Journal Articles
Willmott, J, Bibb, R, Johnson, A,
Paterson, A (2023)
Three-dimension dithering and its effect on the interfacial strength of multi-material and emulated multi-material additive manufacturing processes,
Additive Manufacturing, 78(2023), 103837, ISSN: 2214-7810. DOI:
10.1016/j.addma.2023.103837.
Vlachaki, A,
Paterson, A, Porter, S, Bibb, R (2020)
Exploring users’ attitudes towards prosthesis aesthetics in the UK and Greece,
Design for Health, 4(1), pp.4-23, ISSN: 2473-5132. DOI:
10.1080/24735132.2020.1727699.
Cazon, A, Kelly, S,
Paterson, A, Bibb, R, Campbell, I (2017)
Analysis and comparison of wrist splint designs using the finite element method: Multi-material three-dimensional printing compared to typical existing practice with thermoplastics,
Proceedings of the institution of Mechanical and Manufacturing Engineering, Part H :Journal of Engineering in Medicine, 23(9), pp.881-897, ISSN: 0954-4119. DOI:
10.1177/0954411917718221.
Harte, D and
Paterson, A (2017)
The fastest field sport in the world: A case report on 3-D printed hurling gloves to help prevent injury,
Journal of Hand Therapy, ISSN: 0894-1130. DOI:
10.1016/j.jht.2017.05.015.
Cazon, A, Aizpurua, J,
Paterson, A, Bibb, R, Campbell, I (2014)
Customised design and manufacture of protective face masks combining a practitioner-friendly modelling approach and low-cost devices for digitising and additive manufacturing,
Virtual and Physical Prototyping, 9(4), pp.251-261, ISSN: 1745-2759. DOI:
10.1080/17452759.2014.958648.
Paterson, AM, Bibb, Campbell, Bingham, (2014)
Comparing Additive Manufacturing technologies for customised wrist splints,
Rapid Prototyping Journal, 21(3), pp.230-243, DOI:
10.1108/RPJ-10-2013-0099.
Paterson, A, Donnison, E, Bibb, R, Campbell, I (2014)
Computer-aided design to support fabrication of wrist splints using 3D printing: a feasibility study,
Hand Therapy, 19(4), pp.102-113, ISSN: 1758-9983. DOI:
10.1177/1758998314544802.
Paterson, AM, Bibb, RJ, Campbell, RI (2010)
A review of existing anatomical data capture methods to support the mass customisation of wrist splints,
Virtual and Physical Prototyping Journal, 5(4), pp.201-207.
Conferences
Marshall, R, Summerskill, S,
Paterson, A, Eland, A (2020)
The use of digital human modelling for the definition and contextualisation of a direct vision standard for trucks. In Hanson, L, Högberg, D, Brolin, E (ed)
6th International Digital Human Modeling Symposium 2020 (DHM2020); DHM2020. Proceedings of the 6th International Digital Human Modeling Symposium, August 31 – September 2, 2020, Skövde, Sweden and online, pp.99-107, ISBN: 9781643681047. DOI:
10.3233/ATDE200014.
Summerskill, S, Marshall, R,
Paterson, A, Eland, A (2020)
The Definition of a Common Eye Point for the Virtual Assessment of Truck Direct Vision Performance. In Hanson, L, Högberg, D, Brolin, E (ed)
6th International Digital Human Modeling Symposium 2020 (DHM2020); DHM2020. Proceedings of the 6th International Digital Human Modeling Symposium, August 31 – September 2, 2020, Skövde, Sweden and online, pp.121-130, ISBN: 9781643681047. DOI:
10.3233/ATDE200017.
Phillips, W, Kapletia, D, Dalgarno, K, Hunt, P, Bibb, R, Makatsoris, H, Rafiq, Q, Roscoe, S, Omar, B, Willoughby, N,
Paterson, A, Benger, J (2020)
Innovation in healthcare manufacturing: transforming deployed medical care. In
XXXI ISPIM Innovation Conference: Innovating in Times of Crisis; Proceedings of the XXXI ISPIM Innovation Conference, Online.
Vlachaki, A,
Paterson, A, Porter, S, Bibb, R (2019)
Developing a questionnaire to explore people’s attitudes towards emotionally-driven prostheses: a pilot study. In
International Association of Societies of Design Research Conference 2019 (IASDR 2019), Design Revolutions, Manchester, UK.
Summerskill, S, Marshall, R,
Paterson, A, Eland, A (2019)
The Development of a Direct Vision Standard for Trucks in London Using a Volumetric Approach. In
International Conference on Applied Human Factors and Ergonomics, Advances in Intelligent Systems and Computing, Washington D.C, DC, USA, pp.440-452, ISBN: 9783030205027. DOI:
10.1007/978-3-030-20503-4_40.
Kelly, S,
Paterson, A, Bibb, R (2018)
Design rules for additively manufactured wrist splints created using design of experiment methods. In
2018 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2018), Austin, TX, USA.
Lindsay, A,
Paterson, A, Graham, I (2018)
Identifying and quantifying inefficiencies within industrial parametric CAD models. In
Sixteenth International Conference on Manufacturing Research, incorporating the 33rd National Conference on Manufacturing Research, University of Skovde, Skovde, Sweden. DOI:
10.3233/978-1-61499-902-7-227.
Pyatt, C, Kelly, S,
Paterson, A, Bibb, R, Sinclair, M (2017)
Giving patients what they want: proposing additive manufacture as a method to design and fabricate wrist splints. In
, Lancaster University.
Gardner, JA, Bingham, G,
Paterson, A (2017)
A performance assessment of a developed mesh-generating algorithm: A computer-aided design modelling process to support progression within additive manufacturing. In
Rapid Design, Prototyping and Manufacture Conference, Lancaster University,ISBN: 9781527221536.
Kelly, S,
Paterson, A, Bibb, R (2015)
A review of wrist splint designs for additive manufacture. In
Rapid Design Prototyping and Manufacture Conference, Design School, Loughborough University.
Paterson, AM, Bibb, Campbell, (2012) Evaluation of a three-dimensional Computer Aided Design workflow for upper extremity splint design to support Additive Manufacture. In
13th National Conference on Rapid Design, Prototyping and Manufacture, Lancaster University, pp.71-80.
Paterson, AM, Bibb, Campbell, (2012)
Evaluation of a digitised splinting approach with multi-material functionality using Additive Manufacturing Technologies. In
Twenty Third Annual International Solid Freeform Fabrication Symposium, University of Texas at Austin, pp.71-80.
Paterson, AMJ, Bibb, RJ, Campbell, RI (2012) Evaluation of a digitized splinting approach with multiple-material functionality using additive manufacturing technologies. In Bourell, DL, Crawford, RH, Seepersad, CC, Beaman, JJ, Marcus, H (ed)
Proceedings of 23rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, Austin, Texas, USA, pp.656-672.
Paterson, AM, Bibb, Campbell, (2011) Digitisation of the splinting process: development of a CAD strategy for splint design and fabrication. In
12th National Conference on Rapid Design, Prototyping and Manufacturing, Lancaster University, pp.97-104.
