medical scan data. In Medical Modelling, Elsevier, pp.35-63, DOI: 10.1016/b978-1-78242-300-3.00003-2.

Bibb, R, Eggbeer, D, Paterson, A (2015) Case Studies. In Medical Modelling, Elsevier, pp.99-472, DOI: 10.1016/b978-1-78242-300-3.00005-6.

Bibb, R, Eggbeer, D, Paterson, A (2015) Physical reproduction. In Medical Modelling, Elsevier, pp.65-98, DOI: 10.1016/b978-1-78242-300-3.00004-4.

Wolfaardt, J, King, B, Bibb, RJ, Verdonck, H, de Cubber, J, Sensen, CW, Soh, J (2011) Digital technology in maxillofacial rehabilitation. Chapter 7. In Beumer, J, Esposito, S, Marunick, Eds, M (ed) Maxillofacial Rehabilitation: Prosthodontic and Surgical Management of Cancer-Related, Acquired and Congenital Defects of the Head and Neck. [Third Edition], Quintessence, pp.P355-373, ISBN: 978-0-86715-498-6.

Bibb, RJ, Eggbeer, D, Bocca, A, Evans, P, Sugar, A (2010) A custom-fitting surgical guide. In Kau, CH and Richmond, S (ed) Three-Dimensional Imaging for Orthodontics and Maxillofacial Surgery, Wiley-Blackwell, pp.239-248, ISBN: 978-1405162401.

Bibb, RJ (2008) Chapter 3: Modelling and Rapid Prototyping. In Sugar, AW and Ehrenfeld, ME (ed) Imaging and Planning in Surgery: A Guide to Research, AO Publishing, pp.26-31, ISBN: 3-905363-07-0.

Minns, RJ, Russell, S, Young, S, Bibb, RJ, Moliter, P (2006) Repair of Articular Cartilage Defects Using 3-Dimensional Tissue Engineering Textile Architectures. In Anand, C, S, Kennedy, F, J, Miraftab, M, Rajendran, eds, S (ed) Medical Textiles and Biomaterials for Healthcare, Woodhead Publishing Ltd, pp.335-341, ISBN: 1-85573-683-7.

Green, CJ, Kirkpatrict, CH, Murinde, V (2005) Preface. In Green, J, D, Kirkpatrick, H, C, Murinde, eds, V (ed) Finance and Development: Surveys of Theory, Evidence and Policy, Edward Elgar, pp.xiii-xiv, ISBN: 1 84376 030 4.

Harris, RA (2004) Medical Modeling. In Wohlers, T and eds, AC (ed) Wohlers Report 2004, Rapid Prototyping & Tooling State of the Industry Annual Worldwide Progress Report, Part 8: Other Developments, Wohlers Associates, Inc. USA, pp.195-206.

Designs

Pradel, P, Bibb, R, White, J (2020) Conceptual exploration of water pump redesign for Additive Manufacturing, July 2020, Grundfos.

Pradel, P and Bibb, R (2019) Design Optimisation for Material Extrusion, October 2019, Verivide Limited.

Rimington, R, Capel, A, Christie, S, Lewis, M, Bibb, R (Accepted for publication) Integrated 12-well plate Bioreactor.

Rimington, R, Capel, A, Lewis, M, Christie, S, Bibb, R (Accepted for publication) Modular 6-well plate Bioreactor.

Rimington, R, Capel, A, Lewis, M, Christie, S, Bibb, R (Accepted for publication) Integrated Tissue Engineered Perfusion System.

Rimington, R, Capel, A, Lewis, M, Christie, S, Bibb, R (Accepted for publication) Modular Tissue Engineered Perfusion System.

Rimington, R, Capel, A, Bibb, R, Christie, S, Lewis, M (Accepted for publication) Screw Thread.

Rimington, R, Capel, A, Lewis, M, Christie, S, Bibb, R (Accepted for publication) O-ring Mould.

Rimington, R, Capel, A, Lewis, M, Christie, S, Bibb, R (Accepted for publication) Monolayer Perfusion System.

Rimington, R, Capel, A, Lewis, M, Christie, S, Bibb, R (Accepted for publication) Tissue Engineered Skeletal Muscle Scaffold.

Internet Publications

Bibb, R (2020) Expert’s Corner: Additive Manufacturing Response to COVID Crisis.

Patents

KRISTENSEN, M, JÆGER, T, Pradel, P, White, J, Bibb, R (2022) Centrifugal pump assembly.

Posters

Christogianni, A, Bibb, R, Evangelou, N, Filingeri, D (2019) The effects of heat- and cold stress-induced changes in whole-body mean skin temperature on sensory, cognitive, and motor functions in people with MS.

Christogianni, A, Bibb, R, Evangelou, N, Filingeri, D (2019) High-resolution whole-body mapping of warm and cold thermosensitivity in people with multiple sclerosis.

Christogianni, A, O'Garro, J, Bibb, R, Evangelou, N, Filingeri, D (2019) A patient-centred evaluation of thermal resilience practices in temperature-sensitive people with Multiple Sclerosis.

Vlachaki, A, Paterson, A, Porter, S, Bibb, R (2018) Investigating the preferences of prosthetic limb users: An online survey [Poster].

Johnson, A, Zarezadeh, H, Bibb, R, Harris, R, Friel, R (2015) CassaMobile a factory on the go: flexible mini-factory for local and customised production in a container.

Campbell, I, Paterson, A, Bibb, R (2014) Digitising the splinting process using computer aided design and additive manufacturing.

Reports

Pradel, P, Zhu, Z, Bibb, R, Moultrie, J (2017) Designing End Use Components for Additive Manufacturing: Exploring experiences, knowledge and information requirements, EPSRC.

Pradel, P, Zhu, Z, Bibb, R, Moultrie, J (2017) Designing end use components for additive manufacturing: Navigating an emerging field, 1, EPSRC.

Software

Paterson, A, Bibb, R, Gardner, J, White, J, Campbell, I (Accepted for publication) Loughborough University Versus Arthritis 3D Splint Design Software Prototype.

Datasets

Kayali, Y, Ding, M, Hamdallah, S, Qi, S, Bibb, R, Gleadall, A (2022) Supplementary information files for Effect of printing parameters on microscale geometry for 3D printed lattice structures, DOI: 10.17028/rd.lboro.21494106.

Bibb, R (2022) anonymised-bird-bone-identification-ALL.pdf, DOI: 10.17028/rd.lboro.19666113.

Bibb, R (2022) 3D printed bone evaluation - hard copy templates.pdf, DOI: 10.17028/rd.lboro.19666071.

Filtness, A, Bibb, R, Christogianni, A, Filingeri, D (2021) Skin wetness sensitivity across the body of Multiple Sclerosis patients - Dataset, DOI: 10.17028/rd.lboro.16716922.

Zhang, B, Gleadall, A, Belton, P, Mcdonagh, T, Bibb, R, Qi, S (2021) Data for article: New insights into the effects of porosity, pore length, pore shape and pore alignment on drug release from extrusion-based additive manufactured pharmaceuticals, DOI: 10.17028/rd.lboro.14125196.

Tetteh, S, Bibb, R, Martin, S (2018) Antimicrobial Resistance of the Silicone Elastomer, DOI: 10.17028/rd.lboro.6339305.

Pradel, P, Bibb, R, Moultrie, J, Zhu, Z (2018) Data from the survey for the EPSRC funded project Design for Additive Manufacturing (D4AM), DOI: 10.17028/rd.lboro.5972170.

Figures

Sinclair, M, Bibb, R, Pyatt, C (2019) Splint wear connections map (interactive).pdf.

Filesets

Pradel, P, Zhu, Z, Bibb, R, Moultrie, J (2018) Interview Transcripts for the EPSRC funded project Design for Additive Manufacturing (D4AM), DOI: 10.17028/rd.lboro.5972248.

Media

Evans, MA, Bibb, R, Bingham, Torrens, Sinclair, M, Atkin, J, Newsom, G, Buswell, Concrete Innovation.

Other

Sinclair, M, Bibb, R, Pyatt, C (Accepted for publication) Ethical Checklist and Participant Information for Wrist Splint Compliance study.pdf, Ethical Checklist and Participant Information sheet for Wrist Splint Compliance study with human participants.

Borgianni, Y, Pradel, P, Berni, A, Obi, M, Bibb, R (Accepted for publication) Survey workflow, Additive Manufacturing (AM) has become an established discipline in both research and education. However, to achieve its full potential AM requires a step-change in design thinking, which makes Design for AM (DfAM) education and training crucial. This document presents the workflow of an online survey aimed at investigating the uptake of DfAM in higher education. The survey collected responses from over 100 AM and DfAM educators worldwide..

Bibb, R (Accepted for publication) STL files of Mummified Bird Bones EM-14 - Version 1 - scanned within the bundle, STL files of 3 bird bones (2 joined) extracted from CT data of an experimental mummy bundle containing birds: Version 1 data.

Bibb, R (Accepted for publication) STL files of Mummified Bird Bones EM-14 - Version 2 - scanned in air, STL files of 3 bird bones extracted from CT data of bird bones recovered from an experimental mummified birds. The Version 2 data are bones scanned individually in air after being removed from the mummy bundle and cleaned. .